Commit Graph

63 Commits

Author SHA1 Message Date
Mark Johnston
57f6086735 Implement the ip, tcp, and udp DTrace providers. The probe definitions use
dynamic translation so that their arguments match the definitions for
these providers in Solaris and illumos. Thus, existing scripts for these
providers should work unmodified on FreeBSD.

Tested by:	gnn, hiren
MFC after:	1 month
2013-08-25 21:54:41 +00:00
Andre Oppermann
86bd049144 Add m_clrprotoflags() to clear protocol specific mbuf flags at up and
downwards layer crossings.

Consistently use it within IP, IPv6 and ethernet protocols.

Discussed with:	trociny, glebius
2013-08-19 13:27:32 +00:00
Andrey V. Elsukov
ffdbf9da3b Remove the recently added sysctl variable net.pfil.forward.
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.

Suggested by:	andre
2012-11-02 01:20:55 +00:00
Gleb Smirnoff
078468ede4 o Remove last argument to ip_fragment(), and obtain all needed information
on checksums directly from mbuf flags. This simplifies code.
o Clear CSUM_IP from the mbuf in ip_fragment() if we did checksums in
  hardware. Some driver may not announce CSUM_IP in theur if_hwassist,
  although try to do checksums if CSUM_IP set on mbuf. Example is em(4).
o While here, consistently use CSUM_IP instead of its alias CSUM_DELAY_IP.
  After this change CSUM_DELAY_IP vanishes from the stack.

Submitted by:	Sebastian Kuzminsky <seb lineratesystems.com>
2012-10-26 21:06:33 +00:00
Andrey V. Elsukov
c1de64a495 Remove the IPFIREWALL_FORWARD kernel option and make possible to turn
on the related functionality in the runtime via the sysctl variable
net.pfil.forward. It is turned off by default.

Sponsored by:	Yandex LLC
Discussed with:	net@
MFC after:	2 weeks
2012-10-25 09:39:14 +00:00
Gleb Smirnoff
21d172a3f1 A step in resolving mess with byte ordering for AF_INET. After this change:
- All packets in NETISR_IP queue are in net byte order.
  - ip_input() is entered in net byte order and converts packet
    to host byte order right _after_ processing pfil(9) hooks.
  - ip_output() is entered in host byte order and converts packet
    to net byte order right _before_ processing pfil(9) hooks.
  - ip_fragment() accepts and emits packet in net byte order.
  - ip_forward(), ip_mloopback() use host byte order (untouched actually).
  - ip_fastforward() no longer modifies packet at all (except ip_ttl).
  - Swapping of byte order there and back removed from the following modules:
    pf(4), ipfw(4), enc(4), if_bridge(4).
  - Swapping of byte order added to ipfilter(4), based on __FreeBSD_version
  - __FreeBSD_version bumped.
  - pfil(9) manual page updated.

Reviewed by:	ray, luigi, eri, melifaro
Tested by:	glebius (LE), ray (BE)
2012-10-06 10:02:11 +00:00
Bjoern A. Zeeb
08291968f2 Use correct field to track statistics counting error as bad header length.
This assimilates the code to what ip_input has been doing since r1.1 in
this case.

Submitted by:	Rozhuk Ivan (rozhuk.im gmail.com)
MFC after:	4 days
2010-12-05 01:09:48 +00:00
Dimitry Andric
3e288e6238 After some off-list discussion, revert a number of changes to the
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files.  A better long-term solution is
still being considered.  This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.

Changes reverted:

------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines

Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.

------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines

Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
Dimitry Andric
31c6a0037e Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
2010-11-14 20:38:11 +00:00
Julian Elischer
0b4b0b0fee Virtualize the pfil hooks so that different jails may chose different
packet filters. ALso allows ipfw to be enabled on on ejail and disabled
on another. In 8.0 it's a global setting.

Sitting aroung in tree waiting to commit for: 2 months
MFC after:	2 months
2009-10-11 05:59:43 +00:00
Pawel Jakub Dawidek
360488410f Correct comment. 2009-09-06 07:29:22 +00:00
Robert Watson
530c006014 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
Robert Watson
1e77c1056a Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used.  Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with:	bz, julian
Reviewed by:	bz
Approved by:	re (kensmith, kib)
2009-07-16 21:13:04 +00:00
Robert Watson
eddfbb763d Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
Kip Macy
279aa3d419 Change if_output to take a struct route as its fourth argument in order
to allow passing a cached struct llentry * down to L2

Reviewed by:	rwatson
2009-04-16 20:30:28 +00:00
Robert Watson
86425c62a0 Update stats in struct ipstat using four new macros, IPSTAT_ADD(),
IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly
manipulating the fields across the kernel.  This will make it easier
to change the implementation of these statistics, such as using
per-CPU versions of the data structures.

MFC after:	3 days
2009-04-11 23:35:20 +00:00
Qing Li
6e6b3f7cbc This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
   possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
  the last piece of the puzzle, Kip has also been conducting
  active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
  provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
  me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
Bjoern A. Zeeb
4b79449e2f Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
Marko Zec
44e33a0758 Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions.  As a rule,
initialization at instatiation for such variables should never be
introduced again from now on.  Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact.  In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at:	devsummit Strassburg
Reviewed by:	bz, julian
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-11-19 09:39:34 +00:00
Marko Zec
8b615593fc Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by:	julian, bz, brooks, zec
Reviewed by:	julian, bz, brooks, kris, rwatson, ...
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
Julian Elischer
8b07e49a00 Add code to allow the system to handle multiple routing tables.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)

Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.

From my notes:

-----

  One thing where FreeBSD has been falling behind, and which by chance I
  have some time to work on is "policy based routing", which allows
  different
  packet streams to be routed by more than just the destination address.

  Constraints:
  ------------

  I want to make some form of this available in the 6.x tree
  (and by extension 7.x) , but FreeBSD in general needs it so I might as
  well do it in -current and back port the portions I need.

  One of the ways that this can be done is to have the ability to
  instantiate multiple kernel routing tables (which I will now
  refer to as "Forwarding Information Bases" or "FIBs" for political
  correctness reasons). Which FIB a particular packet uses to make
  the next hop decision can be decided by a number of mechanisms.
  The policies these mechanisms implement are the "Policies" referred
  to in "Policy based routing".

  One of the constraints I have if I try to back port this work to
  6.x is that it must be implemented as a EXTENSION to the existing
  ABIs in 6.x so that third party applications do not need to be
  recompiled in timespan of the branch.

  This first version will not have some of the bells and whistles that
  will come with later versions. It will, for example, be limited to 16
  tables in the first commit.
  Implementation method, Compatible version. (part 1)
  -------------------------------
  For this reason I have implemented a "sufficient subset" of a
  multiple routing table solution in Perforce, and back-ported it
  to 6.x. (also in Perforce though not  always caught up with what I
  have done in -current/P4). The subset allows a number of FIBs
  to be defined at compile time (8 is sufficient for my purposes in 6.x)
  and implements the changes needed to allow IPV4 to use them. I have not
  done the changes for ipv6 simply because I do not need it, and I do not
  have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.

  Other protocol families are left untouched and should there be
  users with proprietary protocol families, they should continue to work
  and be oblivious to the existence of the extra FIBs.

  To understand how this is done, one must know that the current FIB
  code starts everything off with a single dimensional array of
  pointers to FIB head structures (One per protocol family), each of
  which in turn points to the trie of routes available to that family.

  The basic change in the ABI compatible version of the change is to
  extent that array to be a 2 dimensional array, so that
  instead of protocol family X looking at rt_tables[X] for the
  table it needs, it looks at rt_tables[Y][X] when for all
  protocol families except ipv4 Y is always 0.
  Code that is unaware of the change always just sees the first row
  of the table, which of course looks just like the one dimensional
  array that existed before.

  The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
  are all maintained, but refer only to the first row of the array,
  so that existing callers in proprietary protocols can continue to
  do the "right thing".
  Some new entry points are added, for the exclusive use of ipv4 code
  called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
  which have an extra argument which refers the code to the correct row.

  In addition, there are some new entry points (currently called
  rtalloc_fib() and friends) that check the Address family being
  looked up and call either rtalloc() (and friends) if the protocol
  is not IPv4 forcing the action to row 0 or to the appropriate row
  if it IS IPv4 (and that info is available). These are for calling
  from code that is not specific to any particular protocol. The way
  these are implemented would change in the non ABI preserving code
  to be added later.

  One feature of the first version of the code is that for ipv4,
  the interface routes show up automatically on all the FIBs, so
  that no matter what FIB you select you always have the basic
  direct attached hosts available to you. (rtinit() does this
  automatically).

  You CAN delete an interface route from one FIB should you want
  to but by default it's there. ARP information is also available
  in each FIB. It's assumed that the same machine would have the
  same MAC address, regardless of which FIB you are using to get
  to it.

  This brings us as to how the correct FIB is selected for an outgoing
  IPV4 packet.

  Firstly, all packets have a FIB associated with them. if nothing
  has been done to change it, it will be FIB 0. The FIB is changed
  in the following ways.

  Packets fall into one of a number of classes.

  1/ locally generated packets, coming from a socket/PCB.
     Such packets select a FIB from a number associated with the
     socket/PCB. This in turn is inherited from the process,
     but can be changed by a socket option. The process in turn
     inherits it on fork. I have written a utility call setfib
     that acts a bit like nice..

         setfib -3 ping target.example.com # will use fib 3 for ping.

     It is an obvious extension to make it a property of a jail
     but I have not done so. It can be achieved by combining the setfib and
     jail commands.

  2/ packets received on an interface for forwarding.
     By default these packets would use table 0,
     (or possibly a number settable in a sysctl(not yet)).
     but prior to routing the firewall can inspect them (see below).
     (possibly in the future you may be able to associate a FIB
     with packets received on an interface..  An ifconfig arg, but not yet.)

  3/ packets inspected by a packet classifier, which can arbitrarily
     associate a fib with it on a packet by packet basis.
     A fib assigned to a packet by a packet classifier
     (such as ipfw) would over-ride a fib associated by
     a more default source. (such as cases 1 or 2).

  4/ a tcp listen socket associated with a fib will generate
     accept sockets that are associated with that same fib.

  5/ Packets generated in response to some other packet (e.g. reset
     or icmp packets). These should use the FIB associated with the
     packet being reponded to.

  6/ Packets generated during encapsulation.
     gif, tun and other tunnel interfaces will encapsulate using the FIB
     that was in effect withthe proces that set up the tunnel.
     thus setfib 1 ifconfig gif0 [tunnel instructions]
     will set the fib for the tunnel to use to be fib 1.

  Routing messages would be associated with their
  process, and thus select one FIB or another.
  messages from the kernel would be associated with the fib they
  refer to and would only be received by a routing socket associated
  with that fib. (not yet implemented)

  In addition Netstat has been edited to be able to cope with the
  fact that the array is now 2 dimensional. (It looks in system
  memory using libkvm (!)). Old versions of netstat see only the first FIB.

  In addition two sysctls are added to give:
  a) the number of FIBs compiled in (active)
  b) the default FIB of the calling process.

  Early testing experience:
  -------------------------

  Basically our (IronPort's) appliance does this functionality already
  using ipfw fwd but that method has some drawbacks.

  For example,
  It can't fully simulate a routing table because it can't influence the
  socket's choice of local address when a connect() is done.

  Testing during the generating of these changes has been
  remarkably smooth so far. Multiple tables have co-existed
  with no notable side effects, and packets have been routes
  accordingly.

  ipfw has grown 2 new keywords:

  setfib N ip from anay to any
  count ip from any to any fib N

  In pf there seems to be a requirement to be able to give symbolic names to the
  fibs but I do not have that capacity. I am not sure if it is required.

  SCTP has interestingly enough built in support for this, called VRFs
  in Cisco parlance. it will be interesting to see how that handles it
  when it suddenly actually does something.

  Where to next:
  --------------------

  After committing the ABI compatible version and MFCing it, I'd
  like to proceed in a forward direction in -current. this will
  result in some roto-tilling in the routing code.

  Firstly: the current code's idea of having a separate tree per
  protocol family, all of the same format, and pointed to by the
  1 dimensional array is a bit silly. Especially when one considers that
  there is code that makes assumptions about every protocol having the
  same internal structures there. Some protocols don't WANT that
  sort of structure. (for example the whole idea of a netmask is foreign
  to appletalk). This needs to be made opaque to the external code.

  My suggested first change is to add routing method pointers to the
  'domain' structure, along with information pointing the data.
  instead of having an array of pointers to uniform structures,
  there would be an array pointing to the 'domain' structures
  for each protocol address domain (protocol family),
  and the methods this reached would be called. The methods would have
  an argument that gives FIB number, but the protocol would be free
  to ignore it.

  When the ABI can be changed it raises the possibilty of the
  addition of a fib entry into the "struct route". Currently,
  the structure contains the sockaddr of the desination, and the resulting
  fib entry. To make this work fully, one could add a fib number
  so that given an address and a fib, one can find the third element, the
  fib entry.

  Interaction with the ARP layer/ LL layer would need to be
  revisited as well. Qing Li has been working on this already.

  This work was sponsored by Ironport Systems/Cisco

Reviewed by:    several including rwatson, bz and mlair (parts each)
Obtained from:  Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
Mike Silbersack
4b421e2daa Add FBSDID to all files in netinet so that people can more
easily include file version information in bug reports.

Approved by:	re (kensmith)
2007-10-07 20:44:24 +00:00
Bruce M Simpson
27f8eaaf03 In IPv4 fast forwarding path, send ICMP unreachable messages for
routes which have RTF_REJECT set *and* a zero expiry timer.

PR:		kern/109246
MFC after:	10 days
Submitted by:	Ingo Flaschberger
2007-03-18 23:05:20 +00:00
Bruce M Simpson
64e740a352 When fast-forwarding is enabled, do not forward directed IPv4 broadcasts
to locally attached broadcast networks.

Note well: This relies on the layer 2 route cloning behaviour in BSD.

PR:		98799
Tested by:	Dmitry Sergienko
MFC after:	1 week
2007-02-05 00:15:40 +00:00
Bruce M Simpson
d256723b8b In fast forwarding path, defer processing of 169.254.0.0/16
to ip_input(). See RFC 3927 section 2.7.
2007-02-03 06:46:48 +00:00
Julian Elischer
b7522c27d2 Remove the IPFIREWALL_FORWARD_EXTENDED option and make it on by default as it always was
in older versions of FreeBSD. This option is pointless as it is needed in just
about every interesting usage of forward that I have ever seen. It doesn't make
the system any safer and just wastes huge amounts of develper time
when the system doesn't behave as expected when code is moved from
4.x to 6.x It doesn't make
the system any safer and just wastes huge amounts of develper time
when the system doesn't behave as expected when code is moved from
4.x to 6.x  or 7.x
Reviewed by:	glebius
MFC after:	1 week
2006-08-17 00:37:03 +00:00
Gleb Smirnoff
4cbb118526 Merge rev. 1.240 of ip_output.c, so that IPFIREWALL_FORWARD_EXTENDED
kernel option will affect both forwarding methods - classic and fast.
2006-04-18 09:20:16 +00:00
Christian S.J. Peron
604afec496 Somewhat re-factor the read/write locking mechanism associated with the packet
filtering mechanisms to use the new rwlock(9) locking API:

- Drop the variables stored in the phil_head structure which were specific to
  conditions and the home rolled read/write locking mechanism.
- Drop some includes which were used for condition variables
- Drop the inline functions, and convert them to macros. Also, move these
  macros into pfil.h
- Move pfil list locking macros intp phil.h as well
- Rename ph_busy_count to ph_nhooks. This variable will represent the number
  of IN/OUT hooks registered with the pfil head structure
- Define PFIL_HOOKED macro which evaluates to true if there are any
  hooks to be ran by pfil_run_hooks
- In the IP/IP6 stacks, change the ph_busy_count comparison to use the new
  PFIL_HOOKED macro.
- Drop optimization in pfil_run_hooks which checks to see if there are any
  hooks to be ran, and returns if not. This check is already performed by the
  IP stacks when they call:

        if (!PFIL_HOOKED(ph))
                goto skip_hooks;

- Drop in assertion which makes sure that the number of hooks never drops
  below 0 for good measure. This in theory should never happen, and if it
  does than there are problems somewhere
- Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep
- Drop variables which support home rolled read/write locking mechanism from
  the IPFW firewall chain structure.
- Swap out the read/write firewall chain lock internal to use the rwlock(9)
  API instead of our home rolled version
- Convert the inlined functions to macros

Reviewed by:	mlaier, andre, glebius
Thanks to:	jhb for the new locking API
2006-02-02 03:13:16 +00:00
Andre Oppermann
5d691e6da8 Return mbuf pointer or NULL from ip_fastforward() as the mbuf pointer
may have changed by m_pullup() during fastforward processing.

While this is a bug it is actually never triggered in real world
situations and it is not remotely exploitable.

Found by:	Coverity Prevent(tm)
Coverity ID:	CID780
Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-01-18 14:24:39 +00:00
Andre Oppermann
ef39adf007 Consolidate all IP Options handling functions into ip_options.[ch] and
include ip_options.h into all files making use of IP Options functions.

From ip_input.c rev 1.306:
  ip_dooptions(struct mbuf *m, int pass)
  save_rte(m, option, dst)
  ip_srcroute(m0)
  ip_stripoptions(m, mopt)

From ip_output.c rev 1.249:
  ip_insertoptions(m, opt, phlen)
  ip_optcopy(ip, jp)
  ip_pcbopts(struct inpcb *inp, int optname, struct mbuf *m)

No functional changes in this commit.

Discussed with:	rwatson
Sponsored by:	TCP/IP Optimization Fundraise 2005
2005-11-18 20:12:40 +00:00
Andre Oppermann
fe53256dc2 Use monotonic 'time_uptime' instead of 'time_second' as timebase
for rt->rt_rmx.rmx_expire.
2005-09-19 22:54:55 +00:00
Andre Oppermann
d56ea155bd Handle pure layer 2 broad- and multicasts properly and simplify related
checks.

PR:		kern/85052
Submitted by:	Dmitrij Tejblum <tejblum at yandex-team.ru>
MFC after:	3 days
2005-08-22 12:06:26 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Giorgos Keramidas
a09ad79379 Misc spelling and/or English fixes in comments.
Reviewed by:	glebius, andre
2005-07-23 00:59:13 +00:00
Andre Oppermann
c773494edd Pass icmp_error() the MTU argument directly instead of
an interface pointer.  This simplifies a couple of uses
and removes some XXX workarounds.
2005-05-04 13:09:19 +00:00
Gleb Smirnoff
d1a4742962 - Don't free mbuf, passed to interface output method if the latter
returns error. In this case mbuf has already been freed. [1]
- Remove redundant declaration.

PR:		kern/78893 [1]
Submitted by:	Liang Yi [1]
Reviewed by:	sam
MFC after:	1 day
2005-03-29 13:43:09 +00:00
Warner Losh
c398230b64 /* -> /*- for license, minor formatting changes 2005-01-07 01:45:51 +00:00
Andre Oppermann
5e7b233055 Fix a double-free in the 'hlen > m->m_len' sanity check.
Bug report by:	<james@towardex.com>
MFC after:	2 weeks
2004-11-09 09:40:32 +00:00
Andre Oppermann
e9a4cd2426 Fix a double-free in the 'm->m_len < sizeof (struct ip)' sanity check.
Bug report by:	<james@towardex.com>
MFC after:	2 weeks
2004-11-06 10:47:36 +00:00
Bruce M Simpson
38f061057b When performing IP fast forwarding, immediately drop traffic which is
destined for a blackhole route.

This also means that blackhole routes do not need to be bound to lo(4)
or disc(4) interfaces for the net.inet.ip.fastforwarding=1 case.

Submitted by:	james at towardex dot com
Sponsored by:	eXtensible Open Router Project <URL:http://www.xorp.org/>
MFC after:	3 weeks
2004-11-04 02:14:38 +00:00
Andre Oppermann
de1c2ac4bf Make comments more clear. Change the order of one if() statement to check the
more likely variable first.
2004-10-19 14:31:56 +00:00
Max Laier
d6a8d58875 Add an additional struct inpcb * argument to pfil(9) in order to enable
passing along socket information. This is required to work around a LOR with
the socket code which results in an easy reproducible hard lockup with
debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do
so later. The missing piece is to turn the filter locking into a leaf lock
and will follow in a seperate (later) commit.

This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in
forseeable future.

Suggested by:		rwatson
A lot of work by:	csjp (he'd be even more helpful w/o mentor-reviews ;)
Reviewed by:		rwatson, csjp
Tested by:		-pf, -ipfw, LINT, csjp and myself
MFC after:		3 days

LOR IDs:		14 - 17 (not fixed yet)
2004-09-29 04:54:33 +00:00
Andre Oppermann
eedc0a7535 Fix ip_input() fallback for the destination modified cases (from the packet
filters).  After the ipfw to pfil move ip_input() expects M_FASTFWD_OURS
tagged packets to have ip_len and ip_off in host byte order instead of
network byte order.

PR:		kern/71652
Submitted by:	mlaier (patch)
2004-09-13 17:01:53 +00:00
Andre Oppermann
319c4c256a Remove a junk line left over from the recent IPFW to PFIL_HOOKS conversion. 2004-08-27 15:32:28 +00:00
Andre Oppermann
c21fd23260 Always compile PFIL_HOOKS into the kernel and remove the associated kernel
compile option.  All FreeBSD packet filters now use the PFIL_HOOKS API and
thus it becomes a standard part of the network stack.

If no hooks are connected the entire packet filter hooks section and related
activities are jumped over.  This removes any performance impact if no hooks
are active.

Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
Andre Oppermann
9b932e9e04 Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland
and preserves the ipfw ABI.  The ipfw core packet inspection and filtering
functions have not been changed, only how ipfw is invoked is different.

However there are many changes how ipfw is and its add-on's are handled:

 In general ipfw is now called through the PFIL_HOOKS and most associated
 magic, that was in ip_input() or ip_output() previously, is now done in
 ipfw_check_[in|out]() in the ipfw PFIL handler.

 IPDIVERT is entirely handled within the ipfw PFIL handlers.  A packet to
 be diverted is checked if it is fragmented, if yes, ip_reass() gets in for
 reassembly.  If not, or all fragments arrived and the packet is complete,
 divert_packet is called directly.  For 'tee' no reassembly attempt is made
 and a copy of the packet is sent to the divert socket unmodified.  The
 original packet continues its way through ip_input/output().

 ipfw 'forward' is done via m_tag's.  The ipfw PFIL handlers tag the packet
 with the new destination sockaddr_in.  A check if the new destination is a
 local IP address is made and the m_flags are set appropriately.  ip_input()
 and ip_output() have some more work to do here.  For ip_input() the m_flags
 are checked and a packet for us is directly sent to the 'ours' section for
 further processing.  Destination changes on the input path are only tagged
 and the 'srcrt' flag to ip_forward() is set to disable destination checks
 and ICMP replies at this stage.  The tag is going to be handled on output.
 ip_output() again checks for m_flags and the 'ours' tag.  If found, the
 packet will be dropped back to the IP netisr where it is going to be picked
 up by ip_input() again and the directly sent to the 'ours' section.  When
 only the destination changes, the route's 'dst' is overwritten with the
 new destination from the forward m_tag.  Then it jumps back at the route
 lookup again and skips the firewall check because it has been marked with
 M_SKIP_FIREWALL.  ipfw 'forward' has to be compiled into the kernel with
 'option IPFIREWALL_FORWARD' to enable it.

 DUMMYNET is entirely handled within the ipfw PFIL handlers.  A packet for
 a dummynet pipe or queue is directly sent to dummynet_io().  Dummynet will
 then inject it back into ip_input/ip_output() after it has served its time.
 Dummynet packets are tagged and will continue from the next rule when they
 hit the ipfw PFIL handlers again after re-injection.

 BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as
 they did before.  Later this will be changed to dedicated ETHER PFIL_HOOKS.

More detailed changes to the code:

 conf/files
	Add netinet/ip_fw_pfil.c.

 conf/options
	Add IPFIREWALL_FORWARD option.

 modules/ipfw/Makefile
	Add ip_fw_pfil.c.

 net/bridge.c
	Disable PFIL_HOOKS if ipfw for bridging is active.  Bridging ipfw
	is still directly invoked to handle layer2 headers and packets would
	get a double ipfw when run through PFIL_HOOKS as well.

 netinet/ip_divert.c
	Removed divert_clone() function.  It is no longer used.

 netinet/ip_dummynet.[ch]
	Neither the route 'ro' nor the destination 'dst' need to be stored
	while in dummynet transit.  Structure members and associated macros
	are removed.

 netinet/ip_fastfwd.c
	Removed all direct ipfw handling code and replace it with the new
	'ipfw forward' handling code.

 netinet/ip_fw.h
	Removed 'ro' and 'dst' from struct ip_fw_args.

 netinet/ip_fw2.c
	(Re)moved some global variables and the module handling.

 netinet/ip_fw_pfil.c
	New file containing the ipfw PFIL handlers and module initialization.

 netinet/ip_input.c
	Removed all direct ipfw handling code and replace it with the new
	'ipfw forward' handling code.  ip_forward() does not longer require
	the 'next_hop' struct sockaddr_in argument.  Disable early checks
	if 'srcrt' is set.

 netinet/ip_output.c
	Removed all direct ipfw handling code and replace it with the new
	'ipfw forward' handling code.

 netinet/ip_var.h
	Add ip_reass() as general function.  (Used from ipfw PFIL handlers
	for IPDIVERT.)

 netinet/raw_ip.c
	Directly check if ipfw and dummynet control pointers are active.

 netinet/tcp_input.c
	Rework the 'ipfw forward' to local code to work with the new way of
	forward tags.

 netinet/tcp_sack.c
	Remove include 'opt_ipfw.h' which is not needed here.

 sys/mbuf.h
	Remove m_claim_next() macro which was exclusively for ipfw 'forward'
	and is no longer needed.

Approved by:	re (scottl)
2004-08-17 22:05:54 +00:00
Andre Oppermann
67d0b24ed1 Make use of in_localip() function and replace previous direct LIST_FOREACH
loops over INADDR_HASH.
2004-08-11 12:32:10 +00:00
Andre Oppermann
767981878c Only check for local broadcast addresses if the mbuf is flagged with M_BCAST. 2004-08-11 10:49:56 +00:00
Andre Oppermann
de2e5d1e20 Make IP fastforwarding ALTQ-aware by adding the input traffic conditioner
check and disabling the early output interface queue length check.
2004-08-11 10:42:59 +00:00