Commit Graph

45 Commits

Author SHA1 Message Date
Hans Petter Selasky
478c1a9932 Set hardware stats flag to avoid double counting the number of incoming bytes.
Found by:	Ben RUBSON <ben.rubson@gmail.com>
Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-29 16:35:52 +00:00
Hans Petter Selasky
a2c320d7c7 mlx5en: Fix duplicate mbuf free-by-code.
When mlx5e_sq_xmit() returns an error code and the mbuf pointer is set,
we should not free the mbuf, because the caller will keep the mbuf in
the drbr. Make sure the mbuf pointer is correctly set upon function
exit.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:57:48 +00:00
Hans Petter Selasky
14997cc16a mlx5en: Remove unused pdev pointer.
Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:55:38 +00:00
Hans Petter Selasky
f5344e8333 mlx5en: Verify port type is ethernet before creating network device
Else the mlx5en driver might attach to infiniband ports.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:53:53 +00:00
Hans Petter Selasky
431fe47416 mlx5en: Allow setting the software MTU size below 1500 bytes
The hardware MTU size can't be set to a value less than 1500 bytes due
to side-band management support. Allow setting the software MTU size
below 1500 bytes, thus creating a mismatch between hardware and
software MTU sizes.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:51:31 +00:00
Hans Petter Selasky
7b4e6e4ac9 mlx5en: Factor out common sendqueue code for use with rate limiting SQs.
Try to reuse code to setup sendqueues when possible by making some static
functions global. Further split the mlx5e_close_sq_wait() function to
separate out reusable parts.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:47:16 +00:00
Hans Petter Selasky
81b3cdc1bb mlx5en: Properly declare doorbell lock for 32-bit CPUs.
Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:45:35 +00:00
Hans Petter Selasky
5eadc44ceb mlx5en: Optimise away duplicate UAR pointers.
This change also reduces the size of the mlx5e_sq structure so that the last
queue_state element will fit into the previous cacheline and then the mlx5e_sq
structure becomes one cacheline less for amd64.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:40:45 +00:00
Hans Petter Selasky
28f22ccea3 mlx5en: Make the mlx5e_open_cq() and mlx5e_close_cq() functions global.
Make some functions and structures global to allow for code reuse
when creating rate limiting sendqueues.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:39:15 +00:00
Hans Petter Selasky
941cd5d1a4 mlx5en: Minor completion queue control path code refactor.
Move setting of CQ moderation mode together with the other
CQ moderation parameters. Pass completion event vector as
a separate argument to mlx5e_open_cq(), because its value is
different for each call. Pass mlx5e_priv pointer instead of
mlx5e_channel pointer so that code can be used by rate
limiting sendqueues.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:37:35 +00:00
Hans Petter Selasky
98626886ee mlx5en: Separate the sendqueue from using the mlx5e_channel structure.
This change allows for reusing the transmit path for so called
rate limited senqueues. While at it optimise some pointer lookups
in the fast path.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:35:45 +00:00
Hans Petter Selasky
cb4e4a6ed6 Update the MLX5 core module:
- Add new firmware commands and update existing ones.
- Add more firmware related structures and update existing ones.
- Some minor fixes, like adding missing \n to some prints.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-09-16 11:28:16 +00:00
Hans Petter Selasky
351a9c7c0b Increase the maximum RX/TX queue size. This allows for a RX/TX queue
size of 16384 mbufs. Previously the limit was 8192.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-08-22 13:43:25 +00:00
Hans Petter Selasky
5f9e5b5e62 Fix for use after free.
Clear the device description to avoid use after free because the
bsddev is not destroyed when the mlx5en module is unloaded. Only when
the parent mlx5 module is unloaded the bsddev is destroyed. This fixes
a panic on listing sysctls which refer strings in the bsddev after the
mlx5en module has been unloaded.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-08-09 07:43:15 +00:00
Hans Petter Selasky
57d5dd7907 Switch to the new block based LRO input function for the mlx5en
driver. This change significantly increases the overall RX aggregation
ratio for heavily loaded networks handling 10-80 thousand simultaneous
connections.

Remove the turbo LRO code and all references to it which has now been
superceeded by the tcp_lro_queue_mbuf() function.

Tested by:	Netflix
Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-08-08 16:22:16 +00:00
Hans Petter Selasky
5b0c29decf Use correct Q-counter output array.
Sponsored by:	Mellanox Technologies
Approved by:	re (kib)
MFC after:	3 days
2016-06-23 09:23:37 +00:00
Hans Petter Selasky
76a5241f2c Add SR-IOV guest support to the mlx5en driver.
This patch adds the missing pieces needed for device setup using the
mlx5en driver inside a virtual machine which is providing hardware
access through SR-IOV.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-06-07 13:58:52 +00:00
Sepherosa Ziehau
36ad8372d4 net: Use M_HASHTYPE_OPAQUE_HASH if the mbuf flowid has hash properties
Reviewed by:	hps, erj, tuexen
Sponsored by:	Microsoft OSTC
Differential Revision:	https://reviews.freebsd.org/D6688
2016-06-07 04:51:50 +00:00
Hans Petter Selasky
fa201e28fc Prepare for activation of LinuxKPI module parameters as read-only
tunable SYSCTL's. Linux module parameters are associated with the
module they belong to. FreeBSD does not share this concept of a parent
module. Instead add macros which define the prefix to use for the
module parameters in the LinuxKPI consumers.

While at it convert all "bool" LinuxKPI module parameters to "byte"
type, because we don't have a "bool" type of SYSCTL in FreeBSD.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2016-05-25 12:03:21 +00:00
Hans Petter Selasky
82d2623e5a Verify one sysctl parameter at a time. When a mlx5en sysctl parameter
is updated only verify the changed one instead of all.

No functional change.

Sponsored by:	Mellanox Technologies
Tested by:	Netflix
MFC after:	1 week
2016-05-20 07:07:27 +00:00
Hans Petter Selasky
af89c4aff6 Optimise use of doorbell and remove redundant NOPs
Store the last doorbell write in the mlx5e_sq structure and write the
doorbell to the hardware when the transmit routine finishes
transmitting all queued mbufs.

Sponsored by:	Mellanox Technologies
Tested by:	Netflix
MFC after:	1 week
2016-05-20 06:59:38 +00:00
Hans Petter Selasky
376bcf6331 Implement TX completion event interleaving.
This patch implements a sysctl which allows setting a factor, N, for
how many work queue elements can be generated before requiring a
completion event. When a completion event happens the code simulates N
completion events instead of only one. When draining a transmit queue,
N-1 NOPs are transmitted at most, to force generation of the final
completion event.  Further a timer is running every HZ ticks to flush
any remaining data off the transmit queue when the tx_completion_fact
> 1.

The goal of this feature is to reduce the PCI bandwidth needed when
transmitting data.

Sponsored by:	Mellanox Technologies
Tested by:	Netflix
MFC after:	1 week
2016-05-20 06:54:58 +00:00
Hans Petter Selasky
83c5d190fe Correct some error codes to native FreeBSD ones.
Sponsored by:	Mellanox Technologies
Tested by:	Netflix
MFC after:	1 week
2016-04-29 11:01:06 +00:00
Hans Petter Selasky
21dd652701 Add function to detect the presence of a port module and use this
function to error out early when no port module is present and doing
eeprom access. This also prevents error codes from filling up in
dmesg.

Sponsored by:	Mellanox Technologies
Tested by:	Netflix
MFC after:	1 week
2016-04-29 11:00:12 +00:00
Sepherosa Ziehau
6dd38b8716 tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication
And factor out tcp_lro_rx_done, which deduplicates the same logic with
netinet/tcp_lro.c

Reviewed by:	gallatin (1st version), hps, zbb, np, Dexuan Cui <decui microsoft com>
Sponsored by:	Microsoft OSTC
Differential Revision:	https://reviews.freebsd.org/D5725
2016-04-01 06:28:33 +00:00
Hans Petter Selasky
d7633a3070 Fix an issue where the network adapter could be left in down state
after changing the HW LRO sysctl when previously in up state.

Reviewed by:	gnn
Sponsored by:	Mellanox Technologies
MFC after:	5 days
Differential Revision:	https://reviews.freebsd.org/D4941
2016-01-19 10:24:47 +00:00
Hans Petter Selasky
636d1fec4d Add clarifying comment about CQE zipping.
Reviewed by:	gnn
Sponsored by:	Mellanox Technologies
MFC after:	5 days
Differential Revision:	https://reviews.freebsd.org/D4940
2016-01-19 10:19:33 +00:00
Hans Petter Selasky
1558d49bb1 Declare local variables at top of function.
Reviewed by:	gnn
Sponsored by:	Mellanox Technologies
MFC after:	5 days
Differential Revision:	https://reviews.freebsd.org/D4939
2016-01-19 10:17:24 +00:00
Hans Petter Selasky
4d3b91a762 Allow RX and TX pause frames to be set through ifconfig.
Reviewed by:	gnn
Sponsored by:	Mellanox Technologies
MFC after:	5 days
Differential Revision:	https://reviews.freebsd.org/D4817
2016-01-19 10:10:02 +00:00
Hans Petter Selasky
f03f517b5e Add support for modifying coalescing parameters runtime.
MFC after:	1 week
Sponsored by:	Mellanox Technologies
2015-12-30 15:01:47 +00:00
Hans Petter Selasky
4fbd91a5af Allow I2C to read address 0x51 as well as address 0x50.
MFC after:	1 week
Submitted by:	Shahar Klein <shahark@mellanox.com>
Sponsored by:	Mellanox Technologies
2015-12-30 14:58:55 +00:00
Hans Petter Selasky
4f18ce8ae0 10G ER/LR should present itself as LR.
MFC after:	1 week
Submitted by:	Shahar Klein <shahark@mellanox.com>
Sponsored by:	Mellanox Technologies
2015-12-30 14:54:08 +00:00
Hans Petter Selasky
90cc1c7724 Add support for CQE zipping. CQE zipping reduces PCI overhead by
coalescing and zipping multiple CQEs into a single merged CQE. The
feature is enabled by default and can be disabled by a sysctl.

Implementing this feature mlx5_cqwq_pop() has been separated from
mlx5e_get_cqe().

MFC after:	1 week
Submitted by:	Mark Bloch <markb@mellanox.com>
Differential Revision:	https://reviews.freebsd.org/D4598
Sponsored by:	Mellanox Technologies
2015-12-28 18:50:18 +00:00
Hans Petter Selasky
ec0143b260 Add support for sysctl tunables to 10-stable and older. Pushed through
head first to simplify driver maintenance.

MFC after:	1 week
Submitted by:	Drew Gallatin <gallatin@freebsd.org>
Differential Revision:	https://reviews.freebsd.org/D4552
Sponsored by:	Mellanox Technologies
2015-12-28 18:36:00 +00:00
Hans Petter Selasky
ee41fc8f8c Make the eeprom dump function more readable and rename variables for
better clarity.

MFC after:	1 week
Submitted by:	Daria Genzel <dariaz@mellanox.com>
Differential Revision:	https://reviews.freebsd.org/D4551
Sponsored by:	Mellanox Technologies
2015-12-28 18:28:18 +00:00
Hans Petter Selasky
98a998d5e7 Update the mlx5 shared driver code to the latest version, which
include the following list of changes:

- Added eswitch ACL table management
  Introduce API for managing ACL table.
  This API include the following features:
  1) vlan filter - for VST/VGT+ support.
  2) spoofcheck.
  3) robust functionality to allow/drop general untagged/tagged traffic.
  4) support for both ingress and egress ACL types.

- Added loopback filter to the vacl table.

- Added multicast list set in the vPort context

- Added promiscuous mode set in the vPort context

- Set the vlan list in vPort context
  1) Check caps if VLAN list is not longer than FW supports
  2) Set MODIFY_NIC_VPORT_CONTEXT command

- Changed MLX5_EEPROM_MAX_BYTES from 48 to 32 so that a single EEPROM
  reading cannot cross the 128-byte boundary. Previously reading the
  MCIA register was done in batches of 48 bytes. The third reading
  would then by-pass the 127th byte, which means that part of the low
  page and part of the high page would be read at the same time, which
  created a bug:
    1st: 0-47 bytes
    2nd: 48-95 bytes
    3rd: 96-143 bytes

MFC after:	1 week
Sponsored by:	Mellanox Technologies
Differential Revision:	https://reviews.freebsd.org/D4411
2015-12-07 13:16:48 +00:00
Hans Petter Selasky
278ce1c919 Add full support for Receive Side Scaling, RSS, to the mlx5en
driver. This includes binding all interrupt and worker threads
according to the RSS configuration, setting up correct Toeplitz
hashing keys as given by RSS and setting the correct mbuf
hashtype for all received traffic.

MFC after:	1 week
Sponsored by:	Mellanox Technologies
Differential Revision:	https://reviews.freebsd.org/D4410
2015-12-07 12:38:51 +00:00
Hans Petter Selasky
74540a3183 Add support for setting the TX moderation mode via a sysctl entry. TX
completion events can be moderated in the same way like RX completion
events. Expose this functionality by a sysctl variable.

MFC after:	1 week
Sponsored by:	Mellanox Technologies
Differential Revision:	https://reviews.freebsd.org/D4409
2015-12-07 11:04:50 +00:00
Hans Petter Selasky
2a5ac376e4 The firmware no longer supports setting a port MTU of zero bytes.
Set the port MTU and then query it and report if any problems instead.

MFC after:	1 week
Submitted by:	Shahar Klein <shahark@mellanox.com>
Sponsored by:	Mellanox Technologies
Differential Revision:	https://reviews.freebsd.org/D4408
2015-12-07 10:57:42 +00:00
Hans Petter Selasky
bb3853c6bd Style changes, mostly automated.
Differential Revision:	https://reviews.freebsd.org/D4179
Submitted by:	Daria Genzel <dariaz@mellanox.com>
Sponsored by:	Mellanox Technologies
MFC after:	3 days
2015-11-19 10:28:51 +00:00
Hans Petter Selasky
ee09079968 Accumulate out of RX buffers into a 64-bit value and subtract out of
RX buffers from number of received packets.

Differential Revision:	https://reviews.freebsd.org/D4178
Submitted by:	Drew Gallatin <gallatin@freebsd.org>
Sponsored by:	Mellanox Technologies
MFC after:	3 days
2015-11-19 10:23:10 +00:00
Hans Petter Selasky
36c1007d35 Maintain the "hw_lro" configuration variable correctly.
Setting sysctl dev....conf.hw_lro may fail if the net device lro is
turned off. Due to the nature of our sysctl handler we need to set the
values back to 0 and issue an error.

Differential Revision:	https://reviews.freebsd.org/D4177
Submitted by:	Shahar Klein <shahark@mellanox.com>
Sponsored by:	Mellanox Technologies
MFC after:	3 days
2015-11-19 10:18:13 +00:00
Hans Petter Selasky
7e1b8bc0c9 Print cable name, if cable type is not recognized.
Differential Revision:	https://reviews.freebsd.org/D4180
Submitted by:	Mark Bloch <markb@mellanox.com>
Sponsored by:	Mellanox Technologies
MFC after:	3 days
2015-11-19 10:10:52 +00:00
Hans Petter Selasky
03ab395e29 Compile fix for 32-bit platforms:
- The Linux timers data field is "unsigned long".

Sponsored by:	Mellanox Technologies
MFC after:	2 weeks
2015-11-12 09:52:37 +00:00
Hans Petter Selasky
dc7e38ac4d Add mlx5 and mlx5en driver(s) for ConnectX-4 and ConnectX-4LX cards
from Mellanox Technologies. The current driver supports ethernet
speeds up to and including 100 GBit/s. Infiniband support will be
done later.

The code added is not compiled by default, which will be done by a
separate commit.

Sponsored by:	Mellanox Technologies
MFC after:	2 weeks
2015-11-10 12:20:22 +00:00