Commit Graph

24 Commits

Author SHA1 Message Date
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Alexander Motin
21cc85878c MFp4:
If we panicked with SIM lock held, do not try to flush caches.
Extra lock recursing will not make debugging easier.
2009-12-06 11:48:53 +00:00
Alexander Motin
efa575b6be MFp4:
- Remove CAM_PERIPH_POLLED flag. It is broken by design. Polling can't be
periph flag. May be SIM, may be CCB, but now it works fine just without it.
- Remove check unused for at least five years. If we will ever have non-BIO
devices in CAM, this check is smallest of what we will need.
- If several controllers complete requests same time, call swi_sched()
only once.
2009-11-04 15:40:19 +00:00
Alexander Motin
1e637ba677 MFp4:
- Reduce code duplication in ATA XPT and PMP driver.
- Move PIO size setting from ada driver to ATA XPT. It is XPT business
to negotiate transfer details. ada driver is now stateless.
- Report PIO size to SIM. It is required for correct PATA SIM operation.
- Tune PMP scan timings. It workarounds some problems with SiI.
- If reset hapens during PMP initialization - restart it.
- Introduce early-initialized periph drivers, which are used during initial
scan process. Use it for xpt, probe, aprobe and pmp. It gives pmp chance
to finish scan before mountroot and numerate devices in right order.
2009-10-31 10:43:38 +00:00
Scott Long
571e8e20da Change cam_periph_ioctl() to take 'cmd' and a u_long instead of an
int.  All of its callers pass in cmd as a u_long, so this has
always been a dangerous type demotion.  It was spooted by clang/llvm
trying to do a type promotion and sign extension within
cam_periph_ioctl.

Submitted by:	rdivacky
2009-06-22 14:43:48 +00:00
Edward Tomasz Napierala
24ebf56636 Periph driver fixes, second try.
Reviewed by:	scottl
Approved by:	rwatson (mentor)
Sponsored by:	FreeBSD Foundation
2008-12-19 14:31:40 +00:00
Scott Long
11e4face2d Inline cam_periph_lock|unlock to make debugging easier. Use more
CAM_SIM_LOCK() more uniformly.
2007-04-19 22:46:26 +00:00
Scott Long
2b83592fdc Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM will
use to synchornize and protect all data objects that are used for that
SIM.  Drivers that are not yet MPSAFE register Giant and operate as
usual.  RIght now, no drivers are MPSAFE, though a few will be changed
in the coming week as this work settles down.

The driver API has changed, so all CAM drivers will need to be recompiled.
The userland API has not changed, so tools like camcontrol do not need to
be recompiled.
2007-04-15 08:49:19 +00:00
Warner Losh
898b0535b7 Start each of the license/copyright comments with /*- 2005-01-05 22:34:37 +00:00
Scott Long
2e8f0ae68c Remove the camnet swi and CAM_PERIPH_NET. It has never been used, and given
that netowrk-over-scsi never really took off, there is little chance that
it will ever be needed.
2004-10-05 04:22:20 +00:00
Poul-Henning Kamp
3e019deaed Do a pass over all modules in the kernel and make them return EOPNOTSUPP
for unknown events.

A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
2004-07-15 08:26:07 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
Peter Wemm
0b7c27b904 Change the peripheral driver list from a linker set to module driven
driver registration.  This should allow things like da, sa, cd etc to be
in seperate KLD's to the cam core and make them preloadable.
2001-02-07 07:05:59 +00:00
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
Nick Hibma
9a1c8571c7 *sigh* I must have been on something that night. Make xpt_periph an
extern with the original in cam_xpt.c instead of replicating
xpt_periph in all the sources using it (and hence not initialising it)
2000-05-07 18:04:50 +00:00
Nick Hibma
540d9130cc Add a hack to cam that makes the cam_xpt available to the rest of the
kernel. Justin agress that there is no other reasonable alternative to
do automatic rescans on connect.

The problem is that when a new device attaches to a SIM (SCSI host
controller) we need to send a XPT_SCAN_BUS command to the SIM using
xpt_action. This requires however that there is a peripheral available
to take the command (otherwise xpt_done and later bomb). The RESCAN
ioctl uses the same periph.

This enables a USB mass storage drive to do an automatic rescan on
connection of the drive.

The automatic dropping of a CAM entry on disconnection was already
working (asynchronous event).

The next thing to do is find someone to commit a change to vpo to do the
same thing. Just port umass_cam_rescan and friends across to that
driver.

Approved by:   gibbs
2000-04-03 11:11:12 +00:00
Nick Hibma
0cdabce076 Various typo's.
One minor nit. The speed was displayed wrong when below 1Mb/s.
2000-03-15 21:55:48 +00:00
Peter Wemm
c447342094 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 05:07:58 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Justin T. Gibbs
87cfaf0e1f Add the XPT_PATH_STATS and XPT_GDEV_STATS function codes. These ccb
types allow the reporting of error counts and other statistics.  Currently
we provide information on the last BDR or bus reset as well as active
transaction inforamtion, but this will be expanded as more information is
added to aid in error recovery.

Use the 'last reset' information to better handle bus settle delays.
Peripheral drivers now control whether a bus settle delay occurs and
for how long.  This allows target mode peripheral drivers to avoid
having their device queue frozen by the XPT for what shoudl only be
initiator type behavior.

Don't perform a bus reset if the target device is incapable of performing
transfer negotiation (e.g. Fiber Channel).

If we don't perform a bus reset but the controller is capable of transfer
negotiations, force negotiations on the first transaction to go to the
device.  This ensures that we aren't tripped up by a left over negotiation
from the prom, BIOS, loader, etc.

Add a default async handler funstion to cam_periph.c to remove duplicated
code in all initiator type peripheral drivers.

Allow mapping of XPT_CONT_TARGET_IO ccbs from userland.  They are
itentical to XPT_SCSI_IO ccbs as far as data mapping is concerned.
1999-05-22 21:58:47 +00:00
Kenneth D. Merry
ee9c90c75c Fix a problem with the way we handled device invalidation when attaching
to a device failed.

In theory, the same steps that happen when we get an AC_LOST_DEVICE async
notification should have been taken when a driver fails to attach.  In
practice, that wasn't the case.

This only affected the da, cd and ch drivers, but the fix affects all
peripheral drivers.

There were several possible problems:
 - In the da driver, we didn't remove the peripheral's softc from the da
   driver's linked list of softcs.  Once the peripheral and softc got
   removed, we'd get a kernel panic the next time the timeout routine
   called dasendorderedtag().
 - In the da, cd and possibly ch drivers, we didn't remove the
   peripheral's devstat structure from the devstat queue.  Once the
   peripheral and softc were removed, this could cause a panic if anyone
   tried to access device statistics.  (one component of the linked list
   wouldn't exist anymore)
 - In the cd driver, we didn't take the peripheral off the changer run
   queue if it was scheduled to run.  In practice, it's highly unlikely,
   and maybe impossible that the peripheral would have been on the
   changer run queue at that stage of the probe process.

The fix is:
 - Add a new peripheral callback function (the "oninvalidate" function)
   that is called the first time cam_periph_invalidate() is called for a
   peripheral.

 - Create new foooninvalidate() routines for each peripheral driver.  This
   routine is always called at splsoftcam(), and contains all the stuff
   that used to be in the AC_LOST_DEVICE case of the async callback
   handler.

 - Move the devstat cleanup call to the destructor/cleanup routines, since
   some of the drivers do I/O in their close routines.

 - Make sure that when we're flushing the buffer queue, we traverse it at
   splbio().

 - Add a check for the invalid flag in the pt driver's open routine.

Reviewed by:	gibbs
1998-10-22 22:16:56 +00:00
Kenneth D. Merry
60a899a075 Fix a bug in the error recovery code. It was possible to have more than
one error recovery action oustanding for a given peripheral.

This is bad for several reasons.  The first problem is that the error
recovery actions would likely be to fix the same problem.  (e.g., we
queue 5 CCBs to a disk, and the first one comes back with 0x04,0x02.  We
start error recovery, and the second one comes back with the same status.
Then the third one comes back, and so on.  Each one causes the drive to get
nailed with a start unit, when we really only need one.)

The other problem is that we only have space to store one CCB while we're
doing error recovery.  The subsequent error recovery actions that got
started were over-writing the CCBs from previous error recovery actions,
but we still tried to call the done routine N times for N error recovery
actions.  Each call to dadone() was done with the same CCB, though.  So on
the second one, we got a "biodone: buffer not busy" panic, since the buffer
in question had already been through biodone().

In any case, this fixes things so that any any given time, there's only one
error recovery action outstanding for any given peripheral driver.

Reviewed by:	gibbs
Reported by:	Philippe Regnauld <regnauld@deepo.prosa.dk>
[ Philippe wins the "bug finder of the week" award ]
1998-10-13 21:41:32 +00:00
Justin T. Gibbs
8b8a9b1d3e CAM Transport Layer (XPT).
Submitted by:	The CAM Team
1998-09-15 06:33:23 +00:00