Commit Graph

36 Commits

Author SHA1 Message Date
Pedro F. Giffuni
51369649b0 sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00
Konstantin Belousov
43f41dd393 Make struct syscall_args visible to userspace compilation environment
from machine/proc.h, consistently on all architectures.

Reviewed by:	jhb
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
X-Differential revision:	https://reviews.freebsd.org/D11080
2017-06-12 20:53:44 +00:00
Warner Losh
fbbd9655e5 Renumber copyright clause 4
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by:	Jan Schaumann <jschauma@stevens.edu>
Pull Request:	https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
Alan Cox
5730afc9b6 Handle spurious page faults that may occur in no-fault sections of the
kernel.

When access restrictions are added to a page table entry, we flush the
corresponding virtual address mapping from the TLB.  In contrast, when
access restrictions are removed from a page table entry, we do not
flush the virtual address mapping from the TLB.  This is exactly as
recommended in AMD's documentation.  In effect, when access
restrictions are removed from a page table entry, AMD's MMUs will
transparently refresh a stale TLB entry.  In short, this saves us from
having to perform potentially costly TLB flushes.  In contrast,
Intel's MMUs are allowed to generate a spurious page fault based upon
the stale TLB entry.  Usually, such spurious page faults are handled
by vm_fault() without incident.  However, when we are executing
no-fault sections of the kernel, we are not allowed to execute
vm_fault().  This change introduces special-case handling for spurious
page faults that occur in no-fault sections of the kernel.

In collaboration with:	kib
Tested by:		gibbs (an earlier version)

I would also like to acknowledge Hiroki Sato's assistance in
diagnosing this problem.

MFC after:	1 week
2012-03-22 04:52:51 +00:00
Konstantin Belousov
6bfe4c78c8 Remove unused define.
MFC after:	1 month
2011-10-07 16:09:44 +00:00
Konstantin Belousov
afe1a68827 Reorganize syscall entry and leave handling.
Extend struct sysvec with three new elements:
sv_fetch_syscall_args - the method to fetch syscall arguments from
  usermode into struct syscall_args. The structure is machine-depended
  (this might be reconsidered after all architectures are converted).
sv_set_syscall_retval - the method to set a return value for usermode
  from the syscall. It is a generalization of
  cpu_set_syscall_retval(9) to allow ABIs to override the way to set a
  return value.
sv_syscallnames - the table of syscall names.

Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding
the call to cpu_set_syscall_retval().

The new functions syscallenter(9) and syscallret(9) are provided that
use sv_*syscall* pointers and contain the common repeated code from
the syscall() implementations for the architecture-specific syscall
trap handlers.

Syscallenter() fetches arguments, calls syscall implementation from
ABI sysent table, and set up return frame. The end of syscall
bookkeeping is done by syscallret().

Take advantage of single place for MI syscall handling code and
implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and
PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the
thread is stopped at syscall entry or return point respectively.  The
EXEC flag augments SCX and notifies debugger that the process address
space was changed by one of exec(2)-family syscalls.

The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are
changed to use syscallenter()/syscallret(). MIPS and arm are not
converted and use the mostly unchanged syscall() implementation.

Reviewed by:	jhb, marcel, marius, nwhitehorn, stas
Tested by:	marcel (ia64), marius (sparc64), nwhitehorn (powerpc),
	stas (mips)
MFC after:	1 month
2010-05-23 18:32:02 +00:00
Konstantin Belousov
8bac98182a Style: use #define<TAB> instead of #define<SPACE>.
Noted by:	bde, pluknet gmail com
MFC after:	11 days
2010-04-27 09:48:43 +00:00
Konstantin Belousov
ed7806879b Move the constants specifying the size of struct kinfo_proc into
machine-specific header files. Add KINFO_PROC32_SIZE for struct
kinfo_proc32 for architectures providing COMPAT_FREEBSD32. Add
CTASSERT for the size of struct kinfo_proc32.

Submitted by:	pluknet
Reviewed by:	imp, jhb, nwhitehorn
MFC after:	2 weeks
2010-04-24 12:49:52 +00:00
Konstantin Belousov
9719da13e7 When doing rfork(0), i.e. separating curproc VM from any other user of
the same vmspace, decrement the reference count of the shared LDT instead
of a newly-made copy. Code factually removed LDT from the process that
did rfork(0).

Introduce user_ldt_deref() function that does decrement of refcount for
the struct proc_ldt, and call it in the rfork(0) case on the shared LDT.

Reviewed by:	jhb
MFC after:	1 week
2008-09-12 09:53:29 +00:00
Alexander Motin
2a57ca33c7 Move GET_STACK_USAGE from MI header to i386/amd64 MD ones.
Somebody who can, please feel free to implement it for other archs
or copy this one if it suits.
2008-01-31 08:24:27 +00:00
Jeff Roberson
0ad5e7f326 - Move GDT/LDT locking into a seperate spinlock, removing the global
scheduler lock from this responsibility.

Contributed by:	Attilio Rao <attilio@FreeBSD.org>
Tested by:	jeff, kkenn
2007-05-20 22:03:57 +00:00
John Baldwin
c6a37e8413 Divorce critical sections from spinlocks. Critical sections as denoted by
critical_enter() and critical_exit() are now solely a mechanism for
deferring kernel preemptions.  They no longer have any affect on
interrupts.  This means that standalone critical sections are now very
cheap as they are simply unlocked integer increments and decrements for the
common case.

Spin mutexes now use a separate KPI implemented in MD code: spinlock_enter()
and spinlock_exit().  This KPI is responsible for providing whatever MD
guarantees are needed to ensure that a thread holding a spin lock won't
be preempted by any other code that will try to lock the same lock.  For
now all archs continue to block interrupts in a "spinlock section" as they
did formerly in all critical sections.  Note that I've also taken this
opportunity to push a few things into MD code rather than MI.  For example,
critical_fork_exit() no longer exists.  Instead, MD code ensures that new
threads have the correct state when they are created.  Also, we no longer
try to fixup the idlethreads for APs in MI code.  Instead, each arch sets
the initial curthread and adjusts the state of the idle thread it borrows
in order to perform the initial context switch.

This change is largely a big NOP, but the cleaner separation it provides
will allow for more efficient alternative locking schemes in other parts
of the kernel (bare critical sections rather than per-CPU spin mutexes
for per-CPU data for example).

Reviewed by:	grehan, cognet, arch@, others
Tested on:	i386, alpha, sparc64, powerpc, arm, possibly more
2005-04-04 21:53:56 +00:00
Warner Losh
86cb007f9f /* -> /*- for copyright notices, minor format tweaks as necessary 2005-01-06 22:18:23 +00:00
Warner Losh
dc7949f45f bde points out that this can't do anything useful. The full patch has
other parts that I can't locat at the moment, so back it out until I can.
2004-06-28 05:37:22 +00:00
Warner Losh
f465e257e2 When opening /dev/io, preserve iopl properly. Otherwise, if you open
/dev/io multiple times, the first close remove the privs.
2004-06-28 03:16:32 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
John Baldwin
a8084030ad Add a per-thread variable for saving the state of eflags to support the
critical section code.
2003-11-03 21:30:00 +00:00
John Baldwin
ab79480392 Note that the sched_lock protects md_ldt of struct mdproc. 2002-10-25 20:06:16 +00:00
Poul-Henning Kamp
c2b6013026 It is too much work convincing lint why we would want empty structures,
so make the non-empty #ifdef lint.
2002-10-01 14:08:08 +00:00
Matthew Dillon
50b6a55512 Remove the critmode sysctl - the new method for critical_enter/exit (already
the default) is now the only method for i386.

Remove the paraphanalia that supported critmode.  Remove td_critnest, clean
up the assembly, and clean up (mostly remove) the old junk from
cpu_critical_enter() and cpu_critical_exit().
2002-07-10 20:15:58 +00:00
Matthew Dillon
d74ac6819b Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt
disablement assumptions in kern_fork.c by adding another API call,
cpu_critical_fork_exit().  Cleanup the td_savecrit field by moving it
from MI to MD.  Temporarily move cpu_critical*() from <arch>/include/cpufunc.h
to <arch>/<arch>/critical.c (stage-2 will clean this up).

Implement interrupt deferral for i386 that allows interrupts to remain
enabled inside critical sections.  This also fixes an IPI interlock bug,
and requires uses of icu_lock to be enclosed in a true interrupt disablement.

This is the stage-1 commit.  Stage-2 will occur after stage-1 has stabilized,
and will move cpu_critical*() into its own header file(s) + other things.
This commit may break non-i386 architectures in trivial ways.  This should
be temporary.

Reviewed by:	core
Approved by:	core
2002-03-27 05:39:23 +00:00
Alfred Perlstein
b63dc6ad47 Remove __P. 2002-03-20 05:48:58 +00:00
John Baldwin
0bbc882680 Overhaul the per-CPU support a bit:
- The MI portions of struct globaldata have been consolidated into a MI
  struct pcpu.  The MD per-CPU data are specified via a macro defined in
  machine/pcpu.h.  A macro was chosen over a struct mdpcpu so that the
  interface would be cleaner (PCPU_GET(my_md_field) vs.
  PCPU_GET(md.md_my_md_field)).
- All references to globaldata are changed to pcpu instead.  In a UP kernel,
  this data was stored as global variables which is where the original name
  came from.  In an SMP world this data is per-CPU and ideally private to each
  CPU outside of the context of debuggers.  This also included combining
  machine/globaldata.h and machine/globals.h into machine/pcpu.h.
- The pointer to the thread using the FPU on i386 was renamed from
  npxthread to fpcurthread to be identical with other architectures.
- Make the show pcpu ddb command MI with a MD callout to display MD
  fields.
- The globaldata_register() function was renamed to pcpu_init() and now
  init's MI fields of a struct pcpu in addition to registering it with
  the internal array and list.
- A pcpu_destroy() function was added to remove a struct pcpu from the
  internal array and list.

Tested on:	alpha, i386
Reviewed by:	peter, jake
2001-12-11 23:33:44 +00:00
John Baldwin
24db04598b Split the per-process Local Descriptor Table out of the PCB and into
struct mdproc.

Submitted by:	Andrew R. Reiter <arr@watson.org>
Silence on:	-current
2001-10-25 00:53:43 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
John Baldwin
6be523bca7 Add a new MI pointer to the process' trapframe p_frame instead of using
various differently named pointers buried under p_md.

Reviewed by:	jake (in principle)
2001-06-29 11:10:41 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Luoqi Chen
5206bca10a Enable vmspace sharing on SMP. Major changes are,
- %fs register is added to trapframe and saved/restored upon kernel entry/exit.
- Per-cpu pages are no longer mapped at the same virtual address.
- Each cpu now has a separate gdt selector table. A new segment selector
  is added to point to per-cpu pages, per-cpu global variables are now
  accessed through this new selector (%fs). The selectors in gdt table are
  rearranged for cache line optimization.
- fask_vfork is now on as default for both UP and SMP.
- Some aio code cleanup.

Reviewed by:	Alan Cox	<alc@cs.rice.edu>
		John Dyson	<dyson@iquest.net>
		Julian Elischer	<julian@whistel.com>
		Bruce Evans	<bde@zeta.org.au>
		David Greenman	<dg@root.com>
1999-04-28 01:04:33 +00:00
Peter Wemm
6f486a5552 Convert md_regs from an int[] to a struct trapframe *. It simplifies
some code.
1997-05-07 19:55:13 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Nate Williams
9368fc2012 hp300 -> i386 1996-04-10 05:27:11 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Garrett Wollman
6e393973f5 Made all header files idempotent and moved incorrect common data from
headers into a related source file.  Added cons.h as first step towards
moving i386/i386/cons.h to machine/cons.h where it belongs.
1993-11-07 17:43:17 +00:00
Rodney W. Grimes
34a8ed1be1 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 14:40:57 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00