yet, so we can protect some locking code from being interrupted by signal
handling. When KSE mode is turned on, reset the thread flag to scope process
except we are running in 1:1 mode which we needn't turn it off.
Also remove some unused member variables in structure kse.
Tested by: deischen
archs that can (or are required to) have per-thread registers.
Tested on i386, amd64; marcel is testing on ia64 and will
have some follow-up commits.
Reviewed by: davidxu
This eliminates ping-ponging of locks, where the idle KSE wakes
up only to find the lock it needs is being held. This gives
little or no gain to M:N mode but greatly speeds up 1:1 mode.
Reviewed & Tested by: davidxu
is system bound thread and when it is blocked, no upcall is generated.
o Add ability to libkse to allow it run in pure 1:1 threading mode,
defining SYSTEM_SCOPE_ONLY in Makefile can turn on this option.
o Eliminate code for installing dummy signal handler for sigwait call.
o Add hash table to find thread.
Reviewed by: deischen
signals were changed in kernel, it will retrieve the pending set and
try to find a thread to dispatch the signal. The dispatching process
can be rolled back if the signal is no longer in kernel.
o Create two functions _thr_signal_init() and _thr_signal_deinit(),
all signal action settings are retrieved from kernel when threading
mode is turned on, after a fork(), child process will reset them to
user settings by calling _thr_signal_deinit(). when threading mode
is not turned on, all signal operations are direct past to kernel.
o When a thread generated a synchoronous signals and its context returned
from completed list, UTS will retrieve the signal from its mailbox and try
to deliver the signal to thread.
o Context signal mask is now only used when delivering signals, thread's
current signal mask is always the one in pthread structure.
o Remove have_signals field in pthread structure, replace it with
psf_valid in pthread_signal_frame. when psf_valid is true, in context
switch time, thread will backout itself from some mutex/condition
internal queues, then begin to process signals. when a thread is not
at blocked state and running, check_pending indicates there are signals
for the thread, after preempted and then resumed time, UTS will try to
deliver signals to the thread.
o At signal delivering time, not only pending signals in thread will be
scanned, process's pending signals will be scanned too.
o Change sigwait code a bit, remove field sigwait in pthread_wait_data,
replace it with oldsigmask in pthread structure, when a thread calls
sigwait(), its current signal mask is backuped to oldsigmask, and waitset
is copied to its signal mask and when the thread gets a signal in the
waitset range, its current signal mask is restored from oldsigmask,
these are done in atomic fashion.
o Two additional POSIX APIs are implemented, sigwaitinfo() and sigtimedwait().
o Signal code locking is better than previous, there is fewer race conditions.
o Temporary disable most of code in _kse_single_thread as it is not safe
after fork().
by moving the definition of struct ksd to pthread_md.h and removing
the inclusion of ksd.h from thr_private.h (which has the definition
of struct kse and kse_critical_t). This allows ksd.h to have inline
functions that use struct kse and kse_critical_t and generally
yields a cleaner implementation at the cost of not having all ksd
related types/definitions in one header.
Implement the ksd functionality on ia64 by using inline functions
and permanently remove ksd.c from the ia64 specific makefile.
This change does not clean up the i386 specific version of ksd.h.
NOTE: The ksd code on ia64 abuses the tp register in the same way
as it is abused in libthr in that it is incompatible with the
runtime specification. This will be address when support for TLS
hits the tree.
path, making them suitable for direct use by the dynamic loader.
Register libpthread-specific locking API with rtld on startup.
This still has some rough edges with signals which should be
addresses later.
Approved by: re (scottl)
low-level lock used by the libpthread implementation. In the
future, we'll eliminate spinlocks from libc but that will wait
until after 5.1-release.
Don't call an application signal handler if the handler is
the same as the library-installed handler. This seems to
be possible after a fork and is the cause of konsole hangs.
Approved by: re@ (jhb)
lock held (_thr_sched_switch_unlocked()) and use this to avoid
dropping the scheduler lock and having the scheduler retake the
same lock again.
Add a better way of detecting if a low-level lock is in use.
When switching out a thread due to blocking in the UTS, don't
switch to the KSE's scheduler stack only to switch back to
another thread. If possible switch to the new thread directly
from the old thread and avoid the overhead of the extra
context switch.
Check for pending signals on a thread when entering the scheduler
and add them to the threads signal frame. This includes some
other minor signal fixes.
Most of this was a joint effor between davidxu and myself.
Reviewed by: davidxu
Approved by: re@ (blanket for libpthread)
KSEs when it's thread exits; allow the GC handler to do that.
o Make spinlock/spinlock critical regions.
The following were submitted by davidxu
o Alow thr_switch() to take a null mailbox argument.
o Better protect cancellation checks.
o Don't set KSE specific data when creating new KSEs; rely on the
first upcall of the KSE to set it.
o Add the ability to set the maximum concurrency level and do this
automatically. We should have a way to enable/disable this with
some sort of tunable because some applications may not want this
to be the default.
o Hold the scheduling lock across thread switch calls.
o If scheduling of a thread fails, make sure to remove it from the list
of active threads.
o Better protect accesses to a joining threads when the target thread is
exited and detached.
o Remove some macro definitions that are now provided by <sys/kse.h>.
o Don't leave the library in threaded mode if creation of the initial
KSE fails.
o Wakeup idle KSEs when there are threads ready to run.
o Maintain the number of threads active in the priority queue.
lock level is 0. Thus far, the threads implementation doesn't use
mutexes or condition variables so the lock level should be 0.
Save the return value when trying to schedule a new thread and
use this to return an error from pthread_create().
Change the max sleep time for an idle KSE to 1 minute from 2 minutes.
Maintain a count of the number of KSEs within a KSEG.
With these changes scope system threads seem to work, but heavy
use of them crash the kernel (supposedly VM bugs).
to be instances where the kernel doesn't properly save and/or
restore it.
Use noupcall and nocompleted flags in the KSE mailbox. These
require kernel changes to work which will be committed sometime
later. Things still work without the changes.
Remove the general kse entry function and use two different
functions -- one for scope system threads and one for scope
process threads. The scope system function is not yet enabled
and we use the same function for all threads at the moment.
Keep a copy of the KSE stack for the case that a KSE runs
a scope system thread and uses the same stack as the thread
(no upcalls are generated, so a separate stack isn't needed).
This isn't enabled yet.
Use a separate field for the KSE waiting flag. It isn't
correct to use the mailbox flags field.
The following fixes were provided by David Xu:
o Initialize condition variable locks with thread versions
of the low-level locking functions instead of the kse versions.
o Enable threading before creating the first thread instead
of after.
o Don't enter critical regions when trying to malloc/free
or call functions that malloc/free.
o Take the scheduling lock when inheriting thread attributes.
o Check the attribute's stack pointer instead of the
attributes stack size for null when allocating a
thread's stack.
o Add a kseg reinit function so we don't have to destroy and
then recreate the same lock.
o Check the return value of kse_create() and return an
appropriate error if it fails.
o Don't forget to destroy a thread's locks when freeing it.
o Examine the correct flags word for checking to see if
a thread is in a synchronization queue.
Things should now work on an SMP kernel.
environment. This includes support for multiple KSEs and KSEGs.
The ability to create more than 1 KSE via pthread_setconcurrency()
is in the works as well as support for PTHREAD_SCOPE_SYSTEM threads.
Those should come shortly.
There are still some known issues which davidxu and I are working
on, but it'll make it easier for us by committing what we have.
This library now passes all of the ACE tests that libc_r passes
with the exception of one. It also seems to work OK with KDE
including konqueror, kwrite, etc. I haven't been able to get
mozilla to run due to lack of java plugin, so I'd be interested
to see how it works with that.
Reviewed by: davidxu
The new libpthread will provide POSIX threading support using KSE.
These files were previously repo-copied from src/lib/libc_r.
Reviewed by: deischen
Approved by: -arch
at file flags and replace it with functions that will avoid null
pointer checks.
MFC to be done by archie ;-)
PR: 42100
Reviewed by: archie, robert
MFC after: 3 days
and pthread_resume_all_np(). These suspend and resume all threads except
the current thread, respectively. The existing functions pthread_single_np()
and pthread_multi_np(), which formerly had no effect, now exhibit the same
behaviour and pthread_suspend_all_np() and pthread_resume_all_np(). These
functions have been added mostly for the native java port.
Don't allow the uthread kernel pipe to use the same descriptors as
stdio. Mostily submitted by Oswald Buddenhagen <ossi@kde.org>.
Correct some minor style nits.
of an alternate signal stack for handling signals. Let the kernel
send signals on the stack of the current thread and teach the threads
signal handler how to deliver signals to the current thread if it
needs to. Also, always store a threads context as a jmp_buf. Eventually
this will change to be a ucontext_t or mcontext_t.
Other small nits. Use struct pthread * instead of pthread_t in internal
library routines. The threads code wants struct pthread *, and pthread_t
doesn't necessarily have to be the same.
Reviewed by: jasone
return address when modifying a jmp_buf to create a new thread context.
Also set t12 with the return address.
This should fix libc_r on alpha.
With much detective work by: Bernd Walter <ticso@cicely.de>
kernel #defines to figure out where the stack is located. This stops
libc_r from exploding when the kernel is compiled with a different
KVM size. IMHO this is all kinda bogus, it would be better to just
check %esp and work from that.
- uthread_signal.c; libc_r does not wrap signal() since 1998/04/29.
- uthread_attr_setprio.c; it was never connected to the build, and
pthread_attr_setprio() does not exist in POSIX.
- uthread_sigblock.c and uthread_sigsetmask.c; these were no-ops
bloating libc_r's space.
pthread_private.h:
- Removed prototypes of non-syscalls: send().
- Removed prototypes of unused syscalls: sigpending(), sigsuspend(),
and select().
- Fixed prototype of fork().
- MFS: Fixed prototypes of <sys/socket.h> syscalls.
Reviewed by: deischen
Approved by: deischen, jasone
be malloc()ed, but they are now allocated using mmap(), just as the
default-size stacks are. A separate cache of stacks is kept for
non-default-size stacks.
Collaboration with: deischen
atomically:
1) Search _thread_list for the thread to join.
2) Search _dead_list for the thread to join.
3) Set the running thread as the joiner.
While we're at it, fix a race in the case where multiple threads try to
join on the same thread. POSIX says that the behavior of multiple joiners
is undefined, but the fix is cheap as a result of the other fix.
keep track of a joiner. POSIX only supports a single joiner, so this
simplification is acceptable.
At the same time, make sure to mark a joined thread as detached so that
its resources can be freed.
Reviewed by: deischen
PR: 24345
application to provide locking for I/O operations. This doesn't
break any of my tests, but the old behavior can be restored by
compiling with _FDLOCKS_ENABLED. This will eventually be removed
when it is obvious it does not cause any problems.
Remove most of flockfile implementation, with the exception of
flockfile_debug.
Make error messages more informational (submitted by Mike Heffner
<spock@techfour.net>, who's now known as mikeh@FreeBSD.org).
Add another check for thread library initialization (jdp, we
really need a way to get _thread_init called at program start
before any constructors are run).
_foo - wrapped system call
foo - weak definition to _foo
and for cancellation points:
_foo - wrapped system call
__foo - enter cancellation point, call _foo(), leave
cancellation point
foo - weak definition to __foo
Change use of global _thread_run to call a function to get the
currently running thread.
Make all pthread_foo functions weak definitions to _pthread_foo,
where _pthread_foo is the implementation. This allows an application
to provide its own pthread functions.
Provide slightly different versions of pthread_mutex_lock and
pthread_mutex_init so that we can tell the difference between
a libc mutex and an application mutex. Threads holding mutexes
internal to libc should never be allowed to exit, call signal
handlers, or cancel.
Approved by: -arch
