Commit Graph

63 Commits

Author SHA1 Message Date
Warner Losh
fbbd9655e5 Renumber copyright clause 4
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by:	Jan Schaumann <jschauma@stevens.edu>
Pull Request:	https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
Bartek Rutkowski
94161f30b7 Fix regression when stdin/out/err fds are are overridden by shell.
Submitted by:	Pawel Biernacki <pawel.biernacki@gmail.com>
Reported by:	ngie
Approved by:	ngie
Sponsored by:	Mysterious Code Ltd.
Differential Revision:	https://reviews.freebsd.org/D8543
2016-12-12 18:56:40 +00:00
Bartek Rutkowski
2a65657fc8 Capsicum support for dd(1)
Adds Capsicum sandboxing to dd utility.

Submitted by:	Pawel Biernacki <pawel.biernacki@gmail.com>
Reviewed by:	allanjude, emaste, oshogbo
Approved by:	oshogbo
Sponsored by:	Mysterious Code Ltd.
Differential Revision:	https://reviews.freebsd.org/D8543
2016-12-09 14:51:05 +00:00
Adrian Chadd
29aee14890 [dd] Revert the capsicum bits for now until it gets fixed.
dd is a bootstrap tool and that header isn't installed as part of the
bootstrap environment for previous releases (eg freebsd-10.)

We'll figure it out in post and then re-commit it.
2016-11-19 18:19:21 +00:00
Ruslan Bukin
6193edf4c5 Restore dd changes included accidentally in r308857. 2016-11-19 17:51:02 +00:00
Ruslan Bukin
9a8f61fb5b Bring in support for Ingenic XBurst JZ4780 and
X1000 systems on chips.

Imgtec CI20 and Ingenic CANNA boards supported.

Submitted by:	Alexander Kabaev <kan@FreeBSD.org>
Reviewed by:	Ruslan Bukin <br@FreeBSD.org>
Sponsored by:	DARPA, AFRL
2016-11-19 17:46:18 +00:00
Bartek Rutkowski
947b83c090 Capsicum support for dd(1)
Adds Capsicum sandboxing to dd utility.

Submitted by:	Pawel Biernacki <pawel.biernacki@gmail.com>
Reviewed by:	allanjude, emaste, oshogbo
Approved by:	oshogbo
Sponsored by:	Mysterious Code Ltd.
Differential Revision:	https://reviews.freebsd.org/D8543
2016-11-18 21:09:57 +00:00
Edward Tomasz Napierala
75e5511214 Add speed limit to dd(1). This is useful for testing RCTL disk io limits
(when they actually get committed, that is), and might also come in handy
in other situations.

Reviewed by:	wblock@ (man page)
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-02-28 10:27:12 +00:00
Thomas Quinot
cd1832fe92 Reorganize the handling all-zeroes terminal block in sparse mode
The intent of the previous code in that case was to force
an explicit write, but the implementation was incorrect, and
as a result the write was never performed. This new implementation
instead uses ftruncate(2) to extend the file with a trailing hole.

Also introduce regression tests for these cases.

PR: 189284
(original PR whose fix introduced this bug)

PR: 207092

Differential Revision:	D5248
Reviewed by:	sobomax,kib
MFC after:	2 weeks
2016-02-18 08:44:16 +00:00
Kurt Jaeger
f4cfd28bb5 bin/dd: revert 273734, as it fails on 32bit platforms
Revert: insufficient testing on 32bit platforms

PR:		191263
2014-10-27 17:39:37 +00:00
Kurt Jaeger
179eb7112b bin/dd: Fix incorrect casting of arguments
dd(1) casts many of its numeric arguments from uintmax_t to intmax_t
and back again to detect whether or not the original arguments were
negative. This caused wrong behaviour in some boundary cases:

$ dd if=/dev/zero of=/dev/null count=18446744073709551615
dd: count cannot be negative

After the fix:

$ dd if=/dev/zero of=/dev/null count=18446744073709551615
dd: count: Result too large

PR:		191263
Submitted by:	will@worrbase.com
Approved by:	cognet@
2014-10-27 11:38:17 +00:00
Alan Somers
540c78258c Incorporate feedback from bde and jilles regarding r265472 to dd(1).
* Don't use sysexits.h.  Just exit 1 on error and 0 otherwise.
* Don't sacrifice precision by converting the output of clock_gettime() to a
  double and then comparing the results.  Instead, subtract the values of
  the two clock_gettime() calls, then convert to double.
* Don't use CLOCK_MONOTONIC_PRECISE.  It's an unportable synonym for
  CLOCK_MONOTONIC.
* Use more appropriate names for some local variables.
* In the summary message, round elapsed time to the nearest microsecond.

Reported by:	bde, jilles
MFC after:	3 days
X-MFC-With:	265472
2014-05-08 19:10:04 +00:00
Thomas Quinot
aa7a161b40 (dd_out): Fix handling of all-zeroes block at end of input with
conv=sparse.

This change fixes two separate issues observed when the last output
block is all zeroes, and conv=sparse is in use. In this case, care
must be taken to roll back the last seek and write the entire last zero
block at the original offset where it should have occurred: when the
destination file is a block device, it is not possible to roll back
by just one character as the write would then not be properly aligned.

Furthermore, the buffer used to write this last all-zeroes block
needs to be properly zeroed-out. This was not the case previously,
resulting in a junk data byte appearing instead of a zero in the
output stream.

PR:		bin/189174
PR:		bin/189284
Reviewed by:	kib
MFC after:	2 weeks
2014-05-07 19:33:29 +00:00
Alan Somers
d1d66eac15 dd(1) uses gettimeofday(2) to compute the throughput statistics. However,
gettimeofday returns the system clock, which may jump forward or back,
especially if NTP is in use.  If the time jumps backwards, then dd will see
negative elapsed time, round it up to 1usec, and print an absurdly fast
transfer rate.

The solution is to use clock_gettime(2) with CLOCK_MONOTONIC_PRECISE as the
clock_id.  That clock advances steadily, regardless of changes to the system
clock.

Reviewed by:	delphij
MFC after:	3 days
Sponsored by:	Spectra Logic
2014-05-06 22:06:39 +00:00
Xin LI
413ef2a3d1 Make C_* contants fit in 32 bits again by using 4 unused bits.
Noticed by:	bde
2014-04-03 06:32:02 +00:00
Xin LI
c3f5e9c515 Implement GNU's extension of 'status' operand. The GNU syntax is
borrowed where syntax status=noxfer means no transfer statistics
and status=none means no status information at all.

This feature is useful because the statistics information can
sometimes be annoying, and redirecting stderr to /dev/null would
mean error messages also gets silenced.

Obtained from:	OpenBSD
MFC after:	2 weeks
2014-04-03 00:55:16 +00:00
Eitan Adler
4ac1163902 Make dd's signal handler async safe.
PR:		bin/75258
Submitted by:	"Oleg V. Nauman" <oleg@reis.zp.ua>
Arrival Date:	Sun Dec 19 14:50:21 GMT 2004
Reviewed by:	mjg, jhb
Reviewed by:	jilles (earlier version)
MFC after:	1 week
2013-05-10 18:43:36 +00:00
Konstantin Belousov
6784d416a5 Literally follow POSIX:
If the bs= expr operand is specified and no conversions other than sync,
noerror, or notrunc are requested, the data returned from each input
block shall be written as a separate output block.

In particular, when both bs=size and conv=sparce were specified, the
resulted file was fully filled, instead of sparce.

PR:	standards/177742
Submitted by:	Matthew Rezny <mrezny@hexaneinc.com>
MFC after:	2 weeks
2013-04-23 16:08:24 +00:00
Brooks Davis
c183a03b17 IFP4 change 222074.
Introduce an explicit close of the output descriptor so that work done
on close is accounted for in the summary output triggered at exit
(implicit close()s occur after atexit() hooks).

This is useful because some devices such as cfi(4) may perform
signficant work after a close occurs (e.g. erasing and rewriting a
block of flash).
2013-04-03 19:19:45 +00:00
Ed Schouten
902d9eafbf Rework all non-contributed files that use `struct timezone'.
This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:

	int gettimeofday(struct timeval *restrict tp, void *restrict tzp);

Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.

While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
2012-09-01 14:45:15 +00:00
Robert Watson
e3edab4a91 Add a "fillchar" command line argument to dd(1) that permits the user
to specify an alternative padding character when using a conversion
mode, or when using noerror with sync and an input error occurs.  This
facilities reading old and error-prone media by allowing the user to
more effectively mark error blocks in the output stream.
2004-08-15 19:10:05 +00:00
Mark Murray
6195fb4102 Remove clause 3 from the UCB licenses.
OK'ed by:	imp, core
2004-04-06 20:06:54 +00:00
Poul-Henning Kamp
6a3d33ac5e Teach dd(1) about parity bits. 2004-03-05 19:35:51 +00:00
David E. O'Brien
09a80d4867 Quiet warnings about copyright[]. 2003-05-01 16:58:57 +00:00
Mark Murray
7503d74f54 WARNS=4 fixes. This would be WARNS=9 if we were -std=99 instead of
-ansi, due to 'long long'.

Reviewed by:	green (slightly earlier version)
2003-02-27 18:04:54 +00:00
Poul-Henning Kamp
cd967e322a Don't call DIOCWLABEL on disks, it is not implemented, and calling it
like this negated any practical value of the feature.
2003-01-26 11:13:40 +00:00
David E. O'Brien
5eb43ac2f7 Consistently use __FBSDID 2002-06-30 05:13:54 +00:00
Mark Murray
afa5289a98 1) Rev.1.35 of dd.c has a more serious regression. It backs out rev.1.31,
thus breaking systems with unpolluted <sys/stat.h>'s.

2) Back out an initialisation of a variable in BSS.

Reported by:	bde (1), many(2)
2002-03-07 14:00:33 +00:00
Mark Murray
9afa09cd0e Fix warnings inspired by lint, a commercial lint and WARNS=4. 2002-02-22 20:51:00 +00:00
Warner Losh
f9bcb0beb5 o __P has been reoved
o Old-style K&R declarations have been converted to new C89 style
o register has been removed
o prototype for main() has been removed (gcc3 makes it an error)
o int main(int argc, char *argv[]) is the preferred main definition.
o Attempt to not break style(9) conformance for declarations more than
  they already are.

Approved by: arch@, new style(9)
2002-02-02 06:24:13 +00:00
Brian Feldman
4ed955372c Commit general cleanups (separate get_num() and get_off_t() functions to
debogosify some of the command-line string-number conversions into
an unsigned and signed variant.)
2002-01-25 17:44:47 +00:00
Brian Feldman
9f3537caad Use __unused for non-used variables.
Submitted by:	Mike Barcroft <mike@q9media.com>
2001-06-29 20:06:47 +00:00
Garrett Wollman
eb2fc78027 Don't depend on <sys/stat.h> bogusly including <sys/time.h> (and thereby
<time.h>).
2000-10-10 01:50:26 +00:00
Brian Feldman
5976ee7e31 Make the comment regarding ftruncate() correct. 2000-07-20 19:21:40 +00:00
Brian Feldman
c15c898eff Various cleanups are made to reduce warnings and make code prettier :)
Also, check for ftruncate() return value and die on failure, but only
try to ftruncate() when the file is a regular file.
2000-07-01 05:36:25 +00:00
David E. O'Brien
015a53cfff Fix ``dd if=/dev/zero of=/dev/daN'' on the Alpha by allowing the label
to be overwritten.

Submitted by:	green
2000-05-24 06:47:10 +00:00
Brian Feldman
bf3367d091 Nuke the FIODTYPE compatibility bits. It's time. 1999-10-03 18:49:51 +00:00
Brian Feldman
5ff6541e7a Make count=0 set cpy_cnt to -1, which is slight overloading, but makes
what I was trying to do work much better (ie at all.  I could have sworn
it was working...) Fix a SEEK_SET to be SEEK_CUR, and make Bruce's
lseek() test work correctly.
1999-09-16 19:50:59 +00:00
Brian Feldman
7599187e0d Even more dd(1) cleanups! Thanks to Bruce for staying on my case until
we're done (not yet!) :)
1999-09-13 21:47:10 +00:00
Brian Feldman
32952d4b37 ISDISK -> ISSEEK
Allow a device type of D_DISK or D_MEM to be ISSEEK.
1999-09-12 18:56:12 +00:00
Brian Feldman
5868747254 Even more cleanups to dd(1). This is probably the culmination of the
BDEification process of dd(1). Most of the changes are from BDE's archive.
Support for negative offsets is gone again, but the case where you
lseek() onto byte -1 of something from a negative offset using seek/skip
is fixed; if you end up on -1, you won't get a false positive lseek failure.
  The biggest changes are to data types (more size_t, for instance) and
argument parsing. skip/seek on /dev/{,k}mem now occurs (instead of "read
until you reach the offset") due to mem devices now being D_DISK. Some
const things are now correctly declared as such, and the "case table"
building is better. The only thing that seems to be left to make dd(1)
everything TOG wants it to be is l10n.
1999-09-12 16:51:53 +00:00
Brian Feldman
ff8bb989ab Relax things a bit. Not having FIODTYPE will be a warning for now.
Pointy hat:	green
Pointed out by:	peter
1999-08-28 03:37:38 +00:00
Peter Wemm
2a4562393f $Id$ -> $FreeBSD$ 1999-08-27 23:15:48 +00:00
Brian Feldman
e08d7384ee Use FIODTYPE to unbogosify much of the file type checking in dd. 1999-08-27 16:36:46 +00:00
Brian Feldman
769e5815e3 Implement seekability for disk devices (not just regular files).
Also, fix pos_out() to do the same checks pos_in() did.

Done for:	jdp, luigi, the good of the world
1999-07-13 18:44:56 +00:00
Brian Feldman
54946e00b2 This is the second round of dd(1) changes. Some changes made/reversed by
request of Bruce. More changes may follow later. 'g' multiplier has
been added (i.e. dd seek=5g if=bigfile.) Some minor corrections were made
as well.

Noticed by: bde
1999-06-20 14:58:55 +00:00
Brian Feldman
767bc8ad79 Miscellaneous dd(1) changes: mainly fixing variable types (size_t, ssize_t,
off_t, int, u_int64_t, etc.). dd(1) should now work properly with REALLY
big amounts of data.
1999-06-19 19:49:35 +00:00
Warner Losh
426e9c1dcc First set of fixes to keep egcs happy. These include {} around single
statement if blocks[*] when the else could be ambiguous, not defaulting
to int type and removal of some unused variables.

[*] This is explicitly allowed by style(9) when the single statement
spans more than one line.

Reviewed by: obrien, chuckr
1999-04-25 21:13:34 +00:00
Philippe Charnier
1ba0e048a2 Restore Lite-2 sccsid. Restore include of sys/types.h. 1998-05-13 07:33:54 +00:00
Philippe Charnier
cbf6f7d358 Correct use of .Nm and other cosmetics. Add rcsid. Remove unused #inc. 1998-05-06 06:51:42 +00:00