for export structure and pass that to vfs_export().
Currently in userland mount(8), an export structure is unconditionally
passed in, only for UFS. This is an attempt to move that UFS-specific
behavior out of mount(8) and into the UFS filesystem code.
callpath via vfs_getopt(), and set the appropriate MNT_* flag:
-> acls, async, force, multilabel, noasync, noatime,
-> noclusterr, noclusterw, snapshot, update
- Allow errmsg as a valid mount option via vfs_getopt(),
so we can later add a hook to propagate mount errors back
to userspace via vfs_mount_error().
to (max block - 1) * bsize. For DEV_BSIZE, this doubles the limit from
0.5 TB to 1 TB. For the old 4.4 FFS case, decrease the limit from 0.5 TB
to 2 GB - 1. Older systems had a 32 bit off_t so they couldn't access the
larger files anyway.
Collaboration with: bde
updated by a process holding the snapshot lock. Another process updating a
different inode in the same inodeblock will do copy on write checks and lock in
the opposite direction.
The snapshot code force a copy on write of these blocks manually (cf. start of
expunge_ufs[12]) and these inode blocks are later put on snapblklist.
This partial fix is to 'drain' the relevant ffs_copyonwrite() operation after
installing new snapblklist. This is not a 100% solution since a failed block
allocation can cause implicit fsync() which might deadlock before the new
snapblklist has been installed.
file is flushed by a process not holding snaplk (e.g. bufdaemon). Another
process might hold snaplk and try to access the block due to ffs_copyonwrite
processing.
the cg map buffer being held when writing indirect blocks. The process ends up
in ffs_copyonwrite(), attempting to get snaplk while holding the cg map buffer
lock.
Another process might be in ffs_copyonwrite(), trying to allocate a new block
for a copy. It would hold snaplk while trying to get the cg map buffer lock.
Release the cg map buffer early and use the copy for most of the cgaccount
processing to avoid this deadlock.
skipping the call from ffs_snapremove() if the block number is zero.
Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using
the same locking protocol for low block numbers as for larger block numbers.
This removes a lock leak that could happen if vn_lock() succeeded after
lockmgr() failed in ffs_snapblkfree().
Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
reclamation. If the vnode previously was a fifo then v_op would point to
ffs_fifoops[12] instead of the expected ffs_vnodeops[12], causing a panic at
the end of ffsext_strategy.
stale flag bits left over from before the inode was recycled.
Without this change, a leftover IN_SPACECOUNTED flag could prevent
softdep_freefile() and softdep_releasefile() from incrementing
fs_pendinginodes. Because handle_workitem_freefile() unconditionally
decrements fs_pendinginodes, a negative value could be reported at
file system unmount time with a message like:
unmount pending error: blocks 0 files -3
The pending block count in fs_pendingblocks could also be negative
for similar reasons. These errors can cause the data returned by
statfs() to be slightly incorrect. Some other cleanup code in
softdep_releasefile() could also be incorrectly bypassed.
MFC after: 3 days
Add a new private thread flag to indicate that the thread should
not sleep if runningbufspace is too large.
Set this flag on the bufdaemon and syncer threads so that they skip
the waitrunningbufspace() call in bufwrite() rather than than
checking the proc pointer vs. the known proc pointers for these two
threads. A way of preventing these threads from being starved for
I/O but still placing limits on their outstanding I/O would be
desirable.
Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from
blocking on the runningbufspace check while holding snaplk. This
prevents snaplk from being held for an arbitrarily long period of
time if runningbufspace is high and greatly reduces the contention
for snaplk. The disadvantage is that ffs_copyonwrite() can start
a large amount of I/O if there are a large number of snapshots,
which could cause a deadlock in other parts of the code.
Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace
before attempting to grab snaplk so that I/O requests waiting on
snaplk are not counted in runningbufspace as being in-progress.
Increment runningbufspace again before actually launching the
original I/O request.
Prior to the above two changes, the system could deadlock if enough
I/O requests were blocked by snaplk to prevent runningbufspace from
falling below lorunningspace and one of the bawrite() calls in
ffs_copyonwrite() blocked in waitrunningbufspace() while holding
snaplk.
See <http://www.holm.cc/stress/log/cons143.html>
the directory's inode after queuing the dirrem that will decrement
the parent directory's link count. This will force the update of
the parent directory's actual link to actually be scheduled. Without
this change the parent directory's actual link count would not be
updated until ufs_inactive() cleared the inode of the newly removed
directory, which might be deferred indefinitely. ufs_inactive()
will not be called as long as any process holds a reference to the
removed directory, and ufs_inactive() will not clear the inode if
the link count is non-zero, which could be the result of an earlier
system crash.
If a background fsck is run before the update of the parent directory's
actual link count has been performed, or at least scheduled by
putting the dirrem on the leaf directory's inodedep id_bufwait list,
fsck will corrupt the file system by decrementing the parent
directory's effective link count, which was previously correct
because it already took the removal of the leaf directory into
account, and setting the actual link count to the same value as the
effective link count after the dangling, removed, leaf directory
has been removed. This happens because fsck acts based on the
actual link count, which will be too high when fsck creates the
file system snapshot that it references.
This change has the fortunate side effect of more quickly cleaning
up the large number dirrem structures that linger for an extended
time after the removal of a large directory tree. It also fixes a
potential problem with the shutdown of the syncer thread timing out
if the system is rebooted immediately after removing a large directory
tree.
Submitted by: tegge
MFC after: 3 days
osf1_signal.c:1.41, amd64/amd64/trap.c:1.291, linux_socket.c:1.60,
svr4_fcntl.c:1.36, svr4_ioctl.c:1.23, svr4_ipc.c:1.18, svr4_misc.c:1.81,
svr4_signal.c:1.34, svr4_stat.c:1.21, svr4_stream.c:1.55,
svr4_termios.c:1.13, svr4_ttold.c:1.15, svr4_util.h:1.10,
ext2_alloc.c:1.43, i386/i386/trap.c:1.279, vm86.c:1.58,
unaligned.c:1.12, imgact_elf.c:1.164, ffs_alloc.c:1.133:
Now that Giant is acquired in uprintf() and tprintf(), the caller no
longer leads to acquire Giant unless it also holds another mutex that
would generate a lock order reversal when calling into these functions.
Specifically not backed out is the acquisition of Giant in nfs_socket.c
and rpcclnt.c, where local mutexes are held and would otherwise violate
the lock order with Giant.
This aligns this code more with the eventual locking of ttys.
Suggested by: bde
as they both interact with the tty code (!MPSAFE) and may sleep if the
tty buffer is full (per comment).
Modify all consumers of uprintf() and tprintf() to hold Giant around
calls into these functions. In most cases, this means adding an
acquisition of Giant immediately around the function. In some cases
(nfs_timer()), it means acquiring Giant higher up in the callout.
With these changes, UFS no longer panics on SMP when either blocks are
exhausted or inodes are exhausted under load due to races in the tty
code when running without Giant.
NB: Some reduction in calls to uprintf() in the svr4 code is probably
desirable.
NB: In the case of nfs_timer(), calling uprintf() while holding a mutex,
or even in a callout at all, is a bad idea, and will generate warnings
and potential upset. This needs to be fixed, but was a problem before
this change.
NB: uprintf()/tprintf() sleeping is generally a bad ideas, as is having
non-MPSAFE tty code.
MFC after: 1 week
Don't free a struct inodedep if another process is allocating saved inode
memory for the same struct inodedep in initiate_write_inodeblock_ufs[12]().
Handle disappearing dependencies in softdep_disk_io_initiation().
Reviewed by: mckusick
make the b_iodone callback responsible for setting it if it is needed.
Previously, it was set unconditionally by bufdone() without holding
whichever lock is shared by the b_iodone callback and the corresponding
top-half function. Consequently, in a race, the top-half function could
conclude that operation was done before the b_iodone callback finished.
See, for example, aio_physwakeup() and aio_fphysio().
Note: I don't believe that the other, more widely-used b_iodone callbacks
are affected.
Discussed with: jeff
Reviewed by: phk
MFC after: 2 weeks
UFS by:
- Making the pre and post hooks for the VOP functions work even when
DEBUG_VFS_LOCKS is not defined.
- Moving the KNOTE activations into the corresponding VOP hooks.
- Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct
mount that permits filesystems to disable the new behavior.
- Creating a default VOP_KQFILTER function: vfs_kqfilter()
My benchmarks have not revealed any performance degradation.
Reviewed by: jeff, bde
Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
are subtle differences in the read and write completion path. Instead,
grab an extra write ref so the write path can drop it when we recursively
call bufdone(). I believe this may be the source of the wrong bufobj
panics.
Reported by: pho, kkenn
export. This was happening anyway since this file manually sets DEBUG.
- Add a sysctl for the number of items on the worklist.
- Use a more canonical loop restart in softdep_fsync_mountdev, it saves
some code at the expense of a goto and makes me worry less about
modifying a variable that should be private to the TAILQ_FOREACH_SAFE
macro.
- Don't intermingle direct calls to lockmgr and indirect calls through
VOPs. This will be important in the future.
- Dont lock the devvp's interlock just to release it on the next line by
passing LK_INTERLOCK to lockmgr.
- Restructure ffs_snapshot_unmount so we don't call free() with the
devvp's interlock locked.
because it may change identities while we're sleeping on the lock.
Otherwise we may bail out of ffs_sync() early due to an error from
deadfs.
- Collapse a VOP_UNLOCK, vrele into a single vput().
two bugs.
- ffs_disk_prewrite was pulling the vp from the buf and checking for
COPYONWRITE, when really it wanted the vp from the bufobj that we're
writing to, which is the devvp. This lead to us skipping the copy on
write to all file data, which significantly broke snapshots for the
last few months.
- When the SOFTUPDATES option was not included in the kernel config we
would also skip the copy on write check, which would effectively disable
snapshots.
- Remove an invalid mp_fixme().
Debugging tips from: mckusick
Reported by: iedowse, others
Discussed with: phk
add more work are forced to process two worklist items first.
However, processing an item may generate additional work, causing the
unlucky thread to recursively process the worklist. Add a per-thread
flag to detect this situation and avoid the recursion. This should
fix the stack overflows that could occur while removing large
directory trees.
Tested by: kris
Reviewed by: mckusick
the filesystem. Check that rather than VI_XLOCK.
- Shorten ffs_reload by one step. The old check for an inactive vnode
was slightly racey, and the code which deals with still active vnodes
is not much more expensive.
Sponsored by: Isilon Systems, Inc.
very slow process, especially for large file systems that is just
recovered from a crash.
Since the summary is already re-sync'ed every 30 second, we will
not lag behind too much after a crash. With this consideration
in mind, it is more reasonable to transfer the responsibility to
background fsck, to reduce the delay after a crash.
Add a new sysctl variable, vfs.ffs.compute_summary_at_mount, to
control this behavior. When set to nonzero, we will get the
"old" behavior, that the summary is computed immediately at mount
time.
Add five new sysctl variables to adjust ndir, nbfree, nifree,
nffree and numclusters respectively. Teach fsck_ffs about these
API, however, intentionally not to check the existence, since
kernels without these sysctls must have recomputed the summary
and hence no adjustments are necessary.
This change has eliminated the usual tens of minutes of delay of
mounting large dirty volumes.
Reviewed by: mckusick
MFC After: 1 week
patch from kan@).
Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on
close. This is not yet a generally safe function, but for this very
specific use it is safe. This solves the problem with buffers not
being flushed by unmount or after failed mount attempts.
invalidate pending io and dependencies. However, vinvalbuf() rightfully
does not call vnode_pager_setsize() for us. We must do this here. This
could potentially have caused numerous kinds of bugs, but it was
specifically causing msync() deadlocks because msync() was writing
flushing pages that should not have been valid.
Sponsored by: Isilon Systems, Inc.
Reported by: kkenn
Give FFS vnodes a specific bufwrite method which contains all the
background write stuff and then calls into the default bufwrite()
for the rest of the job.
Remove all the background write related stuff from the normal bufwrite.
This drags the softdep_move_dependencies() back into FFS.
Long term, it is worth looking at simply copying the data into
allocated memory and issuing the bio directly and not create the
"shadow buf" in the first place (just like copy-on-write is done
in snapshots for instance). I don't think we really gain anything
but complexity from doing this with a buf.
The "business class upgrade" was implemented in UFS's VOP_LOCK
implementation ufs_lock() which is the wrong layer, so move it to
ffs_lock().
Also, as long as we have not abandonned advanced vfs-stacking we
should not preclude it from happening: instead of implementing a
copy locally, use the VOP_LOCK_APV(&ufs) to correctly arrive at
vop_stdlock() at the bottom.
The "business class upgrade" was implemented in UFS's VOP_LOCK
implementation ufs_lock() which is the wrong layer, so move it to
ffs_lock().
Also, as long as we have not abandonned advanced vfs-stacking we
should not preclude it from happening: instead of implementing a
copy locally, use the VOP_LOCK_APV(&ufs) to correctly arrive at
vop_stdlock() at the bottom.
- Expand the scope of lk to cover not only interrupt races, but also
top-half races, which includes many new uses over global top-half
only data.
- Get rid of interlocked_sleep() and use msleep or BUF_LOCK where
appropriate.
- Use the lk mutex in place of the various hand rolled semaphores.
- Stop dropping the lk lock before we panic.
- Fix getdirtybuf() callers so that they reacquire access to whatever
softdep datastructure they were inxpecting in the failure/retry
case. Previously, sleeps in getdirtybuf() could leave us with
pointers to bad memory.
- Update handling of ffs to be compatible with ffs locking changes.
Sponsored By: Isilon Systems, Inc.
- Use the buffer lock on the superblock buf to serialize calls to
sbupdate.
- Set the MNTK_MPSAFE flag when QUOTA is not defined in the kernel.
Sponsored By: Isilon Systems, Inc.
it is now quite naturally protected by the ufsmount mutex.
- Use the ufs lock to protect various fields in struct fs, primarily the
cg summary needs protection to avoid allocation races. Several
functions have been slightly re-arranged to reduce the number of
lock operations.
- Adjust several functions (blkfree, freefile, etc.) to accept a
ufsmount as an argument so that we may access the ufs lock.
Sponsored By: Isilon Systems, Inc.
Without this fix, when ACLs are set via tunefs(8) on the root file system,
they are removed on boot when 'mount -a' is called, because mount(8)
called for the root file system always add MNT_UPDATE flag and MNT_UPDATE
flag isn't perfect.
Now, one cannot remove ACLs stored in superblock (configured with tunefs(8))
via 'mount -a' nor 'mount -u -o noacls <file system>', but it is still
possible to mount file system which doesn't have ACLs in superblock via
'mount -o acls <file system>' or /etc/fstab's 'acls' option.
Reported by: Lech Lorens/pl.comp.os.bsd
Discussed with: phk, rwatson
Reviewed by: rwatson
MFC after: 2 weeks
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:
The credentials for syncing a file (ability to write to the
file) should be checked at the system call level.
Credentials for syncing one or more filesystems ("none")
should be checked at the system call level as well.
If the filesystem implementation needs a particular credential
to carry out the syncing it would logically have to the
cached mount credential, or a credential cached along with
any delayed write data.
Discussed with: rwatson
four different locations on a prospective filesystem.
If we found none, we forgot to invalidate the four buffers, thus the
following sequence would fails:
(md0 = blank disk)
mount /dev/md0 /mnt
(fails, no superblocks)
newfs /dev/md0
(writes using physio which does not go through buffercache).
mount /dev/md0 /mnt
(still fails, the four cached buffers still contain no superblocks)
Found by: ru
prematurely report that they were full and/or to panic the kernel
with the message ``ffs_clusteralloc: allocated out of group''.
Submitted by: Henry Whincup <henry@jot.to>
MFC after: 1 week
split the conversion of the remaining three filesystems out from the root
mounting changes, so in one go:
cd9660:
Convert to nmount.
Add omount compat shims.
Remove dedicated rootfs mounting code.
Use vfs_mountedfrom()
Rely on vfs_mount.c calling VFS_STATFS()
nfs(client):
Convert to nmount (the simple way, mount_nfs(8) is still necessary).
Add omount compat shims.
Drop COMPAT_PRELITE2 mount arg compatibility.
ffs:
Convert to nmount.
Add omount compat shims.
Remove dedicated rootfs mounting code.
Use vfs_mountedfrom()
Rely on vfs_mount.c calling VFS_STATFS()
Remove vfs_omount() method, all filesystems are now converted.
Remove MNTK_WANTRDWR, handling RO/RW conversions is a filesystem
task, and they all do it now.
Change rootmounting to use DEVFS trampoline:
vfs_mount.c:
Mount devfs on /. Devfs needs no 'from' so this is clean.
symlink /dev to /. This makes it possible to lookup /dev/foo.
Mount "real" root filesystem on /.
Surgically move the devfs mountpoint from under the real root
filesystem onto /dev in the real root filesystem.
Remove now unnecessary getdiskbyname().
kern_init.c:
Don't do devfs mounting and rootvnode assignment here, it was
already handled by vfs_mount.c.
Remove now unused bdevvp(), addaliasu() and addalias(). Put the
few necessary lines in devfs where they belong. This eliminates the
second-last source of bogo vnodes, leaving only the lemming-syncer.
Remove rootdev variable, it doesn't give meaning in a global context and
was not trustworth anyway. Correct information is provided by
statfs(/).
doesn't. Most of the implementations have grown weeds for this so they
copy some fields from mnt_stat if the passed argument isn't that.
Fix this the cleaner way: Always call the implementation on mnt_stat
and copy that in toto to the VFS_STATFS argument if different.
initializations but we did have lofty goals and big ideals.
Adjust to more contemporary circumstances and gain type checking.
Replace the entire vop_t frobbing thing with properly typed
structures. The only casualty is that we can not add a new
VOP_ method with a loadable module. History has not given
us reason to belive this would ever be feasible in the the
first place.
Eliminate in toto VOCALL(), vop_t, VNODEOP_SET() etc.
Give coda correct prototypes and function definitions for
all vop_()s.
Generate a bit more data from the vnode_if.src file: a
struct vop_vector and protype typedefs for all vop methods.
Add a new vop_bypass() and make vop_default be a pointer
to another struct vop_vector.
Remove a lot of vfs_init since vop_vector is ready to use
from the compiler.
Cast various vop_mumble() to void * with uppercase name,
for instance VOP_PANIC, VOP_NULL etc.
Implement VCALL() by making vdesc_offset the offsetof() the
relevant function pointer in vop_vector. This is disgusting
but since the code is generated by a script comparatively
safe. The alternative for nullfs etc. would be much worse.
Fix up all vnode method vectors to remove casts so they
become typesafe. (The bulk of this is generated by scripts)
setting the B_REMFREE flag in the buf. This is done to prevent lock order
reversals with code that must call bremfree() with a local lock held.
This also reduces overhead by removing two lock operations per buf for
fsync() and similar.
- Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock
has been acquired so that we may remove ourself from the free-list.
- Provide a bremfreef() function to immediately remove a buf from a
free-list for use only by NFS. This is done because the nfsclient code
overloads the b_freelist queue for its own async. io queue.
- Simplify the numfreebuffers accounting by removing a switch statement
that executed the same code in every possible case.
- getnewbuf() can encounter locked bufs on free-lists once Giant is removed.
Remove a panic associated with this condition and delay asserts that
inspect the buf until after it is locked.
Reviewed by: phk
Sponsored by: Isilon Systems, Inc.
This eliminates a bunch of vnode overhead (approx 1-2 % speed
improvement) and gives us more control over the access to the storage
device.
Access counts on the underlying device are not correctly tracked and
therefore it is possible to read-only mount the same disk device multiple
times:
syv# mount -p
/dev/md0 /var ufs rw 2 2
/dev/ad0 /mnt ufs ro 1 1
/dev/ad0 /mnt2 ufs ro 1 1
/dev/ad0 /mnt3 ufs ro 1 1
Since UFS/FFS is not a synchrousely consistent filesystem (ie: it caches
things in RAM) this is not possible with read-write mounts, and the system
will correctly reject this.
Details:
Add a geom consumer and a bufobj pointer to ufsmount.
Eliminate the vnode argument from softdep_disk_prewrite().
Pick the vnode out of bp->b_vp for now. Eventually we
should find it through bp->b_bufobj->b_private.
In the mountcode, use g_vfs_open() once we have used
VOP_ACCESS() to check permissions.
When upgrading and downgrading between r/o and r/w do the
right thing with GEOM access counts. Remove all the
workarounds for not being able to do this with VOP_OPEN().
If we are the root mount, drop the exclusive access count
until we upgrade to r/w. This allows fsck of the root
filesystem and the MNT_RELOAD to work correctly.
Set bo_private to the GEOM consumer on the device bufobj.
Change the ffs_ops->strategy function to call g_vfs_strategy()
In ufs_strategy() directly call the strategy on the disk
bufobj. Same in rawread.
In ffs_fsync() we will no longer see VCHR device nodes, so
remove code which synced the filesystem mounted on it, in
case we came there. I'm not sure this code made sense in
the first place since we would have taken the specfs route
on such a vnode.
Redo the highly bogus readblock() function in the snapshot
code to something slightly less bogus: Constructing an uio
and using physio was really quite a detour. Instead just
fill in a bio and ship it down.
Give ffs it's own bufobj->bo_ops vector and create a private strategy
routine, (currently misnamed for forwards compatibility), which is
just a copy of the generic bufstrategy routine except we call
softdep_disk_prewrite() directly instead of through the buf_prewrite()
indirection.
Teach UFS about the need for softdep_disk_prewrite() and call the
function directly in FFS.
Remove buf_prewrite() from the default bufstrategy() and from the
global bio_ops method vector.
We keep si_bsize_phys around for now as that is the simplest way to pull
the number out of disk device drivers in devfs_open(). The correct solution
would be to do an ioctl(DIOCGSECTORSIZE), but the point is probably mooth
when filesystems sit on GEOM, so don't bother for now.
is ffs_copyonwrite() and the only place it can be called from is FFS which
would never want to call another filesystems copyonwrite method, should one
exist, so there is no reason why anything generic should know about this.
Extend it with a strategy method.
Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY
song and dance.
Rename ibwrite to bufwrite().
Move the two NFS buf_ops to more sensible places, add bufstrategy
to them.
Add inlines for bwrite() and bstrategy() which calls through
buf->b_bufobj->b_ops->b_{write,strategy}().
Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
Initialize b_bufobj for all buffers.
Make incore() and gbincore() take a bufobj instead of a vnode.
Make inmem() local to vfs_bio.c
Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj)
also VI_MTX() to BO_MTX(),
Make buf_vlist_add() take a bufobj instead of a vnode.
Eliminate other uses of bp->b_vp where bp->b_bufobj will do.
Various minor polishing: remove "register", turn panic into KASSERT,
use new function declarations, TAILQ_FOREACH_SAFE() etc.
Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write
count on a bufobj. Bufobj_wdrop() replaces vwakeup().
Use these functions all relevant places except in ffs_softdep.c where
the use if interlocked_sleep() makes this impossible.
Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
It can be used to delay mounting root partition to give a chance to GEOM
providers to show up.
Now, when there is no needed provider, vfs_rootmount() function will look
for it every second and if it can't be find in defined time, it'll ask
for root device name (before this change it was done immediately).
This will allow to boot from gmirror device in degraded mode.
too much kernel copying, but it is not the right way to do it, and it is
in the way for straightening out the buffer cache.
The right way is to pass the VM page array down through the struct
bio to the disk device driver and DMA directly in to/out off the
physical memory. Once the VM/buf thing is sorted out it is next on
the list.
Retire most of vnode method. ffs_getpages(). It is not clear if what is
left shouldn't be in the default implementation which we now fall back to.
Retire specfs_getpages() as well, as it has no users now.
and the previously malloc'ed snapshot lock.
Malloc struct snapdata instead of just the lock.
Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes).
While here, give the private readblock() function a vnode argument
in preparation for moving UFS to access GEOM directly.
preparation for integration of p4::phk_bufwork. In the future,
local filesystems will talk to GEOM directly and they will consequently
be able to issue BIO_DELETE directly. Since the removal of the fla
driver, BIO_DELETE has effectively been a no-op anyway.
has only been partly initialized via newfs(8) so that it applies to both
UFS1 and UFS2.
Submitted by: "Xin LI" delphij at frontfree dot net
MFC: maybe?
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers. Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.
Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks. Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).
Reviewed by: green, rwatson (both earlier versions)
and refuse initializing filesystems with a wrong version. This will
aid maintenance activites on the 5-stable branch.
s/vfs_mount/vfs_omount/
s/vfs_nmount/vfs_mount/
Name our filesystems mount function consistently.
Eliminate the namiedata argument to both vfs_mount and vfs_omount.
It was originally there to save stack space. A few places abused
it to get hold of some credentials to pass around. Effectively
it is unused.
Reorganize the root filesystem selection code.
Add local rootvp variables as needed.
Remove checks for miniroot's in the swappartition. We never did that
and most of the filesystems could never be used for that, but it had
still been copy&pasted all over the place.
somewhat clearer, but more importantly allows for a consistent naming
scheme for suser_cred flags.
The old name is still defined, but will be removed in a few days (unless I
hear any complaints...)
Discussed with: rwatson, scottl
Requested by: jhb
This is to allow filesystems to decide based on the passed thread
which vnode to return.
Several filesystems used curthread, they now use the passed thread.
our cached 'next vnode' being removed from this mountpoint. If we
find that it was recycled, we restart our traversal from the start
of the list.
Code to do that is in all local disk filesystems (and a few other
places) and looks roughly like this:
MNT_ILOCK(mp);
loop:
for (vp = TAILQ_FIRST(&mp...);
(vp = nvp) != NULL;
nvp = TAILQ_NEXT(vp,...)) {
if (vp->v_mount != mp)
goto loop;
MNT_IUNLOCK(mp);
...
MNT_ILOCK(mp);
}
MNT_IUNLOCK(mp);
The code which takes vnodes off a mountpoint looks like this:
MNT_ILOCK(vp->v_mount);
...
TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes);
...
MNT_IUNLOCK(vp->v_mount);
...
vp->v_mount = something;
(Take a moment and try to spot the locking error before you read on.)
On a SMP system, one CPU could have removed nvp from our mountlist
but not yet gotten to assign a new value to vp->v_mount while another
CPU simultaneously get to the top of the traversal loop where it
finds that (vp->v_mount != mp) is not true despite the fact that
the vnode has indeed been removed from our mountpoint.
Fix:
Introduce the macro MNT_VNODE_FOREACH() to traverse the list of
vnodes on a mountpoint while taking into account that vnodes may
be removed from the list as we go. This saves approx 65 lines of
duplicated code.
Split the insmntque() which potentially moves a vnode from one mount
point to another into delmntque() and insmntque() which does just
what the names say.
Fix delmntque() to set vp->v_mount to NULL while holding the
mountpoint lock.
fixes was applicable to HEAD, originally it was thought this
should only be done in RELENG_4. Implement IO_INVAL in the vnode
op for writing by marking the buffer as "no cache". This fix
has already been applied to RELENG_4 as Rev. 1.65.2.15 of
ufs/ufs/ufs_readwrite.c.
Reviewed by: alc, tegge
fragment to zero the valid parts of a VM_IO buffer.
RE would like this to be part of 4.10-RC3 so this will be MFC-ed immediately.
Reviewed by: alc, tegge
