Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
config(8). This commit allows control of the creation of the
#include "foo.h" files. We now only create them explicitly when needed.
BTW; these are mostly bad because they usually imply static limits on
numbers of units for devices. eg: struct mysoftc sc[NFOO];
These static limits have Got To Go.
directory than the default one. If the option is not given, then the
output of config is exactly as before. Only when an alternate output
directory has been specified will config modify its behavior.
Additional changed:
o Remove the now conflicting and unused NODEV define. It
conflicts with NODEV in sys/param.h.
o Rename the now conflicting MACHINE token to ARCH. It
conflicts with MACHINE in sys/param.h.
o Fix some easy style bugs.
o Fix some easy grammar bugs in the manpage.
Approved by: peter, archie
- make this work: options FOO123=456 *without quotes*
- grumble (but accept) vector xxxintr, and tty/net/bio/cam flags.
- complain if a device is specified twice (eg: 2 x psm0)
- don't require quotes around: port IO_COM2
- recognize negative numbers. (ie: options CAM_DEBUG_UNIT=-1)
- GC some more unused stuff (we don't have composite disks from config(8)).
- various other nits (snprintf paranoia etc)
I zapped the MACHINE_MIPS stuff, it isn't likely to be useful apart from
recognition of the machine name. It would be reasonable to expect new
ports would look something like the alpha/i386 from a config perspective.
Requested-by: ache
bde
dg
Modify targets for debug kernels: when -g was specified, make will
now build a debug kernel called kernel.debug, and create a stripped
version called kernel at the same time. The two targets install and
install.debug are otherwise unchanged.
Requested-by: dillon
Update man page accordingly.
2. Config complains if you use -g:
Debugging is enabled by default, there is no ned to specify the -g option
3. Config warns you if you don't use -s:
Building kernel with full debugging symbols. Do
"config -s BSD" for historic partial symbolic support.
To install the debugging kernel, do make install.debug
(BSD was the name of the config file I used; I print out the same
name).
4. Modify Makefile.i386, Makefile.alpha, Makefile.pc98 and config to
work if a kernel name other than 'kernel' is specified. This is
not absolutely necessary, but useful, and it was relatively easy.
I now have a kernel called /crapshit :-)
5. Modify Makefile.i386, Makefile.alpha, Makefile.pc98 "clean" target
to remove both the debug and normal kernel.
6. Modify all to install the stripped kernel by default and the debug
kernel if you enter "make install.debug".
7. Update version number of Makefiles and config.
- Use MAP_FAILED instead of the constant -1 to indicate
failure (required by POSIX).
- Removed flag arguments of '0' (required by POSIX).
- Fixed code which expected an error return of 0.
- Fixed code which thought any address with the high bit set
was an error.
- Check for failure where no checks were present.
Discussed with: bde
is conditionalized by the INCLUDE_CONFIG_FILE option in your kernel config
file and is not turned on by default.
Submitted-By: Bill Pechter <pechter@shell.monmouth.com>
Note that this code is dormant unless the options files exist.
Also, parsing of quoted options in the config files is improved.
What this allows, is all the options in LINT to be specified to be
configured as #defines in a file rather than on the CC command line at
kernel build time. This means that 'make depend' will catch dependencies
on actual *options*, meaning that you can run 'config' and 'make depend'
in complete safety WITHOUT removing the compile directory each time.
Unfortunately, this requires a pass over the source to get the individual
files to #include the new .h files that would be generated by config.
This has a small compile time penalty (appears up to about 2% slower)
from a "fresh" build. Of course, you should not be needing to do complete
rebuilds very often once this was completed, so it would be an overall
win for most people.
Since this code is dormant and we've got a lot of other things happening
on the kernel tree at the moment (prototypes, devfs, static declarations
etc) I am not planning on doing any changes to activate this feature just
yet.
may not be desired if you're just going to blow the kernel away again later)
and substitute one that tells the user where the new kernel build
directory actually IS, which can at least be argued to be useful information
in all cases.
Reviewed by: davidg
If you invoke config with the `-n' flag or have NO_CONFIG_CLOBBER in
your environment, config will behave the same way it used to. This is
now _documented_ as well. Rip out all the CONFIG_DONT_CLOBBER cruft;
some of it wasn't even correct anyway.
/*
* filename [ standard | optional ] [ config-dependent ]
* [ dev* | profiling-routine ] [ device-driver] [ no-obj ]
* [ compile-with "compile rule" [no-implicit-rule] ]
* [ dependancy "dependancy-list"]
*/
I added
no-obj - This entry does not create anything linkable to the kernel.
dependancy - Add additional dependancy rules to a target.
no-implicit-rule - Don't assume .c -> .o type rules. Config is really
dumb in this area and assumes that everything is a .c file
irregarless of extention. This was the best choice really
since there may even be .c file that you don't want to follow
the standard rules.
This was all done so that the building to the aic7770 assembler and using
the aic7770 assembler in the building of the aic7770 driver could be config
dependant. I can now have an entry like this for the driver:
aic7770 optional ahc device-driver \
compile-with "${CC} $> -o $@" \
dependancy "$S/gnu/misc/aic7770/aic7770.c" \
no-obj no-implicit-rule
aic7770_seq.h optional ahc device-driver \
compile-with "${.CURDIR}/aic7770 -o $@ $S/gnu/misc/aic7770/aic7770.seq"\
dependancy "$S/gnu/misc/aic7770/aic7770.seq aic7770" \
no-obj no-implicit-rule
i386/isa/aic7770.c optional ahc device-driver \
dependancy "aic7770_seq.h"
I also added '\' escaping to newlines so that this doesn't look as gross as
it could have.
Reviewed by: jkh
conditional did it backwards, thus flipping the behavior back off
again by default (and only re-enableable through a very counter-intuitive
option setting!). I'm glad I caught this and would merely like to state
again for the record that if you're going to go and modify my changes then
you should at least:
1. Do it correctly, since to do otherwise is kind of a slap in the
face.
2. TELL me.
This is not me just being compulsive, this is simple courtesy.
I'm speaking just of my own preferences here, not necessarily trying
to impose my standards on the group at large (e.g. some other folks might
not even care).
Submitted by: jkh
and recreate any previous ../../compile/<blah> directory before laying
down new files. The depends just aren't smart enough to save
us from the grief that config's old behavior has always caused.
Submitted by: jkh
