Commit Graph

777 Commits

Author SHA1 Message Date
Gordon Bergling
bae74ca922 ipfw(8): Fix a few mandoc related issues
- no blank before trailing delimiter
- missing section argument: Xr inet_pton
- skipping paragraph macro: Pp before Ss
- unusual Xr order: syslogd after sysrc
- tab in filled text

There were a few multiline NAT examples which used the .Dl macro with
tabs. I converted them to .Bd, which is a more suitable macro for that case.

MFC after:	1 week
2020-12-19 12:47:40 +00:00
Gordon Bergling
8636dd5703 ipfw(8): Bugfixes for some issues reported by mandoc
- whitespace at end of input line
- new sentence, new line
- skipping paragraph macro: Pp before Pp

MFC after:	1 week
2020-10-03 18:30:01 +00:00
Andrey V. Elsukov
b876085f55 Fix compatibility regression after r364117.
Properly handle the case, when some opcode keywords follow after
the `frag` opcode without additional options.

Reported by:	Evgeniy Khramtsov <evgeniy at khramtsov org>
2020-09-11 10:07:09 +00:00
Stefan Eßer
0fa427fe19 Change printf format string to include the extra blank
This is a follow up change to r364321 after a discussion about the style.
All near by places use extra blanks in format strings, and while use of the
format string to provide the extra blank may need more cycles than adding 1
to twidth, it generates shorter code and is clearer in the opinion of some
reviewers of the previous change.

Not objected to by:	emaste
MFC after:		3 days
2020-09-01 09:02:43 +00:00
Fernando Apesteguía
71230912a7 ipfw(8): Fix typo in man page
s/exmaple/example

Approved by:	manpages (gbe@)
Differential Revision:	https://reviews.freebsd.org/D26147
2020-08-21 17:45:17 +00:00
Ed Maste
c1b355d378 ipfw: line up ipfw -t list with and without timestamp
From the PR:
    When I run `ipfw -t list` on release/12 or current, I get misaligned
    output between lines that do and do not have a last match timestamp,
    like so:

    00100 Tue Aug 11 03:03:26 2020 allow ip from any to any via lo0
    00200                         deny ip from any to 127.0.0.0/8

    (specifically, the "allow" and "deny" strings do not line up)

PR:		248608
Submitted by:	Taylor Stearns
MFC after:	3 days
2020-08-17 18:53:23 +00:00
Gleb Smirnoff
825398f946 ipfw: make the "frag" keyword accept additional options "mf",
"df", "rf" and "offset".  This allows to match on specific
bits of ip_off field.

For compatibility reasons lack of keyword means "offset".

Reviewed by:	ae
Differential Revision:	https://reviews.freebsd.org/D26021
2020-08-11 15:46:22 +00:00
Andrey V. Elsukov
2403d47744 Fix SIGSEGV in ipfw(8) when NAT64 prefix length is omitted.
Submitted by:	Evgeniy Khramtsov <evgeniy at khramtsov org>
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D25734
2020-08-05 11:26:49 +00:00
Adrian Chadd
268a20a0e7 [ipfw] quieten maybe-uninitialized errors in ipfw when compiled under mips-gcc-6.3.0.
This is mostly an exercise to set variables to NULL/0 when declared, but
one was ensuring a string variable was set before printing it.
We should never see "<unknown>" in a printed rule; if we do then this code
definitely has some bugs that need addressing.
2020-07-14 05:07:16 +00:00
Mark Johnston
165236a101 ipfw(8): Handle unaligned pointers in pr_u64.
struct _ipfw_dyn_rule is defined as packed, and as a result, its
uint64_t fields are misaligned on some 32-bit platforms.  Since
pr_u64() is explicitly supposed to handle this case, avoid using a
uint64_t * for the input pointer to make sure that the compiler won't
(correctly) warn about the misalignment.

Reported by:	jenkins
MFC with:	r363164
2020-07-13 19:10:16 +00:00
Mark Johnston
56707bee4b ipfw(8): Fix most warnings with the default WARNS level.
- Add missing const and static qualifiers.
- Avoid shadowing the global "co" by renaming it to "g_co".
- Avoid mixing signedness in loop bound checks.
- Leave -Wcast-align warnings disabled for now.

Reviewed by:	ae, melifaro
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D25456
2020-07-13 17:51:04 +00:00
Mark Johnston
a3349dd906 ipfw: Support the literal IPv6 address syntax in the fwd command.
Discussed with:	rgrimes, Lutz Donnerhacke
Submitted by:	Neel Chauhan <neel AT neelc DOT org>
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D24011
2020-06-25 19:27:22 +00:00
Mark Johnston
27b3db9709 ipfw(8): In fill_ip6(), use a single statement for both "me" and "me6".
Submitted by:	Neel Chauhan <neel AT neelc DOT org>
Reviewed by:	rgrimes, Lutz Donnerhacke
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D24403
2020-06-24 15:05:42 +00:00
Andrey V. Elsukov
db1102f213 Use IP_FW_NAT44_DESTROY opcode for IP_FW3 socket option to destroy
NAT instance.

The NAT44 group of opcodes for IP_FW3 socket option is modern way
to control NAT instances and this method can be used in future to
switch from numeric to named NAT instances, like was done for ipfw
tables.
The IP_FW_NAT_DEL opcode is the last remnant of old ipfw_ctl control
plane that doesn't support versioned operations. This interface will
be retired soon.

Reviewed by:	melifaro
MFC after:	10 days
Sponsored by:	Yandex LLC
2020-03-24 12:27:02 +00:00
Alexander V. Chernikov
e3bf606c5d Revert r358858 as it breaks some ipfw(8) setups.
Reported by:	O. Hartmann <o.hartmann@walstatt.org>
2020-03-11 08:08:53 +00:00
Alexander V. Chernikov
8149b12da1 Don't assume !IPv6 is IPv4 in ipfw(8) add_src() and add_dst().
Submitted by:	Neel Chauhan <neel AT neelc DOT org>
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D21812
2020-03-10 20:30:21 +00:00
Eugene Grosbein
04777538e7 ipfw nat: add missing bits after r357092 (RFC 6598/Carrier Grade NAT)
Submitted by:	Neel Chauhan <neel AT neelc DOT org>
Reviewed by:	Lutz Donnerhacke
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D23448
2020-02-12 00:46:33 +00:00
Alexander V. Chernikov
75b893375f Add support for RFC 6598/Carrier Grade NAT subnets. to libalias and ipfw.
In libalias, a new flag PKT_ALIAS_UNREGISTERED_RFC6598 is added.
 This is like PKT_ALIAS_UNREGISTERED_ONLY, but also is RFC 6598 aware.
Also, we add a new NAT option to ipfw called unreg_cgn, which is like
 unreg_only, but also is RFC 6598-aware.  The reason for the new
 flags/options is to avoid breaking existing networks, especially those
 which rely on RFC 6598 as an external address.

Submitted by:	Neel Chauhan <neel AT neelc DOT org>
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D22877
2020-01-24 20:35:41 +00:00
Xin LI
f00c55e25a Use strlcat().
MFC after:	2 weeks
2019-11-30 05:57:54 +00:00
Andrey V. Elsukov
51b1593065 Explicitly initialize the memory buffer to store O_ICMP6TYPE opcode.
By default next_cmd() initializes only first u32 of opcode. O_ICMP6TYPE
opcode has array of bit masks to store corresponding ICMPv6 types.
An opcode that precedes O_ICMP6TYPE, e.g. O_IP6_DST, can have variable
length and during opcode filling it can modify memory that will be used
by O_ICMP6TYPE opcode. Without explicit initialization this leads to
creation of wrong opcode.

Reported by:	Boris N. Lytochkin
Obtained from:	Yandex LLC
MFC after:	3 days
2019-10-15 09:50:02 +00:00
Kyle Evans
c144616b7d ipfw: fix jail option after r348215
r348215 changed jail_getid(3) to validate passed-in jids as active jails
(as the function is documented to return -1 if the jail does not exist).
This broke the jail option (in some cases?) as the jail historically hasn't
needed to exist at the time of rule parsing; jids will get stored and later
applied.

Fix this caller to attempt to parse *av as a number first and just use it
as-is to match historical behavior. jail_getid(3) must still be used in
order for name arguments to work, but it's strictly a fallback in case we
weren't given a number.

Reported and tested by:	Ari Suutari <ari stonepile fi>
Reviewed by:	ae
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D21128
2019-08-05 00:08:25 +00:00
Andrey V. Elsukov
55507128b9 Restore ipfw(8)'s compact output support broken after r331668.
Also modify it a bit. Now -c option omits only 'from any to any' part
and works for different protocols (not just for ip).

Reported by:	Dmitry Selivanov <dseliv at gmail>
MFC after:	1 week
2019-06-25 09:08:24 +00:00
Andrey V. Elsukov
978f2d1728 Add "tcpmss" opcode to match the TCP MSS value.
With this opcode it is possible to match TCP packets with specified
MSS option, whose value corresponds to configured in opcode value.
It is allowed to specify single value, range of values, or array of
specific values or ranges. E.g.

 # ipfw add deny log tcp from any to any tcpmss 0-500

Reviewed by:	melifaro,bcr
Obtained from:	Yandex LLC
MFC after:	1 week
Sponsored by:	Yandex LLC
2019-06-21 10:54:51 +00:00
Andrey V. Elsukov
09899450ed Remove unused token that was added in r348235.
MFC after:	2 weeks
2019-05-27 06:34:36 +00:00
Andrey V. Elsukov
05ab1ef64e Add missing and or-flush options to "ipfw table <NAME> create"
command to simplify firewall reloading.

The `missing` option suppresses EEXIST error code, but does check that
existing table has the same parameters as new one. The `or-flush` option
implies `missing` option and additionally does flush for table if it
is already exist.

Submitted by:	lev
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D18339
2019-05-24 11:06:24 +00:00
Andrey V. Elsukov
761618de05 Handle HAVE_PROTO flag and print "proto" keyword for O_IP4 and O_IP6
opcodes when it is needed.
This should fix the problem, when printed by `ipfw show` rule could not
be added due to missing "proto" keyword.

MFC after:	2 weeks
2019-04-29 09:52:53 +00:00
Benedict Reuschling
da343996fa Typo fix in ipfw.8: amd -> and
There is an (obvious) typo in the following sentence:

"Please note, that keep-state amd limit imply implicit check-state for ..."

Replace the "amd" with "and", bump .Dd.

PR:			237438
Submitted by:		michael@galassi.us
MFC after:		3 days
2019-04-21 18:27:13 +00:00
Andrey V. Elsukov
9883abca1f Remove extra spaces.
MFC after:	1 month
2019-03-19 11:16:42 +00:00
Andrey V. Elsukov
d18c1f26a4 Reapply r345274 with build fixes for 32-bit architectures.
Update NAT64LSN implementation:

  o most of data structures and relations were modified to be able support
    large number of translation states. Now each supported protocol can
    use full ports range. Ports groups now are belongs to IPv4 alias
    addresses, not hosts. Each ports group can keep several states chunks.
    This is controlled with new `states_chunks` config option. States
    chunks allow to have several translation states for single alias address
    and port, but for different destination addresses.
  o by default all hash tables now use jenkins hash.
  o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
  o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
    special prefix "::" value should be used for this purpose when instance
    is created.
  o due to modified internal data structures relations, the socket opcode
    that does states listing was changed.

Obtained from:	Yandex LLC
MFC after:	1 month
Sponsored by:	Yandex LLC
2019-03-19 10:57:03 +00:00
Andrey V. Elsukov
d6369c2d18 Revert r345274. It appears that not all 32-bit architectures have
necessary CK primitives.
2019-03-18 14:00:19 +00:00
Andrey V. Elsukov
d7a1cf06f3 Update NAT64LSN implementation:
o most of data structures and relations were modified to be able support
  large number of translation states. Now each supported protocol can
  use full ports range. Ports groups now are belongs to IPv4 alias
  addresses, not hosts. Each ports group can keep several states chunks.
  This is controlled with new `states_chunks` config option. States
  chunks allow to have several translation states for single alias address
  and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
  special prefix "::" value should be used for this purpose when instance
  is created.
o due to modified internal data structures relations, the socket opcode
  that does states listing was changed.

Obtained from:	Yandex LLC
MFC after:	1 month
Sponsored by:	Yandex LLC
2019-03-18 12:59:08 +00:00
Andrey V. Elsukov
5c04f73e07 Add NAT64 CLAT implementation as defined in RFC6877.
CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is implemented as part of ipfw_nat64 kernel module. When module
is loaded or compiled into the kernel, it registers "nat64clat" external
action. External action named instance can be created using `create`
command and then used in ipfw rules. The create command accepts two
IPv6 prefixes `plat_prefix` and `clat_prefix`. If plat_prefix is ommitted,
IPv6 NAT64 Well-Known prefix 64:ff9b::/96 will be used.

  # ipfw nat64clat CLAT create clat_prefix SRC_PFX plat_prefix DST_PFX
  # ipfw add nat64clat CLAT ip4 from IPv4_PFX to any out
  # ipfw add nat64clat CLAT ip6 from DST_PFX to SRC_PFX in

Obtained from:	Yandex LLC
Submitted by:	Boris N. Lytochkin
MFC after:	1 month
Relnotes:	yes
Sponsored by:	Yandex LLC
2019-03-18 11:44:53 +00:00
Andrey V. Elsukov
002cae78da Add SPDX-License-Identifier and update year in copyright.
MFC after:	1 month
2019-03-18 10:50:32 +00:00
Andrey V. Elsukov
b11efc1eb6 Modify struct nat64_config.
Add second IPv6 prefix to generic config structure and rename another
fields to conform to RFC6877. Now it contains two prefixes and length:
PLAT is provider-side translator that translates N:1 global IPv6 addresses
to global IPv4 addresses. CLAT is customer-side translator (XLAT) that
algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses.
Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn)
translators.

Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept
prefix length and use plat_plen to specify prefix length.

Retire net.inet.ip.fw.nat64_allow_private sysctl variable.
Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to
configure this ability separately for each NAT64 instance.

Obtained from:	Yandex LLC
MFC after:	1 month
Sponsored by:	Yandex LLC
2019-03-18 10:39:14 +00:00
Guangyuan Yang
65847dc90a Fix typos and caps for ipfw(8) man page.
MFC after:	3 days
PR:		236030
Submitted by:	olgeni
2019-03-01 19:06:13 +00:00
Tom Rhodes
bdf56516d2 Grammar tweaks in ipfw manual page. 2019-02-28 20:43:03 +00:00
Bryan Drewery
10e3bebf9e Fix build of r343877
MFC after:	2 weeks
X-MFC-with:	r343877
Pointyhat to:	bdrewery
2019-02-07 21:41:27 +00:00
Bryan Drewery
2b3d664738 ipfw table list: Fix showing header outside of 'all'.
Properly pass down is_all to table_show_list().  This restores the behavior
before r272840 so that only 'ipfw table all list' shows the headers.

MFC after:	2 weeks
Relnotes:	yes
2019-02-07 21:05:44 +00:00
Andrey V. Elsukov
a5178bca19 Allow use underscores and dots in service names without escaping.
PR:		234237
MFC after:	1 week
2018-12-21 10:41:45 +00:00
Andrey V. Elsukov
a895c1c28a Rework how protocol number is tracked in rule. Save it when O_PROTO
opcode will be printed. This should solve the problem, when protocol
name is not printed in `ipfw -N show`.

Reported by:	Claudio Eichenberger <cei at yourshop.com>
MFC after:	1 week
2018-12-10 16:23:11 +00:00
Andrey V. Elsukov
5f9c94c592 Use correct size for IPv4 address in gethostbyaddr().
When u_long is 8 bytes, it returns EINVAL and 'ipfw -N show' doesn't work.

Reported by:	Claudio Eichenberger <cei at yourshop.com>
MFC after:	1 week
2018-12-10 15:42:13 +00:00
Andrey V. Elsukov
d66f9c86fa Add ability to request listing and deleting only for dynamic states.
This can be useful, when net.inet.ip.fw.dyn_keep_states is enabled, but
after rules reloading some state must be deleted. Added new flag '-D'
for such purpose.

Retire '-e' flag, since there can not be expired states in the meaning
that this flag historically had.

Also add "verbose" mode for listing of dynamic states, it can be enabled
with '-v' flag and adds additional information to states list. This can
be useful for debugging.

Obtained from:	Yandex LLC
MFC after:	2 months
Sponsored by:	Yandex LLC
2018-12-04 16:12:43 +00:00
Eugene Grosbein
3b78397008 Small language fix after r340978.
MFC after:	3 days
2018-11-26 16:10:20 +00:00
Eugene Grosbein
3a498c2e8a ipfw.8: add new section to EXAMPLES:
SELECTIVE MIRRORING
     If your network has network traffic analyzer connected to your host
     directly via dedicated interface or remotely via RSPAN vlan, you can
     selectively mirror some ethernet layer2 frames to the analyzer.
     ...
2018-11-26 16:02:17 +00:00
Guangyuan Yang
e9e747efe2 Fix a minor typo in ipfw(8) manual page.
PR:		230747
Submitted by:	f.toscan@hotmail.it
MFC after:	1 week
2018-11-23 03:42:05 +00:00
Guangyuan Yang
14b520eaa2 Fix incorrect DSCP value range from 0..64 to 0..63.
PR:		232786
Submitted by:	Sergey Akhmatov <sergey@akhmatov.ru>
Reviewed by:	AllanJude
MFC after:	1 week
2018-11-21 00:22:31 +00:00
Andrey V. Elsukov
5786c6b9f9 Make multiline APPLY_MASK() macro to be function-like.
Reported by:	cem
MFC after:	1 week
2018-11-20 18:38:28 +00:00
Eugene Grosbein
d95e8d6474 Fix part of the SYNOPSIS documenting LIST OF RULES AND PREPROCESSING
that is still referred as last section of the SYNOPSIS later
but was erroneously situated in the section IN-KERNEL NAT.

MFC after:	1 month
2018-11-13 13:57:15 +00:00
Andrey V. Elsukov
b2b5660688 Add ability to use dynamic external prefix in ipfw_nptv6 module.
Now an interface name can be specified for nptv6 instance instead of
ext_prefix. The module will track if_addr_ext events and when suitable
IPv6 address will be added to specified interface, it will be configured
as external prefix. When address disappears instance becomes unusable,
i.e. it doesn't match any packets.

Reviewed by:	0mp (manpages)
Tested by:	Dries Michiels <driesm dot michiels gmail com>
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D17765
2018-11-12 11:20:59 +00:00
Eugene Grosbein
6ff080c445 ipfw.8: fix small syntax error in an example
MFC after:	3 days
2018-11-08 13:17:38 +00:00