Commit Graph

11 Commits

Author SHA1 Message Date
Landon J. Fuller
d177c19903 bwn(4): migrate bwn(4) to the native bhnd(9) interface, and drop siba_bwn.
- Remove the shim interface that allowed bwn(4) to use either siba_bwn or
  bhnd(4), replacing all siba_bwn calls with their bhnd(4) bus equivalents.
- Drop the legay, now-unused siba_bwn bus driver.
- Clean up bhnd(4) board flag defines referenced by bwn(4).

Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D13518
2018-02-05 23:38:15 +00:00
Landon J. Fuller
a225321fbc bhnd/bwn(4): Define a bhnd(4) softmodem device class for the v.90 modem
codec core, and mark the core as unpopulated on all BCM4306 bwn(4) devices.

Sponsored by:	The FreeBSD Foundation
2018-01-19 22:43:08 +00:00
Pedro F. Giffuni
6e778a7efd SPDX: license IDs for some ISC-related files. 2017-12-08 15:57:29 +00:00
Landon J. Fuller
caeff9a3c2 bhnd(4): implement MIPS and PCI(e) interrupt support
On BHND MIPS SoCs, this replaces the use of hard-coded MIPS IRQ#s in the
common bhnd(4) core drivers; we now register an INTRNG child PIC that
handles routing of backplane interrupt vectors via the MIPS core.

On BHND PCI devices, backplane interrupt vectors are now routed to the
PCI/PCIe host bridge core when bus_setup_intr() is called, where they are
dispatched by the PCI core via a host interrupt (e.g. INTx/MSI).

The bhndb(4) bridge driver tracks registered interrupt handlers for the
bridged bhnd(4) devices and manages backplane interrupt routing, while
delegating actual bus interrupt setup/teardown to the parent bus on behalf
of the bridged cores.

Approved by:	adrian (mentor, implicit)
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D12518
2017-11-21 23:15:20 +00:00
Landon J. Fuller
f90f4b6532 bhnd(4): Initial PMU/PWRCTL power and clock management support.
- Added bhnd_pmu driver implementations for PMU and PWRCTL chipsets,
  derived from Broadcom's ISC-licensed HND code.
- Added bhnd bus-level support for routing per-core clock and resource
  power requests to the PMU device.
- Lift ChipCommon support out into the bhnd module, dropping
  bhnd_chipc.

Reviewed by:	mizhka
Approved by:	adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D7492
2016-08-27 00:03:02 +00:00
Landon J. Fuller
cb4abe62ba [mips/broadcom] Generic platform_reset() support.
This adds support for performing platform_reset() on all supported
devices, using early boot enumeration of chipc capabilities and
available cores.


- Added Broadcom-specific MIPS CP0 register definitions used by
  BCM4785-specific reset handling.
- Added a bcm_platform structure for tracking chipc/pmu/cfe platform
  data.
- Extended the BCMA EROM API to support early boot lookup of core info
  (including port/region mappings).
- Extended platform_reset() to support PMU, PMU+AOB, and non-PMU
  devices.

Reviewed by:	mizhka
Approved by:	adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D7539
2016-08-26 20:16:02 +00:00
Adrian Chadd
8ef24a0d4b [bhnd] Finish bhnd(4) PCI/PCIe-G1 hostb support.
Now that we've got access to SPROM and can access board identification,
this implements all known remaining hardware work-arounds for the bhnd(4)
PCI and PCIe-G1 cores operating endpoint mode.

Additionally, this adds an initial set of skeleton PCIe-G2 hostb and pcib
drivers, required by fullmac and newer softmac devices.

Submitted by:	Landon Fuller <landonf@landonf.org>
Differential Revision:	https://reviews.freebsd.org/D6377
2016-05-17 06:52:53 +00:00
Adrian Chadd
d567592b68 [bhnd] Centralize fetching of board information
Centralizes fetching of board information (vendor, type, revision, etc),
and adds support for matching quirks against board identification info.

* Adds a BHND_BUS_READ_BOARD_INFO(), allowing bhnd bus/bus parent(s) to
  handle implementation-specific fetching of board info.
* Integrates board type constants from the latest Broadcom ISC-licensed
  bcmdevs.h included in dd-wrt's Broadcom driver source drops.
* Adds support for matching on chip/board quirks to bhnd_device_quirks()/
  bhnd_chip_quirks().
* Use the new board/chip quirk matching to match Apple devices that failed
  to set BFL2_PCIEWAR_OVR in SROM.

Submitted by:	Landon Fuller <landonf@landonf.org>
Differential Revision:	https://reviews.freebsd.org/D6361
2016-05-17 00:23:46 +00:00
Adrian Chadd
e83ce34035 [bhnd] Initial bhnd(4) SPROM/NVRAM support.
This adds support for the NVRAM handling and the basic SPROM
hardware used on siba(4) and bcma(4) devices, including:

* SPROM directly attached to the PCI core, accessible via PCI configuration
  space.
* SPROM attached to later ChipCommon cores.
* SPROM variables vended from the parent SoC bus (e.g. via a directly-attached
  flash device).

Additional improvements to the NVRAM/SPROM interface will
be required, but this changeset stands alone as working
checkpoint.

Submitted by:	Landon Fuller <landonf@landonf.org>
Reviewed by:	Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support)
Differential Revision:	https://reviews.freebsd.org/D6196
2016-05-08 19:14:05 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Adrian Chadd
4ad7e9b01a Bring over the initial rewrite of the broadcom bus support found in their
SoCs and various chips (including, famously, their wifi chips.)

This is "just" (all 20,000 lines of it) code to enumerate the various
versions of busses inside these devices, including the PCI bridge and
the direct SIBA bridge found in MIPS chips.

It also includes shared code for some bus operations (suspend, resume, etc);
EEPROM/SROM/etc parsing and other things that are shared between chips.

Eventually this'll replace the code that bwi/bwn uses for the internal
bus, as well as some apparently upcoming mips74k broadcom SoC support
which uses bwn!

Thanks to Landon Fuller <landonf@landonf.org> for all this work!

Obtained from:	https://github.com/landonf/freebsd/compare/user/landonf/bcm4331-CURRENT
2016-02-26 03:34:08 +00:00