-msoft-float seems to be insufficient for disabling the SPE on powerpcspe.
Force it off with -mno-spe as well. This prevents a crash in ubldr on
powerpcspe.
in gptboot.
When arch-independent geli support was added, a new static 'gdsk' struct
was added, but there was still a static 'dsk' struct, and when you typed
in an alternate disk/partition, the string was parsed into that struct,
which was then never used for anything. Now the string gets parsed into
gdsk.dsk, the struct that's actually used.
X-MFC after: 3 days
As part of the migration away from obsolete binutils we want to retire
GNU as. Most assembly files used on amd64 have a .S extension and are
assembled with Clang's Integrated Assembler (IAS); rename pxetram.s to
.S to use IAS as well.
The generated .text is identical (the entire .o file is not, as Clang
adds debug info.)
PR: 205250, 233094
Sponsored by: The FreeBSD Foundation
As part of the migration away from obsolete binutils we want to retire
GNU as. Most assembly files used on amd64 have a .S extension and are
assembled with Clang's integrated assembler; rename two files in
stand/i386/btx/lib to .S to use IAS as well.
The generated .text is identical (the entire .o files are not, as Clang
adds debug info).
PR: 205250, 233094
Discussed with: imp
Sponsored by: The FreeBSD Foundation
the malloc()/free() as well as having potential of softening the handling
in case error is detected down to a mere warning as compared to hard panic
in free().
Submitted by: tsoome
Differential Revision: https://reviews.freebsd.org/D18299
A user may enable build-id for all builds by adding
LDFLAGS=-Wl,--build-id=sha1 to /etc/make.conf. In this case the build-id
note ends added up to mbr and pmbr's .text, which makes it too large (it
ends up being 532 bytes). To avoid this explicitly turn off build-id for
these components.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15470
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS.
Note that in some cases there are small differences in the generated
output, so CLANG_NO_IAS should be removed only after testing (or after
finding no differences in the output).
PR: 205250, 233094
Sponsored by: The FreeBSD Foundation
The ptable_*read() functions return NULL on read errors (and partition table
closed as an side effect). The ptable_open must check the return value and
act properly.
PR: 232483
Reported by: lev
Reviewed by: lev,cem
Differential Revision: https://reviews.freebsd.org/D17890
The disk access is validated by using partition table definitions, therefore
we have no need for if statements, just set the disk size.
Of course the partition table itself may be incorrect/inconsistent, but if
so, we are in trouble anyhow.
Differential Revision: https://reviews.freebsd.org/D17822
The bd_print/bd_open/bd_strategy need to make sure the device does have
media, before getting into performing IO operations. Some systems can
hung if the device without a media is accessed.
Reported by: yuripv
while probing for drives, use int13 extended info before standard one and
provide workaround for case we are not getting needed information in case
of floppy drive.
In case of INT13 errors, there are (at least) 3 error codes appearing in case
of missin media - 20h, 31h and 80h. Flag the no media and do not print an
error.
Differential Revision: https://reviews.freebsd.org/D17667
The previous iteration of try_include attempted to be 'friendly' and error()
out if we hit an error that wasn't ENOENT. This was semi-OK, but fragile as
it relied on pattern matching the error message.
Move the responsibility for handling failure to the caller. Following
a common lua pattern, we'll return the return value of the underlying
require() on success, or false and an error message.
Reported by: bcran
MFC after: 3 days
If module_blacklist isn't specified, we have an empty blacklist; effectively
the same as if module_blacklist="" were specified in loader.conf(5).
This was reported when switching to a BE that predated the module_blacklist
introduction, but the problem is valid all the same and likely to be tripped
over in other scenarios.
Reported by: bwidawsk
MFC after: 3 days
Pointer math to find the size in bytes only works with char types.
Use correct pointer math to determine if we have enough of a header to
look at or not.
MFC After: 3 days
X-MFX-With: r339800
Noticed by: jhb@
Sponsored by: Netflix, Inc
its length. Some BIOSes pad the length of the device path to an even
amount. When we had a device path that was somehow an odd length, we'd
wind up having 1 byte left that we were bogusly interpreting as a full
device path. We'd then dereference 2 bytes into that to get a length
of the node, which had undefined (and quite undesired) effects.
Sponsored by: Netflix, Inc
MFC After: 3 days
Some fixes:
- Maintain historical behavior more accurately w.r.t verbose_loading;
verbose_loading strictly prints "${module_name...}" and later "failed!"
or "ok" based on load success
- With or without verbose_loading, dump command_errbuf on load failure.
This usually happens prior to ok/failed if we're verbose_loading
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17694
Currently, a timeout in the menu autoboot sequence would effectively do
nothing. We would return from the autoboot handling, then begin processing
the menu without redrawing it.
This change makes the behavior a little more friendly. Returning the user to
the menu can't have any good effects, so abort the autoboot sequence and
drop to the loader prompt.
MFC after: 3 days
In the majority of cases, a kernel is not loaded before we hit the menu.
However, if a password is set, we'll trigger autoboot and have loadelf'd
beforehand. We also need to take into account one dropping to the loader
prompt and twiddling with things manually; if they try to toggle through
kernels, we'll assume they mean it.
Reported by: trasz
MFC after: 3 days
ffs_subr.c requires calculate_crc32c() from libkern. Unfortunately we
cannot just add libkern/crc32.c to libstand because crc32.o is already
compiled from contrib/zlib/crc32.c. Use the include trick to rename
the source.
Note that libstand also provides crc32.c which seems to be unused.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17677
The 4kn support in current bios specific biosdisk.c is broken, as the code
is only implementing the support for the 512B sector size.
This work is building the support for custom size sectors, we still do assume
the requested data to be multiple of 512B blocks and we only do address the
biosdisk.c interface here.
For reference, see also:
https://www.illumos.org/issues/8303https://www.illumos.org/rb/r/547
As the GELI is moved above biosdisk "layer", the GELI should just work
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D11174
In current tftp code we drop out-of-order packets; however, we should play
nice and re-send ACK for older data packets we are receiving. This will
hopefully stop server repeating those packets we already have received.
Note we do not answer duplicates from "previous" session (that is, session
with different port number), those will eventually time out.
Differential Revision: https://reviews.freebsd.org/D17087
without first entering the password stored in loader.conf(5).
PR: kern/207069
Reported by: david@dcrosstech.com
MFC after: 3 days
Sponsored by: Smule, Inc.
Clang's Integrated Assembler was previously disabled for i386 with the
note that it "doesn't grok .codeNN directives yet." This is no longer
the case (and hasn't been for some time), and the assembled output .text
is identical between gas and IAS.
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Add poweroff command to make life a bit easier.
Reviewed by: imp, allanjude
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17535
As documented in loader.conf(5), kernels_autodetect="YES" will cause the
Lua scripts to effectively scan /boot for directories with a "kernel" file
inside, to be listed in the loader menu.
Approved by: re (kib)
For non-UEFI systems, boot.config(5) may have -s or -v specified for
single-user and verbose boot respectively. These were not being properly
taken into account and reflected in the "Boot Options" submenu. When we
initialize core.lua, we'll record boot_single and boot_verbose as we do ACPI
and consider these the system defaults.
Reported by: David Wolfskill <david@catwhisker.org>
Approved by: re (kib)
This is a step in the process of easing migration into the new world order
of DRM drivers. Strongly encourage users towards loading DRM modules via
rc.conf(5) instead of loader.conf(5) by failing the load from loader(8).
Users so inclined may wipe out the blacklist via module_blacklist="" in
loader.conf(5), and it is expected that these modules will eventually be
removed from the blacklist. They may still be loaded as dependencies of
other modules or explicitly via the loader prompt, but this should not be a
major problem.
Approved by: re (rgrimes)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16914
This was mostly a cosmetic issue. autoboot_delay=-1 is documented to bypass
the loader menu and immediately execute the boot command, but lualoader
would draw the menu and immediately execute the boot command. No interaction
was possible with the menu.
The fix lifts autoboot_delay processing out of menu.autoboot, which now
takes a delay and does nothing if no delay is specified. This lines up with
my expectations of menu.autoboot's usage from a third party, which may
want more control over the process than the default behavior.
PR: 231610
Approved by: re (gjb)
1. Be clear about which password is being requested
2. Remove extraneous whitespace between the prompt and the cursor
3. Move the twiddle to where the prompt is, instead of two characters to the right
4. Fix erasing the 'incorrect password' message when retrying; previously it was erased partially
5. Remove the unneeded exclamation mark
Reviewed by: kevans
Approved by: re (gjb)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17236
The name check referred in the comment is not the only possible error source,
we need to validate the result.
Reviewed by: allanjude
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17081
tftpfile is allocated just above and needs to be freed.
Reviewed by: imp
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17058
Reports have come in that there's issue with powerpc and sparc64 since
we've switched to using -Oz / -Os. We don't strictly need them for
!x86, so be conservative about when we enable them.
Approved by: re@ (gjb)
Differential Revision: https://reviews.freebsd.org/D17016
This was disabled recently due to lack of support in KDB disassembler
and DTrace FBT provider. Support for 'C'-extension to both of these was
added, so we can now enable 'C'-extension.
This reduces size of the kernel important for low-end embedded devices,
and saves cache footprint for high perfomance machines.
Approved by: re (kib)
Sponsored by: DARPA, AFRL
/etc/security/audit_event to provide a list of audit event-number <->
name mappings. However, this occurs too late for anonymous tracing.
With this change, adding 'audit_event_load="YES"' to /boot/loader.conf
will cause the boot loader to preload the file, and then the kernel
audit code will parse it to register an initial set of audit event-number
<-> name mappings. Those mappings can later be updated by auditd(8) if
the configuration file changes.
Reviewed by: gnn, asomers, markj, allanjude
Discussed with: jhb
Approved by: re (kib)
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16589
The format for kernels is documented as being space-delimited, but
forthloader was more lenient on this and so people began to depend on it.
A later pass will be made to document all of the fun features that forthloader
allowed that may not be immediately obvious.
Reported by: mmacy
Approved by: re (kib)
The switch to lualoader creates a problem with userboot: the host is
inclined to build userboot with Lua, but the host userboot's interpreter
must match what's available on the guest. For almost all FreeBSD guests in
the wild, Lua is not yet available and a Lua-based userboot will fail.
This revision updates userboot protocol to version 5, which adds a
swap_interpreter callback to request a different interpreter, and tries to
determine the proper interpreter to be used based on how the guest
/boot/loader is compiled. This is still a bit of a guess, but it's likely
the best possible guess we can make in order to get it right. The
interpreter is now embedded in the resulting executable, so we can open
/boot/loader on the guest and hunt that down to derive the interpreter it
was built with.
Using -l with bhyveload will not allow an intepreter swap, even if the
loader specified happens to be a userboot with the wrong interpreter. We'll
simply complain about the mismatch and bail out.
For legacy guests without the interpreter marker, we assume they're 4th.
For new guests with the interpreter marker, we'll read it and swap over
to the proper interpreter if it doesn't match what the userboot we're using
was compiled with.
Both flavors of userboot are installed by default, userboot_4th.so and
userboot_lua.so. This fixes the build WITHOUT_FORTH as a coincidence, which
was broken by userboot being forced to 4th.
Reviewed by: imp, jhb, araujo (earlier version)
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D16945