This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
Lua allocates LUAL_BUFFERSIZE buffers on the stack for various string
functions (string.format, string.gsub) -- this works out to be somewhat
significant and not necessary, based on how we use string operations.
Dropping it risks having to allocate per call to format/gsub, but this is
not the case for our usage. This simply stops allocating 8K buffers on the
stack when luaL_Buffer is used.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22500
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
FreeBSDlua ("flua") is a FreeBSD-private lua, flavored with whatever
extensions we need for base system operations. We currently support a subset
of lfs and lposix that are used in the rewrite of makesyscall.sh into lua,
added in r354786.
flua is intentionally written such that one can install standard lua and
some set of lua modules from ports and achieve the same effect.
linit_flua is a copy of linit.c from contrib/lua with lfs and lposix added
in. This is similar to what we do in stand/. linit.c has been renamed to
make it clear that this has flua-specific bits.
luaconf has been slightly obfuscated to make extensions more difficult. Part
of the problem is that flua is already hard enough to use as a bootstrap
tool because it's not in PATH- attempting to do extension loading would
require a special bootstrap version of flua with paths changed to protect
the innocent.
src.lua.mk has been added to make it easy for in-tree stuff to find flua,
whether it's bootstrap-flua or relying on PATH frobbing by Makefile.inc1.
Reviewed by: brooks, emaste (both earlier version), imp
Differential Revision: https://reviews.freebsd.org/D21893
As described previously, loader.lua_path is absolute path where scripts are
installed. A future commit will use this to build paths for dofile in
try_include, rather than the current pcall/require setup that makes it more
difficult to coordinate loader aborts from local.lua -- we do not need the
flexibility of require(), and local.lua is in-fact not a 'module-like' file
as we will not be referencing anything from it.
Multiple places coordinate to 'know' where lua scripts are installed. Knock
this down to being formally defined (and overridable) in exactly one spot,
defs.mk, and spread the knowledge to loaders and liblua alike. A future
commit will expose this to lua as loader.lua_path, so it can build absolute
paths to lua scripts as needed.
MFC after: 1 week
This relies on libbearssl and libsecureboot
to verify files read by loader in a maner equivalent
to how mac_veriexec
Note: disabled by default.
Use is initially expected to be by embeded vendors
Reviewed by: emaste, imp
Sponsored by: Juniper Networks
Differential Revision: D16336
An integrity check such as a check-hash or a cross-correlation failed.
The integrity error falls between EINVAL that identifies errors in
parameters to a system call and EIO that identifies errors with the
underlying storage media. EINTEGRITY is typically raised by intermediate
kernel layers such as a filesystem or an in-kernel GEOM subsystem when
they detect inconsistencies. Uses include allowing the mount(8) command
to return a different exit value to automate the running of fsck(8)
during a system boot.
These changes make no use of the new error, they just add it. Later
commits will be made for the use of the new error number and it will
be added to additional manual pages as appropriate.
Reviewed by: gnn, dim, brueffer, imp
Discussed with: kib, cem, emaste, ed, jilles
Differential Revision: https://reviews.freebsd.org/D18765
Some fixes:
- Maintain historical behavior more accurately w.r.t verbose_loading;
verbose_loading strictly prints "${module_name...}" and later "failed!"
or "ok" based on load success
- With or without verbose_loading, dump command_errbuf on load failure.
This usually happens prior to ok/failed if we're verbose_loading
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17694
This will be used for scenarios where the command to execute is coming in
via the environment (from, for example, loader.conf(5)) and is thus not
necessarily trusted.
cli_execute_unparsed will immediately be used for handling
module_{before,after,error} as well as menu_timeout_command. We still want
to offer these variables the ability to execute Lua-intercepted loader
commands, but we don't want them to be able to execute arbitrary Lua.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D14580
This allows lua to pass back a command string to be executed as if it were
typed at the loader prompt- loader tries to execute the string first as pure
lua, then parses it and gives lua a chance to intercept before it tries to
execute it itself.
This will be used to implement menu_timeout_command, among other things,
which *should* be used to execute basic loader commands independent of the
chosen interpreter.
printc does not need the features or the overhead of printf. It does not
take formatting strings, and it pipes the single string argument through an
"%s" format.
Instead, use putc directly. This pipes the string through in its entirety as
a series of 'unsigned char's, generally straight to the console emulator.
Discussed with: tsoome
Write support (even if it only works on UFS) will be needed for nextboot
functionality.
Reviewed by: cem, imp
Differential Revision: https://reviews.freebsd.org/D14478
We need to ensure that we defined Numbers as int64_t everywhere we
build for lua. Previously, we were compiling part of the code with
Numbers as int64_t and part as double. Move lua number definition to a
more-central location
Provisioned from MACHINE/MACHINE_ARCH on the system, expose loader.machine
and loader.machine_arch respectively.
These may be used to hide ACPI option on non-applicable archs.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D14446
In the remaining error case, return a 3-tuple consistent with the other
error return case.
Document how to invoke lfs.attributes() and detect/decode error return in
example comments.
Reviewed by: kevans
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14451
In a similar fashion to FILE, provide thin shims for the standard directory
manipulation functions.
Reviewed by: imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14417
liblua glues the lua run time into the boot loader. It implements all
the runtime routines that lua expects. In addition, it has a few
standard 'C' headers that nueter various aspects of the LUA build that
are too specific to lua to be in libsa. Many refinements from the
original code to improve implementation and the number of included lua
libraries. Use int64_t for lua_Number. Have "/boot/lua" be the default
module path. Numerous cleanups from the original GSoC project,
including hacking libsa to allow lua to be built with only one change
outside luaconf.h.
Add the final bit of lua glue to bring in liblua and plug into the
multiple interpreter framework, previously committed.
Add LOADER_LUA option, currently off by default.
Presently, this is an experimental option. One must opt-in to using
this by defining WITH_LOADER_LUA and WITHOUT_FORTH. It's been
lightly tested, so keep a backup copy of your old loader handy.
The menu code, coming in the next commit, hasn't been exhaustively
tested. A LUA boot loader is 60k larger than a FORTH one, which is
80k larger than a no-interpreter one. Subtle changes in size
may tip things past some subtle limit (the binary is ~430k now
when built with LUA). A future version may offer coexistance.
Bump FreeBSD version to 1200058 to mark the milestone.
Pedro Souza's 2014 Summer of Code project. Rui Paulo, Pedro Arthur,
Zakary Nafziger and Wojciech A. Koszek also contributed. Warner Losh
reworked it extensively into its current form.
Obtained from: https://wiki.freebsd.org/SummerOfCode2014/LuaLoader
Sponsored by: Google Summer of Code
Relnotes: Yes
MFC After: 1 month
Differential Review: https://reviews.freebsd.org/D14295
