Original commit "7090 zfs should improve allocation order" declares alloc
queue sorted by time and offset. But in practice io_offset is always zero,
so sorting happened only by time, while order of writes with equal time was
completely random. On Illumos this did not affected much thanks to using
high resolution timestamps. On FreeBSD due to using much faster but low
resolution timestamps it caused bad data placement on disks, affecting
further read performance.
This change switches zio_timestamp_compare() from comparing uninitialized
io_offset to really populated io_bookmark values. I haven't decided yet
what to do with timestampts, but on simple tests this change gives the
same peformance results by just making code to work as declared.
MFC after: 1 week
In particular, the fault access type is accounted for when the
aperture page is moved to GTT domain. On the other hand, the current
pager structure is left intact, most important, only one page is
instantiated per populate call.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
It allows to provide configurable agressive prefaulting and useful
hints to page daemon about memory allocations, on faults for pages
managed by phys pager. In fact, this implementation is superior to
the MAP_SHARED_PHYS hack from my Postgresql paper, while giving
similar benefits of reducing the page faults numbers on SysV shared
memory mappings.
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
with cdev_pg_populate() to provide device drivers access to it. It
gives drivers fine control of the pages ownership and allows drivers
to implement arbitrary prefault policies.
The populate method is called on a page fault and is supposed to
populate the vm object with the page at the fault location and some
amount of pages around it, at pager's discretion. VM provides the
pager with the hints about current range of the object mapping, to
avoid instantiation of immediately unused pages, if pager decides so.
Also, VM passes the fault type and map entry protection to the pager,
allowing it to force the optimal required ownership of the mapped
pages.
Installed pages must contiguously fill the returned region, be fully
valid and exclusively busied. Of course, the pages must be compatible
with the object' type.
After populate() successfully returned, VM fault handler installs as
many instantiated pages into the process page tables as it sees
reasonable, while still obeying the correct semantic for COW and vm
map locking.
The method is opt-in, pager sets OBJ_POPULATE flag to indicate that
the method can be called. If pager' vm objects can be shadowed, pager
must implement the traditional getpages() method in addition to the
populate(). Populate() might fall back to the getpages() on per-call
basis as well, by returning VM_PAGER_BAD error code.
For now for device pagers, the populate() method is only allowed to be
used by the managed device pagers, but the limitation is only made
because there is no unmanaged fault handlers which could use it right
now.
KPI designed together with, and reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
contain a vm_page_t at the specified index. However, with this
change, vm_radix_remove() no longer panics. Instead, it returns NULL
if there is no vm_page_t at the specified index. Otherwise, it
returns the vm_page_t. The motivation for this change is that it
simplifies the use of radix tries in the amd64, arm64, and i386 pmap
implementations. Instead of performing a lookup before every remove,
the pmap can simply perform the remove.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D8708
values. This more closely matches other wifi drivers in the tree.
The bitmap levels have been based closely on other drivers (primarily
[u]rtwn(4)) in the hope that one day these can be unified into a shared
wifi-debug framework.
This is the first step of several pieces of work I'm planning on doing
with the run(4) driver. I may well adjust and refine some of the debug
bitmaps at a later date.
Reviewed by: adrian, avos
Differential Revision: https://reviews.freebsd.org/D8704
This made a couple of bugs visible in handling SSN wrap-arounds
when using DATA chunks. Now bulk transfer seems to work fine...
This fixes the issue reported in
https://github.com/sctplab/usrsctp/issues/111
MFC after: 1 week
Include the SHN_UNDEF (zero) index special section in extended-attribute
ELF files, like GNU binutils' readelf.
Additionally, print "<no-name>" for sections without names, like GNU
binutils.
Reviewed by: kaiw@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8707
kinfo_proc::ki_tdname is three characters shorter than
thread::td_name. Add a ki_moretdname field for these three
extra characters. Add the new field to kinfo_proc32, as well.
Update all in-tree consumers to read the new field and assemble
the full name, except for lldb's HostThreadFreeBSD.cpp, which
I will handle separately. Bump __FreeBSD_version.
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D8722
Table to find the CPUs to find the CPUs to start. Currently we assume PSCI,
however this assumption is shared with the FDT code.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Table to find if the hardware supports PSCI, and if so what method the
kernel should use to interact with it.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This makes booting on Hyper-V w/ small # of vCPUs work properly.
Reported by: Hongxiong Xian <v-hoxian microsoft com>, Hongjiang Zhang <honzhan microsoft com>
MFC after: 1 week
Sponsored by: Microsoft
On FreeBSD the sense of rw_write_held() and rw_iswriter() were reversed,
probably due to a cut and paste error. Using rw_iswriter() would cause
the kernel to panic.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8718
I'm teaching my ath10k port to communicate up the per-rate / channel width
information I get from the firmware.
The HT40 flag field should just be retired and instead moved to use the
PHY bandwidth field.
For IPv4 similar function uses addresses and ports in host byte order,
but for IPv6 it used network byte order. This led to very bad hash
distribution for IPv6 flows. Now the result looks similar to IPv4.
Reported by: olivier
MFC after: 1 week
Sponsored by: Yandex LLC
Some utilities (notably top(1)) exit if any of their input sysctls don't
exist, and the removal of the above-mentioned PG_CACHE-related sysctls
makes it difficult to run such utilities on different versions of the
kernel without recompiling.
Requested by: bde
stack_machdep.c is compiled if either of the DDB or STACK options is
specified, but stack_save_td_running() isn't useable from DDB. Moreover,
stack_save_td_running() works by raising an NMI on the CPU running the
target thread, and the corresponding handler is compiled only if STACK is
configured.
Reported by: kib
MFC after: 1 week
PowerPC, add lib/Support/Atomic.cpp. This is needed because upstream
llvm revision r271821 disabled the use of std::call_once, which causes
some fallback functions from Atomic.cpp to be used instead.
Reported by: Mark Millard
PR: 214902
X-MFC-With: 309124
These functions are supposed to return a value between [_2^31, 2^31).
This doesn't seem to work on 64-bit systems, where we return a value
between [0, 3^32). Patch up the function to use proper casts to int32_t.
While there, fix some other style bugs.
MFC after: 2 weeks
lead to access from the virtual machine to the heap of the bhyve(8) process.
Submitted by: Felix Wilhelm <fwilhelm ernw.de>
Patch by: grehan
Security: FreeBSD-SA-16:38.bhyve
A specially crafted sockaddr_dl argument can trigger a static buffer overflow
in the libc library, with possibility to rewrite with arbitrary data following
static buffers that belong to other library functions.
Reviewed by: kib
Security: FreeBSD-SA-16:37.libc
of memory allocation failures combined with insufficient error checking
could result in the construction and execution of an argument sequence that
was not intended.
Fix that treating malloc(3) failures as fatal condition.
Submitted by: brooks
Security: FreeBSD-SA-16:36.telnetd
used. We can do it programmatically, but that would make code convoluted
and more complex. I have two more of those types coming for the CLOCK_REALTIME
and CLOCK_MONOTONIC. This seems like an elegant and scallable approach.
Leave robust-protected region before checking for cancellation by
calling _thr_testcancel(). Otherwise, if cancelling request was
pending, the cancel handler is called with the dandling inact_mtx,
which triggers an assert if any mutex operation is performed by the
handler.
Reported and tested by: Dimitri Staessens <dimitri.staessens@intec.ugent.be>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The mbtoc(3) and wctomb(3) functions use internal state which may be
tainted before the call to strvis(3). In this context we can just use
the thread-safe versions mbrtoc(3) and wcrtomb(3) which allow passing
our own state from our stack.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
