Commit Graph

1345 Commits

Author SHA1 Message Date
Andreas Schulz
fadc21ae39 Fixed the error that a Fdopen succeeds without a found fd controller in
the system.
1993-12-04 16:13:18 +00:00
Andrew Moore
16111ced9f Reset fdc during probe.
From: <dec@lazarus.nrtc.northrop.com>
   Changes between EPSILON and RELEASE of FreeBSD have again caused
the kernel to not see my floppy disk drives.  I don't know what happened,
'cause I don't see any changes to fd.c, but here is an old fix that
I have applied to the probe routine which will solve the problem (at
least for me).  Since this is a rather brute-force solution - I understand
if you want to ignore it...

[Upgrading to pre-Beta FreeBSD caused this on my system. -AM]
1993-12-03 05:01:40 +00:00
Rich Murphey
23fc1c7148 Fix conflicting prototypes and return values. 1993-11-27 06:32:41 +00:00
Garrett Wollman
381fe1aaf4 Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and
add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Christoph Robitschko
5a0cfe828a Changed return(-1) in switch_scr to return(EINVAL), because -1 is
ERESTART on return from a system call.
1993-11-23 18:20:52 +00:00
Andrey A. Chernov
aa0028f8cf Fix attach message, make separate line for it
(old version assumed that line is probe line)
1993-11-17 23:38:23 +00:00
Andrey A. Chernov
0d04ba084f New sio driver from Bruce. 1993-11-14 23:29:01 +00:00
Andrey A. Chernov
fe04cbf968 Add missing read flush code to siostop 1993-11-08 19:36:32 +00:00
Garrett Wollman
13c0dce671 Made all header files idempotent and moved incorrect common data from
headers into a related source file.  Also fixed a bug in ed_probe() where
it was possible to fall off the end of the function
1993-11-07 17:44:34 +00:00
Andrey A. Chernov
03d24cbca4 DST offset calculation removed, it is wrong in any case. 1993-11-04 01:56:31 +00:00
Andrey A. Chernov
743eb022be Russian keymap (RUKEYMAP) changes:
New syscons keys added: NEXT, DBG, RBT
AltGr Shift removed from right Alt
Shift state on -,+ keys exchanged
1993-11-04 01:49:20 +00:00
Jordan K. Hubbard
9afdb1976e Now that STAR_SAVER and SNAKE_SAVER are kernel options, add code
to make sure that bad things don't happen if both are (incorrectly)
defined at once.
1993-10-31 00:19:01 +00:00
Jordan K. Hubbard
faa78b5f58 Fixed bug where syscons.c wouldn't compile if DDB was enabled.
Removed FAT_CURSOR and STAR_SAVER as compiled in defaults - these should
be kernel options!
1993-10-31 00:09:02 +00:00
Rodney W. Grimes
2110b1cd9d Put back the $Id$ strings 1993-10-28 06:15:14 +00:00
Jordan K. Hubbard
33853f9752 This is syscons version 1.1 1993-10-28 05:27:36 +00:00
Jordan K. Hubbard
538430ae1a Patch from stever@csuohio.edu (Steve Ratliff) to make FAT_CURSOR work
on HDA/CGA displays.
1993-10-18 02:19:54 +00:00
Rodney W. Grimes
dd05fde699 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 19:17:18 +00:00
Rodney W. Grimes
6f78ca6026 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 13:48:52 +00:00
David Greenman
cc44412791 Disassociate DTR and RTS. They were coupled together and shouldn't have
been. This was necessary to work around problems with some equipment
that don't respond favorably to having these both dropped simultaneously.
1993-10-14 09:13:54 +00:00
Rodney W. Grimes
b05fb556cf Use KERNBASE for locating stuff in kernel virtual memory, not hard coded
constants.
1993-10-12 06:59:36 +00:00
David Greenman
357eebce38 incorporated patches from Marc Frajola (marc@escargot.rain.com) to
unset TS_TBLOCK when the RBLEN falls below the low water mark.
1993-10-12 06:32:28 +00:00
Jordan K. Hubbard
11851b0ee1 Removed FAT_CURSOR as default since it breaks certain CGA displays
and it is better to conform to the lowest common denominator.
Those wishing to retain it can always use options FAT_CURSOR in
their config files.
1993-10-08 21:21:59 +00:00
Jordan K. Hubbard
bd41f6854b Latest changs for XFree86 2.0 1993-10-04 22:23:03 +00:00
Rodney W. Grimes
380888c9fa Change #include <sys/console.h> to <machine/console.h>, file will be moved
shortly
1993-09-30 23:59:49 +00:00
Jordan K. Hubbard
0e583a0138 From: "Andrew A. Chernov, Black Mage" <ache@astral.msk.su>
AltGr Lock code for zero repeat count ommited, so AltGr Lock
works only one time and never again :-)
1993-09-29 00:42:10 +00:00
Jordan K. Hubbard
b5275b8103 Version number support for XFree86 1993-09-28 20:53:48 +00:00
Jordan K. Hubbard
fae56ff15f Change to sio for recognising the last serial port on a multiport
card correctly.

Updated syscons to 0.2e, added features for upcoming XFree86 2.0,
fixed crashbug.
1993-09-28 00:01:18 +00:00
Rodney W. Grimes
92ed385a09 >From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 01:35:10 +1000
Julian writes:

>In fact DEVIDLE and FINDWORK ended up being basically equivalent.
>the bit I wonder about, is the returning of 0.. What (other than
>another request from somewhere else in the kernel) is going to start
>work on the next item on the queue?

I think removing FINDWORK would make things clearer.

Nothing much is going to start work on the next item.  However, it is
pointless to continue processing the queue for the same unready drive.
Aborting all reads and trying harder to perform all writes would be
better.
Julian writes.

> no, actually it should be:
> fdt = fd_data[FDUNIT(minor(dev))].ft;

Fixed.
From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 22:56:01 +1000
The fd driver reported the wrong cylinder/head/sector numbers after an
error (ST3 is only valid after a sense-drive command), and didn't report
fs block numbers (diskerr was not used).

There was an old problem with writes to block fd devices.   Try this:

1. write protect floppy in fd0.
2. tar cf /dev/fd0a /dev/null.  Repeat a few times.  Later writes tend to
   terminate earlier.
   3. un-write protect floppy.
   4. repeat step 2.  The writes tend to return 0, 2048, 4096, ... and then
      succeed.

This was caused by a bug in vfs__bios.c.  (The bug is fixed in NetBSD's
vfs_bio.c.)  fd.c sets bp->b_resid to nonzero after an error.  vfs__bios.c
was not initializing bp->b_resid.  This causes some writes to terminate
early (e.g., writes to block devices; see spec_write()).

Related funnies:

1. Nothing tries to write the residual bytes.
2. The wd driver sets bp->b_resid to 0 after an error, so there's no
   way anything else could write the residual bytes.
3. I use the block fd device for tar because the raw device seemed to
   have more bugs long ago, and because it ought to be able to handle
   buffering more transparently (I don't want to have to know the
   device size).  But spec_write() always uses the size BLKDEV_IOSIZE
   == 2048 which is too small.  For disks it should use the size of
   one track (rounded down to meet the next track boundary or the i/o
   size).  Here it would help if the DIOCGPART ioctl worked.  But
   DIOCGPART is not implemented for floppies, and the disk size is
   ignored except for partitions of type FS_BSDFFS.

Bruce
1993-09-23 15:22:57 +00:00
Rodney W. Grimes
dc4ff321f2 Removed $Log$ section and patch kit headers. And here is the full
message for Bruces changes:

>From: bde@kralizec.zeta.org.au (Bruce Evans)
>Subject: fixes for fd driver

I think I've fixed some bugs in the 0.2.4 fd driver.

1. The main cause of hangs was that there was no timeout for seeks.  So
   attempting i/o with no floppy in the drive hung iff a seek was required.

2. Opens of unattached drives were allowed.  The kernel usually paniced
   soon after due to a bad pointer.

3. Some timeout functions ran at splclock() instead of splbio().  This
   may not have mattered.

4. The state machine was left in a funny state after a timeout.

5. Some function headers were new-style.

6. I picked up some code posted the other day to implement label ioctls.
   Now `disklabel fd0' works.  See a comment for how to modify conf.c.
1993-09-15 23:27:45 +00:00
Rodney W. Grimes
02aa90d831 >From: paul@u.tvt.se (Paul Pries)
>Subject: Bad bug in kbdtables.h [FreeBSD]

I found a bug in /sys/i386/isa/kbdtables.h which contain the
different keyboard layouts for syscons.  This regards all tables exept
the Danish and US.  When compiling the kernel with any other keymapping
than Danish or none at all (US), you get an error that 'key_map' is undefined.
This is because there is a typo in the name of the struct containing
the tables, keymap intead of key_map.
1993-09-15 23:03:21 +00:00
Jordan K. Hubbard
f5f7ba035f Bruce's multifarious patches for the floppy driver (not well tested, but
since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Rodney W. Grimes
e793dbb026 From guido@gvr.win.tue.nl Wed Sep 8 13:34:16 1993
That is because TIOCMGET was broken. Yes...this is known for some time
and no, we (Bruce and me) never posted it. Why? Simply because we choose
to post fixes when we fixed most of the bugs.

Anyway..now that the slip problems are coming, here is a fix for
correct TIOCMGET behaviour.

-Guido
Note: this should be tested first (Rich?).  Tested by rgrimes
1993-09-10 16:59:16 +00:00
Jordan K. Hubbard
cc4dfeaaa0 Soren's latest syscons changes. 1993-09-08 22:11:48 +00:00
Rodney W. Grimes
bfdbfb98fd From michaele@vice.ico.tek.com Wed Sep 8 09:50:45 1993
Subject: Re: Some small errors in GAMMA
4.      Move printf("\n"); at line 491 in "/sys/i386/isa/sio.c" to after
        COM_MULTIPORT block at line 512.
From rgrimes:
The above would cause the word (multiport) with out a new line to
appear after the uart type message if you had COM_MULTIPORT enabled.
1993-09-08 17:38:05 +00:00
Rodney W. Grimes
4ada418a9b Replaced the return (1)'s with return (IO_KBDSIZE) in the probe code so
that the printfs during the probing prints the range instead of just the
start address.
1993-08-28 13:26:30 +00:00
Rodney W. Grimes
89bc97311a xxxprobe now returns the correct number of I/O registers used so that
the probe output during boot gives the I/O range instead of just the
starting address
1993-08-28 03:02:52 +00:00
Rodney W. Grimes
3c742f974a Added from: line to reference the pccons.c derivation of this code, otherwise
the BSD copyright would be very bad to have on this file.
1993-08-20 17:19:29 +00:00
Rodney W. Grimes
3b3837db61 Fixed poor timeout code in out_fdc. The timeout counter was not being
reinitialized between while loops.  Added comments about what was going
on in the out_fdc routine.

out_fdc now returns if the direction bit is not set in time instead of
trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
Jordan K. Hubbard
c3b435bb51 Updated syscons to 0.2b - please test this! It won't be in the ALPHA
release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
Jordan K. Hubbard
916347f77e Added necessary files for syscons (may move font include later, but for now
it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Jordan K. Hubbard
ba52f64934 Applied Andrew's patch to fix loop-on-logout problem. 1993-07-20 02:06:49 +00:00
Jordan K. Hubbard
bb5d729efe Removed check for interrupting board before interrupts were enabled.
This should result in more AST clones getting seen.
1993-07-20 00:22:30 +00:00
Rodney W. Grimes
7ea04e18b1 Fixed sccs id to be From:\n com.c xxxx. The sccs id was changed by the
patch kit and it should not have been.
1993-07-18 21:27:57 +00:00
David Greenman
2a6c898016 Modified attach printf's so that the output is compatible with the "new"
way of doing things. There still remain several drivers that need to
be updated.  Also added a compile-time option to pccons to switch the
control and caps-lock keys (REVERSE_CAPS_CTRL) - added for my personal
sanity.
1993-07-15 17:53:14 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00