Commit Graph

9 Commits

Author SHA1 Message Date
Marius Strobl
6882cb0c9f Correct spelling in comments.
Submitted by:	brucec
2011-04-22 09:22:27 +00:00
Pyun YongHyeon
fcb62a8b01 Add hack to pass controller specific information to phy driver.
Unlike most other PHYs there is no easy way to know which media
type the PHY supports on Marvell PHYs. MIIF_HAVEFIBER flags is now
passed via bus-specific instance variable of a device. While I'm
here add 88E1112 specific work around to set SIGDET polarity low.
Many thanks "Eugene Perevyazko <john <> dnepro dot net>" who kindly
gave remote access to system with DGE-560SX.
2009-09-28 21:03:28 +00:00
Pyun YongHyeon
b95c79e0a1 Program LED registers for 88E1116/88E1149 PHYs. These PHYs are
found on Marvell Yukon Ultra, Marvell Yukon Extreme controllers.
While I'm here explicitly issue 'powerup' command for 88E1149 PHY.

Tested by:	jhb, Warren Block ( wblock <> wonkity dot com )
2009-06-02 00:30:30 +00:00
Pyun YongHyeon
745ef56af2 Add driver support for 88E3016 PHY which is found on Marvell Yukon
FE+ controller. Due to the severe silicon bugs for Yukon FE+,
88E3016 seems to require more workarounds. However I'm not sure
whether the workaround is PHY specific or only applicable to Yukon
FE+. The datasheet for the PHY is publicly available but it lacks
several details for the workaround used in this change. The
workaround information was obtained from Linux. Many thanks to
Yukon FE+ users who helped me add 88E3016 support.

Tested by:	bz, Tanguy Bouzeloc ( the.zauron <> gmail dot com )
		Bruce Cran ( bruce <> cran dot org dot uk )
		Michael Reifenberger ( mike <> reifenberger dot com )
		Stephen Montgomery-Smith ( stephen <> missouri dot edu )
2009-05-25 02:36:29 +00:00
Pyun YongHyeon
6fd47025e1 Add 88E1116/88E1116R PHY support code that takes the PHY out of
power-down mode.

PR:	kern/114086
MFC after:	3 days
2007-10-29 05:50:22 +00:00
Pyun YongHyeon
eafc9368bc Add additional Marvell PHY registers. 2006-12-11 10:43:32 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Wilko Bulte
59ce78fef1 Add support for SK-9521 V2.0 and 3COM 3C940.
Tested at 100Mbit only, using Asus P4P800 onboard 3C940.
The -stable version of this patch I have in use for ~2 weeks now, and works
just fine for me.

Based on: Nathan L. Binkert's patch for OpenBSD
Patch submitted by and thanks to: Jung-uk Kim <jkim@niksun.com>
MFC after: 2 weeks
2003-09-20 10:53:08 +00:00
Matt Jacob
2a4339f78f Add Marvell PHY support for 10/100/1000 LIVENGOOD_CU Intel NIC.
Parag Patel did all of the grunt work, so he gets the credit.
Register definitions and actions inferred from a Linux driver,
so Intel also gets some 'credit'.
2001-04-09 21:29:44 +00:00