loopback interface. Nobody have explained me sense of this check.
It breaks connect() system call to a destination address which is
loopback routed (e.g. blackholed).
Reviewed by: silence on net@
MFC after: 2 weeks
connection rates, which is causing problems for some users.
To retain the security advantage of random ports and ensure
correct operation for high connection rate users, disable
port randomization during periods of high connection rates.
Whenever the connection rate exceeds randomcps (10 by default),
randomization will be disabled for randomtime (45 by default)
seconds. These thresholds may be tuned via sysctl.
Many thanks to Igor Sysoev, who proved the necessity of this
change and tested many preliminary versions of the patch.
MFC After: 20 seconds
(sorele()/sotryfree()):
- This permits the caller to acquire the accept mutex before the socket
mutex, avoiding sofree() having to drop the socket mutex and re-order,
which could lead to races permitting more than one thread to enter
sofree() after a socket is ready to be free'd.
- This also covers clearing of the so_pcb weak socket reference from
the protocol to the socket, preventing races in clearing and
evaluation of the reference such that sofree() might be called more
than once on the same socket.
This appears to close a race I was able to easily trigger by repeatedly
opening and resetting TCP connections to a host, in which the
tcp_close() code called as a result of the RST raced with the close()
of the accepted socket in the user process resulting in simultaneous
attempts to de-allocate the same socket. The new locking increases
the overhead for operations that may potentially free the socket, so we
will want to revise the synchronization strategy here as we normalize
the reference counting model for sockets. The use of the accept mutex
in freeing of sockets that are not listen sockets is primarily
motivated by the potential need to remove the socket from the
incomplete connection queue on its parent (listen) socket, so cleaning
up the reference model here may allow us to substantially weaken the
synchronization requirements.
RELENG_5_3 candidate.
MFC after: 3 days
Reviewed by: dwhite
Discussed with: gnn, dwhite, green
Reported by: Marc UBM Bocklet <ubm at u-boot-man dot de>
Reported by: Vlad <marchenko at gmail dot com>
Alice is too lazy to write a server application in PF-independent
manner. Therefore she knocks up the server using PF_INET6 only
and allows the IPv6 socket to accept mapped IPv4 as well. An evil
hacker known on IRC as cheshire_cat has an account in the same
system. He starts a process listening on the same port as used
by Alice's server, but in PF_INET. As a consequence, cheshire_cat
will distract all IPv4 traffic supposed to go to Alice's server.
Such sort of port theft was initially enabled by copying the code that
implemented the RFC 2553 semantics on IPv4/6 sockets (see inet6(4)) for
the implied case of the same owner for both connections. After this
change, the above scenario will be impossible. In the same setting,
the user who attempts to start his server last will get EADDRINUSE.
Of course, using IPv4 mapped to IPv6 leads to security complications
in the first place, but there is no reason to make it even more unsafe.
This change doesn't apply to KAME since it affects a FreeBSD-specific
part of the code. It doesn't modify the out-of-box behaviour of the
TCP/IP stack either as long as mapping IPv4 to IPv6 is off by default.
MFC after: 1 month
somewhat clearer, but more importantly allows for a consistent naming
scheme for suser_cred flags.
The old name is still defined, but will be removed in a few days (unless I
hear any complaints...)
Discussed with: rwatson, scottl
Requested by: jhb
do not pick up the first local ip address for the source
ip address, return ENETUNREACH instead.
Submitted by: Gleb Smirnoff
Reviewed by: -current (silence)
SOCK_LOCK(so):
- Hold socket lock over calls to MAC entry points reading or
manipulating socket labels.
- Assert socket lock in MAC entry point implementations.
- When externalizing the socket label, first make a thread-local
copy while holding the socket lock, then release the socket lock
to externalize to userspace.
reference count:
- Assert SOCK_LOCK(so) macros that directly manipulate so_count:
soref(), sorele().
- Assert SOCK_LOCK(so) in macros/functions that rely on the state of
so_count: sofree(), sotryfree().
- Acquire SOCK_LOCK(so) before calling these functions or macros in
various contexts in the stack, both at the socket and protocol
layers.
- In some cases, perform soisdisconnected() before sotryfree(), as
this could result in frobbing of a non-present socket if
sotryfree() actually frees the socket.
- Note that sofree()/sotryfree() will release the socket lock even if
they don't free the socket.
Submitted by: sam
Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS
unless it's in the closed or listening state (remote address
== INADDR_ANY).
If a TCP inpcb is in any other state, it's impossible to steal
its local port or use it for port theft. And if there are
both closed/listening and connected TCP inpcbs on the same
localIP:port couple, the call to in_pcblookup_local() will
find the former due to the design of that function.
No objections raised in: -net, -arch
MFC after: 1 month
implementation taken directly from OpenBSD.
I've resisted committing this for quite some time because of concern over
TIME_WAIT recycling breakage (sequential allocation ensures that there is a
long time before ports are recycled), but recent testing has shown me that
my fears were unwarranted.
to implement this mistake.
Fixed some nearby style bugs (initialization in declaration, misformatting
of this initialization, missing blank line after the declaration, and
comparision of the non-boolean result of the initialization with 0 using
"!". In KNF, "!" is not even used to compare booleans with 0).
zeroed. Doing a bzero on the entire struct route is not more
expensive than assigning NULL to ro.ro_rt and bzero of ro.ro_dst.
Reviewed by: sam (mentor)
Approved by: re (scottl)
rtalloc_ign() in in_pcbconnect_setup() before it is filled out.
Otherwise, stack junk would be left in sin_zero, which could
cause host routes to be ignored because they failed the comparison
in rn_match().
This should fix the wrong source address selection for connect() to
127.0.0.1, among other things.
Reviewed by: sam
Approved by: re (rwatson)
the routing table. Move all usage and references in the tcp stack
from the routing table metrics to the tcp hostcache.
It caches measured parameters of past tcp sessions to provide better
initial start values for following connections from or to the same
source or destination. Depending on the network parameters to/from
the remote host this can lead to significant speedups for new tcp
connections after the first one because they inherit and shortcut
the learning curve.
tcp_hostcache is designed for multiple concurrent access in SMP
environments with high contention and is hash indexed by remote
ip address.
It removes significant locking requirements from the tcp stack with
regard to the routing table.
Reviewed by: sam (mentor), bms
Reviewed by: -net, -current, core@kame.net (IPv6 parts)
Approved by: re (scottl)
the MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols. This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.
This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.
For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks. Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.
Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.
Reviewed by: sam, bms
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
o correct a read-lock assert in in_pcblookup_local that should be
a write-lock assert (since time wait close cleanups may alter state)
Supported by: FreeBSD Foundation
it is marked as RTF_UP. This appears to fix a crash that was sometimes
triggered when dhclient(8) tried to send a packet after an interface
had been detatched.
Reviewed by: sam
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
we will generate for a given ip/port tuple has advanced far enough
for the time_wait socket in question to be safely recycled.
- Have in_pcblookup_local use tcp_twrecycleable to determine if
time_Wait sockets which are hogging local ports can be safely
freed.
This change preserves proper TIME_WAIT behavior under normal
circumstances while allowing for safe and fast recycling whenever
ephemeral port space is scarce.
routine that takes a locked routing table reference and removes all
references to the entry in the various data structures. This
eliminates instances of recursive locking and also closes races
where the lock on the entry had to be dropped prior to calling
rtrequest(RTM_DELETE). This also cleans up confusion where the
caller held a reference to an entry that might have been reclaimed
(and in some cases used that reference).
Supported by: FreeBSD Foundation
that covers updates to the contents. Note this is separate from holding
a reference and/or locking the routing table itself.
Other/related changes:
o rtredirect loses the final parameter by which an rtentry reference
may be returned; this was never used and added unwarranted complexity
for locking.
o minor style cleanups to routing code (e.g. ansi-fy function decls)
o remove the logic to bump the refcnt on the parent of cloned routes,
we assume the parent will remain as long as the clone; doing this avoids
a circularity in locking during delete
o convert some timeouts to MPSAFE callouts
Notes:
1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level
applications cannot/do-no know about mutex's. Doing this requires
that the mutex be the last element in the structure. A better solution
is to introduce an externalized version of struct rtentry but this is
a major task because of the intertwining of rtentry and other data
structures that are visible to user applications.
2. There are known LOR's that are expected to go away with forthcoming
work to eliminate many held references. If not these will be resolved
prior to release.
3. ATM changes are untested.
Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS (partly)
OSes has probably caused more problems than it ever solved. Allow the
user to retire the old behavior by specifying their own privileged
range with,
net.inet.ip.portrange.reservedhigh default = IPPORT_RESERVED - 1
net.inet.ip.portrange.reservedlo default = 0
Now you can run that webserver without ever needing root at all. Or
just imagine, an ftpd that can really drop privileges, rather than
just set the euid, and still do PORT data transfers from 20/tcp.
Two edge cases to note,
# sysctl net.inet.ip.portrange.reservedhigh=0
Opens all ports to everyone, and,
# sysctl net.inet.ip.portrange.reservedhigh=65535
Locks all network activity to root only (which could actually have
been achieved before with ipfw(8), but is somewhat more
complicated).
For those who stick to the old religion that 0-1023 belong to root and
root alone, don't touch the knobs (or even lock them by raising
securelevel(8)), and nothing changes.
control block. Allow the socket and tcpcb structures to be freed
earlier than inpcb. Update code to understand an inp w/o a socket.
Reviewed by: hsu, silby, jayanth
Sponsored by: DARPA, NAI Labs
you still don't want to use the two together, but it's ok to have
them in the same kernel (the problem that initiated this bandaid
has long since been fixed)
in_pcbconnect() called in_pcbconnect_setup(). This version performs
all of the functions of in_pcbconnect() except for the final
committing of changes to the PCB. In the case of an EADDRINUSE error
it can also provide to the caller the PCB of the duplicate connection,
avoiding an extra in_pcblookup_hash() lookup in tcp_connect().
This change will allow the "temporary connect" hack in udp_output()
to be removed and is part of the preparation for adding the
IP_SENDSRCADDR control message.
Discussed on: -net
Approved by: re
called in_pcbbind_setup() that does everything except commit the
changes to the PCB. There should be no functional change here, but
in_pcbbind_setup() will be used by the soon-to-appear IP_SENDSRCADDR
control message implementation to check or allocate the source
address and port.
Discussed on: -net
Approved by: re
configuration stuff as well as conditional code in the IPv4 and IPv6
areas. Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).
As noted previously, don't use FAST_IPSEC with INET6 at the moment.
Reviewed by: KAME, rwatson
Approved by: silence
Supported by: Vernier Networks
