HYPERVISOR_start_info is only available to PV and PVHv1 guests, HVM
and PVHv2 guests get this data from HVM parameters that are fetched
using a hypercall.
Instead provide a set of helper functions that should be used to fetch
this data. The helper functions have different implementations
depending on whether FreeBSD is running as PVHv1 or HVM/PVHv2 guest
type.
This helps to cleanup generic Xen code by removing quite a lot of
xen_pv_domain and xen_hvm_domain macro usages.
Sponsored by: Citrix Systems R&D
The user-space xenstore device is currently lacking a check to make
sure that the caller is only using transaction ids currently assigned
to it. This allows users of the xenstore device to hijack transactions
not started by them, although the scope is limited to transactions
started by the same domain.
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
Allow user-space applications to register watches using the xenstore
device. This is needed in order to run toolstack operations on
domains different than the one where xenstore is running (in which
case the device is not used, since the connection to xenstore is done
using a plain socket).
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
Due to the current synchronous xenstore implementation in FreeBSD, we
cannot return from xs_read_reply without reading a reply, or else the
ring gets out of sync and the next request will read the previous
reply and crash due to the type mismatch. A proper solution involves
making use of the req_id field in the message and allowing multiple
in-flight messages at the same time on the ring.
Remove the PCATCH flag so that signals don't interrupt the wait.
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
There's no need to prevent suspend while doing xenstore transactions,
callers of transactions are supposed to be prepared for a transaction
to fail.
This fixes a bug that could be triggered from the xenstore user-space
device, since starting a transaction from user-space would result in
returning there with a sx lock held, that causes a WITNESS check to
trigger.
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
Lock the xenstore request mutex when suspending user-space processes, in order
to prevent any process from holding this lock when going into suspension, or
else the xenstore suspend process is going to deadlock.
Submitted by: Liuyingdong <liuyingdong@huawei.com>
Reviewed by: royger
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9638
xen/hypervisor.h:
- Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain,
is_running_on_xen
- Remove unused define CONFIG_X86_PAE
- Remove unused variable xen_start_info: note that it's used inpcifront
which is not built at all
- Remove forward declaration of HYPERVISOR_crash
xen/xen-os.h:
- Remove unused define CONFIG_X86_PAE
- Drop unused helpers: test_and_clear_bit, clear_bit,
force_evtchn_callback
- Implement a generic version (based on ofed/include/linux/bitops.h) of
set_bit and test_bit and prefix them by xen_ to avoid any use by other
code than Xen. Note that It would be worth to investigate a generic
implementation in FreeBSD.
- Replace barrier() by __compiler_membar()
- Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop
= pause
xen/xen_intr.h:
- Move the prototype of xen_intr_handle_upcall in it: Use by all the
platform
x86/xen/xen_intr.c:
- Use BITSET* for the enabledbits: Avoid to use custom helpers
- test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit
- Don't export the variable xen_intr_pcpu
dev/xen/blkback/blkback.c:
- Fix the string format when XBB_DEBUG is enabled: host_addr is typed
uint64_t
dev/xen/balloon/balloon.c:
- Remove set but not used variable
- Use the correct type for frame_list: xen_pfn_t represents the frame
number on any architecture
dev/xen/control/control.c:
- Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback
means the driver can handle this device. If by any chance xenstore is the
first driver, every new device with the driver is unset will use
xenstore.
dev/xen/grant-table/grant_table.c:
- Remove unused cmpxchg
- Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't
contain anything required for the code on x86
dev/xen/netfront/netfront.c:
- Use the correct type for rx_pfn_array: xen_pfn_t represents the frame
number on any architecture
dev/xen/netback/netback.c:
- Use the correct type for gmfn: xen_pfn_t represents the frame number on
any architecture
dev/xen/xenstore/xenstore.c:
- Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback
means the driver can handle this device. If by any chance xenstore is the
first driver, every new device with the driver is unset will use xenstore.
Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore
arch-specific code. Although, a new series will add some helpers that differ
between x86 and ARM64, so I've kept the headers for now.
Submitted by: Julien Grall <julien.grall@citrix.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D3921
Sponsored by: Citrix Systems R&D
Xenstore user-space device has two problems currently:
- It does not correctly handle concurrent clients, because it's storing
each client data in dev->si_drv1.
- It does not correctly free this data when the client closes the device.
In order to solve both of this issues store the per-client data using
cdevpriv, which also comes with a hook in order to perform the necessary
cleanup on device close.
While there also make the device eternal.
Sponsored by: Citrix Systems R&D
Reported and Tested by: thompsa
MFC after: 2 weeks
This device is used by the user-space daemon that runs xenstore
(xenstored). It allows xenstored to map the xenstore memory page, and
reports the event channel xenstore is using.
Sponsored by: Citrix Systems R&D
dev/xen/xenstore/xenstored_dev.c:
- Add the xenstored character device that's used to map the xenstore
memory into user-space, and to report the event channel used by
xenstore.
conf/files:
- Add the device to the build process.
Convert the xenstore user-space device (/dev/xen/xenstore) to a device
using the newbus interface. This allows us to make the device
initialization dependant on the initialization of xenstore itself in
the kernel.
Sponsored by: Citrix Systems R&D
dev/xen/xenstore/xenstore.c:
- Convert to a newbus device, this removes the xs_dev_init function.
xen/xenstore/xenstore_internal.h:
- Remove xs_dev_init prototype.
dev/xen/xenstore/xenstore.c:
- Don't call xs_dev_init anymore, the device will attach itself when
xenstore is started.
The xenstore related devices in the kernel cannot be started until
xenstored is running, which will happen later in the Dom0 case. If
start_info_t doesn't contain a valid xenstore event channel, defer all
xenstore related devices attachment to later.
Sponsored by: Citrix Systems R&D
dev/xen/xenstore/xenstore.c:
- Prevent xenstore from trying to attach it's descendant devices if
xenstore is not initialized.
- Add a callback in the xenstore interrupt filter that will trigger
the plug of xenstore descendant devices on the first received
interrupt. This interrupt is generated when xenstored attaches to
the event channel, and serves as a notification that xenstored is
running.
Move xenstore related devices (xenstore.c and xenstore_dev.c) from
xen/xenstore to dev/xen/xenstore. This is just code motion, no
functional changes.
Sponsored by: Citrix Systems R&D
