Commit Graph

12 Commits

Author SHA1 Message Date
George V. Neville-Neil
c9c0c99f30 Bug fix from Chelsio which addresses the issue of the device resetting
when it sees only received packets.  In some cases where a device only
recieves data it mistakenly thinks that its transmitting side is broken
and resets the device.

Obtained from:	Chelsio Inc.
MFC after:	3 days
2008-12-02 15:42:47 +00:00
Kip Macy
79775f8f1b Update cxgb include paths to not require prefixing with dev/cxgb
Submitted by:	Chelsio Inc.
2008-09-23 03:16:54 +00:00
Kip Macy
9b4de886f9 Vendor fix for PHY problem.
Obtained from:	Chelsio Inc.
MFC after:	3 days
2008-08-11 23:01:34 +00:00
Kip Macy
4af83c8cff import vendor fixes to cxgb 2008-07-18 06:12:31 +00:00
Kip Macy
8e10660f12 - update firmware to 5.0
- add support for T3C
- add DDP support (zero-copy receive)
- fix TOE transmit of large requests
- fix shutdown so that sockets don't remain in CLOSING state indefinitely
- register listeners when an interface is brought up after tom is loaded
- fix setting of multicast filter
- enable link at device attach
- exit tick handler if shutdown is in progress
- add helper for logging TCB
- add sysctls for dumping transmit queues

- note that TOE wxill not be MFC'd until after 7.0 has been finalized

MFC after: 3 days
2008-02-23 01:06:17 +00:00
Kip Macy
5c5df3da16 - fix qset to port binding as a proper fix for the problems encountered on the 4-port
- fix the use after free seen when sending packets small enough to fit as an immediate
   and bpf peers are present
 - update to firmware rev 4.7 along with various small vendor fixes

Supported by: Chelsio
Approved by: re (blanket)
MFC after: 3 days
2007-09-09 01:28:03 +00:00
Kip Macy
ac3a6d9cef - integrate most recent changes from vendor branch and upgrade to firmware revision 4.5.5
- add filter support
	- further improvements for T304
- recover gracefully from spurious immediate packets

Approved by: re(blanket)
Supported by: Chelsio
MFC after: 3 days
2007-07-17 06:50:35 +00:00
Kip Macy
ef72318f0e - import new common code for the T304
- update to firmware version 4.1.0

- switch over to standard method for initializing cdevs (contributed by scottl@)
- break out timer_reclaim_task to be per-port
- move msix teardown into separate function
- fix bus_setup_intr for msi-x for the multi-port case so that msi-x resources
  are not corrupted on unload
- handle 10/100/1000 base-T media and auto negotiation
- bind qset to cpu even for singleq case
- white space cleanups
- remove recursive PORT_LOCK
- move mtu setting to separate function
- stop and re-init port when changing mtu
- replace all direct references to m_data with calls to mtod
- handle attach failure better by not trying to de-initialize
  taskqueues when they have not been allocated
- no longer default to jumbo frames

Sponsored by: Chelsio
MFC after: 3 days
2007-06-13 05:36:00 +00:00
Kip Macy
10faa56870 When building cxgb as a module make include paths relative to the driver's root.
This will make it possible to build the module out of tree against an older src tree.

MFC after: 3 days
2007-05-28 22:57:27 +00:00
Kip Macy
d722cab49a (MFp4)
- upgrade to reflect state of 1.0.0.86
        - move from firmware rev 3.2 to 4.0.0
        - import driver bits for offload functionality
	- remove binary distribution clause from top level files as it
	  runs counter to the intent of purely supporting the hardware

MFC after: 3 days
2007-05-25 09:48:20 +00:00
Kip Macy
577e9bbe3e Synchronize with version 1.0.071 of Chelsio's common code
(with the notable exception of improvements for using multiple TX queues)

This adds support for the T3B2 ASIC rev

Obtained from: Chelsio
MFC after: 3 days
2007-03-20 21:43:32 +00:00
Kip Macy
b6d90eb779 First of several commits for driver support for the Chelsio T3B 10 Gigabit
Ethernet adapter.

Reviewed by: scottl, sam

For those interested in the preliminary performance work see below.

Plots of mxge vs. cxgb running netpipe:

blocksize vs. bandwidth:
http://www.fsmware.com/chelsio.random/bsvsbw.gif

blocksize vs. RTT:
First of several commits for driver support for the Chelsio T3B 10 Gigabit
Ethernet adapter.

Reviewed by: scottl, sam

For those interested in the preliminary performance work see below.

Plots of mxge vs. cxgb running netpipe:

blocksize vs. bandwidth:
http://www.fsmware.com/chelsio.random/bsvsbw.gif

blocksize vs. RTT:
http://www.fsmware.com/chelsio.random/bsvstime.gif

blocksize vs. RTT for block sizes <= 10kb:
http://www.fsmware.com/chelsio.random/bsvstime_10kb.gif
http://www.fsmware.com/chelsio.random/bsvstime_10kb3.gif
2007-03-14 02:37:44 +00:00