Commit Graph

41 Commits

Author SHA1 Message Date
Pedro F. Giffuni
df57947f08 spdx: initial adoption of licensing ID tags.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Initially, only tag files that use BSD 4-Clause "Original" license.

RelNotes:	yes
Differential Revision:	https://reviews.freebsd.org/D13133
2017-11-18 14:26:50 +00:00
Kevin Lo
a24d62b533 Add preliminary support for the RTL8153.
Reviewed by:	hselasky
2016-10-31 05:58:11 +00:00
Pyun YongHyeon
7aa69e3107 Disable EEE(Energy Efficient Ethernet) for RTL8211F PHY.
It seems the EEE made RX MAC enter LPI(Low Power Idle) mode such
that dwc(4) was not able to receive packets.  Ideally dwc(4) should
be able to use EEE to save power during periods of low link
utilization(i.e. gating off clock).  Due to lack of dwc(4)
datasheet it's not easy to take required steps for EEE on LPI
enter/exit events.  Disabling EEE in PHY seems to be easy
workaround until dwc(4) supports EEE.

Updating EEE advertisement register on RTL8211F seems to have no
effect until reprogramming MII_ANAR, MII_100T2CR and MII_BMCR
with auto-negotiation. It's not clear whether it's related with
mii_phy_reset()'s BMCR_ISO handling for RTL8211F though.
It seems rgephy_reset() needs careful investigation for newer
RealTek PHYs.

Ganbold submitted working version based on NetBSD change and
tested lots of changes I made. Thanks a lot!

Submitted by:	ganbold (initial version)
In collaboration with:	ganbold
2015-12-03 05:27:39 +00:00
Pyun YongHyeon
ce18f7cde8 Restore auto MDIX for RTL8211B and newer revision PHYs which was
broken in r279903.

Reported by:	john <> feith . com
2015-03-13 01:16:14 +00:00
Pyun YongHyeon
72200a8ab5 Add RTL8211F gigabit PHY support.
PR:	197265
MFC after:	2 weeks
2015-03-12 07:05:28 +00:00
Gleb Smirnoff
9ff0137ec1 Remove unused variables.
CID:	1262431
CID:	1262430
2015-01-13 06:56:04 +00:00
Gleb Smirnoff
7e310d2d50 In miibus(4) drivers provide functions that allow to get NIC
driver name and NIC driver softc via the device(9) tree,
instead of going dirty through the ifnet(9) layer.

Differential Revision:	D1506
Reviewed by:		imp, jhb
2015-01-12 22:27:38 +00:00
Gleb Smirnoff
b2d3d26fa0 Move rl(4) to dev/rl. 2014-09-19 10:32:20 +00:00
Marcel Moolenaar
62d76917b8 Introduce a procedural interface to the ifnet structure. The new
interface allows the ifnet structure to be defined as an opaque
type in NIC drivers.  This then allows the ifnet structure to be
changed without a need to change or recompile NIC drivers.

Put differently, NIC drivers can be written and compiled once and
be used with different network stack implementations, provided of
course that those network stack implementations have an API and
ABI compatible interface.

This commit introduces the 'if_t' type to replace 'struct ifnet *'
as the type of a network interface. The 'if_t' type is defined as
'void *' to enable the compiler to perform type conversion to
'struct ifnet *' and vice versa where needed and without warnings.
The functions that implement the API are the only functions that
need to have an explicit cast.

The MII code has been converted to use the driver API to avoid
unnecessary code churn. Code churn comes from having to work with
both converted and unconverted drivers in correlation with having
callback functions that take an interface. By converting the MII
code first, the callback functions can be defined so that the
compiler will perform the typecasts automatically.

As soon as all drivers have been converted, the if_t type can be
redefined as needed and the API functions can be fix to not need
an explicit cast.

The immediate benefactors of this change are:
1.  Juniper Networks - The network stack implementation in Junos
    is entirely different from FreeBSD's one and this change
    allows Juniper to build "stock" NIC drivers that can be used
    in combination with both the FreeBSD and Junos stacks.
2.  FreeBSD - This change opens the door towards changing ifnet
    and implementing new features and optimizations in the network
    stack without it requiring a change in the many NIC drivers
    FreeBSD has.

Submitted by:	Anuranjan Shukla <anshukla@juniper.net>
Reviewed by:	glebius@
Obtained from:	Juniper Networks, Inc.
2014-06-02 17:54:39 +00:00
Pyun YongHyeon
cd10b400a6 Add support for new Gigabit PHY of RealTek.
I don't have a copy of data sheet so I'm not sure exact PHY model
name. Vendor's web page indicates RTL8251 is latest PHY so I used
the name. This PHY is used with RTL8168G, RTL8168GU and RTL8411B.
2013-10-29 05:14:38 +00:00
Gleb Smirnoff
61a3ac6e27 The MII layer shouldn't care about administrative status of an
interface. Make MII drivers forget about 'struct ifnet'.

Later plan is to provide an administrative downcall from ifnet
layer into drivers, to inform them about administrative status
change. If someone thinks that processing MII events for an
administratively down interface is a big problem, then drivers
would turn MII processing off.

The following MII drivers do evil things, like strcmp() on
driver name, so they still need knowledge of ifnet and thus
include if_var.h. They all need to be fixed:

sys/dev/mii/brgphy.c
sys/dev/mii/e1000phy.c
sys/dev/mii/ip1000phy.c
sys/dev/mii/jmphy.c
sys/dev/mii/nsphy.c
sys/dev/mii/rgephy.c
sys/dev/mii/truephy.c

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 18:40:17 +00:00
Pyun YongHyeon
cf402cc979 For RTL8211B or later PHYs, enable crossover detection and
auto-correction. This change makes re(4) establish a link with
a system using non-crossover UTP cable.

Tested by:	Michael BlackHeart < amdmiek <> gmail dot com >
2013-03-20 05:31:34 +00:00
Pyun YongHyeon
fed3ed710d Prefer RL_GMEDIASTAT register to RGEPHY_MII_SSR register to
extract a link status of PHY when parent driver is re(4).
RGEPHY_MII_SSR register does not seem to report correct PHY status
on some integrated PHYs used with re(4).
Unfortunately, RealTek PHYs have no additional information to
differentiate integrated PHYs from external ones so relying on PHY
model number is not enough to know that.  However, it seems
RGEPHY_MII_SSR register exists for external RealTek PHYs so
checking parent driver would be good indication to know which PHY
was used. In other words, for non-re(4) controllers, the PHY is
external one and its revision number is greater than or equal to 2.
This change fixes intermittent link UP/DOWN messages reported on
RTL8169 controller.

Also, mii_attach(9) is tried after setting interface name since
rgephy(4) have to know parent driver name.

PR:	kern/165509
2012-02-28 05:23:29 +00:00
Marius Strobl
604f5f1f77 Use DEVMETHOD_END. 2011-11-23 20:27:26 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
Marius Strobl
39bb2e5288 - Allow IFM_FLAG0 to be set indicating that auto-negotiation with manual
configuration, which is used to work around issues with certain setups
  (see r161237) by default, should not be triggered as it may in turn
  cause harm in some edge cases.
- Even after masking the media with IFM_GMASK the result may have bits
  besides the duplex ones set so just comparing it with IFM_FDX may lead
  to false negatives.
- Announce PAUSE support also for manually selected 1000BASE-T, but for
  all manually selected media types only in full-duplex mode. Announce
  asymmetric PAUSE support only for manually selected 1000BASE-T.
- Simplify setting the manual configuration bits to only once after we
  have figured them all out. This also means we no longer unnecessarily
  update the hardware along the road.
- Remove a stale comment.

Reviewed by:	yongari (plus additional testing)
MFC after:	3 days
2011-01-14 19:39:12 +00:00
Marius Strobl
991ab941ee - Change these drivers to take advantage and use the generic IEEE 802.3
annex 31B full duplex flow control as well as the IFM_1000_T master
  support committed in r215297. For atphy(4) and jmphy(4) this includes
  changing these PHY drivers to no longer unconditionally advertise
  support for flow control but only if the selected media has IFM_FLOW
  set (or MIIF_FORCEPAUSE is set).
- Rename {atphy,jmphy}_auto() to {atphy,jmphy}_setmedia() as these handle
  other media types as well.

Reviewed by:	yongari (plus additional testing)
Obtained from:	NetBSD (partially), OpenBSD (partially)
MFC after:	2 weeks
2010-11-14 13:31:01 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Marius Strobl
de1add1e45 - In the spirit of previous simplifications factor out the checks for a
different PHY instance being selected and isolation out into the wrappers
  around the service methods rather than duplicating them over and over
  again (besides, a PHY driver shouldn't need to care about which instance
  it actually is).
- Centralize the check for the need to isolate a non-zero PHY instance not
  supporting isolation in mii_mediachg() and just ignore it rather than
  panicing, which should sufficient given that a) things are likely to
  just work anyway if one doesn't plug in more than one port at a time and
  b) refusing to attach in this case just leaves us in a unknown but most
  likely also not exactly correct configuration (besides several drivers
  setting MIIF_NOISOLATE didn't care about these anyway, probably due to
  setting this flag for no real reason).
- Minor fixes like removing unnecessary setting of sc->mii_anegticks,
  using sc->mii_anegticks instead of hardcoded values etc.
2010-10-02 18:53:12 +00:00
Marius Strobl
7b9a15f73c Use the mii_data provided via mii_attach_args and mii_pdata respectively
instead of reaching out for the softc of the parent.
2010-09-27 20:31:03 +00:00
Kevin Lo
503765e486 Fix a copy/paste error 2008-08-06 07:52:59 +00:00
Pyun YongHyeon
c06cddfef8 Add RTL8211C(L) support.
Disable advanced link-down power saving in phy reset.

Reported by:	nork
Tested by:	nork
2008-07-02 08:10:18 +00:00
Pyun YongHyeon
b455d946f5 Add detection of isolation state.
PR:	kern/76710
2008-03-05 01:15:10 +00:00
Pyun YongHyeon
fa99a6317c Setting sc->mii_anegticks to MII_ANEGTICKS_GIGE in rgephy_attach()
is redundant. mii_phy_add_media() already takes care of that.

Pointed out by:	marius
2007-10-30 00:37:35 +00:00
Pyun YongHyeon
648bfbe6a7 Add support for RealTek RTL8211B(L) PHY. It's based on the patch
made by Michael Eisele and the patch was slightly modified by me.
With this change several NVIDIA ethernet controllers(e.g. MCP61)
works.

RTL8211B(L) is RealTek's new gigabit PHY. The PHY has several
features including crossover correction, polarity correction as
well as supporting triple speed(10/100/1000bps). Data transfer
between MAC and PHY is via RGMII for 1000baseT, MII for
10baseT/100baseTX.
Unfortunately, RealTek used the same model number for RTL8211B(L)
PHY so there is no way to discriminate between RTL8211B(L) and its
predecessors. ATM RTL8211B uses revision number 2 so checking the
revision number seems to be only way to identify it.

Obtained from:	Michael Eisele [1]
Tested by:	clemens fischer < ino-qc AT spotteswoode DOT de DOT eu DOT org >
2007-10-29 02:17:07 +00:00
Pyun YongHyeon
37fd5f0fed o RTL8169S/8110S integrated PHY and RTL8211B are gigabit PHYs so set
mii_anegticks to MII_ANEGTICKS_GIGE and use it. Previously it used
  to MII_ANEGTICKS which may not be enough to wait before retrying
  autonegotiation process at 1000bps.
o Reset autonegotation timer if media option is not IFM_AUTO or we
  got a valid link.
o Announce link loss right after it happends.
o Autonegiation is retried every mii_anegticks seconds.
o Report link state changes right after setting autonegotiation.
2007-10-29 02:06:15 +00:00
Marius Strobl
b91805b4cd Correct the previous change:
- If we want mii_phy_add_media() to add 1000baseT media, we need to
  supply sc->mii_extcapabilities.
- Fix formatting when announcing autonegotiation support.
2006-12-18 02:14:26 +00:00
Marius Strobl
ba76315fa2 - Don't set MIIF_NOISOLATE so rgephy(4) can be used in configurations
with multiple PHYs and un-comment case IFM_NONE in case MII_MEDIACHG
  rgephy_service(). There doesn't seem to be a problem with isolating
  RTL8169S and their internal PHY.
- Take advantage of mii_phy_add_media(). [1]

Obtained from:	NetBSD [1]
Tested by:	yongari
MFC after:	2 weeks
2006-12-02 19:48:53 +00:00
Marius Strobl
028ccec463 Some style changes to a couple of PHY drivers:
- Fix some whitespace nits.
- Fix some spelling in comments.
- Use MII_ANEGTICKS instead of 5.
- Don't define variables in nested scope.
- Remove superfluous returns at the end of void functions.
- Remove unused static global rgephy_mii_model.
- Remove dupe $Id$ in tdkphy(4).
- Sort brgphys table.

MFC after:	2 weeks
2006-12-02 19:36:25 +00:00
Marius Strobl
a35b933378 Add a helper function mii_phy_dev_probe(), which wraps around the
mii_phy_match() API and takes care of the PHY device probe based on
the struct mii_phydesc array and the match return value provided.
Convert PHY drivers to take advantage of mii_phy_dev_probe(),
converting drivers to provide a mii_phydesc table in the first
place where necessary.

Reviewed by:	yongari
MFC after:	2 weeks
2006-12-02 15:32:34 +00:00
Pyun YongHyeon
4eb561d2e8 Due to the poor PHY documentation from RealTek I can't sure but I
think the RealTek PHY needs driver to set RGEPHY_BMCR_AUTOEN bit of
RGEPHY_MII_BMCR register and proper ANAR register setting for manual
media type selection.
This fixes long standing manual media type selection bug in rgephy(4).

Reported by:	Jelte Jansen <jelte AT NLnetLabs DOT nl>
Tested by:	Jelte Jansen <jelte AT NLnetLabs DOT nl>
2006-08-12 01:38:49 +00:00
Pyun YongHyeon
5358725ab4 Replace hard-coded magic constants to system defined constants
(BUS_PROBE_DEFAULT, BUS_PROBE_GENERIC etc).
There is no functional changes.

Reviewed by:	oleg, scottl
2006-07-03 02:53:40 +00:00
Bill Paul
ed510fb04f Add support for the RealTek 8169SC/8110SC and RTL8101E devices. The
latter is a PCIe 10/100 chip.

Finally fix the EEPROM reading code so that we can access the EEPROMs on all
devices. In order to access the EEPROM, we must select 'EEPROM programming'
mode, and then set the EEPROM chip select bit. Previously, we were setting
both bits simultaneously, which doesn't work: they must be set in the
right sequence.

Always obtain the station address from the EEPROM, now that EEPROM
reading works correctly.

Make the TX interrupt moderation code based on the internal timer
optional and turned off by default.

Make the re_diag() routine conditional and off by default. When it is
on, only use it for the original 8169, which was the only device that
that really needed it.

Modify interrupt handling to use a fast interrupt handler and fast
taskqeueue.

Correct the rgephy driver so that it only applies the DSP fixup for
PHY revs 0 and 1. Later chips are fixed and don't need the fixup.

Make the rgephy driver advertise both 1000_FD and 1000_HD bits in
autoneg mode. A couple of the devices don't autoneg correctly unless
configured this way.
2006-06-26 20:31:32 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Warner Losh
7d830ac9c2 Use ansi function definitions in preference to K&R to reduce diffs
with NetBSD (and cause it looks cooler).
2005-09-30 19:39:27 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Poul-Henning Kamp
41ee9f1c69 Add some missing <sys/module.h> includes which are masked by the
one on death-row in <sys/kernel.h>
2004-05-30 17:57:46 +00:00
Marius Strobl
50aa106108 Remove double __FBSDID and move the remaining one into a common place after
the license(s) and before the driver comment (the latter only in drivers not
having __FBSDID at that location).
2004-05-29 18:09:10 +00:00
Andre Oppermann
9a54cbb95d Correct the phy_service() routine case MII_TICK to correctly track
the falling edge of a media state change.

This is in preparation for media state change notification to the
routing socket.

No objections by:	sam, wpaul, ru, bms
Brucification by:	bde
2004-05-03 13:01:34 +00:00
Bill Paul
d5a5045921 Clean up dead code. 2003-09-11 08:28:38 +00:00
Bill Paul
9bac70b851 Add a PHY driver to support the built-in gigE PHY in the 8169S/8110S
ethernet chips. This driver is pretty simple, however it contains
special DSP initialization code which is needed in order to get
the chip to negotiate a gigE link. (This special initialization
may not be needed in subsequent chip revs.) Also:

- Fix typo in if_rlreg.h (RL_GMEDIASTAT_1000MPS -> RL_GMEDIASTAT_1000MBPS)

- Deal with shared interrupts in re_intr(): if interface isn't up,
  return.

- Fix another bug in re_gmii_writereg() (properly apply data field mask)

- Allow PHY driver to read the RL_GMEDIASTAT register via the
  re_gmii_readreg() register (this is register needed to determine
  real time link/media status).
2003-09-11 03:53:46 +00:00