Commit Graph

9 Commits

Author SHA1 Message Date
Matt Macy
feeef8509b Fix PCBGROUPS build post CK conversion of pcbinfo 2018-06-13 23:19:54 +00:00
Pedro F. Giffuni
fe267a5590 sys: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:23:17 +00:00
George V. Neville-Neil
ce223fb715 Unbreak the RSS/PCBGROUp build. 2016-03-31 00:53:23 +00:00
Adrian Chadd
b2bdc62a95 Refactor / restructure the RSS code into generic, IPv4 and IPv6 specific
bits.

The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.

* net/rss_config.[ch] takes care of the generic bits for doing
  configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
  that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.

This should have no functional impact on anyone currently using
the RSS support.

Differential Revision:	D1383
Reviewed by:	gnn, jfv (intel driver bits)
2015-01-18 18:06:40 +00:00
Andrey V. Elsukov
1b44e5ffe3 Introduce INP6_PCBHASHKEY macro. Replace usage of hardcoded part of
IPv6 address as hash key in all places.

Obtained from:	Yandex LLC
2014-09-10 12:35:42 +00:00
Adrian Chadd
58ef629f00 Make the PCBGROUPS code aware of IPv4 UDP 4-tuple. 2014-07-20 07:38:38 +00:00
Adrian Chadd
0a100a6f1e Implement the first stage of multi-bind listen sockets and RSS socket
awareness.

* Introduce IP_BINDMULTI - indicating that it's okay to bind multiple
  sockets on the same bind details.

  Although the PCB code has been taught about this (see below) this patch
  doesn't introduce the rest of the PCB changes necessary to distribute
  lookups among multiple PCB entries in the global wildcard table.

* Introduce IP_RSS_LISTEN_BUCKET - placing an listen socket into the
  given RSS bucket (and thus a single PCBGROUP hash.)

* Modify the PCB add path to be aware of IP_BINDMULTI:
  + Only allow further PCB entries to be added if the owner credentials
    and IP_BINDMULTI has been specified.  Ie, only allow further
    IP_BINDMULTI sockets to appear if the first bind() was IP_BINDMULTI.

* Teach the PCBGROUP code about IP_RSS_LISTE_BUCKET marked PCB entries.
  Instead of using the wildcard logic and hashing, these sockets are
  simply placed into the PCBGROUP and _not_ in the wildcard hash.

* When doing a PCBGROUP lookup, also do a wildcard match as well.
  This allows for an RSS bucket PCB entry to appear in a PCBGROUP
  rather than having to exist in the wildcard list.

Tested:

* TCP IPv4 server testing with igb(4)
* TCP IPv4 server testing with ix(4)

TODO:

* The pcbgroup lookup code duplicated the wildcard and wildcard-PCB
  logic.  This could be refactored into a single function.

* This doesn't yet work for IPv6 (The PCBGROUP code in netinet6/ doesn't
  yet know about this); nor does it yet fully work for UDP.
2014-07-10 03:10:56 +00:00
Robert Watson
7527624efa Several years after initial development, merge prototype support for
linking NIC Receive Side Scaling (RSS) to the network stack's
connection-group implementation.  This prototype (and derived patches)
are in use at Juniper and several other FreeBSD-using companies, so
despite some reservations about its maturity, merge the patch to the
base tree so that it can be iteratively refined in collaboration rather
than maintained as a set of gradually diverging patch sets.

(1) Merge a software implementation of the Toeplitz hash specified in
    RSS implemented by David Malone.  This is used to allow suitable
    pcbgroup placement of connections before the first packet is
    received from the NIC.  Software hashing is generally avoided,
    however, due to high cost of the hash on general-purpose CPUs.

(2) In in_rss.c, maintain authoritative versions of RSS state intended
    to be pushed to each NIC, including keying material, hash
    algorithm/ configuration, and buckets.  Provide software-facing
    interfaces to hash 2- and 4-tuples for IPv4 and IPv6 using both
    the RSS standardised Toeplitz and a 'naive' variation with a hash
    efficient in software but with poor distribution properties.
    Implement rss_m2cpuid()to be used by netisr and other load
    balancing code to look up the CPU on which an mbuf should be
    processed.

(3) In the Ethernet link layer, allow netisr distribution using RSS as
    a source of policy as an alternative to source ordering; continue
    to default to direct dispatch (i.e., don't try and requeue packets
    for processing on the 'right' CPU if they arrive in a directly
    dispatchable context).

(4) Allow RSS to control tuning of connection groups in order to align
    groups with RSS buckets.  If a packet arrives on a protocol using
    connection groups, and contains a suitable hardware-generated
    hash, use that hash value to select the connection group for pcb
    lookup for both IPv4 and IPv6.  If no hardware-generated Toeplitz
    hash is available, we fall back on regular PCB lookup risking
    contention rather than pay the cost of Toeplitz in software --
    this is a less scalable but, at my last measurement, faster
    approach.  As core counts go up, we may want to revise this
    strategy despite CPU overhead.

Where device drivers suitably configure NICs, and connection groups /
RSS are enabled, this should avoid both lock and line contention during
connection lookup for TCP.  This commit does not modify any device
drivers to tune device RSS configuration to the global RSS
configuration; patches are in circulation to do this for at least
Chelsio T3 and Intel 1G/10G drivers.  Currently, the KPI for device
drivers is not particularly robust, nor aware of more advanced features
such as runtime reconfiguration/rebalancing.  This will hopefully prove
a useful starting point for refinement.

No MFC is scheduled as we will first want to nail down a more mature
and maintainable KPI/KBI for device drivers.

Sponsored by:   Juniper Networks (original work)
Sponsored by:   EMC/Isilon (patch update and merge)
2014-03-15 00:57:50 +00:00
Robert Watson
52cd27cb58 Implement a CPU-affine TCP and UDP connection lookup data structure,
struct inpcbgroup.  pcbgroups, or "connection groups", supplement the
existing inpcbinfo connection hash table, which when pcbgroups are
enabled, might now be thought of more usefully as a per-protocol
4-tuple reservation table.

Connections are assigned to connection groups base on a hash of their
4-tuple; wildcard sockets require special handling, and are members
of all connection groups.  During a connection lookup, a
per-connection group lock is employed rather than the global pcbinfo
lock.  By aligning connection groups with input path processing,
connection groups take on an effective CPU affinity, especially when
aligned with RSS work placement (see a forthcoming commit for
details).  This eliminates cache line migration associated with
global, protocol-layer data structures in steady state TCP and UDP
processing (with the exception of protocol-layer statistics; further
commit to follow).

Elements of this approach were inspired by Willman, Rixner, and Cox's
2006 USENIX paper, "An Evaluation of Network Stack Parallelization
Strategies in Modern Operating Systems".  However, there are also
significant differences: we maintain the inpcb lock, rather than using
the connection group lock for per-connection state.

Likewise, the focus of this implementation is alignment with NIC
packet distribution strategies such as RSS, rather than pure software
strategies.  Despite that focus, software distribution is supported
through the parallel netisr implementation, and works well in
configurations where the number of hardware threads is greater than
the number of NIC input queues, such as in the RMI XLR threaded MIPS
architecture.

Another important difference is the continued maintenance of existing
hash tables as "reservation tables" -- these are useful both to
distinguish the resource allocation aspect of protocol name management
and the more common-case lookup aspect.  In configurations where
connection tables are aligned with hardware hashes, it is desirable to
use the traditional lookup tables for loopback or encapsulated traffic
rather than take the expense of hardware hashes that are hard to
implement efficiently in software (such as RSS Toeplitz).

Connection group support is enabled by compiling "options PCBGROUP"
into your kernel configuration; for the time being, this is an
experimental feature, and hence is not enabled by default.

Subject to the limited MFCability of change dependencies in inpcb,
and its change to the inpcbinfo init function signature, this change
in principle could be merged to FreeBSD 8.x.

Reviewed by:    bz
Sponsored by:   Juniper Networks, Inc.
2011-06-06 12:55:02 +00:00