gets enabled when INVARIANTS is on instead of DIAGNOSTIC (which apparently
nobody uses). From Tor's description:
This happens when the block range spans two block maps, the first in the
inode (mapping up to NDADDR direct blocks) and the second being the first
indirect block. The current check assumes that both block maps are
indirect blocks.
Work done by: tegge
Tested by: kris, kensmith
is given (with newfs or tunefs) and dirsize overflows.
In case dirsize is <= 0 because of an overflow set maxcontigdirs
to 0 so it will be 1 later. This is what would happen for large
fs_avgfilesize. [1]
Identified with help from: roberto, pjd
Submitted by: pjd [1]
Approved by: re (rwatson)
MFC after: 8 days
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.
Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.
We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.
Reviewed by: csjp
Obtained from: TrustedBSD Project
inode's i_flag.
It's possible that after ufs_infactive() calls softdep_releasefile(),
i_nlink stays >0 for a considerable amount of time (> 60 seconds here).
During this period, any ffs allocation routines that alter di_blocks
must also account for the blocks in the filesystem's fs_pendingblocks
value.
This change fixes an eventual df/du discrepency that will happen as
the result of fs_pendingblocks being reduced to <0.
The only manifestation of this that people may recognise is the
following message on boot:
/somefs: update error: blocks -N files M
at which point the negative pending block count is adjusted to zero.
Reviewed by: tegge
MFC after: 3 weeks
1) Do not do quota accounting for the actual quota data files
or for file system snapshot files ("system" files). This
prevents a deadlock descibed in PR kern/30958 if the kernel
ever has to grow the quota file. Snapshot files were already
exempt from the quota checks, but this change generalized the check.
2) Fix a cast that caused extremely large uids/gids to incorrectly
write the quota information to the data file at a truncated
value for a uint_t32 id value. The incorrect cast caused quota
files in this case to be around 4GB in size, with the correct cast
they can now be 131GB in size. Also related to PR kern/30958.
3) Check for what appear to be negative UIDs/GIDs and not account
for them. This prevents the quota files from becoming 131GB in
size and causing quotacheck to run forever at bootup. This could
also cause the kernel to try and expand the quota file, which might
deadlock due to the issue in #1. kern/30958 and kern/38156
(and some much older closed PR's).
4) With the deadlock problems gone, the kernel can now expand the
size of the quota database files if it needs to.
5) Pass in the i-node count change value to chkiq and chkiqchg as an
int, like it used to be before the common routine was split up
into 2 different routines to increase / decrease the i-node in-use
count. Prevents an underflow on the i-node count. Related
to PR kern/89247.
6) Prevent the block usage from growing slowly if a file system is
full and the write was denied due to that fact. PR kern/89247.
Some of these changes require an updated quotacheck to prevent
the creation of huge (131GB) quota data files (item #3).
#1/#4 probably fixes a lot of the random hangs when quotas are enabled,
possibly some of the jail hangs.
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
has many positive effects including improved smp locking, reducing
interdependencies between mounts that can lead to deadlocks, etc.
- Add the softdep worklist and various counters to the ufsmnt structure.
- Add a mount pointer to the workitem and remove mount pointers from the
various structures derived from the workitem as they are now redundant.
- Remove the poor-man's semaphore protecting softdep_process_worklist and
softdep_flushworklist. Several threads may now process the list
simultaneously.
- Add softdep_waitidle() to block the thread until all pending
dependencies being operated on by other threads have been flushed.
- Use softdep_waitidle() in unmount and snapshots to block either
operation until the fs is stable.
- Remove softdep worklist processing from the syncer and move it into the
softdep_flush() thread. This thread processes all softdep mounts
once each second and when it is called via the new softdep_speedup()
when there is a resource shortage. This removes the softdep hook
from the kernel and various hacks in header files to support it.
Reviewed by/Discussed with: tegge, truckman, mckusick
Tested by: kris
reclamation. If the vnode previously was a fifo then v_op would point to
ffs_fifoops[12] instead of the expected ffs_vnodeops[12], causing a panic at
the end of ffsext_strategy.
stale flag bits left over from before the inode was recycled.
Without this change, a leftover IN_SPACECOUNTED flag could prevent
softdep_freefile() and softdep_releasefile() from incrementing
fs_pendinginodes. Because handle_workitem_freefile() unconditionally
decrements fs_pendinginodes, a negative value could be reported at
file system unmount time with a message like:
unmount pending error: blocks 0 files -3
The pending block count in fs_pendingblocks could also be negative
for similar reasons. These errors can cause the data returned by
statfs() to be slightly incorrect. Some other cleanup code in
softdep_releasefile() could also be incorrectly bypassed.
MFC after: 3 days
osf1_signal.c:1.41, amd64/amd64/trap.c:1.291, linux_socket.c:1.60,
svr4_fcntl.c:1.36, svr4_ioctl.c:1.23, svr4_ipc.c:1.18, svr4_misc.c:1.81,
svr4_signal.c:1.34, svr4_stat.c:1.21, svr4_stream.c:1.55,
svr4_termios.c:1.13, svr4_ttold.c:1.15, svr4_util.h:1.10,
ext2_alloc.c:1.43, i386/i386/trap.c:1.279, vm86.c:1.58,
unaligned.c:1.12, imgact_elf.c:1.164, ffs_alloc.c:1.133:
Now that Giant is acquired in uprintf() and tprintf(), the caller no
longer leads to acquire Giant unless it also holds another mutex that
would generate a lock order reversal when calling into these functions.
Specifically not backed out is the acquisition of Giant in nfs_socket.c
and rpcclnt.c, where local mutexes are held and would otherwise violate
the lock order with Giant.
This aligns this code more with the eventual locking of ttys.
Suggested by: bde
as they both interact with the tty code (!MPSAFE) and may sleep if the
tty buffer is full (per comment).
Modify all consumers of uprintf() and tprintf() to hold Giant around
calls into these functions. In most cases, this means adding an
acquisition of Giant immediately around the function. In some cases
(nfs_timer()), it means acquiring Giant higher up in the callout.
With these changes, UFS no longer panics on SMP when either blocks are
exhausted or inodes are exhausted under load due to races in the tty
code when running without Giant.
NB: Some reduction in calls to uprintf() in the svr4 code is probably
desirable.
NB: In the case of nfs_timer(), calling uprintf() while holding a mutex,
or even in a callout at all, is a bad idea, and will generate warnings
and potential upset. This needs to be fixed, but was a problem before
this change.
NB: uprintf()/tprintf() sleeping is generally a bad ideas, as is having
non-MPSAFE tty code.
MFC after: 1 week
very slow process, especially for large file systems that is just
recovered from a crash.
Since the summary is already re-sync'ed every 30 second, we will
not lag behind too much after a crash. With this consideration
in mind, it is more reasonable to transfer the responsibility to
background fsck, to reduce the delay after a crash.
Add a new sysctl variable, vfs.ffs.compute_summary_at_mount, to
control this behavior. When set to nonzero, we will get the
"old" behavior, that the summary is computed immediately at mount
time.
Add five new sysctl variables to adjust ndir, nbfree, nifree,
nffree and numclusters respectively. Teach fsck_ffs about these
API, however, intentionally not to check the existence, since
kernels without these sysctls must have recomputed the summary
and hence no adjustments are necessary.
This change has eliminated the usual tens of minutes of delay of
mounting large dirty volumes.
Reviewed by: mckusick
MFC After: 1 week
it is now quite naturally protected by the ufsmount mutex.
- Use the ufs lock to protect various fields in struct fs, primarily the
cg summary needs protection to avoid allocation races. Several
functions have been slightly re-arranged to reduce the number of
lock operations.
- Adjust several functions (blkfree, freefile, etc.) to accept a
ufsmount as an argument so that we may access the ufs lock.
Sponsored By: Isilon Systems, Inc.
prematurely report that they were full and/or to panic the kernel
with the message ``ffs_clusteralloc: allocated out of group''.
Submitted by: Henry Whincup <henry@jot.to>
MFC after: 1 week
This eliminates a bunch of vnode overhead (approx 1-2 % speed
improvement) and gives us more control over the access to the storage
device.
Access counts on the underlying device are not correctly tracked and
therefore it is possible to read-only mount the same disk device multiple
times:
syv# mount -p
/dev/md0 /var ufs rw 2 2
/dev/ad0 /mnt ufs ro 1 1
/dev/ad0 /mnt2 ufs ro 1 1
/dev/ad0 /mnt3 ufs ro 1 1
Since UFS/FFS is not a synchrousely consistent filesystem (ie: it caches
things in RAM) this is not possible with read-write mounts, and the system
will correctly reject this.
Details:
Add a geom consumer and a bufobj pointer to ufsmount.
Eliminate the vnode argument from softdep_disk_prewrite().
Pick the vnode out of bp->b_vp for now. Eventually we
should find it through bp->b_bufobj->b_private.
In the mountcode, use g_vfs_open() once we have used
VOP_ACCESS() to check permissions.
When upgrading and downgrading between r/o and r/w do the
right thing with GEOM access counts. Remove all the
workarounds for not being able to do this with VOP_OPEN().
If we are the root mount, drop the exclusive access count
until we upgrade to r/w. This allows fsck of the root
filesystem and the MNT_RELOAD to work correctly.
Set bo_private to the GEOM consumer on the device bufobj.
Change the ffs_ops->strategy function to call g_vfs_strategy()
In ufs_strategy() directly call the strategy on the disk
bufobj. Same in rawread.
In ffs_fsync() we will no longer see VCHR device nodes, so
remove code which synced the filesystem mounted on it, in
case we came there. I'm not sure this code made sense in
the first place since we would have taken the specfs route
on such a vnode.
Redo the highly bogus readblock() function in the snapshot
code to something slightly less bogus: Constructing an uio
and using physio was really quite a detour. Instead just
fill in a bio and ship it down.
preparation for integration of p4::phk_bufwork. In the future,
local filesystems will talk to GEOM directly and they will consequently
be able to issue BIO_DELETE directly. Since the removal of the fla
driver, BIO_DELETE has effectively been a no-op anyway.
somewhat clearer, but more importantly allows for a consistent naming
scheme for suser_cred flags.
The old name is still defined, but will be removed in a few days (unless I
hear any complaints...)
Discussed with: rwatson, scottl
Requested by: jhb
fragment to zero the valid parts of a VM_IO buffer.
RE would like this to be part of 4.10-RC3 so this will be MFC-ed immediately.
Reviewed by: alc, tegge
license, per letter dated July 22, 1999 and irc message from Robert
Watson saying that clause 3 can be removed from those files with an
NAI copyright that also have only a University of California
copyrights.
Approved by: core, rwatson
group block locked. If filesystem has any active snapshots, bawrite
can come back trying to allocate new snapshot data block from the same
cylinder group and cause panic due to recursive lock attempt.
PR: 64206
Reviewed by: mckusick
Tested by: pjd
those cylinder groups that have at least 75% of the average free
space per cylinder group for that file system are considered as
candidates for the creation of a new directory. The previous formula
for minbfree would set it to zero if the file system was more than
75% full, which allowed cylinder groups with no free space at all
to be chosen as candidates for directory creation, which resulted
in an expensive search for free blocks for each file that was
subsequently created in that directory.
Modify the calculation of minifree in the same way.
Decrease maxcontigdirs as the file system fills to decrease the
likelyhood that a cluster of directories will overflow the available
space in a cylinder group.
Reviewed by: mckusick
Tested by: kmarx@vicor.com
MFC after: 2 weeks
- Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT
flag to the initial BUF_LOCK(). This will eventually be used in cases
were we want to use a buffer only if it is not currently in use.
- Convert all consumers of the getblk() api to use this extra parameter.
Reviwed by: arch
Not objected to by: mckusick
is being taken from panicing with either "freeing free block" or
"freeing free inode". The problem arises when the snapshot code
is scanning the filesystem looking for inodes with a reference
count of zero (e.g., unlinked but still open) so that it can
expunge them from its view. If it encounters a reclaimed vnode
and has to restart its scan, then it will panic if it encounters
and tries to free an inode that it has already processed. The fix
is to check each candidate inode to see if it has already been
processed before trying to delete it from the snapshot image.
Sponsored by: DARPA & NAI Labs.
values for the initial inode generation numbers in newfs and for
newly allocated inode generation numbers in the kernel.
Submitted by: Theo de Raadt <deraadt@cvs.openbsd.org>
Sponsored by: DARPA & NAI Labs.
pointer types, and remove a huge number of casts from code using it.
Change struct xfile xf_data to xun_data (ABI is still compatible).
If we need to add a #define for f_data and xf_data we can, but I don't
think it will be necessary. There are no operational changes in this
commit.
this was causing filedesc work to be very painful.
In order to make this work split out sigio definitions to thier own header
(sigio.h) which is included from proc.h for the time being.
- v_vflag is protected by the vnode lock and is used when synchronization
with VOP calls is needed.
- v_iflag is protected by interlock and is used for dealing with vnode
management issues. These flags include X/O LOCK, FREE, DOOMED, etc.
- All accesses to v_iflag and v_vflag have either been locked or marked with
mp_fixme's.
- Many ASSERT_VOP_LOCKED calls have been added where the locking was not
clear.
- Many functions in vfs_subr.c were restructured to provide for stronger
locking.
Idea stolen from: BSD/OS
