- bzipfs and gzipfs now properly return errno values directly from their
read routines rather than returning -1.
- missing errno values on error returns for the seek routines on almost
all filesystems were added.
- fstat() now returns -1 if an error occurs rather than ignoring it.
- nfs's readdir() routine now reports valid errno values if an error or
EOF occurs rather than EPERM (It was just returning 0 for success and
1 for failure).
- nullfs used the wrong semantics for every function besides close() and
seek(). Getting it right for close() appears to be an accident at that.
- read() for buffered files no longer returns 0 (EOF) if an error occurs,
but returns -1 instead.
associated floppy if needed into a static split_openfile() function.
- Use this function in splitfs_open() to open the first chunk rather
than using open() directly. This allows the first chunk to be located
on a different disk than the actual foo.split file.
file in the NFS file system when the underlying device is not a
network device. A Sparc64 specific hack for this exact problem was
already present (nfs.c:1.9, tftp.c:1.10), but the problem is not
specific to Sparc64. The hack has been promoted to a non-i386 test
because on non-i386 architectures it's either impossible to have
non-network devices coexist in the same loader with the NFS FS, or
network and non-network device coexist and NFS filesystems can only
be used on top of network devices. I believe i386 pxeboot is where
this does not hold.
The root cause of this problem is in open.c where each file system
is tried until no more file systems exist or a file system returns
success. There's no notion of a list of valid file systems given
the underlying device and the non-existence of a file can cause
the invalid combination to be tried.
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
info. This turned out to be rather useful on ia64 for tracking down
malloc/free problems.
Detect duplicate free()'s - otherwise these show up as a guard1 failure
and it looks like corruption instead of something simple like a second
free() where there shouldn't be.
Deal with libz using libc headers and not seeing the malloc/free stuff that
we provide in libstand. Do similar nastiness to what is done for bzlib.
Tested on: i386, ia64 (compile, run)
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
modules split across several physical medias. Following is how it works:
The splitfs code, when asked to open "foo" looks for a file "foo.split"
which is a text file containing a list of filenames and media names, e.g.
foo.aa "Kernel floppy 1"
foo.ab "Kernel floppy 2"
foo.ac "Kernel and modules floppy"
For each file segment, the process is:
- try to open the file
- prompt "Insert the disk labelled <whatever> and press any key..."
- try to open the file
- return error if file could not be located
RE team is free to use this feature in the upcoming 5.0-DP1.
Reviewed by: msmith, dcs
o In i386's <machine/endian.h>, macros have some advantages over
inlines, so change some inlines to macros.
o In i386's <machine/endian.h>, ungarbage collect word_swap_int()
(previously __uint16_swap_uint32), it has some uses on i386's with
PDP endianness.
Submitted by: bde
o Move a comment up in <machine/endian.h> that was accidentially moved
down a few revisions ago.
o Reenable userland's use of optimized inline-asm versions of
byteorder(3) functions.
o Fix ordering of prototypes vs. redefinition of byteorder(3)
functions, so that the non-GCC (libc asm) case has proper
prototypes.
o Add proper prototypes for byteorder(3) functions in <sys/param.h>.
o Prevent redundant duplicate prototypes by making use of the
_BYTEORDER_PROTOTYPED define.
o Move the bswap16(), bswap32(), bswap64() C functions into MD space
for platforms in which asm versions don't exist. This significantly
reduces the complexity of some things at the cost of duplicate code.
Reviewed by: bde
device drivers for bus system with other endinesses than the CPU (using
interfaces compatible to NetBSD):
- bwap16() and bswap32(). These have optimized implementations on some
architectures; for those that don't, there exist generic implementations.
- macros to convert from a certain byte order to host byte order and vice
versa, using a naming scheme like le16toh(), htole16().
These are implemented using the bswap functions.
- stream bus space access functions, which do not perform a byte order
conversion (while the normal access functions would if the bus endianess
differs from the CPU endianess).
htons(), htonl(), ntohs() and ntohl() are implemented using the new
functions above for kernel usage. None of the above interfaces is currently
exported to user land.
Make use of the new functions in a few places where local implementations
of the same functionality existed.
Reviewed by: mike, bde
Tested on alpha by: mike
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
driver in libstand. This specifically does not expand or truncate files
since the filesystem may be dirty or inconsistent.
PR: kern/32389
Submitted by: Jonathan Mini <mini@haikugeek.com>
Sponsored by: ClickArray, Inc.
new flags: F_ROOTDIR and F_RR (Rock Ridge present).
- Cache the SUSP LEN_SKP parameter in struct file as well.
- If we open() '/', then force a read of the directory's contents so we
can examine the directory record of '.' to see if Rock Ridge is present.
- If Rock Ridge extensions are present, lookup Rock Ridge names in
readdir().
kernels. The error message was "elf_loadexec: cannot seek".
Libstand maintains a read-ahead buffer for each open file, so that
it can read in chunks of 512 bytes for greater efficiency. When
the loader tries to lseek forward in a file by a small amount, it
sometimes happens that the target file offset is already in the
read-ahead buffer. But the lseek code simply discarded the contents
of that buffer and performed a seek directly on the underlying
file. This resulted in an attempt to seek backwards in the file,
since some of the data has already been read into the read-ahead
buffer. Gzipped data streams cannot seek backwards, so an error
was returned.
This commit adds code which checks to see if the desired file offset
is already in the read-ahead buffer. If it is, the code simply
adjusts the buffer pointer and length, thereby avoiding a reverse
seek on the gzipped data stream.
I incorporated a suggestion from Matt Dillon which saved a little
bit of code in this fix.
Reviewed by: dillon, gallatin, jhb
Certain ISO fs's (like the one for 4.4-RC1 disc1 on alpha)
trigger this, and we end up opening a null file name. This causes us to get
a false match for "kernel.ko" when it does not exist.
member f_devdata to be a pointer to a socket number. When currdev
is "pxe", that assumption is correct. When currdev is "disk*", that
assumption is incorrect.
Submitted by: Jim Browne <jbrowne@jbrowne.com>
The test for failing the end guard was always triggering (and was reported as
such in compiler warnings). This is a temporary band-aid until I can work
out what's really going on.
Reviewed by: obrien
the efficiency of byte-by-byte read operations on filesystems not already
supported by the block cache (especially NFS).
This should be a welcome change for users booting via PXE, as the loader
now reads its startup files almost instantly, instead of taking tens of
seconds.
identifier to the DHCP server. Now you can check for this string
in your dhcp configuration to decide whether you will hand out a
lease to the client or not.
was not the fault of the module code, nor FICL. The malloc code requires
sbrk() to return addresses that were at least 16 byte aligned. If the
Alpha loader happened to be 8 byte but not 16 byte aligned in length, then
you would get a zfree() panic at startup.
Incidently, this affected the i386 loader as well, and explains why
the static heap changed things and why jlemon had trouble when the bss
was not ending at a multiple of 8 bytes.
My fix is to 16 byte align it on all arches, even though the x86 version
only required 8 byte alignment (struct MemNode is smaller there). We could
page align it if we wanted to be paranoid, but it isn't presently necessary.
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
Fix some ctype problems - isascii() caused a warning if fed an unsigned
char - it's always > 0 and libstand is compiled with -Wall.
Missing prototype/include in printf.c
o use braces to avoid potentially ambiguous else
o don't default to type int (and also remove a useless register
modifier).
o Use parens around assignment values used as truth values.
o Remove unused function.
Reviewed by: obrien and chuckr
of getopt (as in, multiple input lines :). This is documented in the
man page and is used in the code, but unistd.h and stand.h do not
declare it. Incidentally, it prevents me fixing a bug in loader's
code... :-)
PR: misc/9373
Submitted by: "Daniel C. Sobral" <dcs@newsguy.com>
in libstand, only for i386 until I locate an alpha setjmp/longjmp.
Minimal 64-bit gcc integer support for i386. This is kinda nasty, and
should be revisited once we decide whether the bootblocks need
quad arithmetic.
etc. associated with the device entry.
Consider EOF an 'error' for fgetstr if we haven't read anything yet.
You *MUST* recompile and reinstall libstand before rebuilding the bootstrap.
disks.
* Fix a whole raft of warnings, printf and otherwise.
* Make zalloc work for alpha (just a case of using the right typedef).
* Add some (disabled) malloc debug printing to stand.h.
compact and much better one donated by Matt Dillon. Implement a simple
sbrk() which uses the existing setheap() api.
Remove the custom allocator from the UFS code. It wasn't working quite
right, and it shouldn't be needed with the new allocator.
Fix a serious problem with changing the value of already-existent
environment variables. Don't attempt to modify the supposedly-const
argument to putenv()
Fix an off-by-one sizing error in the zipfs code detected by the new
allocator.
Submitted by: zmalloc from Matt Dillon <dillon@backplane.com>
