Makefile.inc has a specific meaning in the tree, and
common/Makefile.inc doesn't quite fit into that. Rename it to
loader.mk and it will be a place to collect common things to all
/boot/loader programs there.
Sponsored by: Netflix
always include it. Remove places where we explicitly include it. This
also helps reduce the 'cut-and-paste' factor of these Makefiles.
Sponsored by: Netflix
LIBSA is the current stand alone library. LIBSA32 is the 32-bit
version of the library. LIBSAU is the userboot version of libsa. Use
the proper define instead of the more generic define.
Sponsored by: Netflix
Define SASRC to point to the current libstand sources. Include
../Makefile.inc early enough in a few places so we can .include
"${SASRC}/Makefile" and have it work. Create a new pass-up
Makefile.inc in sys/boot/userboot to allow this pattern to work.
Sponsored by: Netflix
The work to make it possible to avoid bcache via using F_NORA modifier did
miss the fact that not all loader platforms are using the bcache, and so
it is possible the modifier is not cleared, as bcache strategy function is
not used.
For fix, we make sure the checks are dont with masked flag.
This patch does fix boot for platforms which do not use bcache.
Reported by: emaste
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D10422
The work to implement zfs reader to inspect all pool label copies did
miss the userboot, this update does correct this issue.
Since userboot is already using common/disk.c API (disk_open() etc),
the fix is quite simple - we only need to make sure the userdisk_iocl()
will call disk_ioctl(). In addition, the diskioctl callback does return
int, not pointer.
Note, the review request is actually addressing the sparc and userboot,
but as testing the fix for sparc will take some more time, I am posting the
userboot fix now.
This patch is part of the implementation presented in review:
https://reviews.freebsd.org/D10302
Once we have the sparc part tested, we will have the complete fix
for the issue.
Reviewed by: imp
In r315408, disk_cleanup was removed, which is called at
sys/boot/userboot/userboot/userboot_disk.c:113.
This causes bhyveload to fail.
PR: 217935
Reported by: Fabian Freyer
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D10060
As we provide the disk size verification and correction via disk_ioctl
and disk state provided by disk_open(), we can not share the partition
state in disk_devdesc structure. Also the sharing does make a lot of sense
with ufs, as only one partition is open at any given time, but zfs pools
do keep the disk devices open.
To make sure we do get the correct information about the open device,
just remove the cache.
Reviewed by: allanjude, smh
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9757
This is a minimal attempt to keep consistency in the Makefiles so that
moving ficl to somwehere like contrib will be less error prone.
MFC after: 1 week
Apparently the libstand dosfs optimization is a bit too optimistic
and did introduce possible memory corruption.
This patch is backing out the bad part and since this results in
dosfs reading full blocks now, we can also remove extra offset argument
from dv_strategy callback.
The analysis of the issue and the backout patch is provided by Mikhail Kupchik.
PR: 214423
Submitted by: Mikhail Kupchik
Reported by: Mikhail Kupchik
Reviewed by: bapt, allanjude
Approved by: allanjude (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8644
The Makefile rule to create vers.c for loader version info was
previously duplicated in each of the various loader Makefiles.
Instead, share a common rule in Makefile.inc.
Reviewed by: bapt
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8841
Instead of repeating "%s, Revision %s" "(%s %s)" in each loader, just
create the full version string in vers.c
Reviewed by: bapt
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8823
lsdev command does walk over devsw list, prints list element name and
will use dv_print() callback to print the device list.
Unfortunately this approach will add unneeded noise when there are no
particular devices detected.
To remove "empty" device section headers, the dv_print() callback
should print the header instead.
In addition, fixed dv_print callback for md module.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D8551
This change does modify devsw dv_print() to return the int value,
enabling walkers to interrupt the walk on non zero value from dv_print().
This will allow the pager_print actually to stop displaying data on
user input, and additionally pager is used in various *dev_print callbacks,
where it was missing.
For test, lsdev [-v] command should display data by screenfuls and should
stop when the key 'q' is pressed on pager prompt.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D5461
When tsoome@ added skein support to the ZFS boot code and zfsloader, it
resulted in an explosion in code size, running close to a number of
limits.
The default for the C version of skein is to unroll all loops for
skein-256 and 512
Disabling the loop unrolling saves 20-28kb from each binary
boot1.efi
gptzfsboot
loader.efi
userboot.so
zfsloader
Reviewed by: emaste, tsoome
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D7826
As the support for large blocks was enabled in loader zfs code, the
heap in userboot was left not changed, resulting with failure of detecting
and accessing zfs pools for bhyve virtual machines.
This fix does set the heap to use same amount of memory as the zfsloader
is using. To make it possible to test and verify loader functions, bhyve
is providing very useful option, but it also means, we like to keep feature
parity with [zfs]loader as close as possible.
PR: 212038
Reported by: dfh0522@gmail.com
Reviewed by: allanjude, grehan
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7635
Updated sha512 from illumos.
Using skein from freebsd crypto tree.
Since loader itself is using 64MB memory for heap, updated zfsboot to
use same, and this also allows to support zfs large blocks.
Note, adding additional features does increate zfsboot code, therefore
this update does increase zfsboot code to 128k, also I have ported gptldr.S
update to zfsldr.S to support 64k+ code.
With this update, boot1.efi has almost reached the current limit of the size
set for it, so one of the future patches for boot1.efi will need to
increase the limit.
Currently known missing zfs features in boot loader are edonr and gzip support.
Reviewed by: delphij, imp
Approved by: imp (mentor)
Obtained from: sha256.c update and skein_zfs.c stub from illumos.
Differential Revision: https://reviews.freebsd.org/D7418
The block cache implementation in loader has proven to be almost useless, and in worst case even slowing down the disk reads due to insufficient cache size and extra memory copy.
Also the current cache implementation does not cache reads from CDs, or work with zfs built on top of multiple disks.
Instead of an LRU, this code uses a simple hash (O(1) read from cache), and instead of a single global cache, a separate cache per block device.
The cache also implements limited read-ahead to increase performance.
To simplify read ahead management, the read ahead will not wrap over bcache end, so in worst case, single block physical read will be performed to fill the last block in bcache.
Booting from a virtual CD over IPMI:
0ms latency, before: 27 second, after: 7 seconds
60ms latency, before: over 12 minutes, after: under 5 minutes.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: delphij (previous version), emaste (previous version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4713
translate directly into calls to their namesake API functions in
libvmmapi.
It is an improvement over the existing setreg(), setmsr(), setcr()
setgdt() and exec() callbacks in that the new additions give full
control and don't assume we're booting FreeBSD, like exec() and
don't assume one only wants to set the value of RSP, like setreg().
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Add a few other safeguards to ensure things do not break when the
boot device cannot be determined
Reported by: flo
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
Userboot's copy of the libstand Makefile had more extensive changes
compared to the one in sys/boot/libstand32, but it turns out these are
not intentional and we can just include lib/libstand/Makefile as done
for libstand32 in r293040.
Reviewed by: imp, jhb
Tested by: allanjude
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4793
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
Go ahead and defined -D_STANDALONE for all targets (only strictly
needed for some architecture, but harmless on those it isn't required
for). Also add -msoft-float to all architectures uniformly rather
that higgley piggley like it is today.
Differential Revision: https://reviews.freebsd.org/D3496
Additionally, sort all real filesystems before the virtual ones.
Differential Revision: https://reviews.freebsd.org/D2709
Reviewed by: grehan
MFC after: 5 days
This should be a non-functional change. A future change should
address the functional differences between these three and converge
on a single source.
Differential Revision: https://reviews.freebsd.org/D2058
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
particular, allow loaders to define the name of the RC script the
interpreter needs to use. Use this new-found control to have the
PXE loader (when compiled with TFTP support and not NFS support)
read from ${bootfile}.4th, where ${bootfile} is the name of the
file fetched by the PXE firmware.
The normal startup process involves reading the following files:
1. /boot/boot.4th
2. /boot/loader.rc or alternatively /boot/boot.conf
When these come from a FreeBSD-defined file system, this is all
good. But when we boot over the network, subdirectories and fixed
file names are often painful to administrators and there's really
no way for them to change the behaviour of the loader.
Obtained from: Juniper Networks, Inc.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
This allows existing loader.conf files that set "console=comconsole"
to work without failing. No functional difference otherwise.
Reported by: Michael Dexter, pfSense install.
Reviewed by: neel
MFC after: 3 weeks
