Pnpinfo is bus-specific and requires the bus name. The FDTCOMPAT_PNP_INFO()
macro makes it easier to define new FDT-based pnpinfo for busses other than
simplebus.
Differential Revision: https://reviews.freebsd.org/D20382
Many i2c slave drivers are in modules that can be unloaded. If they detach
while IO is in progress the bus would be hung forever. Conversely,
lower-layer drivers (iicbus and the hardware driver) also live in modules
and other kinds of bad things happen if they get detached while IO is in
progress. Because device_busy() propagates up to parents, marking the slave
device busy while it owns the bus solves both kinds of problems that come
with detaching i2c devices while IO is in progress.
Instead of precalculating the different speed, respect the bus frequency
and calculate the clock register parameter based on it.
If the platform didn't register the core clk, fallback on the precomputed
values (This is likely do be the case on Marvell boards).
Add the ability to use interrupts for i2c message.
We still use polling for early boot i2c transfer (for PMIC
for example) but as soon as interrupts are available use them.
On Allwinner SoC >A20 is seems that polling mode is broken for some
reason, this is now fixed by using interrupt mode.
For Allwinner also fix the frequency calculation, the one in the code
was for when the APB frequency is at 48Mhz while it is at 24Mhz on most
(all?) Allwinner SoCs. We now support both cases.
While here add more debug info when it's compiled in.
Tested On: A20, H3, A64
MFC after: 1 month
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
of years since the century, so strip the century out when converting to or
from bcd_clocktime format (the conversion routines will infer century by
pivoting on 70).
rather than relying on a set of canned EARLY_DRIVER_MODULE() statements in
the ofw_iicbus source. This means hw drivers will no longer be required to
use one of a few predefined driver names. They will also now be able to
decide themselves if they want to use DRIVER_MODULE or EARLY_DRIVER_MODULE
and to set which pass to attach on for early modules.
Mainly, this adds extern declarations for the driver and devclass variables.
It also renames ofwiicbus_devclass to ofw_iicbus_devclass to be consistant
with the way we use ofw_ prefixes on this stuff.
The driver now ensures only one thread at a time is running in the API
functions (clock_gettime() and clock_settime()) by specifically requesting
ownership of the i2c bus without using IIC_RECURSIVE, then it does all IO
using IIC_RECURSIVE so that each individual IO operation doesn't try to
re-acquire the bus.
The other IO done by the driver happens at attach or intr_config_hooks time,
when there can't be multiple threads running with the same device instance.
So, the IIC_RECURSIVE flag can be safely ORed into the wait flags for all IO
done by the driver, because it's all either done in a single-threaded
environment, or protected within a block bounded by explict
iicbus_acquire_bus() and iicbus_release_bus() calls.
The driver now ensures only one thread at a time is running in the API
functions (clock_gettime() and clock_settime()) by specifically requesting
ownership of the i2c bus without using IIC_RECURSIVE, then it does all IO
using IIC_RECURSIVE so that each individual IO operation doesn't try to
re-acquire the bus.
The other IO done by the driver happens at attach or intr_config_hooks time,
when there can't be multiple threads running with the same device instance.
So, the IIC_RECURSIVE flag can be safely ORed into the wait flags for all IO
done by the driver, because it's all either done in a single-threaded
environment, or protected within a block bounded by explict
iicbus_acquire_bus() and iicbus_release_bus() calls.
The recursive ownership support added in r321584 was unconditionally in
effect all the time -- whenever a given i2c slave device instance tried to
lock the i2c bus for exclusive use when it already owned the bus, the call
returned immediately without waiting. However, many i2c slave drivers use
bus ownership to enforce that only a single thread at a time can be using
the slave device. The recursive locking changes broke this use case.
Now there is a new flag, IIC_RECURSIVE, which can be mixed in with the
other flags passed to iicbus_acquire_bus() to allow drivers to indicate
when recursive locking is desired. Using the flag implies that the driver
is managing concurrent access to the device by different threads in some way.
This immediately fixes all existing i2c slave drivers except for the two
i2c RTC drivers which use the recursive locking feature; those will be
fixed in a followup commit.
RTC chips that have a control register bit for am/pm mode, the DS13xx series
uses one of the high bits in the hour register. Thus, when setting the time
in am/pm mode, the am/pm mode flag has to be ORed into the hour.
during startup. When a brand new chip leaves the factory, it is in a
special power-saving mode that disables most functions on the chip to
save battery power. The chip is stuck in this mode until the first write
to the time registers, which automatically clears the special power-saving
mode and starts the oscillator.
Also, the day-of-week register in this chip counts 1-7, not 0-6, so write
the values accordingly.
These changes are based on the patch submitted by Brian Scott, but I
elimated warnings since this condition is expected, and added some comments,
and so in general blame me for any mistakes.
PR: 223642
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Summary:
Existing code recognizes the mcp7941x RTC, but this RTC has an
enable bit at the same location as the "Clock Halt" bit on the ds1307, with an
opposite assertion (set == on, whereas CH set == clock stopped). Thus the
current code halts the clock, with no way to enable it.
Reviewed By: ian
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12961
RTC-8583 is time-of-day clock used in some SOHO routers. This clock has
only 2 bits for year values, but thanks to user SRAM it's possible to save
year value and keep it up to date via driver code.
Tested on Planex_MZK-W300NAG (SoC is RT2880)
Submitted by: Hiroki Mori <yamori83@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D12833
stop, read, and write methods. Some controllers don't implement these
individual operations and have only a transfer method. In that case, we
should return an indication that the device is present but doesn't support
the method, as opposed to the kobj default error ENXIO which makes it
look like the whole device is missing. Userland tools such as i2c(8) can
use the differing return values to switch between the two different i2c
IO mechanisms.
setting up the timer fails, because on some types of chips that's the
first attempt to access the device. If the chip is missing/non-responsive
then you'd get a driver that attached and didn't register the rtc, with
no clue about why. On other chip types there are inits that come before
timer setup, and they already print messages about errors.
- Add FDT probe code.
- Do i2c transfers with exclusive bus ownership.
- Use config_intrhook_oneshot() to defer chip setup because some i2c
busses can't do transfers without interrupts.
- Add a detach() routine.
- Add to module build.
This driver supports only basic timekeeping functionality. It completely
replaces the ds133x driver. It can also replace the ds1374 driver, but that
will take a few other changes in MIPS code and config, and will be committed
separately. It does NOT replace the existing ds1307 driver, which provides
access to some of the extended features on the 1307 chip, such as controlling
the square wave output signal. If both ds1307 and ds13rtc drivers are
present, the ds1307 driver will outbid and win control of the device.
This driver can be configured with FDT data, or by using hints on non-FDT
systems. In addition to the standard hints for i2c devices, it requires
a "chiptype" string of the form "dallas,ds13xx" where 'xx' is the chip id
(i.e., the same format as FDT compat strings).
