This adds support for the Cortex-A76 and Neoverse-N1 PMU counters to pmc.
While here add more PMCR_IDCODE values and check the implementers code is
correct before setting the PMU type.
Reviewed by: bz, emaste (looks reasonable to me)
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25959
While here change type of some variables from long to int, it's sufficient.
Also, add length reporting to a couple of debug printfs.
MFC after: 3 weeks
In NECx the leading mark has length of 8T as opposed to 16T in NEC,
where T is 562.5 us. So, 4.5 ms.
Our threshold was set to 128 * 42.7 us (derived from the sampling
frequency of 3/128 MHz). So, ~5.5 ms.
The new threshold is set to AW_IR_L1_MIN. I think that's a good enough
lower bound for detecting the leading pulse.
Also, calculations of active_delay (which is activation delay) are fixed.
Previously they would be wrong if AW_IR_ACTIVE_T was anything but zero,
because the value was already bit-shifted.
Finally, I am not sure why the activation delay was divided by two when
calculating the initial pulse length. I have not found anything that
would explain or justify it. So, I removed that division.
MFC after: 3 weeks
Only linux,code is supported as it maps 1:1 to evdev key codes.
No reverse mapping for freebsd,code yet.
Reviewed by: wulf
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D25940
- hoist all request / response structures from function level to top level
- replace magic numeric literals with constants
- regroup types, data and functions
- remove setting of the id field in responses as they are completely
overwritten with data from the device
- centralize setting of the id field as it is always set to the value of
request type
- fix setting and querying of open-drain vs push-pull configuration of
an output pin -- it's always in one of those configurations
- detect special pin configurations: a pin in a special configuration is
neither general purpose input or output
- there is still no support for setting special configurations
MFC after: 2 weeks
r363001 added support for ext_pgs mbufs to nfsm_uiombuf().
By inspection, I noticed that "mlen" was not set non-zero and, as such, there
would be an iteration of the loop that did nothing.
This patch sets it.
This bug would have no effect on the system, since the ext_pgs mbuf code
is not yet enabled.
The conversion was largely mechanical: sed(1) with:
-e 's|mtx_assert(&devmtx, MA_OWNED)|dev_lock_assert_locked()|g'
-e 's|mtx_assert(&devmtx, MA_NOTOWNED)|dev_lock_assert_unlocked()|g'
The definitions of these abstractions in fs/devfs/devfs_int.h are the
only non-mechanical change.
No functional change.
are encountered at boot time:
rcorder: requirement `ipfs' in file `/etc/rc.d/netif' has no providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/netif' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/netwait' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/net_watchdog' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/securelevel' has no
providers.
Listing its own requrements in BEFORE rather than use REQUIRE of
non-optional scripts resolves this issue.
The issue was discovered and patched by glebius at Netflix.
Submitted by: glebius
Reported by: glebius
MFC after: 1 week
- a couple of descriptions are incomplete
- synopsis doesn't show that all arguments are optional
- missing an ENVIRONMENT section with TERM mentioned
PR: 84670
Submitted by: Gary W. Swearingen <garys at opusnet dot com>
Reviewed by: bcr
Approved by: bcr
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26009
The variable is defined unconditionally; declare it unconditionally as well.
It is already initialized to the correct value (1) for !SMP builds.
No functional change.
In very high throughput workloads, the inactive scan can become overwhelmed
as you have many cores producing pages and a single core freeing. Since
Mark's introduction of batched pagequeue operations, we can now run multiple
inactive threads working on independent batches.
To avoid confusing the pid and other control algorithms, I (Jeff) do this in
a mpi-like fan out and collect model that is driven from the primary page
daemon. It decides whether the shortfall can be overcome with a single
thread and if not dispatches multiple threads and waits for their results.
The heuristic is based on timing the pageout activity and averaging a
pages-per-second variable which is exponentially decayed. This is visible in
sysctl and may be interesting for other purposes.
I (Jeff) have verified that this does indeed double our paging throughput
when used with two threads. With four we tend to run into other contention
problems. For now I would like to commit this infrastructure with only a
single thread enabled.
The number of worker threads per domain can be controlled with the
'vm.pageout_threads_per_domain' tunable.
Submitted by: jeff (earlier version)
Discussed with: markj
Tested by: pho
Sponsored by: probably Netflix (based on contemporary commits)
Differential Revision: https://reviews.freebsd.org/D21629
When zsh runs in POSIX sh mode it does not support the -e flag to echo.
Use printf instead of echo to avoid the "-e" characters being printed.
Obtained from: CheriBSD
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D26026
Some of the scripts used for libdtrace invoke nawk instead of awk
(for example cddl/contrib/opensolaris/lib/libdtrace/common/mknames.sh).
When bootstrapping all tools, we get the nawk -> awk link while building
usr.bin/awk, but when linking/copying the dependencies from the host we
were only adding awk but not nawk.
This was silently generating invalid files when building libdtrace with
BUILD_WITH_STRICT_TMPPATH=1 since those scripts invoke nawk instead of
awk. In addition to adding the missing link this commit also adds
set -e to those scripts to catch errors like this in the future.
Reviewed By: markj, emaste
Differential Revision: https://reviews.freebsd.org/D26025
These tools require a bootstrap llvm-tblgen/clang-tblgen and that cannot
be built with the current make infrastructure: the config header is not
correct for Linux/macOS and we don't include the CMakeLists.txt in contrib
so we can't generate one that would be correct.
Reviewed By: emaste, imp, dim
Differential Revision: https://reviews.freebsd.org/D14245
Since the make variable STRIP is already used for other purposes, this
uses STRIPBIN (which is also used for the same purpose by install(1).
This allows using LLVM objcopy to strip binaries instead of the in-tree
elftoolchain objcopy. We make use of this in CheriBSD since passing
binaries generated by our toolchain to elftoolchain strip sometimes results
in assertion failures.
This allows working around https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=248516
by specifying STRIPBIN=/path/to/llvm-strip
Obtained from: CheriBSD
Reviewed By: emaste, brooks
Differential Revision: https://reviews.freebsd.org/D25988
"df", "rf" and "offset". This allows to match on specific
bits of ip_off field.
For compatibility reasons lack of keyword means "offset".
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D26021
This removes a lot of special casing from the VFS layer.
Reviewed by: kib (previous version)
Tested by: pho (previous version)
Differential Revision: https://reviews.freebsd.org/D25612
- Instead of using isatty() to decide whether to call tcgetattr(), just
call tcgetattr() directly, since that's all that isatty() does anyway.
- Simplify error handling in termset(). Check for errno != ENOTTY from
tcgetattr() to handle errors that may be raised while running
script(1) under a debugger.
PR: 248377
Submitted by: Soumendra Ganguly <soumendraganguly@gmail.com>
MFC after: 1 week
LinuxKPI after r359727. This fixes a minor regression issue. Else the
priority tracking won't work properly when both sleepable and
non-sleepable RCU is in use on the same thread.
Bump the __FreeBSD_version to force recompilation of external kernel
modules.
PR: 242272
MFC after: 1 week
Sponsored by: Mellanox Technologies
namei de facto expects that the naimeidata object is properly initialized,
but at the same time it mixes consumer-passable and internal flags, while
tolerating this part by explicitly clearing some of them.
Tighten the interface instead.
While here renumber the flags and denote the gap between the 2 variants.
Try to piggy back th renumber on the just bumped __FreeBSD_version.
Thanks to r364064, the name cache now returns a hit where previously it
would miss. Adjust the expectations accordingly.
PR: 248583
Reported by: lwhsu
MFC with: r364064
For NFSv4.0, the server creates a server->client TCP connection for callbacks.
If the client mount on the server is using TLS, enable TLS for this callback
TCP connection.
TLS connections from clients will not be supported until the kernel RPC
changes are committed.
Since this changes the internal ABI between the NFS kernel modules that
will require a version bump, delete newnfs_trimtrailing(), which is no
longer used.
Since LCL_TLSCB is not yet set, these changes should not have any semantic
affect at this time.
Apparently it was not exported, because scandir_b.c was not included
into libc SRCS. Export it with the CURRENT-13 version.
Also, because it was not exported before ino64, clean up
scandir-compat11.c.
PR: 248572
Reported by: Alex S <iwtcex@gmail.com>
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26020
The global "bucketdisable" flag indicates that we are in a low memory
situation and should avoid allocating buckets. However, in the
allocation path we were checking it before the full bucket cache and
bailing even if the cache is non-empty. Defer the check so that we have
a shot at allocating from the cache.
This came up because M_NOWAIT allocations from the buf trie node zone
must always succeed. In one scenario, all of the preallocated trie
nodes were in the bucket list, and a new slab allocation could not
succeed due to a memory shortage. The short-circuiting caused an
allocation failure which triggered a panic.
Reported by: pho
Reviewed by: cem
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25980
* Let the accepted TCP/IPv4 socket inherit the configured TTL and
TOS value.
* Let the accepted TCP/IPv6 socket inherit the configured Hop Limit.
* Use the configured Hop Limit and Traffic Class when sending
IPv6 packets.
Reviewed by: rrs, lutz_donnerhacke.de
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D25909
- Do not rely on U-Boot for clocks configuration, enable and set frequencies
in the driver's attach method.
- Adjust MAC settings according to detected linespeed on RK3399 and RK3328.
- Add support for RMII PHY mode on RK3328.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D26006
