Commit Graph

17 Commits

Author SHA1 Message Date
Doug Ambrisko
b376d47740 - Fixes for suspend/resume code (MPI-350)
- Cache temp. keys so they are preserved across suspend/resume (MPI-350)
- Reads and writes are real fast to the MPI-350 causing early timeouts so
  wait do some DELAYs to slow things down in the spin loops.
- Stream line setting RIDs when they are better to be set via another
  function
- Add better support for setting home key via "ifconfig an0 wepkey 9:<key>"

Tested by:	Peter Radcliffe <pir@pir.net> (in -stable)
		myself in -current & -stable
MFC in:		3 days
2003-02-08 04:41:17 +00:00
Doug Ambrisko
01de2955e4 Support for suspend/resume in laptops. Loosely based on the wi(4) patches
but not quite.  The memory descriptors and most of the card parameters
need to be writen to the card.

MFC in:		3 days
2003-02-05 03:37:42 +00:00
Doug Ambrisko
e61838b128 Some small enhancments
-	Implement TX power control with hints to code in Linux driver
	by Douglas S. J. De Couto <decouto@lcs.mit.edu>
      -	Update ifmedia support to use ieee80211_rate2media and
	ieee80211_media2rate.  Note doesn't work with stock ifconfig
	since there seems to be an issue with the setmedia code.
	"ancontrol -t" works now, before it did nothing.
      -	Fix spelling error in header.
2003-02-02 22:49:31 +00:00
Doug Ambrisko
6cafe2646a Add support for MPI-350 the mini-pci Cisco Aironet card. This needs more
work.  The interface was gleaned from the Linux driver.  Currently only
one RX & one TX buffer are used.  Firmware support is not tested so for the
MPI-350 so it is disabled.  Signal cache and monitor mode are not supported
yet.  Signal cache is not supported since in encapsulation mode ethernet
frames are returned by the chip.  LAN monitor mode support will be added
shortly.  Thanks to Warner for the MPI-350 card he sent me.

Add support for RSSI map from PR kern/32880 which was incomplete.  Enhanced
with the ability to select the cache mode of raw, dbm or per-cent.

Clean up Signal/Noise/Quality structures and units with help from
Marco Molteni.

Change flash to use a malloc'ed buffer when needed.

PR:		kern/32880
Submitted by:	Douglas S. J. De Couto decouto@pdos.lcs.mit.edu,
		Marco Molteni
MFC:		3 weeks
2002-12-29 19:22:07 +00:00
Alfred Perlstein
4f492bfab5 use __packed. 2002-09-23 18:54:32 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Doug Ambrisko
0d6fcb5c0e Fix bugs in the structure for rx_frame by making gap length one byte and
a packed array so sizeof work.  This broke RFMON mode and passing
up 802.11 packets.

The Linux emulation code was derived from the open source Linux driver to
maintain compatibility.

LEAP support is added, hints from Richard Johnson.  I've verified this
locally with PC350v42510.img firmware.  More bug fixing from Marco to
fix long passwords.

Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep
so it doesn't look like your system died during a flash update.

Install header files in /usr/include/dev/an

Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol.
This way you can manage 2 keys a little easier.  Map the home mode into
key 5.  Enhance ifconfig to dump the various configured SSIDs.  I use
a bunch of different ones and roam between them.  Use the syntax similar
to the WEP keys to deal with setting difference SSIDs.

Bump up up the Card capabilities RID since they added 2 bytes to it
in the latest firmware.  Thankfully we changed it from a terminal
failure so the card still worked but the driver whined.

Some cleanup patches from Marco Molteni.

Submitted by:	Richard Johnson <raj@cisco.com>
		Marco Molteni <molter@tin.it>
		and myself
Various checks: David Wolfskill <david@catwhisker.org>
Reviewed by:	Brooks Davis <brooks@freebsd.org>
		Warner Losh <imp@freebsd.org>
Approved by:	Brooks Davis <brooks@freebsd.org>
		Warner Losh <imp@freebsd.org>
Obtained from:	Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
Brooks Davis
a744995d49 Lots of style(9) related white space fixes. Mostly missing spaces
after if, for, while, switch, '{', and '}' plus a bunch of bogus
whitespace at the end of lines.
2001-09-10 02:36:18 +00:00
Brooks Davis
a4806cd1df Cleanup duplication in Aironet headers
PR:		kern/29210
Submitted by:	Doug Ambrisko <ambrisko@ambrisko.com>
MFC after:	3 days
2001-07-27 16:05:21 +00:00
Brooks Davis
1d3771386f Fix a number of bugs in the implementation of the WEP related status
functions in ifconfig.  "ifconfig an0" should output the correct
status now.  Also, make the read and write functions both more
robust and more consistant.  This should stop most of the incorrect
size complaints and eliminate the possiability of panics from firmware
that increases resource sizes.

PR:		kern/27826
Reviewed by:	imp, jlemon
Submitted by:	Doug Ambrisko <ambrisko@ambrisko.com>
		David Wolfskill <dhw@whistle.com>
2001-06-22 23:35:24 +00:00
Poul-Henning Kamp
419d8080a4 Currently, each wireless networking driver has it's own control program
despite the fact that most people want to set exactly the same settings
regardless of which card they have.  It has been repeatidly suggested
that this configuration should be done via ifconfig.  This patch
implements the required functionality in ifconfig and add support to the
wi and an drivers.  It also provides partial, untested support for the
awi driver.

PR:		25577
Submitted by:	Brooks Davis <brooks@one-eyed-alien.net>
2001-05-26 09:27:08 +00:00
Archie Cobbs
53046c5fd5 A few fixes..
1 Make promiscuous mode work
    2 A few header additions
    3 Allow device config before IFF_UP

These were (respectively)...

Submitted by:	Allan Saddi <asaddi@philosophysw.com>
Submitted by:	Dave Cornejo <dave@dogwood.com>
Submitted by:	Doug Ambrisko <ambrisko@ambrisko.com>
Tested by:	David Wolfskill <dhw@whistle.com>
2001-03-23 17:46:32 +00:00
Bosko Milekic
9ed346bab0 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
Archie Cobbs
1725b22ad2 Fixes to the Aironet driver to clear up some WEP issues.
PR:		23097
Submitted by:	Doug Ambrisko <ambrisko@whistle.com>
2000-12-08 19:00:10 +00:00
Bill Paul
a614c4dc7b Close PR# 21843 and PR# 21864. This adds support for WEP and updates some
of the data structures to include new members that weren't defined in the
manual I have.

I opted to use Doug Ambrisko's WEP patches since David Cornejo's patches
did not include the necessary changes to ancontrol(8) to actually enable
and use WEP.

NOTE: I don't currently have access to an Aironet card, so I can't test
any of this. Everything compiles and close scrutiny doesn't reveal any
obvious problems, but Murphy's Law applies. This means I will probably
leave these changes in -current for a bit longer than usual until I'm
sure they work right.
2000-11-13 23:04:16 +00:00
Bill Paul
736f03e49a Convert the Aironet driver to use mutexes instead of spls. 2000-10-13 21:58:36 +00:00
Bill Paul
261b9b3066 Add driver support for the Aironet 4500/4800 series wireless 802.11
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.

Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00