Commit Graph

38 Commits

Author SHA1 Message Date
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
John Baldwin
51b4eed974 Protect pri_to_rtp() with sched_lock when needed. 2001-09-02 00:52:11 +00:00
Matthew Dillon
2afac34da3 Make various posix4 system calls MPSAFE (will fixup syscalls.master later)
sched_setparam()
    sched_getparam()
    sched_setscheduler()
    sched_getscheduler()
    sched_yield()
    sched_get_priority_max()
    sched_get_priority_min()
    sched_rr_get_interval()
2001-08-31 22:34:40 +00:00
John Baldwin
688ebe120c - Close races with signals and other AST's being triggered while we are in
the process of exiting the kernel.  The ast() function now loops as long
  as the PS_ASTPENDING or PS_NEEDRESCHED flags are set.  It returns with
  preemption disabled so that any further AST's that arrive via an
  interrupt will be delayed until the low-level MD code returns to user
  mode.
- Use u_int's to store the tick counts for profiling purposes so that we
  do not need sched_lock just to read p_sticks.  This also closes a
  problem where the call to addupc_task() could screw up the arithmetic
  due to non-atomic reads of p_sticks.
- Axe need_proftick(), aston(), astoff(), astpending(), need_resched(),
  clear_resched(), and resched_wanted() in favor of direct bit operations
  on p_sflag.
- Fix up locking with sched_lock some.  In addupc_intr(), use sched_lock
  to ensure pr_addr and pr_ticks are updated atomically with setting
  PS_OWEUPC.  In ast() we clear pr_ticks atomically with clearing
  PS_OWEUPC.  We also do not grab the lock just to test a flag.
- Simplify the handling of Giant in ast() slightly.

Reviewed by:	bde (mostly)
2001-08-10 22:53:32 +00:00
Robert Watson
a0f75161f9 o Replace calls to p_can(..., P_CAN_xxx) with calls to p_canxxx().
The p_can(...) construct was a premature (and, it turns out,
  awkward) abstraction.  The individual calls to p_canxxx() better
  reflect differences between the inter-process authorization checks,
  such as differing checks based on the type of signal.  This has
  a side effect of improving code readability.
o Replace direct credential authorization checks in ktrace() with
  invocation of p_candebug(), while maintaining the special case
  check of KTR_ROOT.  This allows ktrace() to "play more nicely"
  with new mandatory access control schemes, as well as making its
  authorization checks consistent with other "debugging class"
  checks.
o Eliminate "privused" construct for p_can*() calls which allowed the
  caller to determine if privilege was required for successful
  evaluation of the access control check.  This primitive is currently
  unused, and as such, serves only to complicate the API.

Approved by:	({procfs,linprocfs} changes) des
Obtained from:	TrustedBSD Project
2001-07-05 17:10:46 +00:00
Robert Watson
e84b7987bc o Unfold p31b_proc() into the individual posix4 system calls so as to
allow call-specific authorization.
o Modify the authorization model so that p_can() is used to check
  scheduling get/set events, using P_CAN_SEE for gets, and P_CAN_SCHED
  for sets.  This brings the checks in line with get/setpriority().

Obtained from:	TrustedBSD Project
2001-06-30 07:55:19 +00:00
Robert Watson
1af55356f8 Replace some use of 'p' with 'targetp' so as to not scarily overload the
passed 'p' argument.  No functional change.

Obtained from:	USENIX Emporium, Cheap Tricks Department
2001-06-30 03:13:36 +00:00
Robert Watson
64e55bf47b Remove a fascinating but confusing construct involving chaining
conditional clauses in the following way:

	(0 || a || b);

No functional change.
2001-06-28 23:02:09 +00:00
Robert Watson
e8f7a95298 Add error checking for copyin() operations in posix4 scheduling code. 2001-06-28 22:53:42 +00:00
Robert Watson
b1fc0ec1a7 o Merge contents of struct pcred into struct ucred. Specifically, add the
real uid, saved uid, real gid, and saved gid to ucred, as well as the
  pcred->pc_uidinfo, which was associated with the real uid, only rename
  it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
  corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
  original macro that pointed.
  p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
  p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
  cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
  cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
  we figure out locking and optimizations; generally speaking, this
  means moving to a structure like this:
        newcred = crdup(oldcred);
        ...
        p->p_ucred = newcred;
        crfree(oldcred);
  It's not race-free, but better than nothing.  There are also races
  in sys_process.c, all inter-process authorization, fork, exec, and
  exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
  remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
  use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
  pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
  allocation.
o Clean up ktrcanset() to take into account changes, and move to using
  suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
  calls to better document current behavior.  In a couple of places,
  current behavior is a little questionable and we need to check
  POSIX.1 to make sure it's "right".  More commenting work still
  remains to be done.
o Update credential management calls, such as crfree(), to take into
  account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
      change_euid()
      change_egid()
      change_ruid()
      change_rgid()
      change_svuid()
      change_svgid()
  In each case, the call now acts on a credential not a process, and as
  such no longer requires more complicated process locking/etc.  They
  now assume the caller will do any necessary allocation of an
  exclusive credential reference.  Each is commented to document its
  reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
  and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
  questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
  processes and pcreds.  Note that this authorization, as well as
  CANSIGIO(), needs to be updated to use the p_cansignal() and
  p_cansched() centralized authorization routines, as they currently
  do not take into account some desirable restrictions that are handled
  by the centralized routines, as well as being inconsistent with other
  similar authorization instances.
o Update libkvm to take these changes into account.

Obtained from:	TrustedBSD Project
Reviewed by:	green, bde, jhb, freebsd-arch, freebsd-audit
2001-05-25 16:59:11 +00:00
Robert Watson
29b2efeb6b o First step in cleaning up authorization code for the posix4
implementation.  Move from direct uid 0 comparision to using suser_xxx()
  call with the same semantics.  Simplify CAN_AFFECT() macro as passed
  pcred was redundant.  The checks here still aren't "right", but they
  are probably "better".

Obtained from:	TrustedBSD Project
2001-05-06 16:15:42 +00:00
Mark Murray
fb919e4d5a Undo part of the tangle of having sys/lock.h and sys/mutex.h included in
other "system" header files.

Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.

Sort sys/*.h includes where possible in affected files.

OK'ed by:	bde (with reservations)
2001-05-01 08:13:21 +00:00
John Baldwin
6caa8a1501 Overhaul of the SMP code. Several portions of the SMP kernel support have
been made machine independent and various other adjustments have been made
to support Alpha SMP.

- It splits the per-process portions of hardclock() and statclock() off
  into hardclock_process() and statclock_process() respectively.  hardclock()
  and statclock() call the *_process() functions for the current process so
  that UP systems will run as before.  For SMP systems, it is simply necessary
  to ensure that all other processors execute the *_process() functions when the
  main clock functions are triggered on one CPU by an interrupt.  For the alpha
  4100, clock interrupts are delievered in a staggered broadcast fashion, so
  we simply call hardclock/statclock on the boot CPU and call the *_process()
  functions on the secondaries.  For x86, we call statclock and hardclock as
  usual and then call forward_hardclock/statclock in the MD code to send an IPI
  to cause the AP's to execute forwared_hardclock/statclock which then call the
  *_process() functions.
- forward_signal() and forward_roundrobin() have been reworked to be MI and to
  involve less hackery.  Now the cpu doing the forward sets any flags, etc. and
  sends a very simple IPI_AST to the other cpu(s).  AST IPIs now just basically
  return so that they can execute ast() and don't bother with setting the
  astpending or needresched flags themselves.  This also removes the loop in
  forward_signal() as sched_lock closes the race condition that the loop worked
  around.
- need_resched(), resched_wanted() and clear_resched() have been changed to take
  a process to act on rather than assuming curproc so that they can be used to
  implement forward_roundrobin() as described above.
- Various other SMP variables have been moved to a MI subr_smp.c and a new
  header sys/smp.h declares MI SMP variables and API's.   The IPI API's from
  machine/ipl.h have moved to machine/smp.h which is included by sys/smp.h.
- The globaldata_register() and globaldata_find() functions as well as the
  SLIST of globaldata structures has become MI and moved into subr_smp.c.
  Also, the globaldata list is only available if SMP support is compiled in.

Reviewed by:	jake, peter
Looked over by:	eivind
2001-04-27 19:28:25 +00:00
John Baldwin
33a9ed9d0e Change the pfind() and zpfind() functions to lock the process that they
find before releasing the allproc lock and returning.

Reviewed by:	-smp, dfr, jake
2001-04-24 00:51:53 +00:00
John Baldwin
3a18729505 Lock need_resched with sched_lock.
Reported by:	des
2001-02-22 13:46:09 +00:00
Jake Burkholder
d5a08a6065 Implement a unified run queue and adjust priority levels accordingly.
- All processes go into the same array of queues, with different
  scheduling classes using different portions of the array.  This
  allows user processes to have their priorities propogated up into
  interrupt thread range if need be.
- I chose 64 run queues as an arbitrary number that is greater than
  32.  We used to have 4 separate arrays of 32 queues each, so this
  may not be optimal.  The new run queue code was written with this
  in mind; changing the number of run queues only requires changing
  constants in runq.h and adjusting the priority levels.
- The new run queue code takes the run queue as a parameter.  This
  is intended to be used to create per-cpu run queues.  Implement
  wrappers for compatibility with the old interface which pass in
  the global run queue structure.
- Group the priority level, user priority, native priority (before
  propogation) and the scheduling class into a struct priority.
- Change any hard coded priority levels that I found to use
  symbolic constants (TTIPRI and TTOPRI).
- Remove the curpriority global variable and use that of curproc.
  This was used to detect when a process' priority had lowered and
  it should yield.  We now effectively yield on every interrupt.
- Activate propogate_priority().  It should now have the desired
  effect without needing to also propogate the scheduling class.
- Temporarily comment out the call to vm_page_zero_idle() in the
  idle loop.  It interfered with propogate_priority() because
  the idle process needed to do a non-blocking acquire of Giant
  and then other processes would try to propogate their priority
  onto it.  The idle process should not do anything except idle.
  vm_page_zero_idle() will return in the form of an idle priority
  kernel thread which is woken up at apprioriate times by the vm
  system.
- Update struct kinfo_proc to the new priority interface.  Deliberately
  change its size by adjusting the spare fields.  It remained the same
  size, but the layout has changed, so userland processes that use it
  would parse the data incorrectly.  The size constraint should really
  be changed to an arbitrary version number.  Also add a debug.sizeof
  sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
Peter Wemm
365c5db0a7 Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
Poul-Henning Kamp
eb95c536ad Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
Garrett Wollman
4505fec89e Add $FreeBSD$.
Initialize the POSIX.1b sysconf information appropriately for
non-optional kernel functions.
2000-04-22 15:13:06 +00:00
Matthew Dillon
36e9f877df Commit major SMP cleanups and move the BGL (big giant lock) in the
syscall path inward.  A system call may select whether it needs the MP
    lock or not (the default being that it does need it).

    A great deal of conditional SMP code for various deadended experiments
    has been removed.  'cil' and 'cml' have been removed entirely, and the
    locking around the cpl has been removed.  The conditional
    separately-locked fast-interrupt code has been removed, meaning that
    interrupts must hold the CPL now (but they pretty much had to anyway).
    Another reason for doing this is that the original separate-lock for
    interrupts just doesn't apply to the interrupt thread mechanism being
    contemplated.

    Modifications to the cpl may now ONLY occur while holding the MP
    lock.  For example, if an otherwise MP safe syscall needs to mess with
    the cpl, it must hold the MP lock for the duration and must (as usual)
    save/restore the cpl in a nested fashion.

    This is precursor work for the real meat coming later: avoiding having
    to hold the MP lock for common syscalls and I/O's and interrupt threads.
    It is expected that the spl mechanisms and new interrupt threading
    mechanisms will be able to run in tandem, allowing a slow piecemeal
    transition to occur.

    This patch should result in a moderate performance improvement due to
    the considerable amount of code that has been removed from the critical
    path, especially the simplification of the spl*() calls.  The real
    performance gains will come later.

Approved by: jkh
Reviewed by: current, bde (exception.s)
Some work taken from: luoqi's patch
2000-03-28 07:16:37 +00:00
Jason Evans
4f249023a4 Track libc_r addition of semaphores implementation.
Approved by:	jkh
2000-01-20 07:55:42 +00:00
Peter Wemm
c447342094 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 05:07:58 +00:00
Bruce Evans
9f79feec16 Fixed some type mismatches. p_retval[0] in struct proc has type
register_t, so pointers to it must be passed around as `register_t *',
not as `int *'.  The type mismatches were non-benign on alphas, but
the broken code is normally only configured by LINT.
1999-12-27 10:22:09 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Peter Wemm
e91896117b Well folks, this is it - The second stage of the removal for build support
for LKM's..
1999-04-17 08:36:07 +00:00
Doug Rabson
ce02431ffa * Change sysctl from using linker_set to construct its tree using SLISTs.
This makes it possible to change the sysctl tree at runtime.

* Change KLD to find and register any sysctl nodes contained in the loaded
  file and to unregister them when the file is unloaded.

Reviewed by: Archie Cobbs <archie@whistle.com>,
	Peter Wemm <peter@netplex.com.au> (well they looked at it anyway)
1999-02-16 10:49:55 +00:00
Peter Dufault
ce47711dee Set PAGE_SIZE for _SC_PAGESIZE sysconf(). 1998-06-01 21:54:43 +00:00
Peter Dufault
aebde78243 1. Add new defs for mins and maxs for the POSIX flavor priorities. They
end up being the same, but it doesn't look like you're comparing
apples and oranges.

2. Use need_resched instead of reset_priority.  This isn't right
either, since for example you'll round-robin against equal priority FIFO
processes when lowering the priority of another process,
but this works better and a real fix needs to be in kern_synch and
not out here.

3. This is not a device driver: copyin/copyout the structure.
1998-05-19 21:11:53 +00:00
Peter Dufault
2a61a11038 1. Don't use "nosys" and generate coredumps for unconfigured
system calls - return ENOSYS per the spec.

2. Fix interface stub to set priority properly.
1998-05-18 12:53:45 +00:00
John Birrell
56594472c0 Add C++ support.
Submitted by: Russell L. Carter <rcarter@pinyon.org>
              fixes omniORB25 built with g++-2.8.1 on -current
1998-05-12 05:11:51 +00:00
Bruce Evans
c1087c1324 Support compiling with `gcc -ansi'. 1998-04-15 17:47:40 +00:00
Peter Dufault
adc5342c47 The system call stubs for the sched_* system calls can't be
optional.

The kernel will now link but the new system calls can't be LKM'd in
without the P1003_1B option - I will remove this option later.
1998-03-28 22:44:28 +00:00
Peter Dufault
38c76440b8 Include sys/resource.h to get PRIO_MAX. 1998-03-28 14:49:47 +00:00
Peter Dufault
8a6472b723 Finish _POSIX_PRIORITY_SCHEDULING. Needs P1003_1B and
_KPOSIX_PRIORITY_SCHEDULING options to work.  Changes:

Change all "posix4" to "p1003_1b".  Misnamed files are left
as "posix4" until I'm told if I can simply delete them and add
new ones;

Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux;

Add man pages for _POSIX_PRIORITY_SCHEDULING system calls;

Add options to LINT;

Minor fixes to P1003_1B code during testing.
1998-03-28 11:51:01 +00:00
Bruce Evans
957f617878 Fixed syntax errors. 1998-03-23 14:06:25 +00:00
Bruce Evans
35ec516616 Don't depend on namespace pollution to help misdeclare pointers as arrays. 1998-03-23 14:05:25 +00:00
Peter Dufault
aac4ad2c99 Reviewed by: bde
Changes to support building with _POSIX_SOURCE set to 199309L:

1. Add sys/_posix.h to handle those preprocessor defs that POSIX
says have effects when defined before including any header files;

2. Change POSIX4_VISIBLE back to _POSIX4_VISIBLE

3. Add _POSIX4_VISIBLE_HISTORICALLY for pre-existing BSD features now
defined in POSIX.  These show up when:

_POSIX_SOURCE and _POSIX_C_SOURCE are not set or
_POSIX_C_SOURCE is set >= 199309L

and vanish when:

_POSIX_SOURCE is set or _POSIX_C_SOURCE is < 199309L.

4. Explain these in man 9 posix4;

5. Include _posix.h and conditionalize on new feature test.
1998-03-08 17:25:38 +00:00
Peter Dufault
917e476dad Reviewed by: msmith, bde long ago
POSIX.4 headers and sysctl variables.  Nothing should change
unless POSIX4 is defined or _POSIX_VERSION is set to 199309.
1998-03-04 10:27:00 +00:00