Commit Graph

13 Commits

Author SHA1 Message Date
Pedro F. Giffuni
51369649b0 sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00
Bjoern A. Zeeb
89856f7e2d Get closer to a VIMAGE network stack teardown from top to bottom rather
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.

Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.

Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.

For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.

Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.

For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).

Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.

Approved by:		re (hrs)
Obtained from:		projects/vnet
Reviewed by:		gnn, jhb
Sponsored by:		The FreeBSD Foundation
MFC after:		2 weeks
Differential Revision:	https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
Bjoern A. Zeeb
9901091eba Mfp4 @180378:
Factor out nd6 and in6_attach initialization to their own files.
  Also move destruction into those files though still called from
  the central initialization.

  Sponsored by:	CK Software GmbH
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Reviewed by:	gnn
Differential Revision:	https://reviews.freebsd.org/D5033
2016-03-22 15:43:47 +00:00
Hiroki Sato
5df1b6b57e Use FF02:0:0:0:0:2:FF00::/104 prefix for IPv6 Node Information Group
Address.  Although KAME implementation used FF02:0:0:0:0:2::/96 based on
older versions of draft-ietf-ipngwg-icmp-name-lookup, it has been changed
in RFC 4620.

The kernel always joins the /104-prefixed address, and additionally does
/96-prefixed one only when net.inet6.icmp6.nodeinfo_oldmcprefix=1.
The default value of the sysctl is 1.

ping6(8) -N flag now uses /104-prefixed one.  When this flag is specified
twice, it uses /96-prefixed one instead.

Reviewed by:		ume
Based on work by:	Thomas Scheffler
PR:			conf/174957
MFC after:		2 weeks
2013-05-04 19:16:26 +00:00
Xin LI
6f56329a25 Remove __P.
Submitted by:	kevlo
Reviewed by:	md5(1)
MFC after:	2 months
2012-10-22 21:49:56 +00:00
David E. O'Brien
b48287a32a Clean up VCS Ids. 2007-12-10 16:03:40 +00:00
SUZUKI Shinsuke
743eee666f sync with KAME regarding NDP
- introduced fine-grain-timer to manage ND-caches and IPv6 Multicast-Listeners
- supports Router-Preference <draft-ietf-ipv6-router-selection-07.txt>
- better prefix lifetime management
- more spec-comformant DAD advertisement
- updated RFC/internet-draft revisions

Obtained from: KAME
Reviewed by: ume, gnn
MFC after: 2 month
2005-10-21 16:23:01 +00:00
SUZUKI Shinsuke
d28bde669a sync with KAME regarding the following clarification in RFC3542:
- disable IPv6 operation if DAD fails for some EUI-64 link-local addresses.
 - export get_hw_ifid() (and rename it) as a subroutine for this process.

Obtained from: KAME
Reviewd by: ume, gnn
MFC after: 2 week
2005-10-19 16:43:57 +00:00
Warner Losh
caf43b0208 /* -> /*- for license, minor formatting changes, separate for KAME 2005-01-07 02:30:35 +00:00
Hajimu UMEMOTO
68795b9947 nuku unused functions in6_nigroup_attach() and
in6_nigroup_detach().

Obtained from:	KAME
2003-10-31 15:51:28 +00:00
Hajimu UMEMOTO
3384154590 Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
  - The definitions of SADB_* in sys/net/pfkeyv2.h are still different
    from RFC2407/IANA assignment because of binary compatibility
    issue.  It should be fixed under 5-CURRENT.
  - ip6po_m member of struct ip6_pktopts is no longer used.  But, it
    is still there because of binary compatibility issue.  It should
    be removed under 5-CURRENT.

Reviewed by:	itojun
Obtained from:	KAME
MFC after:	3 weeks
2001-06-11 12:39:29 +00:00
Jun-ichiro itojun Hagino
686cdd19b1 sync with kame tree as of july00. tons of bug fixes/improvements.
API changes:
- additional IPv6 ioctls
- IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8).
  (also syntax change)
2000-07-04 16:35:15 +00:00
Yoshinobu Inoue
82cd038d51 KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP
for IPv6 yet)

With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-11-22 02:45:11 +00:00