DTB Overlays are useful to change/add nodes to a dtb without the need to
modify it.
Add support for building dtbo during buildkernel.
The goal of DTBO present in the FreeBSD source tree is to fill a gap in
time when we submit changes upstream (Linux). Instead of waiting 2 to 4 months
we can add a DTBO in tree in the meantime.
This is not for adding DTBO for capes/hat/addon boards, those will be
better to put in a ports.
This is also not for enabling a i2c/spi/pwm controller on certain pins,
each user have a different use case for those (which pins to use etc ...)
and we cannot have all possible configuration.
Add a dtbo for sun8i-h3-sid which add the SID node missing in upstream dts.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D14782
FreeBSD boots on this board, but the ethernet switch is not currently
supported, resulting in no ethernet.
A U-Boot port will be added once the ethernet switch is at least basically
supported, but we add its DTS to the build here to lower the barrier-to-boot
while work is underway.
sinovoip-bpi-m3.dts was disconnected from the build in r324822. Since then,
a CCU driver has been added and several other changes have been made to
make us compatible with upstream DTS for this board.
Add links for older DTB that might be used: our u-boot port was expecting
sinovoip-bpi-m3.dtb up until ports r455629, and our u-boot will not be
switching to the upstream name (sun8i-a83t-bananapi-m3) quite yet.
Discussed with: manu
Using latest U-Boot for RPI 1 or 2 the DTB loaded by the firmware is discarded.
The DTB was previously patched by the firmware to contain the DMA channel mask.
DTB provided by the rpi firmware or DTS in the Linux tree contain the raw value
directly. Do the same for our DTS as we cannot switch to the upstream ones yet.
Not having the DMA channel mask setup properly cause mmc not to be detected
(and probably other problems on driver using DMA).
Also, add links for rpi dtb to the name used by u-boot. This way the dtb can be
loaded by ubldr using the U-Boot env variable fdtfile.
Tested On: RPI B Rev2, RPI Zero, RPI 2 v1.1 RPI 2 v1.2
Thanks to Sylvain Garrigues <sylvain@sylvaingarrigues.com> for the help.
PR: 218344
H2+ SoC is a stripped down version of H3 without gigabit ethernet and 4K HDMI.
Also add sun8i-h2-plus-orangepi-zero.dts to the build as we run on this board.
default, and the fewer changes relative to the upstream u-boot the
better.
Add compatibility links for the old names.
Add dts file for BeagleBone Green while we're here.
The only difference between 3 and 3B is the size of the RJ45 port.
And now we have a uboot port that expect pcduino3.dts to be present.
Reported by: imp
It seems that the only way to supply dtb to loader on Zynq-based
SoCs is to manually generate dtb and place it to pre-defined location
on SD card or TFTP server where loader can pick it up. More modern
approach is to add modules/dtb/%soc% module and let installworld
target generate dtb and copy them to /boot/dtb/ where they can be
loaded by ubldr
* Use the Linux compat string
* Use EARLY_DRIVER_MODULE to attach at the right time
* Add a generic A10 kernel config file
* A20 now use generic_timer
* Add two new dts files for Olimex boards
* Update our custom DTS file for A10 and A20 to use the same compatible
property names as the vendor ones.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4792
