type of new slices and to change the type of existing slices. This also
has the advantage of moving a few #ifdef PC98's up to where the macros
are defined instead of in the middle of the code.
- Change the behavior of the 'T' option in the slice editor so that the
default value in the dialog box is the current type of the existing
slice rather than defaulting to changing the slice to a FreeBSD slice as
this is more intuitive.
Approved by: re
editor, in order to support specifying UFS2 as a newfs option.
(1) Support three different newfs types: NEWFS_UFS, NEWFS_MSDOS, and
NEWFS_CUSTOM. Don't mix up the arguments to them: you can't use
soft updates on an msdos file system.
(2) Distinguish adding new arguments to the newfs command line from
replacing it. Permit the addition of new arguments by the user for
NEWFS_UFS. If we entirely replace the command line provided by
sysinstall, call it NEWFS_CUSTOM. 'N' will now add additional
arguments; 'Z' will opt to replace the newfs command line entirely,
but will prompt the user with their current command line as a
starting point.
(3) Construct the newfs command line dynamically based on the options
provided by the user at label-time. Right now, this means selecting
UFS1 vs. UFS2, and the soft updates flag. Drop in some variables
to support ACLs and MAC Multilabel in the future also, but don't
expose them now.
This provides sysinstall with the ability to do more "in band" editing
of the newfs command line, so we can provide more support for the user,
but doesn't sacrifice the ability to entirely specify the newfs command
line of the user is willing to give up on the cushiness factor. It
also makes it easier for us to specify defaults in the future, and
define conditional behavior based on user configuration selections.
For now, we default to UFS1, and permit UFS2 to be used as the root
only on non-i386 systems.
While I was there, I dropped the default fragment and block sizes,
since newfs has much more sensible defaults now.
Reviewed by: jhb, marcel
Approved by: re
ia64 bits from: marcel
rather than installX11package().
- Add a perl psuedo-dist that installs the perl package. The perl
distribution is selected by default when a User distribution set is
selected. It is not selected when a Minimal distribution set is
selected. The perl distribution may be toggled manually in the
custom menu just as other distributions.
Approved by: re
bug fixed yesterday. New slices created in the fdisk editor and slices
whose sub-type is changed are of type 'mbr' if their sub-type is not a
magic type, not type 'unknown'.
Approved by: re
o Mount the EFI file system as msdosfs and not ufs as it's a FAT
file system. Introduce Mount_msdos() for this to go side-by-side
with Mount().
o Also, since mounting is performed as a command (which means it's
queued, sorted, lost, found and executed), we cannot create a
directory on the file system by calling mkdir. We must make sure
the mkdir happens after the mount. Introduce Mkdir_command() to
allow mkdir operations to be queued, sorted, lost, found and
executed as well.
Approved by: re (jhb, rwatson)
- Only declare mouse menus if WITH_MICE.
- Only declare syscons menus if WITH_SYSCONS.
- Only declare fdisk editor functions if WITH_SLICES.
Approved by: re
WITH_SYSCONS is defined.
- Only define mouse menus and mouse menu items if WITH_MICE is defined.
- Use WITH_SLICES instead of explicit lists of architectures to control
the layout of menus dependent on if slices are used on this arch or not.
- Only include the linux startup option if WITH_LINUX is defined.
- Only include the SVR4 startup option on i386. It doesn't work on sparc64,
and it is debatable that it even works on i386.
- Change the OSF1 startup option to execute configOSF1() instead of just
setting the variable so that /compat/osf1 gets created.
Tested on: i386, alpha, sparc64
Approved by: re
fdisk editor if WITH_SLICES. Before this on arch's that didn't support
slices such as alpha and sparc64 you would drop into the fdisk editor after
doing an Undo in the label editor.
Approved by: re
of an explicit list of architecture defines.
- Tweak the message prior to the label editor in the !WITH_SLICES case to
make it slightly less awkward since this is the first dialog we see after
starting an install.
- Only offer to customize syscons settings if WITH_SYSCONS.
- Offer to enable Linux compat if WITH_LINUX. Before we only did this for
i386.
- On the alpha, offer to enable OSF/1 compat after asking about Linux
compat.
- Only offer to configure moused(8) if WITH_MICE is defined.
Tested on: i386, alpha, sparc64
Approved by: re
and more maintainable.
- WITH_SYSCONS: defined on all arch's that support syscons (currently i386,
alpha, and ia64)
- WITH_MICE: defined on all arch's that support moused(8) (currently i386,
alpha, and ia64)
- WITH_SLICES: defined on all arch's that use disk slices (currently i386
and ia64)
- WITH_LINUX: defined on all arch's that support Linux binary compat
(currently i386 and alpha)
Approved by: re
the two GNOME 1-based alternatives.
While here, note that a majority of the items in this menu are not
sentences, and remove trailing dots to make the remainder consistent.
Reviewed by: marcus
Approved by: re (bmah)
of the EFI file system. This makes the EFI partition non-optional.
I don't think that the links are actually correct, given that all
the mount points are under /mnt when sysinstall is run as init.
(ie a non-upgrade). Thus: I think I need to go in once more, but
at least this doesn't get lost...
partitions marked as being of type efi. This change adds code to
1. actually run the newfs command at mount time (install.c),
2. display the newfs state on screen (label.c)
3. allow toggling of the newfs state (label.c)
Even though newfs(8)-ing FAT partitions can be of use on i386
machines in general, it has been opted to minimize impact for
now.
With this change there's no a priori difference between EFI and
FAT partitions. With this change and the corresponding change to
libdisk, we can create EFI partitions, just like regular FAT
partitions.
the loop that runs through the environment variables to be a bit more
intuitive. Also, change some 'continue's in failure cases to 'break's
instead. If we are going to fail, we should just do it.
PR: bin/40654
Submitted by: Thomas Zenker <thz@Lennartz-electronic.de> (partially)
argument as of revision 1.52 (July 12, 1996, about a month after I
graduated from high school) when 'newfs -u' support was axed, so remove it.
This also allows us to remove a hack in the create partition case where we
created the partition twice since we didn't have the size the first time.
- Disabled 'Syscons, Font', 'Syscons, Screenmap' and 'Syscons, Ttys' menus
on pc98.
- Fixed the MenuMouseType and MenuMousePort menus for pc98.
- Fixed some comments for pc98.
something applies to. So change #ifndef to an explicit list of defines.
* Treate sparc64 and ia64 as 64-bit platforms, which means larger roots.
* sparc64 should halt back to the firmware, not reset.
* sparc64 doesn't need to play MS-DOS/BIOS partition crap games.
Reviewed by: jake
actually does work. Ignore errors from kldload(2) if the errno value is
EEXIST. It would help if this return value were documented in the
kldload(2) manual page.
one can set the 'noError' variable to ignore any errors that occur for the
next command. However, the code was only unsetting 'noError' when an error
actually occurred, so if you set 'noError', the next command completed ok,
and the command after that failed, the second command's failure would be
ignored. This fixes this by performing the 'noError' check earlier and
then unsetting 'noError' after every command that is run.
Sponsored by: The Weather Channel
temporarily turn off the nonInteractive variable around the DHCP and IPv6
Yes/No questions in a network device setup so that those questions are
asked.
Also add the ability to use Bzip'ed distributions -- but this is exclusive
of being able to use Gzip'ed distributions.
Sponsored by: FreeBSD Mall, Inc.
present, this field specifies the media volume that the disc is
contained on. If the volume of a given packages is different than the
current volume of mediaDevice, then the user is prompted --
"This is disc #%d. Package %s is on disc #%d\n"
"Would you like to switch discs now?\n"
If the user selects yes, then DEVICE_SHUTDOWN is called and the user
is then prompted --
"Please remove disc #%d from you drive, and add disc #%d"
This works well for a carefully crafted INDEX file, but more work
needs to be done to sort dependencies on a given package based on the
volume that they reside on, to minimize the amount of disc flipping
required of the user.
This commit is a no-op for normal INDEX files and FreeBSD CDs. These
additional features are only used if the INDEX and cdrom.inf file have
multi-volume support.
so know we have proper PKG registration and dependency information.
This is a WIP for 5.0 DP #1, so it is still rough around the edges and
does not GC the old XFree86 3.3.6 handling stuff that should be GC'ed.
Sponsored by: FreeBSD Mall, Inc.
from CD-ROM in 4-stable. Note that in 5-current, we use devfs so this
change (hopefully) shouldn't change anything.
I'll MFC to 4-stable later.
Tested with: FreeBSD/i386, 4.5-STABLE-20020330-JPSNAP
While I'm here, make the menu entries on the documentation menu begin
with "1" instead of "2".
Reviewed by: imp, rwatson, murray
Approved by: imp, rwatson, murray
MFC after: 1 week
installed ones under /boot (which we may not even have in the
case of a cross build).
This introduced chicken and egg problem - we need boot images
early in the "depend" stage but they have not yet been built.
Work around this by excluding the generated makeboot.c source
from the "depend" list; it's okay because we hardcode all its
dependencies explicitly. We actually lose the dependency bit
on <sys/types.h> but it's probably okay too as the only thing
we use is the u_char datatype and this is unlikely to change.
After all, it's normal for sloppy cleaning to cause problems.
beast.FreeBSD.org running 5.0-CURRENT alpha has been able to
cross build i386 world with this patch.
Prodded by: gallatin
all facilities that previously relied on /proc have been rewritten
to use ptrace(). procfs has presented a substantial security
hazard for years, with several user->root compromises in the last
few years. Procfs will continue to be available but will require
administrator intervention to use.
Reviewed by: scottl, jedgar, mike, tmm
attention to the sub-optimal way that we deal with package
dependencies. Traditionally, for each package in an INDEX that the
user wants to add, we check all of the dependencies first even if the
package is already installed. With some GNOME packages, this can
cause package_extract to be called for 50 different dependencies when
we know the top level package is already installed.
The new behavior is to not check dependencies for packages that are
already installed. This fixes a bug where sysinstall gets itself into
a CPU intensive loop when trying to install sawfish gnome with the
most recent ports/INDEX. There is a bug somewhere in the ports INDEX,
but with over 6,400 ports we need to be a little more forgiving here.
block sizees larger than 8192 bytes have been resolved, as per the
following deltas:
rev 1.34 src/sys/boot/i386/boot2/boot2.c
rev 1.5 src/sys/boot/alpha/boot1/sys.c
filesystem using a block size of 8192. Since this seems unlikely to
be fixed soon (specifically in time for 4.5-RELEASE on the RELENG_4
branch), fall back to the old default block and frag sizes of 8192 and
1024 in sysinstall on the alpha.
Reported by: jhb
to recover its space into the previous partition. Revert 'D'elete
to not attempt to recover any space.
Do not auto-create /home as per release engineers decision (though
I think this is a mistake). However, all of this code will be
replaced later on anyway either with Jordan's stuff or with
some other sort of templater, so it isn't a big deal.
o Move nfs_reserved_port_only out of security profiles (where it was
set somewhat improperly) to the Security options menu directly.
Previously, the variable was set to true for Moderate, but not for
Extreme, which is at best inconsistent.
o Update the Security Profiles help file to remove reference to the
NFS reserved port.
o Note that the kernel currently defaults the sysctl to '0', but
sysinstall has changed it to '1' as a default as of late; however,
rc.conf sets the value to NO as the default. This change brings
them relatively into sync.
Sponsored by: DARPA, NAI Labs
and pull configSecurityProfile under that menu. Add a menu option
to determine whether LOMAC is enabled at boot. Probably, eventually,
many of the 'Security Profile' menu choices should be pulled out
independently into the Security Menu, so as to make them individually
selectable.
Sponsored by: DARPA, NAI Labs
The user can still toggle it back off in the label editor (or post-install
for that matter) if they explicitly do not want soft updates to be used
for some reason.
Agreed to be a good thing by: kirk
16384/2048.
Following recent discussions on the -arch mailing list, involving dillon
and mckusick, this change parallels the one made over a decade ago when
the default was bumped up from 4096/512.
This should provide significant performance improvements for most
folks, less significant performance losses for a few folks and
wasted space lost to large fragments for many folks.
For discussion, please see the following thread in the -arch archive:
Subject: Using a larger block size on large filesystems
The discussion ceases to be relevant when the issue of partitioning
schemes is raised.
have a USB mouse. Here's the deal on how this works: USB mouse have
moused run for them automatically by usbd so we don't need to setup moused
for them. We do need to setup moused for other mice though, so if the
user has a USB mouse, we don't need to do anything. Hence the wording
"Do you have a non-USB mouse installed?" for the question. The question
can be reworded as "Do you have a PS/2 or Serial mouse installed?" instead
if that is preferred.
(1) We don't need compat3x and compat4x as we build the bits on the proper
release now (vs. getting them from the XFree people).
(2) We handle the compat2x needs thru proper port dependancies now.
