Commit Graph

452 Commits

Author SHA1 Message Date
Seigo Tanimura
07a1e11832 Add RSS0262 - 5614Jx3[G] V90+K56Flex Modem.
PR:		kern/18168
Submitted by:	Tony Voet <voet@engineer.com>
2000-05-19 10:02:15 +00:00
Seigo Tanimura
026957712e Add ACH2012 - 5634BTS 56K Video Ready Modem.
PR:		kern/17351
Submitted by:	Eric D. Futch <efutch@nyct.net>
2000-05-19 03:41:22 +00:00
Seigo Tanimura
ca39cee745 Add a couple of new PnP IDs.
o OZO800f - Zoom 2812 (56k Modem)
PR:		kern/18603
Submitted by:	Matt Loschert <loschert@servint.com>

o DAV0336 - DAVICOM 336PNP MODEM
PR:		kern/18608
Submitted by:	Martijn Plak <martijn@be3.com>
2000-05-18 02:06:24 +00:00
Yoshihiro Takahashi
bb7d754339 Use bus_space stuff except where it needs high performance.
Reviewed by:	bde
2000-05-12 12:37:28 +00:00
Seigo Tanimura
af2dfb5b69 Add the logical ID of FUJITSU Modem 33600 PNP/I2.
PR:		kern/18257
Submitted by:	Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
2000-05-02 05:54:11 +00:00
Warner Losh
b6f6dacdd3 Add support for pci modems. ONLY CONTROLLER BASED MODEMS. This
doesn't support winmodems, softmodems, hcf or any other modem that
relies on the host to do any sort of soft control for any aspect of
the modem's function.  There are two modems known to work:
	3COM FaxModem PCI.
	ActionTec 56k VoiceMessaging PCI Modem
and the following modem might work
	Multitech PCI FaxModem	(not sure about this)
and the serial pci cards might work too.  I have neither these
hardware items so I can't add support for them.
2000-04-01 06:14:21 +00:00
Peter Wemm
39f1e703ec Recognize USR3050 "U.S. Robotics 56K FAX INT" fax modem.
PR:		17702
Submitted by:	Scot W. Hetzel <hetzels@westbend.net>
2000-03-31 07:09:08 +00:00
Poul-Henning Kamp
91266b96c4 Isolate the Timecounter internals in their own two files.
Make the public interface more systematically named.

Remove the alternate method, it doesn't do any good, only ruins performance.

Add counters to profile the usage of the 8 access functions.

Apply the beer-ware to my code.

The weird +/- counts are caused by two repocopies behind the scenes:
	kern/kern_clock.c -> kern/kern_tc.c
	sys/time.h -> sys/timetc.h
(thanks peter!)
2000-03-20 14:09:06 +00:00
Warner Losh
633f93bee5 Fix crashes on card eject for pccard modems. We check for NULL when
we get the com address.  If so, we go ahead and return.  Bruce thinks
there's a bug in the pccard layer that it terminates devices with
extreme prejustice rather than letting them deside for themselves when
to terminate (and he's likely right).  This fix doesn't change that,
but instead works around it by checking for NULL pointers at more
places than before.

The detach routine still calls functions at interrupt level that
aren't reentrant.  In theory this could cause a problem, but none
showed up in practice.  Future versions should correct this problem,
likely by making the detach process a thread/process at the pccard
level.  NEWCARD will do this, and the current pccard layer should
likely be modified to that as well, should it live long enough.

A few style nits of the same form that were in my original patch sent
off to bde were also fixed as part of this process.  Mostly use of
!ptr and return ENOPARENS.

This should prevent a crash on suspend with an active ppp link as
well, but that wasn't tested.

Reviewed by:	bde
Approved by:	jkh
2000-03-11 20:22:09 +00:00
Peter Wemm
d365f16644 Recognize another modem, "PMC2430 - Pace 56 Voice Internal Modem"
Submitted by:	Mark Ovens <mark@ukug.uk.freebsd.org>
2000-03-05 14:44:05 +00:00
Peter Wemm
fee576b2e5 Fix two more problems with freeing the softc data manually. subr_bus.c
is responsible for this and this will lead to malloc 'freeing already
free' type panics.  One was in the probe code, the other was in the
pccard eject? code.

Not explicitly approved by: jkh (but the first is fallout from subr_bus.c
rev 1.54 which was an approved commit, the second is the same problem)
2000-03-02 03:45:41 +00:00
Bruce Evans
34ae9210dd Fixed regressions in rev.1.274:
1) Non-AST4 multiport cards were broken by bypassing the code that changes
   `idev' to the multiport master device.
2) AST4 multiport cards apparently were broken by inverting the test for
   the master device having an irq.
3) Error handling for nonexistent master devices was broken by removing a
   check for a null pointer.
4) `int' error codes returned by bus_get_resource() were assigned directly
   to the boolean variable com->no_irq.  Probably harmless, since the
   boolean is implemented as a u_char.

Submitted by:	part 1) by Chris Radek <cradek@in221.inetnebr.com>
		part 2) by yokota
Approved by:	jkh
2000-02-15 17:29:09 +00:00
Bruce Evans
689315d4f7 "Completed" the previous fix. Return ENOMEM on memory allocation failure
in sioattach(), not ENXIO.  Free resources before returning early in
sioprobe() and sioattach().
2000-01-29 03:02:55 +00:00
Nick Hibma
9c918de3de Return ENXIO on error, not 0. Seems to have been skipped when converting
to newbus.

Reviewed by:	bde
2000-01-23 15:11:15 +00:00
Peter Wemm
5995e84e19 Add another four device ID's for isa pnp modems. The USR's seem to use
the same vendor and logical ID.  The rest I am not sure whether they
are vendor or logical, but it won't hurt if I've put a vendor ID here
as merely will not match.  These came from the old sio-pnp code, hence
the uncertainty about which ID it is.
2000-01-18 09:30:58 +00:00
Andrew Gallatin
91dab55369 Make this compile on alpha 2000-01-13 02:09:44 +00:00
Kazutaka YOKOTA
35e61cbd71 Add a new mechanism, cndbctl(), to tell the console driver that
ddb is entered.  Don't refer to `in_Debugger' to see if we
are in the debugger.  (The variable used to be static in Debugger()
and wasn't updated if ddb is entered via traps and panic anyway.)

- Don't refer to `in_Debugger'.
- Add `db_active' to i386/i386/db_interface.d (as in
  alpha/alpha/db_interface.c).
- Remove cnpollc() stub from ddb/db_input.c.
- Add the dbctl function to syscons, pcvt, and sio. (The function for
  pcvt and sio is noop at the moment.)

Jointly developed by: bde and me

(The final version was tweaked by me and not reviewed by bde.  Thus,
if there is any error in this commit, that is entirely of mine, not
his.)

Some changes were obtained from: NetBSD
2000-01-11 14:54:01 +00:00
Peter Wemm
9928855f97 Recognize the GVC0505 (GVC 56k Faxmodem) as a sio device.
Obtained from: Dan J Fraser <dfraser@capybara.org> (for NetBSD)
1999-12-27 05:02:25 +00:00
Peter Wemm
684fb19e34 Extract a list of extra isa pnp modem ID's from NetBSD and OpenBSD. Some
of these are bound to have a PNP05xx compatid, but there's no easy way to
tell.  Since it's just an ID list and uses the pnp header's description
strings rather than encoding strings here, it doesn't seem to be too
expensive to err on the safe side.
1999-12-21 09:16:03 +00:00
Peter Wemm
99c215c08b Add SUP2070 (Diamond SupraExpress 56i)
Submitted by:  Kenneth Wayne Culver <culverk@wam.umd.edu>

Add MOT4560
Obtained from: wollman
1999-12-20 20:31:23 +00:00
Warner Losh
0712c356a3 o Make pccard work at all by including card.h
o fix return type of sio_pccard_detach
o don't free softc in deatch, since that is done by newbus
o disconnect interrupt we used to have.  Add cookie to com so that we can
  tear down the interrupt on unload
o Set gone earlier, but likely doesn't matter

This makes sio pccards work again.  Cards that are active when ejects may
not work (but they might, softc goes away quickly).

These changes are unreviewed by bde.  I'll make any style changes he wants.
1999-12-10 08:19:19 +00:00
Peter Wemm
4246912f31 Fix a pair of silly warnings that I introduced (that would have been
nasty on an Alpha or some other sizeof(int) != sizeof(long) machine).
1999-12-06 17:52:20 +00:00
Peter Wemm
d0029cf5f3 Use bus_get_resource() instead of bus_get_resource_start() as the latter
returns "0" on failure, which is indistinguishable from (say) irq 0.  This
should stop a couple of stray messages that turn up.

Also, if a BUS_SETUP_INTR() fails with INTR_TYPE_FAST, try falling back to
a normal interrupt.  This might help pccard folks with a shared slot
interrupt.  This whole thing needs to be revisited.
1999-12-06 06:47:02 +00:00
Warner Losh
e09f49b6fa Fix the hang on card eject problem and maybe the hang on suspend
problem.

o Create new timeout routine so we don't detach the card inside a ISR
  but instead drop back to spl0 via a timeout of 0.
o Actually delete the child of the pccard device rather than just faking
  it badly.
o Fix sio, ed and ep to have pccard detach routines that are int rather
  than void.
o Fix ep and ed pccard detach routines to use if_detach rather than just
  if_down.  if_detach destroys the device, while if_down just marks it
  down.  In this incarnation of the pccard things, we map the disable
  the slot action to detach the driver, which removes the driver from the
  device tree.  When that is done, a panic would soon follow as the
  ifconfig tried to down the device.

Didn't fix:
o Should cache the pccard dev child's pointer in struct slot
o remove now unused parts of struct slot
o Any driver using softc after detach has been called.  sio's softc used
  to be statically allocated, so you could check sc->gone, but that is
  now gone.
o Didn't remove gone from softc of drivers that use the old pccard method.

Didn't test:
o ed driver changes
o sio driver changes on pccards
o suspend (no laptop or apm support on my desktop)
1999-12-01 07:38:54 +00:00
Peter Wemm
592b1c00b5 Argh, don't turn the IIR test on unless it's a pccard. These tests mess
up the subsequent probes.
1999-11-18 10:29:06 +00:00
Peter Wemm
1447114333 Merge some typo fixes from dev/sio/sio.c (siostop -> comstop)
Remove EXTRA_SIO/NSIOTOT and make it fully dynamic (from dev/sio/sio.c)
Make sio work for pccard here - pccardd doesn't activate interrupts
until after prove has succeeded.
Mark the initial reset of likely sio ports as broken as it depended on
config supplying a list of locations to probe, devices are now proved
standalone.
Optimize a bit of COM_NOAST4() logic.
Use bus_get_resource_start() etc rather than using isa-centric calls.
Reactivate the IIR_TXRDYBUG test, I've got a card here with it.
Try to be a bit smarter about activating interrupts (ie: don't panic
if polled)
Fix some style bugs that have crept in over time (there are still more).
1999-11-18 07:22:41 +00:00
Warner Losh
806338b15d Last change to pccard_nbk now obviates the need to check the name of
the device in question.
Also fix warnings on if_ep_pccard.c
1999-10-28 05:06:14 +00:00
Warner Losh
a57cd933dc Add newbus pccard attachment for sio. Some of this code was written
by Peter Wemm, but I've not merged all the changes he sent to me yet.
This has not been reviewed by bde, so I'm committing to resolve any
issues he has with this when he returns from FreeBSD CON 99.

I've had four reports of this working for them.  I've been able to
communicate to both my built in modem and a pccard modem with these
patches.
1999-10-25 02:46:52 +00:00
Steve Price
004348c300 Add support for the USRobotics Courier V.Everything (USR0101) modem.
Submitted by:	Robert Blayzor <robert@superior.net>
1999-10-11 15:06:14 +00:00
Daniel Eischen
3c6967023c Change pnp ID for the SupraExpress 56i Sp V.90 modem (logical ID
0x8024b04e) so that the cards description is used instead of overriding
it.  While I'm here, add an ID for the SUP2080 and the SUP2030.

PR:		kern/13983
Submitted by:	Kurt D. Zeilenga <Kurt@OpenLDAP.Org> (SUP2030)
		dfr  (rest of change)
Reviewed by:	dfr
1999-10-03 22:25:19 +00:00
Daniel Eischen
c0d3a0d572 Add logical device ID for the Diamond SupraExpress 56K PnP modem:
Vendor ID SUP2480 (0x8024b04e), Serial Number 0x00001334
  PnP Version 1.0, Vendor Version 0
  Device Description: SupraExpress 56i Sp V.90

Reviewed by:	dfr
1999-10-03 17:50:09 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Poul-Henning Kamp
ae8e1d08d7 This patch clears the way for removing a number of tty related
fields in struct cdevsw:

        d_stop          moved to struct tty.
        d_reset         already unused.
        d_devtotty      linkage now provided by dev_t->si_tty.

These fields will be removed from struct cdevsw together with
d_params and d_maxio Real Soon Now.

The changes in this patch consist of:

        initialize dev->si_tty in *_open()
        initialize tty->t_stop
        remove devtotty functions
        rename ttpoll to ttypoll
        a few adjustments to these changes in the generic code
        a bump of __FreeBSD_version
        add a couple of FreeBSD tags
1999-09-25 16:21:39 +00:00
Peter Wemm
213fcefef2 Make it build, copy from dev/sio/sio.c:
isa_set_flags -> device_set_flags
isa_get_flags -> device_get_flags
1999-09-08 13:46:54 +00:00
Peter Wemm
f97d942bd0 Restore the old sio* - bruce can fix it himself. 1999-09-08 10:59:03 +00:00
Peter Wemm
e5174d14c5 Repo copy isa/sio* to dev/sio/sio* in preperation for extra bus methods
including pci.
Also, eliminate NSIOTOT and do it dynamically where it matters.
1999-09-06 14:06:23 +00:00
Peter Wemm
945f740363 Move the #if 0 to catch the card.h include and make sure it's zero. 1999-09-06 13:30:36 +00:00
Warner Losh
13264f28fb Start to disentangle the isa attachments from other buses. Partially
rewrite the pccard attachment case.  This is a work in progress, but
doesn't break the isa case.

I left the #if 0...#endif around the pccard stuff, at Peter's request,
so that normal users don't shoot themselves in the foot.

While I was here:
	o Indent a comment to the right location
	o Spell Unknown with a final 'n'.

Reviewed by: peter
1999-09-06 06:45:20 +00:00
Doug Rabson
bd64ce72a8 Add USR3031 pnp id.
Submitted by: Steve Price <sprice@hiwaay.net>
1999-09-04 14:31:56 +00:00
Doug Rabson
1c3111dc06 Remove the last vestiges of the old pnp code in favour of the new one. 1999-09-03 20:01:08 +00:00
Doug Rabson
4249382df0 This represents essentially a complete rewrite of the ISA PnP code. The
new system is integrated with the ISA bus code more cleanly and allows
the future addition of more enumerators such as PnPBIOS and ACPI.

This commit also enables the new pcm driver since it is somewhat tied to
the new PnP code.
1999-09-01 20:53:43 +00:00
Poul-Henning Kamp
c5b72c3d85 s/si_tty_tty/si_tty/g 1999-08-30 10:35:37 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Poul-Henning Kamp
f1fe3bf115 make alpha compile again. 1999-08-09 11:02:45 +00:00
Poul-Henning Kamp
ce9edcf5b5 Merge the cons.c and cons.h to the best of my ability. alpha may or
may not compile, I can't test it.
1999-08-09 10:35:05 +00:00
Poul-Henning Kamp
4cb4c215e5 Allocate and register struct tty on the fly. 1999-08-08 20:25:14 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Kazutaka YOKOTA
f94ae09657 Skip the device if it is disabled, when searching for a serial port
to be used for the kernel console in sccnprobe().
1999-06-29 17:34:16 +00:00
Kazutaka YOKOTA
6e8394b8ba The second phase of syscons reorganization.
- Split syscons source code into manageable chunks and reorganize
  some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV.  When this key is pressed, the vty
  immediately before the current vty will become foreground.  Analogue
  to PREV, which is usually assigned to the PrntScrn key.
  PR: kern/10113
  Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
  handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized.  It now should be slightly more
  robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
  APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
  SC_NO_HISTORY and SC_NO_SYSMOUSE.
  Various parts of syscons can be omitted so that the kernel size is
  reduced.

  SC_PIXEL_MODE
  Made the VESA 800x600 mode an option, rather than a standard part of
  syscons.

  SC_DISABLE_DDBKEY
  Disables the `debug' key combination.

  SC_ALT_MOUSE_IMAGE
  Inverse the character cell at the mouse cursor position in the text
  console, rather than drawing an arrow on the screen.
  Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

  SC_DFLT_FONT
  makeoptions "SC_DFLT_FONT=_font_name_"
  Include the named font as the default font of syscons.  16-line,
  14-line and 8-line font data will be compiled in.  This option replaces
  the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
  frame buffer.

- New kernel configuration option: VGA_WIDTH90
  Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60.  These
  modes are mot always supported by the video card.
  PR: i386/7510
  Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
  split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
  (another new file).  machine/console.h is still maintained for
  compatibility reasons.

- Kernel console selection/installation routines are fixed and
  slightly rebumped so that it should now be possible to switch between
  the interanl kernel console (sc or vt) and a remote kernel console
  (sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
  Because of the header file reorganization described above, screen
  savers and splash screen decoders are slightly modified.  After this
  update, /sys/modules/syscons/saver.h is no longer necessary and is
  removed.
1999-06-22 14:14:06 +00:00
Peter Wemm
20510b2017 Use the proper interfaces to find if a device is enabled, don't dig into
the bus mechanism's private internals!
1999-06-20 13:10:09 +00:00
Greg Lehey
89bf63adaa sioprobe: Don't try to initialize disabled ports. In particular,
attempting to initialize sio3 caused problems with ATI video boards,
which cleverly share the I/O space.

PR: kern/12295
1999-06-19 08:14:56 +00:00
Kirk McKusick
5e1a20fd26 COM_LLCONSOLE should over-ride COM_DEBUGGER request. 1999-06-15 22:15:10 +00:00
Poul-Henning Kamp
3faff79c9e The PPSAPI group defines the polarity in draft 3, we guessed it wrong. 1999-05-31 06:57:31 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Doug Rabson
46e1f231cd Simplistic pnp support. Needs more ids to be added. 1999-05-30 11:14:39 +00:00
Doug Rabson
0476a4d4ff Allow a sio port with its flags set to DEBUGGER+LLCONSOLE to be used for
gdb. This allows the sio probe for that port to be disabled which stops
it from confusing the debugger.
1999-05-28 09:37:11 +00:00
Doug Rabson
6f50cfb43a Use the resource apis to manipulate resources. 1999-05-22 15:47:34 +00:00
Doug Rabson
1d3710bdf3 Adjust console stuff now that makedev is no longer a macro. 1999-05-10 14:01:35 +00:00
Peter Wemm
d1935ba94c Make COM_ESP and COM_MULTIPORT compile for LINT. It might even work.. 1999-05-09 20:35:02 +00:00
Peter Wemm
1d361692a7 Optimize out a couple of places where com_addr() is used twice in a row,
although this is pretty trivial.  devclass_get_softc() is a tad more
expensive than the old com_addr() implementation.  If Bruce is really
worried about the cost of this, it could always be changed so that the
softc pointer is stored in a local array again.
1999-05-09 16:56:38 +00:00
Peter Wemm
6f42b336a5 Move opt_sio.h options to conf/options and activate in isa/sio.c 1999-05-09 13:10:49 +00:00
Poul-Henning Kamp
52400704e9 Unconfuse DEV_MODULE() and DEV_DRIVER_MODULE() about the difference between
a major number for a dev_t.
1999-05-09 13:00:50 +00:00
Poul-Henning Kamp
3000820ae0 add some amount of sanity to the way the gdb stuff finds its device.
I'm not too happy about the result either, but at least it has less
chance of backfiring.

This particular feature could be called "a mess" without offending
anybody.
1999-05-09 10:51:13 +00:00
Poul-Henning Kamp
1a4dd80a43 siocngetc & putc can be staticized. 1999-05-09 10:28:50 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Kirk McKusick
5c92a5b353 Get rid of extern declarations on gdb stuff so systems compiled without
DDB will compile. Warn users that try to use GDB without specifying a GDB
port in their configuration file.
1999-05-07 23:08:23 +00:00
Matt Jacob
49c36ff4f3 fix it so it compiles on alpha again 1999-05-07 17:52:01 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Kirk McKusick
e244fe31d6 Generalize to allow any serial port to be used as the GDB port.
Mark the GDB port in the config file with flags 0x80. Currently
only the sio driver checks these flags and sets up a GDB port,
but adding similar code to other serial drivers would be easy.
For backward compatibility, if an sio port is marked as the console
and no port is marked as the gdb port, the GDB port will be mapped
to the console port. This hack should go away at some point.
1999-05-07 06:50:41 +00:00
Peter Wemm
d5558c001a Fix up a few easy 'assignment used as truth value' and 'suggest parens
around && within ||' type warnings.  I'm pretty sure I have not masked
any problems here, I've committed real problem fixes seperately.
1999-05-06 18:44:42 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Dmitrij Tejblum
b079102dc5 Modify the non-i386 version of disable_intr() and enable_intr() so that they
don't produce a warning on every use.
1999-04-24 10:41:21 +00:00
Peter Wemm
f3a865fb76 Merge missing changes from i386/isa/sioreg.h (PC98 related) 1999-04-18 14:37:47 +00:00
Peter Wemm
0dd2ac5462 Tidy up a few things left over from the conversion from i386/isa/sio.c.
Leave two #if 0'd notes about the way things used to be done for reference.
1999-04-18 14:35:28 +00:00
Doug Rabson
e2117e478b Register sio interrupts as fast (fixing some silo overflow messages). 1999-04-18 14:11:01 +00:00
Peter Wemm
007e69315a Merge up to rev 1.234 (nice revision number!) of i386/isa/sio.c. 1999-04-17 01:02:27 +00:00
Peter Wemm
c976cd3849 Merge up to rev 1.226 of i386/isa/sio.c 1999-04-17 00:37:01 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Poul-Henning Kamp
4e2d2aa1cd Use suser() to check for super user rather than examining cr_uid directly.
Use TTYDEF_SPEED rather than 9600 a couple of places.

Reviewed by:	bde, with a few grumbles.
1999-01-30 12:17:38 +00:00
Peter Wemm
d17e4ee67d Update the pccard hooks to use a module style declaration instead. 1999-01-19 00:21:53 +00:00
Steve Price
921543cf2f Add support for another 3COM/USR PNP modem, USR3031. 1998-12-13 23:12:54 +00:00
Doug Rabson
08b6a4cbee * Add hooks to allow the X server to access I/O ports and memory.
* Update drivers to the latest version of the bus interface.

The ISA drivers' use of the new resource api is minimal.  Garrett has
some much cleaner drivers which should be more easily shared between
i386 and alpha.  This has only been tested on cia based machines.  It
should work on lca and apecs but I might have broken something.
1998-11-15 18:25:17 +00:00
Doug Rabson
6f19d636a6 Merge changes from i386/isa/sio.c up to revision 1.215. 1998-09-26 14:47:16 +00:00
Peter Wemm
d4a2828cde Underlying ,v files were copied and detagged. Re-commit old versions
onto the head revision.  (mainly using sys/bus.h etc for alpha)
1998-09-26 14:00:29 +00:00
Eivind Eklund
dfef928b1c Support PnP compatibility IDs. This allow e.g. the ed driver to pick
up any PnP NE2000 compatible card, instead of forcing us to always
update ID lists.

Submitted by:	Ugo Paternostro <paterno@dsi.unifi.it>
1998-09-13 22:15:44 +00:00
Bruce Evans
1fcee46997 Fixed printf format errors. 1998-08-23 10:16:26 +00:00
Bruce Evans
cf8c7b0963 Added D_TTY to the cdevswitch flags for all tty drivers. This is required
for the Lite2 fix for always returning EIO in dead_read().

Cleaned up the cdevswitch initializers for all tty drivers.

Removed explicit calls to ttsetwater() from all (tty) drivers.  ttsetwater()
is now called centrally for opens, not just for parameter changes.
1998-08-23 08:26:42 +00:00
Bruce Evans
9a02ad618f Fixed devfs initialization which I broke in the previous commit. 1998-08-20 05:12:48 +00:00
Bruce Evans
3fd2d29816 Enabled dynamically sized tty input buffers (with enough buffering
for 1 second's worth of input) and larger tty output buffers.  The
interrupt-level buffers are still too small for speeds above 115200
bps (only a little too small for 230400 bps if RTS flow control is
enabled).

Don't call ttsetwater() explicitly in open().  It is now called for
the TTYDISC l_open() and should be static.

Don't attempt to register the cdevsw more than once.
1998-08-19 04:17:38 +00:00
Bruce Evans
92971f1fd7 Register tty software interrupt handlers at run time using register_swi()
instead of at compile time using ifdefs.

Use _swi_null instead of dummycamisr.  CAM and dpt should call
register_swi() instead of hacking on ihandlers[] directly.
1998-08-11 17:01:32 +00:00
Bruce Evans
18da528d41 Changed %n to %r in devfs name format strings. %n has almost gone away. 1998-07-15 12:18:34 +00:00
Poul-Henning Kamp
e29bc9add4 Avoid some panics in sio_unload which gets called with various dirt
if the attach of a modem card failed.
1998-06-24 09:23:32 +00:00
Bruce Evans
eca52014bd Don't log "unexpected" events on never-opened devices. Events left
over from the probe are now expected for incompatible UARTs that
deliver IRQs as a strobe (low) instead of a level (high).

Discard events on going-away devices too.  Endless loops may have
been possible when an active pccard was removed.
1998-06-16 11:05:59 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Bruce Evans
12e1ed28e2 Force success of the probe (after doing it as before except in one
miscconfigured case) if the port is the console.  This fixes several
bugs:
- if all sioprobe()s failed, then the console driver followed null
  pointers in cdevsw[].
- if the sioprobe() for the console failed but another sioprobe()
  succeeded, then init hung early when the console couldn't be
  opened.
- it was silly for the console to not be there after printing boot
  messages on it.
Bugs introduced by this are hopefully no worse than old ones caused
by forcing the success of the `cn' level probe.
1998-06-03 12:30:10 +00:00
Bruce Evans
b76bb1d472 Fixed a printf() arg botch in the previous commit.
Only complain about an irq mismatch in the probe if the configured
irq doesn't become active, and then print the bitmap of irqs that
became active (including clock irqs) instead of just the first
(not including clock irqs).

Bugs reported by: msmith
1998-06-03 09:43:38 +00:00
Bruce Evans
cd55b8f46c Converted the ICU-level interrupt tests (3, 5 and 8) in sioprobe() into
a test of the irq number, and made failure of this test non-fatal.
Removed related unused complications for the APIC_IO case.  Removed the
no-test3 flag.

Deverbosified the failure messages for the other tests.  Removed the
per-port verbose flag - just use the general verbose flag.
1998-05-31 10:53:55 +00:00
Poul-Henning Kamp
d53fd54d9f LoadSoftModem() routine at sio.c does not trap general serial I/Os.
It fauls to probe eather DSI Modem or others.

PR:		4657
Reviewed by:	phk
Submitted by:	Kenji Saito <marukun@mx2.nisiq.net>
1998-05-20 06:46:58 +00:00
Poul-Henning Kamp
bdb8446393 The PnP code in 2.2.6 detects the Motorola ModemSurfer 56K,
but doesn't do much of anything with it.  I added it to siopnp_ids[]
and it was found and recognized as a serial port.

PR:		6605
Reviewed by:	phk
Submitted by:	Dave Marquardt <marquard@zilker.net>
1998-05-13 07:26:55 +00:00
Poul-Henning Kamp
b4362367e0 Detect USR PnP x2 modem.
PR:		6496
Reviewed by:	phk
Submitted by:	Kurt D. Zeilenga <Kurt@Boolean.NET>
1998-05-04 10:35:13 +00:00
Mike Smith
47959c89b9 PCCARD-code related style nits, as requested.
Submitted by:	bde
1998-02-27 06:39:32 +00:00
Mike Smith
9a70f9f75f Fix some style nits and remove an unused header.
Submitted by:	bde
1998-02-27 05:38:32 +00:00
Nate Williams
a021db1639 - If a PCCARD serial device is removed from the system, let the serial
driver 'break out' of the infinite loop waiting for a response from
  it.  This is a bad thing, but no worse than having the kernel hang.
1998-02-14 16:17:17 +00:00
Poul-Henning Kamp
a4daaa09f2 Implement the spirit but not the letter of Terrys hot-char patch.
The differences Terrys patch and this patch are:
 * Remove a lot of un-needed comments.
 * Don't put l_hotchar at the front of stuct linesw, there is no need to.
 * Use the #defines for the hotchar in the SLIP and PPP line disciplines
1998-02-13 12:46:28 +00:00
Eivind Eklund
7b778b5e61 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Atsushi Murai
844451dc95 1. Supporting a bogus 16550A compatible PCMCIA CARD stuffs
- IIR_TXRDY is never off even if reading a IIR register.
    - Know as PIAFS "Palido 321S", "DC-*S" oemed by Sharp corp.

 2. Omiting a restrict probing if it's already probed by pccardd.
    Note: Define a new id_flags as follows

           0x40000 - NO PROBE (Already probed as serial)
           0x80000 - Has a bogus IIR_TXRDY register

	Sato Junichi <junichi@astec.co.jp>
	Nrihiro Kumagai <kuma@slab.tnr.sharp.co.jp>
	Hirao Tetsuya <ai.cs.fujitsu.co.jp>
	Toshiharu Asai <asai@mbc.infoshere.or.jp>
	Shin'ya Kumabuchi <kumabu@t3.rim.or.jp>
        Freebsd-users-jp@jp.freebsd.org
	bsd-nomads@ai.cs.fujitsu.co.jp
1998-01-08 04:53:43 +00:00
Bruce Evans
88754aaf0e Fixed initialization of the divisor latch. We depended on siocnopen()
initializing it for the (usual) (siocniobase != 0) case, but
siocnopen() doesn't initialize it if the latch registers already
have the correct values.
1997-12-28 06:36:35 +00:00
Bruce Evans
e932603093 Always call ttwwakeup() before returning from comstart(). It isn't
necessary to call it when the tty layer's output state has not been
changed, but siostop() sometimes changes the TS_BUSY state and then
calls comstart() mainly for its side effect of calling ttwwakeup().
1997-12-28 06:20:47 +00:00
Eivind Eklund
5591b823d1 Make COMPAT_43 and COMPAT_SUNOS new-style options. 1997-12-16 17:40:42 +00:00
Bruce Evans
239b7b699e Use ENOIOCTL instead of -1 (= ERESTART) for tty ioctls that are
not handled at a particular level.  This fixes mainly restarting
of interrupted TIOCDRAINs and TIOCSETA{W,F}s.
1997-12-06 13:25:01 +00:00
Nate Williams
133c8c2f49 - Renamed <pccard/card.h> -> <pccard/cardinfo.h>.
Forgotten by:		me
Reminded by:		Bruce
1997-11-20 15:48:41 +00:00
Nate Williams
241fe562b4 - MF22: (I reversed these). Simplify code. 1997-11-02 21:26:14 +00:00
Nate Williams
075a76a29e - Instead of relying on a functional call to register PCARD-capable drivers,
use a Linker Set.  Note, if a driver is loaded as an LKM  if will have
  to use the function call, but since none of the existing drivers
  are loadable, this made things cleaner and boot messages nicer.

Obtained from:	PAO-970616
1997-10-26 21:08:42 +00:00
Nate Williams
8bb7a8fc95 - Functional changes to PCCARD support.
* Kill individual drivers 'suspend' routines, since there's no simple/safe
   way to suspend/resume a card w/out going through the complete probe
   at initialization time.
 * Default to using the apm_pccard_resume sysctl code, which basically
   pretends the card was removed, and then re-inserted.  Suspend/resume
   is now 'emulated' with a fake insert/removal.  (Hence we no longer
   need the driver-specific suspend routines.)
1997-10-26 04:54:16 +00:00
Nate Williams
e7e437dbfa - Do a bunch of gratuitous changes intended to make the code easier to
follow.
 * Rename/reorder all of the pccard structures, change many of the member
   names to be descriptive, and follow more closely other 'bus' drivers
   naming schemes.
 * Rename a bunch of parameter and local variable names to be more
   consistant in the code.
 * Renamed the PCCARD 'crd' device to be the 'card' device
 * KNF and make the code consistant where it was obvious.
 * ifdef'd out some unused code
1997-10-26 04:36:24 +00:00
Poul-Henning Kamp
a1c995b626 Last major round (Unless Bruce thinks of somthing :-) of malloc changes.
Distribute all but the most fundamental malloc types.  This time I also
remembered the trick to making things static:  Put "static" in front of
them.

A couple of finer points by:	bde
1997-10-12 20:26:33 +00:00
Justin T. Gibbs
02a199102d aha1542.c aic6360.c cy.c fd.c ft.c
if_ie.c if_wl.c if_zp.c isa.c isa_device.h
labpc.c mcd.c ncr5380.c scd.c seagate.c si.c
sio.c tw.c ultra14f.c wcd.c wd.c:

	Update for changes in the callout interface.

apic_vector.s icu_vector.s ipl.s ipl_funcs.c:

	Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
John-Mark Gurney
6a796ce0a1 teach sio how to attach to isa PnP cards. This is mainly for use with
internal modems.  Currently detects a USR modem, and a couple Supra
modems...  vendor id's for sio capabile cards welcomed...

document new option EXTRA_SIO that will increase sio's internal data
structures to support X more serial ports...  these are used by the
PnP part of sio for attaching...  If you don't have it specified, it
will default to 2...  This is defaulted to 0 if you don't have PnP
compiled into your kernel...

also document that if you set the PnP flags (pnp x flags y) to 0x1 that
the modem will be refused to be recognized by the sio driver... this
is for people that want the traditional isa driver to probe and attach
the modem... (for keeping legacy sio numbering)
1997-09-19 15:25:49 +00:00
Peter Wemm
35b8b2ddab Update select -> poll in drivers. 1997-09-14 03:19:42 +00:00
Steve Passe
1de995bb1f General cleanup of the sub-system locking macros.
Eliminated the RECURSIVE_MPINTRLOCK.
clock.c and microtime use clock_lock.
sio.c and cy.c use com_lock.

Suggestions by:	Bruce Evans <bde@zeta.org.au>
1997-09-01 07:45:37 +00:00
Steve Passe
adc91a77c1 Created a private simple_lock to control accesses to com data structs
and hardware.
There is now another simple_lock around clock data/hardware accesses in
clock.c and microtime.s.  It is my belief that this is the only area
sio/cy might stumble into during an unblocked INTerrupt.  Thus I separated
the sio/cy code from the generic disable_intr()/enable_intr() routines.

Controlled by smptests.h: USE_COMLOCK, ON by default.
1997-08-31 03:17:18 +00:00
Steve Passe
78292efeef Another round of lock pushdown.
Add a simplelock to deal with disable_intr()/enable_intr() as used in UP kernel.
UP kernel expects that this is enough to guarantee exclusive access to
regions of code bracketed by these 2 functions.
Add a simplelock to bracket clock accesses in clock.c: clock_lock.

Help from:	Bruce Evans <bde@zeta.org.au>
1997-08-30 08:08:10 +00:00
Steve Passe
f2cf811ca6 Fixed a warning about undefined isa_irq_pending(). (UP kernel only) 1997-08-21 06:16:12 +00:00
Steve Passe
b3e4e390f6 Moved the COM_LOCK and COM_UNLOCK macros to machine/param.h. 1997-08-21 05:47:25 +00:00
Steve Passe
7b185ef809 Preperation for moving cpl into critical region access.
Several new fine-grained locks.
New FAST_INTR() methods:
 - separate simplelock for FAST_INTR, no more giant lock.
 - FAST_INTR()s no longer checks ipending on way out of ISR.
sio made MP-safe (I hope).
1997-08-20 05:25:48 +00:00
Steve Passe
9d37772f68 Added include of intr_machdep.h to eliminate compiler warning for APIC_IO. 1997-08-04 19:12:54 +00:00
Bruce Evans
f71d35e402 Removed unused #includes. 1997-07-20 14:10:18 +00:00
John Dyson
955bc15107 Add some support for the 16650 type UARTS. 1997-07-17 06:01:15 +00:00
Paul Traina
5ea6cb03f3 Bring back CONSPEED as a last-ditch default if you can't change the speed
any other way.

Requested by: dfr
1997-06-04 16:25:15 +00:00
Paul Traina
2334749d02 If the boot blocks were using the serial port, read the system console
speed using the boot blocks, instead of a hardcoded value stuck in the
kernel.  This way, you can have systems using the same kernel but different
console speeds.

Add a sysctl entry for changing the system console speed.
Lock the user tty speed to match the system console speed.

Nuke CONSPEED.
Reviewed by:	bde
1997-06-04 04:52:40 +00:00
Poul-Henning Kamp
55d2795997 I've given up on the idea of sizing FIFO's. You can set it with a flag
value now, if you know that you have a fifo deeper than 16.
1997-06-01 20:42:01 +00:00
Peter Wemm
7a14de6260 No longer need opt_smp.h here 1997-05-29 05:00:35 +00:00
Poul-Henning Kamp
468d825d86 Whoops, missed a zero there. Flags 0x10000 it is. 1997-05-18 21:22:11 +00:00
Poul-Henning Kamp
e12ca851a6 Flags 0x1000 on sio now disables the dreaded test#3.
PR:		3395
1997-05-18 21:19:04 +00:00
Poul-Henning Kamp
8463cf03a9 Detect various supersets of 16550A based on fifo depth.
PR:		i386/3523
Reviewed by:	phk
Submitted by:	vak@cronyx.ru
1997-05-18 20:53:52 +00:00
Peter Wemm
477a642cee Man the liferafts! Here comes the long awaited SMP -> -current merge!
There are various options documented in i386/conf/LINT, there is more to
come over the next few days.

The kernel should run pretty much "as before" without the options to
activate SMP mode.

There are a handful of known "loose ends" that need to be fixed, but
have been put off since the SMP kernel is in a moderately good condition
at the moment.

This commit is the result of the tinkering and testing over the last 14
months by many people.  A special thanks to Steve Passe for implementing
the APIC code!
1997-04-26 11:46:25 +00:00
Bruce Evans
63e32a69f2 Don't call timeout() for DTR wakeup or busy check if the relevant timeout
is already active.  This fixes "timeout table full" panics under 100%
interrupt load and other weird conditions.
1997-04-18 18:28:09 +00:00
Bruce Evans
24bb2ffb15 Removed defaults for dead options CONADDR and CONUNIT. 1997-04-05 13:15:50 +00:00
Bruce Evans
de09b61a0c Use device flags instead of options for serial console configuration
(see LINT).  There is a new low-level console type that is more suitable
for use with gdb-remote.

Fixed setting of speed at probe time for the serial console (if any).

Reviewed by:	dfr
1997-04-05 13:11:27 +00:00
Bruce Evans
fce002fdef Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
Bruce Evans
3ac4d1ef0c Don't #include <sys/fcntl.h> in <sys/file.h> if KERNEL is defined.
Fixed everything that depended on getting fcntl.h stuff from the wrong
place.  Most things don't depend on file.h stuff at all.
1997-03-23 03:37:54 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Bruce Evans
d1adf9f099 Fixed the SMC fifo bug fix. sioopen() hung while input was streaming in
with <= 100 usec between each character arrival time.  This didn't happen
until rev.1.75 of clock.c because DELAY(100) used to delay for closer to
80 usec than 100 usec, and the minimum time between character arrivals is
87.8 usec at the maximum supported speed of 115200 bps 8N1.

Clear DCD timestamp flag on close (the input timestamp flag is already
cleared).
1997-02-01 16:04:16 +00:00
Bruce Evans
160da193e0 Fixes and workarounds for Hayes ESP:
- don't uselessly initialize the fifo "DMA" bit at attach time.
- initialize the fifo "DMA" bit at open time.  Without this, the device
  interrupts for every character received, reducing input performance
  to that of an 8250.
- don't uselessly initialize the fifo trigger level to 8 (scaled to
  256) at attach time.
- don't scale the fifo trigger level to 512 bytes.  The driver's pseudo-
  dma buffer has size 256, so it can't handle bursts of size 512 or 256.
  It should be able to handle the second lowest ftl (2 scaled to 64).
- don't reset the fifos in siostop().  Reset triggers a hardware bug
  involving wedging of the output interrupt bit  This workaround
  unfortunately requires ESP support to be configured.
1997-01-29 21:50:02 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
b75504fdc2 Use breakpoint() instead of Debugger() in siointr1(). Debugger() doesn't
work in fast interrupt handlers because it calls db_printf() which uses
%es for string stuff and %es isn't initialized.
1996-12-23 19:57:33 +00:00
Bruce Evans
c252c2507e Fixed input of BREAKs when IGNPAR is set and IGNBRK is not set. BREAKs
are always together with Framing Errors and they were incorrectly
treated as FE's and discarded.

Reorganized the BREAK/FE/PE tests.

Found by:	NIST-PCTS
1996-11-30 15:52:56 +00:00
Bruce Evans
eea9b0845f Reset h/w fifos (if any) in siostop(). Now ttyflush() works fairly well
with sio devices (not perfectly, since there is no way to flush the tx
holding register on 8250-16450's.  I'm not sure if resetting the fifos
flushes the tx shift register).

Reminded by:	NIST-PCTS
1996-11-30 15:29:31 +00:00
Bruce Evans
4670f800ec Fixed sloppy clearing of TS_BUSY. Don't clear it until the transmitter
is completely empty.  There is no interrupt for output completion, so
poll for it every 10 ms after output is nearly complete.  Now ttywait()
works right.

Reminded by:	NIST-PCTS
1996-11-30 15:19:19 +00:00
Bruce Evans
38e81cedcf Throw away input if CREAD is not set. POSIX requires no characters to be
received in this case even if the hardware doesn't have a CREAD bit.

Found by:	NIST-PCTS
1996-11-30 15:03:05 +00:00
Bruce Evans
9924e17950 Cleaned up CONSPEED changes. `comdefaultrate' gives the default
speed for the "com" console, not for general purpose "com" ports,
so there was no need to split it into comdefaultrate and condefaultrate.
1996-11-30 14:51:04 +00:00
Bruce Evans
750059bbc5 Don't fiddle with RTS if RTS flow control is off. This gives applications
almost complete control over RTS (control of its initial value is still
missing).

This fixes PR 1644 for sio.

The author of PR 1644 wants it in 2.1.6 and 2.2.  This may be safe since
the complications are only in rarely used cases that I hope I've covered.
1996-11-13 18:31:57 +00:00
Paul Traina
39daae723d add in CONSPEED option which controls console serial port speed 1996-11-02 02:26:06 +00:00
Bruce Evans
92d0aa20dc Work around UMC8669F and Startech UART bugs by not writing to the
divisor latch registers if the registers wouldn't change.

Use the default console cfcr setting while setting the divisor
latch registers for console i/o.  Input may be messed up by
transiently changing the cfcr.

Use a usual cfcr setting while setting the divisor latch registers
in the probe.  This shouldn't matter, but this is not the place to
test the UART's handling of 5 bit words.

Removed a stale devfs comment.
1996-09-30 12:22:27 +00:00
Bruce Evans
daed6ffd24 Changed cncheckc() interface so that it is 8-bit clean - return -1
instead of 0 if there is no input.

syscons.c:
Added missing spl locking in sccncheckc().  Return the same value as
sccngetc() would.  It is wrong for sccngetc() to return non-ASCII, but
stripping the non-ASCII bits doesn't help.
1996-09-14 04:27:46 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
Julian Elischer
75d050aeaa some internal modems need LOTS of time to generate an interrupt
on demand.. increase DELAY from 1000 uS to 10000uS
1996-07-17 22:07:23 +00:00
Bruce Evans
7d64a7fe80 Added support for TIOCDCDTIMESTAMP (enable/get timestamp of last DCD rise).
Original version by John Hay.

Simplified timestamp code by reading the time exactly when necessary.
This may slow down the interrupt handler with extra calls to microtime(),
but only in bad configurations - the input fifo should normally be
disabled if timestamps on input are being used, since otherwise the
timestamp won't be precisely associated with any particular input event.
The interrupt handler remains slowed down by one test and branch for
each input (and now DCD change) event - avoiding this is not practical
yet.

The simplifications also fixed:
- timestamps for input sometimes being clobbered by output and modem
  status interrupts.
- valid timestamps not being available unless the port is configured with
  vector siointrts.  siointrts no longer exists.
- compiler warnings about siointr* in some configurations.

Simplified timestamp and probe code by depending on recent changes in
microtime() and DELAY() to preserve the interrupt enable flag.
1996-06-17 14:23:39 +00:00
Poul-Henning Kamp
a8c5fef5e6 KGDB is dead. It may come back one day if somebody does it. 1996-05-02 09:34:51 +00:00
Nate Williams
e12ac36c96 Format the already applied PCCARD additions to use KNF form. No
functional changes.
1996-04-23 18:36:56 +00:00
Bruce Evans
aef18d6ed7 Another try: fixed bogus change of the fifo settings for the non-speed of 0.
rev.1.30 incorrectly changed the behaviour from always disabling the fifo
to always enabling it.
1996-04-13 14:55:18 +00:00
Bruce Evans
3745f80a48 Moved AUTO_EOI_[12] and most sio and pcvt options out of the makefile. 1996-04-11 21:18:49 +00:00
Marc G. Fournier
6d4bca5b8a removed RS_IBUFSIZE #ifndef - have been informed it was a bad idea 1996-04-10 18:09:58 +00:00
Marc G. Fournier
f4f119017f Placed an #ifndef around RS_IBUFSIZE so that it can be changed in the
config file ... PR#528 is reportly fixed by adding 'options RS_IBUFSIZE=1024'
to the config file
1996-04-10 04:18:36 +00:00
Bruce Evans
6c4591a089 Fixed ownerships of callout devices. 1996-03-27 20:03:32 +00:00
Bruce Evans
3b3bedbc0e Added some delays to the probe. This might fix some incompatible UARTs
(the ones that take more than a few hundred nsec and less than 1 msec to
switch their IRQ output).
1996-02-25 21:10:54 +00:00
Poul-Henning Kamp
e8cbe8fa47 Avoid local sprintfs and other printf'isms. 1996-01-25 07:21:50 +00:00
Garrett Wollman
0e41ee3037 Convert DDB to new-style option. 1996-01-04 21:13:23 +00:00
Bruce Evans
5c0ea38c00 Restored likely_com_ports[] from rev.1.122 so that Hayes ESP support at
least compiles.
1995-12-30 03:52:58 +00:00
Bruce Evans
768fd661e4 Added support for the Hayes ESP serial card.
Submitted by:	Sean Eric Fagan (sef@kithrup.com)
Based on code by John Vinopal (banshee@resort.com)
Cosmetic (I hope) changes by me (bde).
1995-12-29 12:51:32 +00:00
Bruce Evans
bfd6eab381 Fixed bugs introduced in rev. 1.127 (some broken 16650 support was
unintentionally committed):
- the fifo was completely disabled for low speeds.  Apart from being
  unnecessarily inefficient, this invalidated com->tx_fifo_size.
- `ftl' became a bogus name.
- the 16650 probe breaks the COM_NOFIFO() case and has other bugs
  (disabled, not fixed).

Fixed bogus change of the fifo settings for the non-speed of 0.  This
bug made the above fifo bug occur even at non-low speeds.

Fixed the modes of the cua devices.  It isn't possible to set the uid
and gid correctly since the kernel can't know who uucp.dialer is.

Register the devswitch at device attach time.  SYSINIT() is not
the right way to initialize devswitches (if anything :->).
Eventually, the devswitch should be deregistered at device detach
and/or unload time and reregistered at device attach time ...  Then
some com->gone tests could be removed.

Cleaned up some other recent changes.
1995-12-22 14:58:55 +00:00
Bruce Evans
81ab2caf0a Replaced nxreset by noreset (if the reset function gets called, then the
device must be configured.  It's hard to tell whether a reset function
should be noreset or nullreset since reset functions are never called.
Most drivers use nullreset but noreset has the advantage of complaining
if somehow gets called).
1995-12-10 20:54:38 +00:00
Bruce Evans
c73feca0b7 Removed new alias d_size_t for d_psize_t.
Removed old aliases d_rdwr_t and d_ttycv_t for d_read_t/d_write_t and
d_devtotty_t.

Sorted declarations of switch functions into switch order.

Removed duplicated comments and declarations of nonexistent switch
functions.
1995-12-10 15:55:34 +00:00
Poul-Henning Kamp
6f4e0beb7e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
Poul-Henning Kamp
d2f265fab8 Julian forgot to make the *devsw structures static. 1995-12-08 23:23:00 +00:00
Julian Elischer
87f6c6625d Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
Bruce Evans
86a1c05db0 Removed unnecessary #includes of <sys/user.h>. Some of these were just
to get the definitions of TRUE and FALSE which happen to be defined in
a deeply nested include.

Added nearby #includes of <sys/conf.h> where appropriate.
1995-12-06 23:44:23 +00:00
Bruce Evans
56cb20cd72 Removed builtin list of port addresses. The address for sio3
conflicted with S3 graphics cards.  Now users should put sio[2-3]
in the config file if the hardware exisst, even if the probe is
certain to fail due to an interrupt conflict.  Otherwise, ports
sharing the interrupt may fail the probe if the system is warm
booted while sio[2-3] are active (perhaps under another OS).  The
same problem for nonstandard ports is now handled better than
before.
1995-11-29 15:00:07 +00:00
Julian Elischer
7198bf4725 If you're going to mechanically replicate something in 50 files
it's best to not have a (compiles cleanly) typo in it! (sigh)
1995-11-29 14:41:20 +00:00
Julian Elischer
53ac6efbd8 OK, that's it..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..

Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.

some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.

BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...

If you want to add a new device in conf.c
please  make sure I know
so I can keep it up to date too..

as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)
1995-11-29 10:49:16 +00:00
Julian Elischer
7146c13e43 the second set of changes in a move towards getting devices to be
totally dynamic.

this is only the devices in i386/isa
I'll do more tomorrow.
they're completely masked by #ifdef JREMOD at this stage...
the eventual aim is that every driver will do a SYSINIT
at startup BEFORE the probes, which will effectively
link it into the devsw tables etc.

If I'd thought about it more I'd have put that in in this set (damn)
The ioconf lines generated by config will also end up in the
device's own scope as well, so ioconf.c will eventually be gutted
the SYSINIT call to the driver will include a phase where the
driver links it's ioconf line into a chain of such. when this phase is done
then the user can modify them with the boot: -c
config menu if he wants, just like now..
config will put the config lines out in the .h file
(e.g. in aha.h will be the addresses for the aha driver to look.)
as I said this is a very small first step..
the aim of THIS set of edits is to not have to edit conf.c at all when
adding a new device.. the tabe will be a simple skeleton..

when this is done, it will allow other changes to be made,
all teh time still having a fully working kernel tree,
but the logical outcome is the complete REMOVAL of the devsw tables.

By the end of this, linked in drivers will be exactly the same as
run-time loaded drivers, except they JUST HAPPEN to already be linked
and present at startup..
the SYSINIT calls will be the equivalent of the "init" call
made to a newly loaded driver in every respect.

For this edit,
each of the files has the following code inserted into it:

obviously, tailored to suit..
----------------------somewhere at the top:
#ifdef JREMOD
#include <sys/conf.h>
#define CDEV_MAJOR 13
#define BDEV_MAJOR 4
static void 	sd_devsw_install();
#endif /*JREMOD */
---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT
#ifdef JREMOD
        sd_devsw_install();
#endif /*JREMOD*/
-----------------------at the bottom:
#ifdef JREMOD
struct bdevsw sd_bdevsw =
	{ sdopen,	sdclose,	sdstrategy,	sdioctl,	/*4*/
	  sddump,	sdsize,		0 };

struct cdevsw sd_cdevsw =
	{ sdopen,	sdclose,	rawread,	rawwrite,	/*13*/
	  sdioctl,	nostop,		nullreset,	nodevtotty,/* sd */
	  seltrue,	nommap,		sdstrategy };

static sd_devsw_installed = 0;

static void 	sd_devsw_install()
{
	dev_t descript;
	if( ! sd_devsw_installed ) {
		descript = makedev(CDEV_MAJOR,0);
		cdevsw_add(&descript,&sd_cdevsw,NULL);
#if defined(BDEV_MAJOR)
		descript = makedev(BDEV_MAJOR,0);
		bdevsw_add(&descript,&sd_bdevsw,NULL);
#endif /*BDEV_MAJOR*/
		sd_devsw_installed = 1;
	}
}
#endif /* JREMOD */
1995-11-28 09:42:06 +00:00
Bruce Evans
6ad175be4d Restored static variable `nsio_tty' which is used only by pstat(8). Made
it `const' to inhibit compiler warnings.

Added #include of <pccard/driver.h> to get prototypes.  <pccard/slot.h>
is still necessary for its side effect of exporting non-slot things.
1995-11-21 09:15:04 +00:00
Poul-Henning Kamp
bf6a29da66 Fix compiler warnings. 1995-11-20 12:13:32 +00:00
Bruce Evans
4ff3de8e80 Added `#include "ioconf.h"' to <machine/conf.h> and cleaned up the
misplaced extern declarations (mostly prototypes of interrupt handlers)
that this exposed.  The prototypes should be moved back to the driver
sources when the functions are staticalized.

Added idempotency guards to <machine/conf.h>.  "ioconf.h" can't be
included when building LKMs so define a wart in bsd.kmod.mk to help
guard against including it.
1995-11-04 17:08:13 +00:00
Bruce Evans
4fda91c705 Moved prototypes for devswitch functions from conf.c and driver sources
to <machine/conf.h>.  conf.h was mechanically generated by
`grep ^d_ conf.c >conf.h'.  This accounts for part of its ugliness.  The
prototypes should be moved back to the driver sources when the functions
are staticalized.
1995-11-04 13:25:33 +00:00
Bruce Evans
f668386c04 sio.c:
Fix the tests for being a console by reverting to the ones that
were used before the the RB_SERIAL changes.  RB_SERIAL only needs
to be tested in one place.  The initialization of comconsole was
wrong before the RB_SERIAL changes for the COMCONSOLE case.  This
may have been the cause of the unnecessary changes.

Start eliminating #includes of <i386/i386/cons.h>.  This header is
supposed to be included from <machine> although it should be
completely machine-independent and included from <sys>.

Remove a wrong XXX comment.  `comconsole' is used to test for being
a console and even the tests for deciding the default termios state
are necessary (the semi-reentrant i/o routines don't handle ordinary
device i/o).

cy.c:
Sync with sio.c.  The console tests are present but always fail.
1995-10-22 15:38:08 +00:00
Poul-Henning Kamp
b59d7f4673 A mixed bag of changes, relating to getting the state in "lsdev" right,
and pccard support to work sensibly.  Better by far, but still not good.
1995-10-21 00:55:36 +00:00
David Greenman
b025187719 siostop() is a void function, so don't return a value. 1995-09-24 04:59:16 +00:00
Poul-Henning Kamp
ccdbc84cba The stuff needed to remove a pccard with a sio port on it...
Not optimal, but pretty solid.
1995-09-19 12:37:41 +00:00
Poul-Henning Kamp
0d2966d3f2 Andrew McRae's pcmcia/pccard code, the kernel part.
This is still very green, but I have managed to get my modem working.
Lots of work still to do, but now at least we can commit it. /phk

Reviewed by:	phk
Submitted by:	Andrew McRae <andrew@mega.com.au>
1995-08-24 08:56:20 +00:00
Bruce Evans
6097a1e94f Disable fifos in sioclose(). Closes PR 576. 1995-08-13 07:49:35 +00:00
Bruce Evans
1856afe955 Sleep on a better address to wait for output to drain out of the
hardware.  Set the sleep-on flag for the address so there is more
than a small chance that the sleep address is actually used (this
used to work by timing out).  Don't bother clearing the sleep-on
flag after a timeout here or elsewhere since leaving it set just
generates a few null calls to wakeup().
1995-07-31 21:10:36 +00:00
Bruce Evans
f3b37f91c1 Improve input flow control.
Use input buffer watermarks of TTYHOG-512 (high) and (high)*7/8
(low) instead of TTYHOG/2 (high) and TTYHOG/5 (low) to agree with
some drivers.  512 is magic and some things depended on TTYHOG/2
>= TTYHOG-512 to work; now they depend on the 512 magic not changing
and TTYHOG-512 being significantly larger than 0.  This should be
handled in ttsetwater().

Separate the decision about whether to do input flow control from
doing it.  ttyblock() now just starts input flow control (hardware
and/or software) and there is a new function ttyunblock() to stop
it.  The decisions are the same except for the watermark changes
and allowing for input expansion for PARMRK.

When flushing input, try harder at first to send a start character
if required, but give up if the first attempt fails.

cy.c, rc.c, sio.c:
Simplify: let ttyinput() handle input flow control if it is not
being bypassed.  Use ttyblock() to start flow control otherwise.

rc.c:
Use same input flow control test as elsewhere: test in a more
efficient order and start flow control at >= highwater instead of
at > highwater.
1995-07-31 18:29:51 +00:00
Bruce Evans
611c22c117 Don't let IXOFF or ECHONL stop the setting of TS_CAN_BYPASS_L_RINT. IXOFF
is handled at a low level, and ECHONL only applies if ICANON is set,
although tty.c sometimes bogusly applies it when ICANON isn't set.
1995-07-29 08:33:13 +00:00
Bruce Evans
4ce7d32178 Always wake up writers after clearing TS_BUSY. This will soon be
essential when I fix excessive wakeups for output-below-low-water.
In cy.c and sio.c, wake up via the driver start routine to also
eliminate duplicated code involving the clearing of TS_TTSTOP.

Always (except in code to be replaced soon) call driver start
routine directly instead of going through ttstart().
1995-07-29 04:05:57 +00:00
Bruce Evans
abe8bea470 Obtained from: partly from ancient patches of mine via 1.1.5
Give names to the magic tty i/o sleep addresses and use them.  This makes
it easier to remember what the addresses are for and to keep them unique.
1995-07-22 16:45:22 +00:00
Bruce Evans
a16721a13a Move the inline code for waking up writers to a new function
ttwwakeup().  The conditions for doing the wakeup will soon become
more complicated and I don't want them duplicated in all drivers.

It's probably not worth making ttwwakeup() a macro or an inline
function.  The cost of the function call is relatively small when
there is a process to wake up.  There is usually a process to wake
up for large writes and the system call overhead dwarfs the function
call overhead for small writes.
1995-07-22 01:30:45 +00:00
Bruce Evans
2ce42987d3 Obtained from: partly from ancient patches of mine via 1.1.5
Move static termioschars() from a couple of drivers to tty.c.  Now there
is only one copy of ttydefchars[].
1995-07-21 22:52:01 +00:00
Bruce Evans
aa96081f8b Fix error logging:
- get the timeout countdown right
- report everything before turning timeouts off.
1995-07-05 14:30:07 +00:00