Commit Graph

659 Commits

Author SHA1 Message Date
Matthew Ahrens
1e0457e7f5 Enhance comments for large dnode project
Fix a few nits in the comments from large dnodes. Also import
some of the commit message as a comment in the code, making
it more accessible.

Reviewed-by: @rottegift 
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Matt Ahrens <mahrens@delphix.com>
Closes #6551
2017-08-29 09:00:28 -07:00
Tom Caputi
9b8407638d Send / Recv Fixes following b52563
This patch fixes several issues discovered after
the encryption patch was merged:

* Fixed a bug where encrypted datasets could attempt
  to receive embedded data records.

* Fixed a bug where dirty records created by the recv
  code wasn't properly setting the dr_raw flag.

* Fixed a typo where a dmu_tx_commit() was changed to
  dmu_tx_abort()

* Fixed a few error handling bugs unrelated to the
  encryption patch in dmu_recv_stream()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6512 
Closes #6524 
Closes #6545
2017-08-23 16:54:24 -07:00
Gvozden Neskovic
551905dd47 vdev_mirror: kstat observables for preferred vdev
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #6461
2017-08-21 10:05:54 -07:00
Gvozden Neskovic
d6c6590c5d vdev_mirror: load balancing fixes
vdev_queue:
- Track the last position of each vdev, including the io size,
  in order to detect linear access of the following zio.
- Remove duplicate `vq_lastoffset`

vdev_mirror:
- Correctly calculate the zio offset (signedness issue)
- Deprecate `vdev_queue_register_lastoffset()`
- Add `VDEV_LABEL_START_SIZE` to zio offset of leaf vdevs

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #6461
2017-08-21 10:05:16 -07:00
Brian Behlendorf
c8f9061fc7 Retire legacy test infrastructure
* Removed zpios kmod, utility, headers and man page.

* Removed unused scripts zpios-profile/*, zpios-test/*,
  zpool-config/*, smb.sh, zpios-sanity.sh, zpios-survey.sh,
  zpios.sh, and zpool-create.sh.

* Removed zfs-script-config.sh.in.  When building 'make' generates
  a common.sh with in-tree path information from the common.sh.in
  template.  This file and sourced by the test scripts and used
  for in-tree testing, it is not included in the packages.  When
  building packages 'make install' uses the same template to
  create a new common.sh which is appropriate for the packaging.

* Removed unused functions/variables from scripts/common.sh.in.
  Only minimal path information and configuration environment
  variables remain.

* Removed unused scripts from scripts/ directory.

* Remaining shell scripts in the scripts directory updated to
  cleanly pass shellcheck and added to checked scripts.

* Renamed tests/test-runner/cmd/ to tests/test-runner/bin/ to
  match install location name.

* Removed last traces of the --enable-debug-dmu-tx configure
  options which was retired some time ago.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6509
2017-08-15 17:26:38 -07:00
Don Brady
d977122da9 Add corruption failure option to zinject(8)
Added a 'corrupt' error option that will flip a bit in the data
after a read operation.  This is useful for generating checksum
errors at the device layer (in a mirror config for example). It
is also used to validate the diagnosis of checksum errors from
the zfs diagnosis engine.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6345
2017-08-14 15:17:15 -07:00
Tom Caputi
b525630342 Native Encryption for ZFS on Linux
This change incorporates three major pieces:

The first change is a keystore that manages wrapping
and encryption keys for encrypted datasets. These
commands mostly involve manipulating the new
DSL Crypto Key ZAP Objects that live in the MOS. Each
encrypted dataset has its own DSL Crypto Key that is
protected with a user's key. This level of indirection
allows users to change their keys without re-encrypting
their entire datasets. The change implements the new
subcommands "zfs load-key", "zfs unload-key" and
"zfs change-key" which allow the user to manage their
encryption keys and settings. In addition, several new
flags and properties have been added to allow dataset
creation and to make mounting and unmounting more
convenient.

The second piece of this patch provides the ability to
encrypt, decyrpt, and authenticate protected datasets.
Each object set maintains a Merkel tree of Message
Authentication Codes that protect the lower layers,
similarly to how checksums are maintained. This part
impacts the zio layer, which handles the actual
encryption and generation of MACs, as well as the ARC
and DMU, which need to be able to handle encrypted
buffers and protected data.

The last addition is the ability to do raw, encrypted
sends and receives. The idea here is to send raw
encrypted and compressed data and receive it exactly
as is on a backup system. This means that the dataset
on the receiving system is protected using the same
user key that is in use on the sending side. By doing
so, datasets can be efficiently backed up to an
untrusted system without fear of data being
compromised.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #494 
Closes #5769
2017-08-14 10:36:48 -07:00
Brian Behlendorf
c25b8f99f8 Simplify threads, mutexs, cvs and rwlocks
* Simplify threads, mutexs, cvs and rwlocks

* Update the zk_thread_create() function to use the same trick
  as Illumos.  Specifically, cast the new pthread_t to a void
  pointer and return that as the kthread_t *.  This avoids the
  issues associated with managing a wrapper structure and is
  safe as long as the callers never attempt to dereference it.

* Update all function prototypes passed to pthread_create() to
  match the expected prototype.  We were getting away this with
  before since the function were explicitly cast.

* Replaced direct zk_thread_create() calls with thread_create()
  for code consistency.  All consumers of libzpool now use the
  proper wrappers.

* The mutex_held() calls were converted to MUTEX_HELD().

* Removed all mutex_owner() calls and retired the interface.
  Instead use MUTEX_HELD() which provides the same information
  and allows the implementation details to be hidden.  In this
  case the use of the pthread_equals() function.

* The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had
  any non essential fields removed.  In the case of kthread_t
  and kcondvar_t they could be directly typedef'd to pthread_t
  and pthread_cond_t respectively.

* Removed all extra ASSERTS from the thread, mutex, rwlock, and
  cv wrapper functions.  In practice, pthreads already provides
  the vast majority of checks as long as we check the return
  code.  Removing this code from our wrappers help readability.

* Added TS_JOINABLE state flag to pass to request a joinable rather
  than detached thread.  This isn't a standard thread_create() state
  but it's the least invasive way to pass this information and is
  only used by ztest.

TEST_ZTEST_TIMEOUT=3600

Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4547 
Closes #5503 
Closes #5523 
Closes #6377 
Closes #6495
2017-08-11 08:51:44 -07:00
Brian Behlendorf
46364cb2f3 Add libtpool (thread pools)
OpenZFS provides a library called tpool which implements thread
pools for user space applications.  Porting this library means
the zpool utility no longer needs to borrow the kernel mutex and
taskq interfaces from libzpool.  This code was updated to use
the tpool library which behaves in a very similar fashion.

Porting libtpool was relatively straight forward and minimal
modifications were needed.  The core changes were:

* Fully convert the library to use pthreads.
* Updated signal handling.
* lmalloc/lfree converted to calloc/free
* Implemented portable pthread_attr_clone() function.

Finally, update the build system such that libzpool.so is no
longer linked in to zfs(8), zpool(8), etc.  All that is required
is libzfs to which the zcommon soures were added (which is the way
it always should have been).  Removing the libzpool dependency
resulted in several build issues which needed to be resolved.

* Moved zfeature support to module/zcommon/zfeature_common.c
* Moved ratelimiting to to module/zfs/zfs_ratelimit.c
* Moved get_system_hostid() to lib/libspl/gethostid.c
* Removed use of cmn_err() in zcommon source
* Removed dprintf_setup() call from zpool_main.c and zfs_main.c
* Removed highbit() and lowbit()
* Removed unnecessary library dependencies from Makefiles
* Removed fletcher-4 kstat in user space
* Added sha2 support explicitly to libzfs
* Added highbit64() and lowbit64() to zpool_util.c

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6442
2017-08-09 15:31:08 -07:00
gaurkuma
520faf5ddc Crash in dbuf_evict_one with DTRACE_PROBE
Update the dbuf__evict__one() tracepoint so that it can safely
handle a NULL dmu_buf_impl_t pointer.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>    
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: gaurkuma <gauravk.18@gmail.com>
Closes #6463
2017-08-09 11:04:41 -07:00
Ned Bass
8740cf4a2f Add line info and SET_ERROR() to ZFS debug log
Redefine the SET_ERROR macro in terms of __dprintf() so the error
return codes get logged as both tracepoint events (if tracepoints are
enabled) and as ZFS debug log entries.  This also allows us to use
the same definition of SET_ERROR() in kernel and user space.

Define a new debug flag ZFS_DEBUG_SET_ERROR=512 that may be bitwise
or'd into zfs_flags. Setting this flag enables both dprintf() and
SET_ERROR() messages in the debug log. That is, setting
ZFS_DEBUG_SET_ERROR and ZFS_DEBUG_DPRINTF|ZFS_DEBUG_SET_ERROR are
equivalent (this was done for sake of simplicity). Leaving
ZFS_DEBUG_SET_ERROR unset suppresses the SET_ERROR() messages which
helps avoid cluttering up the logs.

To enable SET_ERROR() logging, run:

  echo 1 >   /sys/module/zfs/parameters/zfs_dbgmsg_enable
  echo 512 > /sys/module/zfs/parameters/zfs_flags

Remove the zfs_set_error_class tracepoints event class since
SET_ERROR() now uses __dprintf(). This sacrifices a bit of
granularity when selecting individual tracepoint events to enable but
it makes the code simpler.

Include file, function, and line number information in debug log
entries.  The information is now added to the message buffer in
__dprintf() and as a result the zfs_dprintf_class tracepoints event
class was changed from a 4 parameter interface to a single parameter.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6400
2017-07-25 23:09:48 -07:00
Olaf Faaland
0582e40322 Add callback for zfs_multihost_interval
Add a callback to wake all running mmp threads when
zfs_multihost_interval is changed.

This is necessary when the interval is changed from a very large value
to a significantly lower one, while pools are imported that have the
multihost property enabled.

Without this commit, the mmp thread does not wake up and detect the new
interval until after it has waited the old multihost interval time.  A
user monitoring mmp writes via the provided kstat would be led to
believe that the changed setting did not work.

Added a test in the ZTS under mmp to verify the new functionality is
working.

Added a test to ztest which starts and stops mmp threads, and calls into
the code to signal sleeping mmp threads, to test for deadlocks or
similar locking issues.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6387
2017-07-25 13:22:20 -04:00
Serapheim Dimitropoulos
829f9251cf OpenZFS 8491 - uberblock on-disk padding to reserve space for smoothly merging zpool checkpoint & MMP in ZFS
The zpool checkpoint feature in DxOS added a new field in the uberblock.
The Multi-Modifier Protection Pull Request from ZoL adds three new fields
in the uberblock (Reference: https://github.com/zfsonlinux/zfs/pull/6279).
As these two changes come from two different sources and once upstreamed
and deployed will introduce an incompatibility with each other we want
to upstream a change that will reserve the padding for both of them so
integration goes smoothly and everyone gets both features.

Porting Notes: Preserved MMP comments in uberblock struct.

Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Olaf Faaland <faaland1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8491
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d84fa5f
Closes #6390
2017-07-24 13:47:51 -04:00
Brian Behlendorf
36ba27e9e0 Linux 4.13 compat: bio->bi_status and blk_status_t
Commit torvalds/linux@4e4cbee9.  The bio->bi_error field was
replaced with bio->bi_status which is an enum that describes
all possible error types.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6351
2017-07-23 19:37:12 -07:00
Olaf Faaland
379ca9cf2b Multi-modifier protection (MMP)
Add multihost=on|off pool property to control MMP.  When enabled
a new thread writes uberblocks to the last slot in each label, at a
set frequency, to indicate to other hosts the pool is actively imported.
These uberblocks are the last synced uberblock with an updated
timestamp.  Property defaults to off.

During tryimport, find the "best" uberblock (newest txg and timestamp)
repeatedly, checking for change in the found uberblock.  Include the
results of the activity test in the config returned by tryimport.
These results are reported to user in "zpool import".

Allow the user to control the period between MMP writes, and the
duration of the activity test on import, via a new module parameter
zfs_multihost_interval.  The period is specified in milliseconds.  The
activity test duration is calculated from this value, and from the
mmp_delay in the "best" uberblock found initially.

Add a kstat interface to export statistics about Multiple Modifier
Protection (MMP) updates. Include the last synced txg number, the
timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV
label that received the last MMP update, and the VDEV path.  Abbreviated
output below.

$ cat /proc/spl/kstat/zfs/mypool/multihost
31 0 0x01 10 880 105092382393521 105144180101111
txg   timestamp  mmp_delay   vdev_guid   vdev_label vdev_path
20468    261337  250274925   68396651780       3    /dev/sda
20468    261339  252023374   6267402363293     1    /dev/sdc
20468    261340  252000858   6698080955233     1    /dev/sdx
20468    261341  251980635   783892869810      2    /dev/sdy
20468    261342  253385953   8923255792467     3    /dev/sdd
20468    261344  253336622   042125143176      0    /dev/sdab
20468    261345  253310522   1200778101278     2    /dev/sde
20468    261346  253286429   0950576198362     2    /dev/sdt
20468    261347  253261545   96209817917       3    /dev/sds
20468    261349  253238188   8555725937673     3    /dev/sdb

Add a new tunable zfs_multihost_history to specify the number of MMP
updates to store history for. By default it is set to zero meaning that
no MMP statistics are stored.

When using ztest to generate activity, for automated tests of the MMP
function, some test functions interfere with the test.  For example, the
pool is exported to run zdb and then imported again.  Add a new ztest
function, "-M", to alter ztest behavior to prevent this.

Add new tests to verify the new functionality.  Tests provided by
Giuseppe Di Natale.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #745
Closes #6279
2017-07-13 13:54:00 -04:00
Dave Eddy
12fa0466df OpenZFS 6939 - add sysevents to zfs core for commands
Authored by: Dave Eddy <dave@daveeddy.com>
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Joshua M. Clulow <jmc@joyent.com>
Reviewed by: Josh Wilsdon <jwilsdon@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Alan Somers <asomers@gmail.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6939
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ce1577b
Closes #6328
2017-07-12 21:28:13 -07:00
LOLi
cf8738d853 Add port of FreeBSD 'volmode' property
The volmode property may be set to control the visibility of ZVOL
block devices.

This allow switching ZVOL between three modes:
   full - existing fully functional behaviour (default)
   dev  - hide partitions on ZVOL block devices
   none - not exposing volumes outside ZFS

Additionally the new zvol_volmode module parameter can be used to
control the default behaviour.

This functionality can be used, for instance, on "backup" pools to
avoid cluttering /dev with unneeded zd* devices.

Original-patch-by: mav <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>

FreeBSD-commit: https://github.com/freebsd/freebsd/commit/dd28e6bb
Closes #1796 
Closes #3438 
Closes #6233
2017-07-12 13:05:37 -07:00
Yuri Pankov
e19572e4cc OpenZFS 5428 - provide fts(), reallocarray(), and strtonum()
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
* All hunks unrelated to ZFS were dropped.

OpenZFS-issue: https://www.illumos.org/issues/5428
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4585130
Closes #6326
2017-07-08 20:35:35 -07:00
Matthew Ahrens
a896468c78 OpenZFS 8067 - zdb should be able to dump literal embedded block pointer
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8067
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085
Closes #6319
2017-07-07 11:28:01 -07:00
Alek P
0ea05c64f8 Implemented zpool scrub pause/resume
Currently, there is no way to pause a scrub. Pausing may
be useful when the pool is busy with other I/O to preserve
bandwidth.

This patch adds the ability to pause and resume scrubbing.
This is achieved by maintaining a persistent on-disk scrub state.
While the state is 'paused' we do not scrub any more blocks.
We do however perform regular scan housekeeping such as
freeing async destroyed and deadlist blocks while paused.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Serapheim Dimitropoulos <serapheimd@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6167
2017-07-06 22:16:13 -07:00
Andriy Gapon
8ca78ab002 OpenZFS 7600 - zfs rollback should pass target snapshot to kernel
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

The existing kernel-side code only provides a method to rollback to a
latest snapshot, whatever it happens to be at the time when the rollback
is actually done.  That could be unsafe or confusing in environments
where concurrent DSL changes are possible as the resulting state could
correspond to a newer or older snapshot than the originally requested
one.
This change allows to amend that method such that the rollback is
performed only when the latest snapshot has a specific name.  That is,
if a new snapshot is concurrently created or the target snapshot is
destroyed, then no rollback is done and EXDEV error is returned.
New libzfs_core function lzc_rollback_to() is provided for the new
functionality.  libzfs is changed to use lzc_rollback_to() to implement
zfs rollback command.
Perhaps we should return different errors to distinguish the case where
the desired snapshot exists but it's not the latest snapshot and the
case where the desired snapshot does not exist.

OpenZFS-issue: https://www.illumos.org/issues/7600
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3d645eb
Closes #6292
2017-07-04 15:29:52 -07:00
Andriy Gapon
1579dcbc91 OpenZFS 8416 - abd.h is not C++ friendly
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8416
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/589c189
Closes #6288
2017-06-30 11:11:01 -07:00
Andriy Gapon
2a53d6a12a OpenZFS 8426 - mark immutable buffer arguments as such in abd.h
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8426
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/37359a6
Closes #6287
2017-06-30 11:11:01 -07:00
Giuseppe Di Natale
d12f91fde3 OpenZFS 8264 - want support for promoting datasets in libzfs_core
Authored by: Andrew Stormont <astormont@racktopsystems.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@kebe.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8264
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a4b8c9a
Closes #6254
2017-06-26 16:56:09 -07:00
Tony Hutter
29eb494285 Dashes for zero latency values in zpool iostat -p
This prints dashes instead of zeros for zero latency values in
'zpool iostat -p'.  You'll get zero latencies reported when the
disk is idle, but technically a zero latency is invalid, since you
can't measure the latency of doing nothing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6210
2017-06-22 09:39:01 -07:00
Don Brady
0241e491a0 Inject zinject(8) a percentage amount of dev errs
In the original form of device error injection, it was an all or nothing
situation.  To help simulate intermittent error conditions, you can now
specify a real number percentage value. This is also very useful for our
ZFS fault diagnosis testing and for injecting intermittent errors during
load testing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6227
2017-06-16 17:21:11 -07:00
Richard Yao
5228cf0116 Make zvol operations use _by_dnode routines
This continues what was started in
0eef1bde31 by fully converting zvols
to avoid unnecessary dnode_hold() calls. This saves a small amount
of CPU time and slightly improves latencies of operations on zvols.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@prophetstor.com>
Closes #6058
2017-06-13 09:18:08 -07:00
Matthew Ahrens
dbeb879699 OpenZFS 8199 - multi-threaded dmu_object_alloc()
dmu_object_alloc() is single-threaded, so when multiple threads are
creating files in a single filesystem, they spend a lot of time waiting
for the os_obj_lock.  To improve performance of multi-threaded file
creation, we must make dmu_object_alloc() typically not grab any
filesystem-wide locks.

The solution is to have a "next object to allocate" for each CPU. Each
of these "next object"s is in a different block of the dnode object, so
that concurrent allocation holds dnodes in different dbufs.  When a
thread's "next object" reaches the end of a chunk of objects (by default
4 blocks worth -- 128 dnodes), it will be reset to the per-objset
os_obj_next, which will be increased by a chunk of objects (128).  Only
when manipulating the os_obj_next will we need to grab the os_obj_lock.
This decreases lock contention dramatically, because each thread only
needs to grab the os_obj_lock briefly, once per 128 allocations.

This results in a 70% performance improvement to multi-threaded object
creation (where each thread is creating objects in its own directory),
from 67,000/sec to 115,000/sec, with 8 CPUs.

Work sponsored by Intel Corp.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/8199
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/374
Closes #4703
Closes #6117
2017-06-09 09:43:26 -07:00
Giuseppe Di Natale
1b7c1e5ce9 OpenZFS 7578 - Fix/improve some aspects of ZIL writing
- After some ZIL changes 6 years ago zil_slog_limit got partially broken
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.

 - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG.  Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.

 - Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size.  In some
cases efficiency stopped to almost as low as 50%.  In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas.  This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently.  Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.

 - While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.

Sponsored by:   iXsystems, Inc.

Authored by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/7578
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac
Closes #6191
2017-06-09 09:15:37 -07:00
Matthew Ahrens
82644107c4 OpenZFS 8155 - simplify dmu_write_policy handling of pre-compressed buffers
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

When writing pre-compressed buffers, arc_write() requires that
the compression algorithm used to compress the buffer matches
the compression algorithm requested by the zio_prop_t, which is
set by dmu_write_policy(). This makes dmu_write_policy() and its
callers a bit more complicated.

We simplify this by making arc_write() trust the caller to supply
the type of pre-compressed buffer that it wants to write,
and override the compression setting in the zio_prop_t.

OpenZFS-issue: https://www.illumos.org/issues/8155
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b55ff58
Closes #6200
2017-06-07 14:16:01 -04:00
LOLi
3e6c943347 Linux 4.12 compat: fix super_setup_bdi_name() call
Provide a format parameter to super_setup_bdi_name() so we don't
create duplicate names in '/devices/virtual/bdi' sysfs namespace which
would prevent us from mounting more than one ZFS filesystem at a time.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6147
2017-05-25 09:55:55 -07:00
Alek P
bec1067d54 Implemented zpool sync command
This addition will enable us to sync an open TXG to the main pool
on demand. The functionality is similar to 'sync(2)' but 'zpool sync'
will return when data has hit the main storage instead of potentially
just the ZIL as is the case with the 'sync(2)' cmd.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6122
2017-05-19 12:33:11 -07:00
Tony Hutter
4a283c7f77 Force fault a vdev with 'zpool offline -f'
This patch adds a '-f' option to 'zpool offline' to fault a vdev
instead of bringing it offline.  Unlike the OFFLINE state, the
FAULTED state will trigger the FMA code, allowing for things like
autoreplace and triggering the slot fault LED.  The -f faults
persist across imports, unless they were set with the temporary
(-t) flag.  Both persistent and temporary faults can be cleared
with zpool clear.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6094
2017-05-19 12:30:16 -07:00
Brian Behlendorf
a9f0d7dd89 Fix large dnode send stream flag conflict
Bit 21 of the send stream flags was inadvertently used for two
different features under concurrent development.  To avoid any
future compatibility problems the large dnode flag is being
switched to bit 23 which is unused.

The large dnode feature has only been present in pre-releases of
ZoL and dnodesize defaults to legacy which is compatible with
existing OpenZFS implementations.  Users with dnodesize=auto
needing to use zfs send/recv must update ZoL on both the
source and destination systems.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6139
2017-05-18 10:02:16 -07:00
Isaac Huang
3d6da72d18 Skip spurious resilver IO on raidz vdev
On a raidz vdev, a block that does not span all child vdevs, excluding
its skip sectors if any, may not be affected by a child vdev outage or
failure. In such cases, the block does not need to be resilvered.
However, current resilver algorithm simply resilvers all blocks on a
degraded raidz vdev. Such spurious IO is not only wasteful, but also
adds the risk of overwriting good data.

This patch eliminates such spurious IOs.

Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes #5316
2017-05-12 17:28:03 -07:00
Matthew Ahrens
4747a7d3d4 OpenZFS 8063 - verify that we do not attempt to access inactive txg
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

A standard practice in ZFS is to keep track of "per-txg" state. Any of
the 3 active TXG's (open, quiescing, syncing) can have different values
for this state. We should assert that we do not attempt to modify other
(inactive) TXG's.

Porting Notes:
- ASSERTV added to txg_sync_waiting() for unused variable.

OpenZFS-issue: https://www.illumos.org/issues/8063
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/01acb46
Closes #6109
2017-05-10 13:52:22 -04:00
Brian Behlendorf
2946a1a15a Linux 4.12 compat: CURRENT_TIME removed
Linux 4.9 added current_time() as the preferred interface to get
the filesystem time.  CURRENT_TIME was retired in Linux 4.12.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6114
2017-05-10 09:30:48 -07:00
LOLi
a3eeab2de6 Add property overriding (-o|-x) to 'zfs receive'
This allows users to specify "-o property=value" to override and
"-x property" to exclude properties when receiving a zfs send stream.
Both native and user properties can be specified.

This is useful when using zfs send/receive for periodic
backup/replication because it lets users change properties such as
canmount, mountpoint, or compression without modifying the source.

References:
   https://www.illumos.org/issues/2745
   https://www.illumos.org/issues/3753

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #1350 
Closes #5349
2017-05-09 16:21:09 -07:00
Christian Schwarz
305bc4b370 Make createtxg and guid properties public
Document the existence of `createtxg` and `guid` native properties
in man pages and zfs command output.

One of the great features of ZFS is incremental replication of
snapshots, possibly between pools on different machines.

Shell scripts are commonly used to auomate this procedure. They have to
find the most recent common snapshot between both sides and then
perform incremental send & recv.
Currently, scripts rely on the sorting order of `zfs list`, which
defaults to `createtxg`, and the assumption that snapshot names on
either side do not change.

By making `createtxg` and `guid` part of the public ZFS interface,
scripts are enabled to use

  a) `createtxg` to determine the logical & temporal order of snapshots
     (the creation property is not an equivalent substitute since
      multiple snapshots may be created within one second)
  b) `guid` to uniquely identify a snapshot, independent of its current
      display name

This has the potential of making scripts safer and correct.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #6102
2017-05-09 15:36:53 -07:00
Chunwei Chen
e624cd1959 Linux 4.12 compat: PF_FSTRANS was removed
zfsonlinux/spl@8f87971 added __spl_pf_fstrans_check for the xfs related
check, so we use them accordingly.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #6113
2017-05-09 10:38:46 -07:00
Gvozden Neskovic
c17486b217 Add missing *_destroy/*_fini calls
The proposed debugging enhancements in zfsonlinux/spl#587
identified the following missing *_destroy/*_fini calls.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #5428
2017-05-04 19:26:28 -04:00
Richard Yao
bc17f1047a Enable Linux read-ahead for a single page on ZVOLs
Linux has read-ahead logic designed to accelerate sequential workloads.
ZFS has its own read-ahead logic called zprefetch that operates on both
ZVOLs and datasets. Having two prefetchers active at the same time can
cause overprefetching, which unnecessarily reduces IOPS performance on
CoW filesystems like ZFS.

Testing shows that entirely disabling the Linux prefetch results in
a significant performance penalty for reads while commensurate benefits
are seen in random writes. It appears that read-ahead benefits are
inversely proportional to random write benefits, and so a single page
of Linux-layer read-ahead appears to offer the middle ground for both
workloads.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #5902
2017-05-04 18:00:27 -04:00
LOLi
dddef7d600 More ashift improvements
This commit allow higher ashift values (up to 16) in 'zpool create'

The ashift value was previously limited to 13 (8K block) in b41c990
because the limited number of uberblocks we could fit in the
statically sized (128K) vdev label ring buffer could prevent the
ability the safely roll back a pool to recover it.

Since b02fe35 the largest uberblock size we support is 8K: this
allow us to store a minimum number of 16 uberblocks in the vdev
label, even with higher ashift values.

Additionally change 'ashift' pool property behaviour: if set it will
be used as the default hint value in subsequent vdev operations
('zpool add', 'attach' and 'replace'). A custom ashift value can still
be specified from the command line, if desired.

Finally, fix a bug in add-o_ashift.ksh caused by a missing variable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #2024 
Closes #4205 
Closes #4740 
Closes #5763
2017-05-03 09:31:05 -07:00
Olaf Faaland
9d3f7b8791 Write label 2,3 uberblocks when vdev expands
When vdev_psize increases, the location of labels 2 and 3 changes
because their location is relative to the end of the device.

The configs for labels 2 and 3 are written during the next spa_sync()
because the vdev is added to the dirty config list.  However, the
uberblock rings are not re-written in their new location, leaving the
device vulnerable to the beginning of the device being overwritten or
damaged.

This patch copies the uberblock ring from label 0 to labels 2 and 3,
in their new locations, at the next sync after vdev_psize increases.

Also, add a test zpool_expand_004_pos.ksh to confirm the uberblocks
are copied.

Reviewed-by: BearBabyLiu <liu.huang@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5108
2017-05-02 13:55:24 -07:00
LOLi
e7fbeb606a Add zfs_nicebytes() to print human-readable sizes
* Add zfs_nicebytes() to print human-readable sizes

Some 'zfs', 'zpool' and 'zdb' output strings can be confusing to the
user when no units are specified. This add a new zfs_nicenum_format
"ZFS_NICENUM_BYTES" used to print bytes in their human-readable form.

Additionally, update some test cases to use machine-parsable 'zfs get'.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #2414 
Closes #3185 
Closes #3594 
Closes #6032
2017-05-02 13:43:53 -07:00
Brian Behlendorf
7dae2c81e7 Linux 4.12 compat: super_setup_bdi_name()
All filesystems were converted to dynamically allocated BDIs.  The
destruction of backing_dev_info structures is handled as part of
super block destruction.  Refactor the code to abstract away the
details of creating and destroying a BDI.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6089
2017-05-02 09:46:18 -07:00
Chunwei Chen
692e55b8fe Reinstate zvol_taskq to fix aio on zvol
Commit 37f9dac removed the zvol_taskq for processing zvol requests.
This was removed as part of switching to make_request_fn and was
motivated by a concern at the time over dispatch latency.

However, this also made all bio request synchronous, and caused
serious performance issues as the bio submitter would wait for
every bio it submitted, effectively making the IO depth 1.

This patch reinstate zvol_taskq, and to make sure overlapped I/Os
are ordered properly, we take range lock in zvol_request, and pass
it along with bio to the I/O functions zvol_{write,discard,read}.

In order to facilitate benchmarks a zvol_request_sync module
option was added to switch between sync and async request handling.
For the moment, the default behavior is synchronous but this is
likely to change pending additional testing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #5824
2017-04-26 13:54:40 -07:00
Tony Hutter
d6418de057 Prebaked scripts for zpool status/iostat -c
This patch updates the "zpool status/iostat -c" commands to only run
"pre-baked" scripts from the /etc/zfs/zpool.d directory (or wherever
you install to).  The scripts can only be run from -c as an unprivileged
user (unless the ZPOOL_SCRIPTS_AS_ROOT environment var is
set by root).  This was done to encourage scripts to be written is such
a way that normal users can use them, and to be cautious.  If your
script needs to run a privileged command, consider adding the
appropriate line in /etc/sudoers.  See zpool(8) for an example of how
to do this.

The patch also allows the scripts to output custom column names.  If
the script outputs a line like:

name=value

then "name" is used for the column name, and "value" is its value.
Multiple columns can be specified by outputting multiple lines.  Column
names and values can have spaces.  If the value is empty, a dash (-) is
printed instead.

After all the "name=value" lines are read (if any), zpool will take the
next the next line of output (if any) and print it without a column
header.  After that, no more lines will be processed. This can be
useful for printing errors.

Lastly, this patch also disables the -c option with the latency and
request size histograms, since it produced awkward output and made the
code harder to maintain.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5852
2017-04-21 09:27:04 -07:00
Brian Behlendorf
e550644f0c OpenZFS 5120 - zfs should allow large block/gzip/raidz boot pool (loader project)
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- grub-2.02-beta2-422-gcad5cc0 includes support for large blocks.
- Commit 8aab121 allowed GZIP[1-9].
- Grub allows pools with multiple top-level vdevs.

OpenZFS-issue: https://www.illumos.org/issues/5120
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c8811bd
Closes #6007
2017-04-13 09:40:00 -07:00
Yuri Pankov
dbb38f6605 OpenZFS 6865 - want zfs-tests cases for zpool labelclear command
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Updated 'zpool labelclear' and 'zdb -l' such that they attempt
  to find a vdev given solely its short name.  This behavior is
  consistent with the upstream OpenZFS code and the test cases
  depend on it.  The actual implementation differs slightly due
  to device naming conventions on Linux.
- auto_online_001_pos, auto_replace_001_pos and add-o_ashift
  test cases updated to expect failure when no label exists.
- read_efi_label() and zpool_label_disk_check() are read-only
  operations and should use O_RDONLY at open time to enforce this.
- zpool_label_disk() and zpool_relabel_disk() write the partition
  information using O_DIRECT an fsync() and page cache invalidation
  to ensure a consistent view of the device.
- dump_label() in zdb should invalidate the page cache in order
  to get the authoritative label from disk.

OpenZFS-issue: https://www.illumos.org/issues/6865
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c95076c
Closes #5981
2017-04-11 09:54:39 -07:00