Commit Graph

53 Commits

Author SHA1 Message Date
Peter Wemm
447b3772dc Change hw.physmem and hw.usermem to unsigned long like they used to be
in the original hardwired sysctl implementation.

The buf size calculator still overflows an integer on machines with large
KVA (eg: ia64) where the number of pages does not fit into an int.  Use
'long' there.

Change Maxmem and physmem and related variables to 'long', mostly for
completeness.  Machines are not likely to overflow 'int' pages in the
near term, but then again, 640K ought to be enough for anybody.  This
comes for free on 32 bit machines, so why not?
2002-08-30 04:04:37 +00:00
Poul-Henning Kamp
14a3a6ea0b Move a prototype to the least wrong place.
Suggested by:	bde
2002-08-02 18:45:43 +00:00
Poul-Henning Kamp
ab4db9b74f The Elan SC520 MMCR is actually 16bit wide, so u_char is inconvenient. 2002-07-31 13:45:44 +00:00
Poul-Henning Kamp
61658cf6a1 Add initialization code for the AMD Elan sc520 which maps the MMCR
into KVM and sets the i8254 frequency to the correct value.
2002-07-18 12:56:54 +00:00
Poul-Henning Kamp
2ce7d7a033 GC various bits and pieces of USERCONFIG from all over the place. 2002-04-09 11:18:46 +00:00
Bruce Evans
809dbbc99b Fixed some style bugs in the removal of __P(()). The main ones were
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses.  Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
2002-03-23 15:09:35 +00:00
Alfred Perlstein
b63dc6ad47 Remove __P. 2002-03-20 05:48:58 +00:00
John Baldwin
62da23f1e2 Back out part of KSE/M2 that snuck in under the radar: changing the
prototype of bzero() on the i386 to have a volatile first argument.

Requested by:	bde, jake
2002-02-27 22:12:29 +00:00
John Baldwin
289da3dd99 Apparently during the KSE M2 commit bzero() on the i386 was changed so that
it's first parameter was volatile.  Catch i486_bzero() and i586_bzero()'s
prototypes up to this to quiet warnings.
2002-02-08 19:16:47 +00:00
Dag-Erling Smørgrav
1f04261973 [partially forced commit due to pilot error in earlier commit attempt]
{set,fill}_{,fp,db}regs() fixup:

 - Add dummy {set,fill}_dbregs() on architectures that don't have them.

 - KSEfy the powerpc versions (struct proc -> struct thread).

 - Some architectures had the prototypes in md_var.h, some in reg.h, and
   some in both; for consistency, move them to reg.h on all platforms.

These functions aren't really MD (the implementation is MD, but the interface
is MI), so they should move to an MI header, but I haven't figured out which
one yet.

Run-tested on i386, build-tested on Alpha, untested on other platforms.
2001-10-21 22:16:48 +00:00
Peter Wemm
eb25edbda3 Cleanup and split of nfs client and server code.
This builds on the top of several repo-copies.
2001-09-18 23:32:09 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Peter Wemm
547a9e66fd vm_page_zero_idle() is no longer MD. 2001-08-25 04:54:25 +00:00
Peter Wemm
9d146ac5d1 Activate SSE/SIMD. This is the extra context switching support that
we are required to do if we let user processes use the extra 128 bit
registers etc.

This is the base part of the diff I got from:
  http://www.issei.org/issei/FreeBSD/sse.html
I believe this is by:  Mr. SUZUKI Issei <issei@issei.org>
SMP support apparently by: Takekazu KATO <kato@chino.it.okayama-u.ac.jp>
Test code by: NAKAMURA Kazushi <kaz@kobe1995.net>, see
  http://kobe1995.net/~kaz/FreeBSD/SSE.en.html

I have fixed a couple of style(9) deviations.  I have some followup
commits to fix a couple of non-style things.
2001-07-12 06:32:51 +00:00
Jake Burkholder
1eb44f0270 Remove the last of the MD netisr code. It is now all MI. Remove
spending, which was unused now that all software interrupts have
their own thread.  Make the legacy schednetisr use an atomic op
for setting bits in the netisr mask.

Reviewed by:	jhb
2000-12-05 00:36:00 +00:00
John Baldwin
8088699f79 - Overhaul the software interrupt code to use interrupt threads for each
type of software interrupt.  Roughly, what used to be a bit in spending
  now maps to a swi thread.  Each thread can have multiple handlers, just
  like a hardware interrupt thread.
- Instead of using a bitmask of pending interrupts, we schedule the specific
  software interrupt thread to run, so spending, NSWI, and the shandlers
  array are no longer needed.  We can now have an arbitrary number of
  software interrupt threads.  When you register a software interrupt
  thread via sinthand_add(), you get back a struct intrhand that you pass
  to sched_swi() when you wish to schedule your swi thread to run.
- Convert the name of 'struct intrec' to 'struct intrhand' as it is a bit
  more intuitive.  Also, prefix all the members of struct intrhand with
  'ih_'.
- Make swi_net() a MI function since there is now no point in it being
  MD.

Submitted by:	cp
2000-10-25 05:19:40 +00:00
John Baldwin
1931cf940a - Heavyweight interrupt threads on the alpha for device I/O interrupts.
- Make softinterrupts (SWI's) almost completely MI, and divorce them
  completely from the x86 hardware interrupt code.
  - The ihandlers array is now gone.  Instead, there is a MI shandlers array
    that just contains SWI handlers.
  - Most of the former machine/ipl.h files have moved to a new sys/ipl.h.
- Stub out all the spl*() functions on all architectures.

Submitted by:	dfr
2000-10-05 23:09:57 +00:00
Peter Wemm
37b087a645 Clean up some low level bootstrap code:
- stop using the evil 'struct trapframe' argument for mi_startup()
  (formerly main()).  There are much better ways of doing it.
- do not use prepare_usermode() - setregs() in execve() will do it
  all for us as long as the p_md.md_regs pointer is set.  (which is
  now done in machdep.c rather than init_main.c.  The Alpha port did it
  this way all along and is much cleaner).
- collect all the magic %cr0 etc register settings into one place and
  have the AP's call that instead of using magic numbers (!!) that keep
  changing over and over again.
- Make it safe to call kthread_create() earlier, including during the
  device probe sequence.  It doesn't need the callback mechanism that
  NetBSD's version uses.
- kthreads created this way are root-less as they exist before the root
  filesystem is mounted.  init(1) is set up so that it aquires the root
  pointers prior to running.  If other kthreads want filesystem acccess
  we can make this code more generic.
- set all threads start times once we have decided what time it is.
- init uses a trampoline rather than the evil prepare_usermode() hack.
- kern_descrip.c has a couple of tweaks to deal with forking when there
  is no rootdir or cwd etc.
- adjust the early SYSINIT() sequence so that a few prereqisites are in
  place. eg: make sure the run queue is initialized before doing forks.

With this, the USB code can easily create a kthread to do the device
tree discovery.  (I have tested it, it works nicely).

There are still some open issues before this is truely useful.
- tsleep() does not like working before the clock is running.  It
  sort-of tries to spin wait, but it can do more useful things now.
- stopping a kthread in kld code at unload time is "interesting" but
  we have a solution for that.

The Alpha code needs no changes for this.  It already uses pretty much the
same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
Brian S. Dean
de8050f9b8 Don't forget to reset the hardware debug registers when a process that
was using them exits.

Don't allow a user process to cause the kernel to take a TRCTRAP on a
user space address.

Reviewed by:	jlemon, sef
Approved by:	jkh
2000-02-20 20:51:23 +00:00
Marcel Moolenaar
204fed67d2 oszsigcode -> szosigcode
Pointed out by: bde
1999-12-04 10:53:39 +00:00
Luoqi Chen
645682fd40 Add a per-signal flag to mark handlers registered with osigaction, so we
can provide the correct context to each signal handler.

Fix broken sigsuspend(): don't use p_oldsigmask as a flag, use SAS_OLDMASK
as we did before the linuxthreads support merge (submitted by bde).

Move ps_sigstk from to p_sigacts to the main proc structure since signal
stack should not be shared among threads.

Move SAS_OLDMASK and SAS_ALTSTACK flags from sigacts::ps_flags to proc::p_flag.
Move PS_NOCLDSTOP and PS_NOCLDWAIT flags from proc::p_flag to procsig::ps_flag.

Reviewed by:	marcel, jdp, bde
1999-10-11 20:33:17 +00:00
Marcel Moolenaar
210430fd8d Simplification of the signal trampoline and other cleanups.
o  Remove unused defines from genassym.c that were needed
   by the trampoline.
o  Add load_gs_param function to support.s that catches
   a fault when %gs is loaded with an invalid descriptor.
   The function returns EFAULT in that case.
o  Remove struct trapframe from mcontext_t and replace it
   with the list of registers.
o  Modify sendsig and sigreturn accordingly.

This commit contains a patch by bde.

Reviewed by: luoqi, jdp
1999-10-07 12:40:34 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Jonathan Lemon
ab001a72be Implement support for hardware debug registers on the i386.
Submitted by:	Brian Dean <brdean@unx.sas.com>
1999-07-09 04:16:00 +00:00
Luoqi Chen
5206bca10a Enable vmspace sharing on SMP. Major changes are,
- %fs register is added to trapframe and saved/restored upon kernel entry/exit.
- Per-cpu pages are no longer mapped at the same virtual address.
- Each cpu now has a separate gdt selector table. A new segment selector
  is added to point to per-cpu pages, per-cpu global variables are now
  accessed through this new selector (%fs). The selectors in gdt table are
  rearranged for cache line optimization.
- fask_vfork is now on as default for both UP and SMP.
- Some aio code cleanup.

Reviewed by:	Alan Cox	<alc@cs.rice.edu>
		John Dyson	<dyson@iquest.net>
		Julian Elischer	<julian@whistel.com>
		Bruce Evans	<bde@zeta.org.au>
		David Greenman	<dg@root.com>
1999-04-28 01:04:33 +00:00
Bruce Evans
68ba369606 Moved declarations related to copying and zeroing to the right place. 1999-01-08 16:29:59 +00:00
Mike Smith
35d27a0f39 Add the ability to specify where on the at_shutdown queue a handler is
installed.

Remove cpu_power_down, and replace it with an entry at the end of the
SHUTDOWN_FINAL queue in the only place it's used (APM).

Submitted by:	Some ideas from Bruce Walter <walter@fortean.com>
1998-10-30 05:41:15 +00:00
Peter Wemm
10baba4b95 Goodbye BOUNCE_BUFFERS, for a hack it has served us well.
The last consumer of this code (the old SCSI system) has left us and
the CAM code does it's own bouncing.  The isa dma system has been
doing it's own bouncing for a while too.

Reviewed by:	core
1998-09-25 17:34:49 +00:00
John Polstra
1a291e0cd4 Add new functions fill_fpregs() and set_fpregs(), like fill_regs()
and set_regs() but for the floating point register state.  The code
is stolen from procfs_machdep.c, and moved out of there into
machdep.c.

These functions are needed for generating ELF core dumps.
1998-09-14 22:43:40 +00:00
Bruce Evans
88bf59fcda Don't pretend to support ix86's with 16-bit ints by using longs just to
ensure 32-bit variables.  Doing so mainly bogotified some printf formats.

Fixed disorder in md_var.h.
1998-07-11 05:59:35 +00:00
Bruce Evans
af3b301b36 Fixed disordering of busdma* and swi_vm. 1998-02-01 23:00:53 +00:00
Justin T. Gibbs
44be5ce870 Add prototypes for swi_vm, setsoftvm, schedsoftvm, and splsoftvm that were
missed when I originally committed the bus dma code.
1998-01-21 18:28:49 +00:00
Justin T. Gibbs
e1a1bba4fa Implementation of Bus Space for FreeBSD-x86.
Obtained From: NetBSD
1998-01-15 07:32:56 +00:00
Bruce Evans
96a73b4063 Moved some extern declarations to header files (unused ones to /dev/null). 1997-11-20 19:30:35 +00:00
Bruce Evans
4090154b9e Moved declaration of etext from <machine/md_var.h> to <machine/cpu.h>
and fixed everything that dependended on it being declared in the old
place.  It is used in "machine-independent" code in subr_prof.c.

Moved declaration of btext from subr_prof.c to <machine/cpu.h>.  It
is machine-dependent.
1997-10-27 17:23:18 +00:00
Joerg Wunsch
cae6f73ac2 Revert the logic behind my last change, and use a function called
`is_physical_memory()' now for the decision whether to dump some
region of memory or not.

Suggested by:	davidg
1997-09-13 16:12:15 +00:00
Joerg Wunsch
e0b78e19f2 Do not ever try to coredump adapter memory regions.
PR:		4486
Submitted by:	tegge@idi.ntnu.no (Tor Egge)

Implement a function is_adapter_memory() in order to determine what
should nto be dumped at all.  Currently, only populated with the ``ISA
memory hole''.  Adapter regions of other busses should be added.
1997-09-10 12:31:40 +00:00
John Dyson
48a09cf276 VM86 kernel support.
Work done by BSDI, Jonathan Lemon <jlemon@americantv.com>,
	Mike Smith <msmith@gsoft.com.au>, Sean Eric Fagan <sef@kithrup.com>,
	and probably alot of others.
Submitted by:	Jnathan Lemon <jlemon@americantv.com>
1997-08-09 00:04:06 +00:00
Garrett Wollman
3f7773458e When APM is configured, turn off the power when halting for good. 1997-06-15 02:03:03 +00:00
Bruce Evans
7b3c84247b Preserve %fs and %gs across context switches. This has a relatively low
cost since it is only done in cpu_switch(), not for every exception.
The extra state is kept in the pcb, and handled much like the npx state,
with similar deficiencies (the state is not preserved across signal
handlers, and error handling loses state).
1997-06-07 04:36:10 +00:00
KATO Takenori
4c024bbdf8 Improved CPU identification and initialization routines. This
supports All Cyrix CPUs, IBM Blue Lightning CPU and NexGen (now AMD)
Nx586 CPU, and initialize special registers of Cyrix CPU and msr of
IBM Blue Lightning CPU.

If revision of Cyrix 6x86 CPU < 2.7, CPU cache is enabled in
write-through mode.  This can be disabled by kernel configuration
options.

Reviewed by:	Bruce Evans <bde@freebsd.org> and
            	Jordan K. Hubbard <jkh@freebsd.org>
1997-03-22 18:54:54 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Julian Elischer
d13d3630fd Further improved version of hadling a HALT when there is no console. 1996-10-31 00:57:28 +00:00
Bruce Evans
a111a7f827 Moved declarations of non-cpu things from <machine/cpufunc.h> to better
places.
1996-07-01 18:12:24 +00:00
Peter Wemm
d66a506616 Mega-commit for Linux emulator update.. This has been stress tested under
netscape-2.0 for Linux running all the Java stuff.  The scrollbars are now
working, at least on my machine. (whew! :-)

I'm uncomfortable with the size of this commit, but it's too
inter-dependant to easily seperate out.

The main changes:

COMPAT_LINUX is *GONE*.  Most of the code has been moved out of the i386
machine dependent section into the linux emulator itself.  The int 0x80
syscall code was almost identical to the lcall 7,0 code and a minor tweak
allows them to both be used with the same C code.  All kernels can now
just modload the lkm and it'll DTRT without having to rebuild the kernel
first.  Like IBCS2, you can statically compile it in with "options LINUX".

A pile of new syscalls implemented, including getdents(), llseek(),
readv(), writev(), msync(), personality().  The Linux-ELF libraries want
to use some of these.

linux_select() now obeys Linux semantics, ie: returns the time remaining
of the timeout value rather than leaving it the original value.

Quite a few bugs removed, including incorrect arguments being used in
syscalls..  eg:  mixups between passing the sigset as an int, vs passing
it as a pointer and doing a copyin(), missing return values, unhandled
cases, SIOC* ioctls, etc.

The build for the code has changed.  i386/conf/files now knows how
to build linux_genassym and generate linux_assym.h on the fly.

Supporting changes elsewhere in the kernel:

The user-mode signal trampoline has moved from the U area to immediately
below the top of the stack (below PS_STRINGS).  This allows the different
binary emulations to have their own signal trampoline code (which gets rid
of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so
that the emulator can provide the exact "struct sigcontext *" argument to
the program's signal handlers.

The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which
have the same values as the re-used SA_DISABLE and SA_ONSTACK which are
intended for sigaction only.  This enables the support of a SA_RESETHAND
flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal
semantics where the signal handler is reset when it's triggered.

makesyscalls.sh no longer appends the struct sysentvec on the end of the
generated init_sysent.c code.  It's a lot saner to have it in a seperate
file rather than trying to update the structure inside the awk script. :-)

At exec time, the dozen bytes or so of signal trampoline code are copied
to the top of the user's stack, rather than obtaining the trampoline code
the old way by getting a clone of the parent's user area.  This allows
Linux and native binaries to freely exec each other without getting
trampolines mixed up.
1996-03-02 19:38:20 +00:00
David Greenman
267173e72d Rewrote cpu_fork so that it doesn't use pmap_activate, and removed
pmap_activate since it's not used anymore. Changed cpu_fork so that
it uses one line of inline assembly rather than calling mvesp() to
get the current stack pointer. Removed mvesp() since it is no longer
being used.
1996-02-04 21:20:53 +00:00
Bruce Evans
dd87702a51 Allocate DMA bounce buffers only when requested by drivers. Only the
fd and wt drivers need bounce buffers, so this normally saves 32K-1K
of kernel memory.

Keep track of which DMA channels are busy.  isa_dmadone() must now be
called when DMA has finished or been aborted.

Panic for unallocated and too-small (required) bounce buffers.

fd.c:
There will be new warnings about isa_dmadone() not being called after
DMA has been aborted.

sound/dmabuf.c:
isa_dmadone() needs more parameters than are available, so temporarily
use a new interface isa_dmadone_nobounce() to avoid having to worry
about panics for fake parameters.  Untested.
1996-01-27 02:33:48 +00:00
Bruce Evans
512fef80a9 Completed function declarations and/or added prototypes. 1995-11-21 12:55:26 +00:00
Julian Elischer
8af5d536ff devfs changes..
changes to allow devices that don't probe (e.g. /dev/mem)
to create devfs entries
this required giving 'configure' its own SYSINIT entry
so we could duck in just before it with a DEVFS init
and some device inits..
my devfs now looks like:
./misc
./misc/speaker
./misc/mem
./misc/kmem
./misc/null
./misc/zero
./misc/io
./misc/console
./misc/pcaudio
./misc/pcaudioctl
./disks
./disks/rfloppy
./disks/rfloppy/fd0.1440
./disks/rfloppy/fd1.1200
./disks/floppy
./disks/floppy/fd0.1440
./disks/floppy/fd1.1200
also some sligt cleanups.. DEVFS needs a lot of work
but I'm getting back to it..
1995-09-03 05:43:50 +00:00