Highlights:
- Exit early if we're not disabling unused regulators; there's no need to
take the regulator topology lock and re-evaluate this every iteration, as
it's not going to change.
- Don't emit a notice that we're shutting down a regulator if it's not
enabled, to reduce noise.
- Mention the outcome of the shutdown, to aide debugging and easily let
developer/user collect list of regulators we actually shutdown to
determine problematic one.
Reviewed by: manu
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D22213
This creates a dedicated routine (vn_alloc) to allocate vnodes.
As a side effect code duplicationw with getnewvnode_reserve is eleminated.
Add vn_free for symmetry.
Having a reserved vnode count does not guarantee that getnewvnodes wont
block later. Said blocking partially defeats the purpose of reserving in
the first place.
Preallocate instaed. The only consumer was always passing "1" as count
and never nesting reservations.
r302340, as an attempt to fix the localbus child handling post-rman change,
actually broke child resource allocation, due to typos in
fdt_lbc_reg_decode(). This went unnoticed because there aren't any drivers
currently in tree that use localbus.
This overlays can be used on A64 board to use spigen and spi(8)
on the spi0 pins.
Tested On: Pine64-LTS, A64-Olinuxino
Submitted by: Gary Otten <gdotten@gmail.com>
or rename an entry in it, properly reset the link count of the inode
associated with the entry that was to have been changed.
Tested by: Peter Holm
MFC after: 7 days
The patch could be simplier, using only the second chunk to
vtnet_rxq_eof(), that passes full mbufs to pfil(9). Packet
filter would m_free() them in case of returning PFIL_DROPPED.
However, we pretend to be a hardware driver, so we first try
to pass a memory buffer via PFIL_MEMPTR feature. This is mostly
done for debugging purposes, so that one can experiment in bhyve
with packet filters utilizing same features as a true driver.
respectively. The tunable controls how big is the size of per-cpu
vm page cache. Previously the value was split for all CPUs in system,
so configuring same value on machines with different count of CPUs
yielded in different cache size available to a particular CPU.
Reviewed by: markj
Obtained from: Netflix
We use to handle each message separately in i2c_transfer but that cannot
work with message with NOSTOP as it confuses the controller that we disable
the interrupts and start a new message.
Handle every message in the interrupt handler and fire a new start condition
if the previous message have NOSTOP, the controller understand this as a
repeated start.
This fixes booting on Allwinner A10/A20 platform where before the i2c controller
used to write 0 to the PMIC register that control the regulators as it though that
this was the continuation of the write message.
Tested on: A20 BananaPi, Cubieboard 1 (kevans)
Reported by: kevans
MFC after: 1 month
When either makesyscalls.lua or syscalls.master changes, all of the
${GENERATED} targets are now out-of-date. With make jobs > 1, this means we
will run the makesyscalls script in parallel for the same ABI, generating
the same set of output files.
Prior to r356603 , there is a large window for interlacing output for some
of the generated files that we were generating in-place rather than staging
in a temp dir. After that, we still should't need to run the script more
than once per-ABI as the first invocation should update all of them. Add
.ORDER to do so cleanly.
Reviewed by: brooks
Discussed with: sjg
Differential Revision: https://reviews.freebsd.org/D23099
This makes makesyscalls.lua more parallel-friendly, or at least not as
hostile to the idea. We get into situations where we're running parallel if
we end up with MAKE_JOBS>1 entering any of the sysent targets, since each
output file is recognized a distinct build step that needs to be executed.
Another commit will add some .ORDER to further improve the situation.
Reported by: jhb
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D23098
This regulator is marked regulator-boot-on, but it will get shutdown if it's
not actually used/enabled by a driver. This should fix sata on the
cubieboard{1,2}.
Reported by: Ray White @ UWaterloo
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D23112
This avoids getting the XHCI_TRB_ERROR_CONTEXT_STATE error code from the XHCI
controller when the endpoint is disabled or already stopped.
Suggested by: Shichun.Ma@dell.com
MFC after: 1 week
Sponsored by: Mellanox Technologies
hw.floatingpoint and hw.altivec are effectively runtime constants (bits from
the cpu_feature bitfield), so don't need Giant, or any locking for that
matter.
It may be possible to make this completely lock free, but for now it's using
a statically allocated bounce buffer in the softc, so it needs to be
guarded.
The newer versions of RPi FDT flipped the order of the interrupts
specification and added an 'interrupt-names' property for driver aide in
finding the correct interrupt, rather than assuming the positions. Use it if
it's available, or fallback to the old method if there is no interrupt-names
property with a usb value.
This has been tested with both old RPi3B FDT and new RPi3B FDT, USB again
works on the latter.
Reported by: Tom Yan <tom.ty89 gmail com>
MFC after: 3 days
Some kernel subsystems, notably ZFS, will destroy UMA zones from a
shutdown eventhandler. This causes the zone to be drained. For slabs
that are mapped into KVA this can be very expensive and so it needlessly
delays the shutdown process.
Add a new state to the "booted" variable, BOOT_SHUTDOWN. Once
kern_reboot() starts invoking shutdown handlers, turn uma_zdestroy()
into a no-op, provided that the zone does not have a custom finalization
routine.
PR: 242427
Reviewed by: jeff, kib, rlibby
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23066
Negative lengths are always invalid. The key length should also
be zero for hash algorithms that do not accept a key.
admbugs: 949
Reported by: Yuval Kanarenstein <yuvalk@ssd-disclosure.com>
Reviewed by: cem
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23094
Having metadata such as fibnum or vnet in the struct rib_head
is handy as it eases building functionality in the routing space.
This change is required to properly bring back route redirect support.
Reviewed by: bz
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D23047
Otherwise the malloc type accounting in malloc_domainset(9) is wrong
after r355203.
Reviewed by: rlibby
Reported by: kaktus
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23095
Add an option flag so that arbitrary updates to a lagg's configuration
do not clear sc_stride. Preseve compatibility for old ifconfig
binaries. Update ifconfig to use the new flag and improve the casting
used when parsing the option parameter.
Modify the RR transmit function to avoid locklessly reading sc_stride
twice. Ensure that sc_stride is always 1 or greater.
Reviewed by: hselasky
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23092
These will reportedly be used in future uma changes.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D23019
Do not configure any endpoint twice, but instead keep track of which
endpoints are configured on a per device basis, and use an evaluate
endpoint context command instead. When changing the configuration make
sure all endpoints get deconfigured and the configured endpoint mask
is reset.
This fixes an issue where an endpoint might stop working if there is
an error and the endpoint needs to be reconfigured as a part of the
error recovery mechanism in the FreeBSD USB stack.
Tested by: Shichun.Ma@dell.com
MFC after: 1 week
Sponsored by: Mellanox Technologies
Other mechanisms that resize the shmfd grab a write lock from 0 to OFF_MAX
for safety, so we still get proper synchronization of shmfd->shm_size in
effect. There's no need to block readers/writers of earlier segments when
we're just reserving more space, so narrow the scope -- it would likely be
safe to narrow it completely to just the section of the range that extends
beyond our current size, but this likely isn't worth it since the size isn't
stable until the writelock is granted the first time.
Suggested by: cem (passing comment)
if_vmove can fail if it lost a race and the vnet's already been moved. The
callers (and their callers) can generally cope with this, but right now
success is assumed. Plumb out the ENOENT from if_detach_internal if it
happens so that the error's properly reported to userland.
Reviewed by: bz, kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22780
Unify the keg layout selection paths (keg_small_init, keg_large_init,
keg_cachespread_init), and slightly improve memory efficiecy by:
- using the padding of the final item to store the slab header,
- not going OFFPAGE if we have a choice unless it improves efficiency.
Reviewed by: jeff, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23048
