Andre:
First lets get major new features into the kernel in a clean and nice way,
and then start optimizing. In this case we don't have any obfusication that
makes later profiling and/or optimizing difficult in any way.
Requested by: csjp, sam
mechanism used by pfil. This shared locking mechanism will remove
a nasty lock order reversal which occurs when ucred based rules
are used which results in hard locks while mpsafenet=1.
So this removes the debug.mpsafenet=0 requirement when using
ucred based rules with IPFW.
It should be noted that this locking mechanism does not guarantee
fairness between read and write locks, and that it will favor
firewall chain readers over writers. This seemed acceptable since
write operations to firewall chains protected by this lock tend to
be less frequent than reads.
Reviewed by: andre, rwatson
Tested by: myself, seanc
Silence on: ipfw@
MFC after: 1 month
tcpip_fillheaders()
tcp_discardcb()
tcp_close()
tcp_notify()
tcp_new_isn()
tcp_xmit_bandwidth_limit()
Fix a locking comment in tcp_twstart(): the pcbinfo will be locked (and
is asserted).
MFC after: 2 weeks
inp->inp_moptions pointer, so that ip_getmoptions() can perform
necessary locking when doing non-atomic reads.
Lock the inpcb by default to copy any data to local variables, then
unlock before performing sooptcopyout().
MFC after: 2 weeks
modifications to the inpcb IP options mbuf:
- Lock the inpcb before passing it into ip_pcbopts() in order to prevent
simulatenous reads and read-modify-writes that could result in races.
- Pass the inpcb reference into ip_pcbopts() instead of the option chain
pointer in the inpcb.
- Assert the inpcb lock in ip_pcbots.
- Convert one or two uses of a pointer as a boolean or an integer
comparison to a comparison with NULL for readability.
pointer updates: test available space while holding the socket buffer
mutex, and continue to hold until until the pointer update has been
performed.
MFC after: 2 weeks
This socket option allows processes query a TCP socket for some low
level transmission details, such as the current send, bandwidth, and
congestion windows. Linux provides a 'struct tcpinfo' structure
containing various variables, rather than separate socket options;
this makes the API somewhat fragile as it makes it dificult to add
new entries of interest as requirements and implementation evolve.
As such, I've included a large pad at the end of the structure.
Right now, relatively few of the Linux API fields are filled in, and
some contain no logical equivilent on FreeBSD. I've include __'d
entries in the structure to make it easier to figure ou what is and
isn't omitted. This API/ABI should be considered unstable for the
time being.
window was 0 bytes in size. This may have been the cause of unsolved
"connection not closing" reports over the years.
Thanks to Michiel Boland for providing the fix and providing a concise
test program for the problem.
Submitted by: Michiel Boland
MFC after: 2 weeks
contents of the tcpcb are read and modified in volume.
In tcp_input(), replace th comparison with 0 with a comparison with
NULL.
At the 'findpcb', 'dropafterack', and 'dropwithreset' labels in
tcp_input(), assert 'headlocked'. Try to improve consistency between
various assertions regarding headlocked to be more informative.
MFC after: 2 weeks
structure, so assert the inpcb lock associated with the tcptw.
Also assert the tcbinfo lock, as tcp_timewait() may call
tcp_twclose() or tcp_2msl_rest(), which require it. Since
tcp_timewait() is already called with that lock from tcp_input(),
this doesn't change current locking, merely documents reasons for
it.
In tcp_twstart(), assert the tcbinfo lock, as tcp_timer_2msl_rest()
is called, which requires that lock.
In tcp_twclose(), assert the tcbinfo lock, as tcp_timer_2msl_stop()
is called, which requires that lock.
Document the locking strategy for the time wait queues in tcp_timer.c,
which consists of protecting the time wait queues in the same manner
as the tcbinfo structure (using the tcbinfo lock).
In tcp_timer_2msl_reset(), assert the tcbinfo lock, as the time wait
queues are modified.
In tcp_timer_2msl_stop(), assert the tcbinfo lock, as the time wait
queues may be modified.
In tcp_timer_2msl_tw(), assert the tcbinfo lock, as the time wait
queues may be modified.
MFC after: 2 weeks
but unlikely races that could be corrected by having tcp_keepcnt
and tcp_keepintvl modifications go through handler functions via
sysctl, but probably is not worth doing. Updates to multiple
sysctls within evaluation of a single addition are unlikely.
Annotate that tcp_canceltimers() is currently unused.
De-spl tcp_timer_delack().
De-spl tcp_timer_2msl().
MFC after: 2 weeks
on the tcpcb, but also calls into tcp_close() and tcp_twrespond().
Annotate that tcp_twrecycleable() requires the inpcb lock because it does
a series of non-atomic reads of the tcpcb, but is currently called
without the inpcb lock by the caller. This is a bug.
Assert the inpcb lock in tcp_twclose() as it performs a read-modify-write
of the timewait structure/inpcb, and calls in_pcbdetach() which requires
the lock.
Assert the inpcb lock in tcp_twrespond(), as it performs multiple
non-atomic reads of the tcptw and inpcb structures, as well as calling
mac_create_mbuf_from_inpcb(), tcpip_fillheaders(), which require the
inpcb lock.
MFC after: 2 weeks
protects access to the ISN state variables.
Acquire the tcbinfo write lock in tcp_isn_tick() to synchronize
timer-driven isn bumping.
Staticize internal ISN variables since they're not used outside of
tcp_subr.c.
MFC after: 2 weeks
from divert sockets.
- Remove div_disconnect() method, since it shouldn't be called now.
- Remove div_abort() method. It was never called directly, since protocol
doesn't have listen queue. It was called only from div_disconnect(),
which is removed now.
Reviewed by: rwatson, maxim
Approved by: julian (mentor)
MT5 after: 1 week
MT4 after: 1 month
after allowing more than one address with the same prefix.
Reported by: Vladimir Grebenschikov <vova NO fbsd SPAM ru>
Submitted by: ru (also NetBSD rev. 1.83)
Pointyhat to: mlaier
and has been broken twice:
- in the beginning of div_output() replace KASSERT with assignment, as
it was in rev. 1.83. [1] [to be MFCed]
- refactor changes introduced in rev. 1.100: do not prepend a new tag
unconditionally. Before doing this check whether we have one. [2]
A small note for all hacking in this area:
when divert socket is not a real userland, but ng_ksocket(4), we receive
_the same_ mbufs, that we transmitted to socket. These mbufs have rcvif,
the tags we've put on them. And we should treat them correctly.
Discussed with: mlaier [1]
Silence from: green [2]
Reviewed by: maxim
Approved by: julian (mentor)
MFC after: 1 week
This makes it possible to have more than one address with the same prefix.
The first address added is used for the route. On deletion of an address
with IFA_ROUTE set, we try to find a "fallback" address and hand over the
route if possible.
I plan to MFC this in 4 weeks, hence I keep the - now obsolete - argument to
in_ifscrub as it must be considered KAPI as it is not static in in.c. I will
clean this after the MFC.
Discussed on: arch, net
Tested by: many testers of the CARP patches
Nits from: ru, Andrea Campi <andrea+freebsd_arch webcom it>
Obtained from: WIDE via OpenBSD
MFC after: 1 month
retain the pcbinfo lock until we're done using a pcb in the in-bound
path, as the pcbinfo lock acts as a pseuo-reference to prevent the pcb
from potentially being recycled. Clean up assertions and make sure to
assert that the pcbinfo is locked at the head of code subsections where
it is needed. Free the mbuf at the end of tcp_input after releasing
any held locks to reduce the time the locks are held.
MFC after: 3 weeks
destined for a blackhole route.
This also means that blackhole routes do not need to be bound to lo(4)
or disc(4) interfaces for the net.inet.ip.fastforwarding=1 case.
Submitted by: james at towardex dot com
Sponsored by: eXtensible Open Router Project <URL:http://www.xorp.org/>
MFC after: 3 weeks
udp_in6, and udp_ip6 to pass socket address state between udp_input(),
udp_append(), and soappendaddr_locked(). While file in the default
configuration, when running with multiple netisrs or direct ithread
dispatch, this can result in races wherein user processes using
recvmsg() get back the wrong source IP/port. To correct this and
related races:
- Eliminate udp_ip6, which is believed to be generated but then never
used. Eliminate ip_2_ip6_hdr() as it is now unneeded.
- Eliminate setting, testing, and existence of 'init' status fields
for the IPv6 structures. While with multiple UDP delivery this
could lead to amortization of IPv4 -> IPv6 conversion when
delivering an IPv4 UDP packet to an IPv6 socket, it added
substantial complexity and side effects.
- Move global structures into the stack, declaring udp_in in
udp_input(), and udp_in6 in udp_append() to be used if a conversion
is required. Pass &udp_in into udp_append().
- Re-annotate comments to reflect updates.
With this change, UDP appears to operate correctly in the presence of
substantial inbound processing parallelism. This solution avoids
introducing additional synchronization, but does increase the
potential stack depth.
Discovered by: kris (Bug Magnet)
MFC after: 3 weeks
A complete rationale and discussion is given in this message
and the resulting discussion:
http://docs.freebsd.org/cgi/mid.cgi?4177C8AD.6060706
Note that this commit removes only the functional part of T/TCP
from the tcp_* related functions in the kernel. Other features
introduced with RFC1644 are left intact (socket layer changes,
sendmsg(2) on connection oriented protocols) and are meant to
be reused by a simpler and less intrusive reimplemention of the
previous T/TCP functionality.
Discussed on: -arch
under high load: only set function state to loop and continuing sending
if there is no data left to send.
RELENG_5_3 candidate.
Feet provided: Peter Losher <Peter underscore Losher at isc dot org>
Diagnosed by: Aniel Hartmeier <daniel at benzedrine dot cx>
Submitted by: mohan <mohans at yahoo-inc dot com>
