Commit Graph

45 Commits

Author SHA1 Message Date
Peter Wemm
d988f6deec Tidy up some xdrproc_t related warnings. 2003-10-26 04:32:53 +00:00
David E. O'Brien
22e9bc15f9 Use __FBSDID vs. rcsid[]. 2003-05-04 00:59:13 +00:00
Jens Schweikhardt
57bd0fc6e8 english(4) police. 2002-12-27 12:15:40 +00:00
Ruslan Ermilov
8d5d039f80 Uniformly refer to a file system as "file system".
Approved by:	re
2002-12-12 17:26:04 +00:00
Philippe Charnier
3f162cb85d The .Nm utility 2002-07-06 19:19:48 +00:00
Dag-Erling Smørgrav
f249dbcc71 Spell void * as void * rather than caddr_t. This is complicated by the
fact that caddr_t is often misspelled as char *.

Sponsored by:	DARPA, NAI Labs
2002-04-28 15:18:50 +00:00
Dag-Erling Smørgrav
425dd8accb Fix warnings.
Sponsored by:	DARPA, NAI Labs
2002-04-06 19:08:02 +00:00
Dag-Erling Smørgrav
dc584ddbc5 ANSIfy and remove some dead code.
Sponsored by:	DARPA, NAI Labs
2002-02-06 15:26:07 +00:00
Dag-Erling Smørgrav
ed4d1c46a2 Apply the following mechanical transformations in preparation for
ansification and constification:

    s{\s+__P\((\(.*?\))\)}{$1}g;
    s{\(\s+}{\(}g;
    s{\s+\)}{\)}g;
    s{\s+,}{,}g;
    s{(\s+)(for|if|switch|while)\(}{$1$2 \(}g;
    s{return ([^\(].*?);}{return ($1);}g;
    s{([\w\)])([!=+/\*-]?=)([\w\(+-])}{$1 $2 $3}g;
    s{\s+$}{\n};g

Also add $FreeBSD$ where needed.

MFC after:	1 week
2002-02-06 13:30:31 +00:00
Kris Kennaway
9357f4121d Lock down with WFORMAT?=1, with overrides in the subdirectories which
are not yet warning-clean.  Tested on i386 and alpha.
2002-02-04 02:33:51 +00:00
Ruslan Ermilov
491a842962 yp(4) -> yp(8).
PR:		docs/30797
2002-01-14 16:59:03 +00:00
Dima Dorfman
3fd95272b3 yp_errno is an enum ypstat.
PR:		29190
Submitted by:	Cristan Szmajda <cristan@unsw.edu.au>
Reviewed by:	md5(1)
2001-07-24 12:33:08 +00:00
Ruslan Ermilov
e5b5c66bca - Backout botched attempt to intoduce MANSECT feature.
- MAN[1-9] -> MAN.
2001-03-26 14:22:12 +00:00
Alfred Perlstein
cc74aaddad change callrpc() from taking "char *" args, I'm quite sure they really meant
to use "void *".

remove a duplicate prototype for callrpc() from libexec/ypxfr/ypxfr_extern.h
2001-03-23 16:14:49 +00:00
Ruslan Ermilov
020ee2dc9f Set the default manual section for libexec/ to 8. 2001-03-20 18:10:13 +00:00
Ruslan Ermilov
896eb7d10c Prepare for mdoc(7)NG. 2001-01-16 09:15:57 +00:00
Ruslan Ermilov
760819894e mdoc(7) police: use the new features of the Nm macro. 2000-11-20 14:42:24 +00:00
Ruslan Ermilov
b5c508fba3 Use Fx macro wherever possible. 2000-11-14 11:20:58 +00:00
Jonathan Lemon
7d664a2f47 Spelling fix: transfered --> transferred
Submitted by:  dan@dan.emsphone.com
2000-06-02 21:22:09 +00:00
Mike Pritchard
bb2c7cbb5b Fix various man pages to stop abusing the .Bx macro to generate the
string "FreeBSD".  Use the .Fx macro instead.
2000-01-23 02:18:19 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Bill Paul
f9d553adf5 Fix ypxfr so that it can be run from cron.
Patch submitted by: Dan Nelson <dnelson@emsphone.com>
1999-05-10 20:55:29 +00:00
Bruce Evans
bb6ae0a4a9 Fixed printf format errors. 1998-08-02 16:44:18 +00:00
Bruce Evans
330698829e Fixed missing dependencies on headers generated by rpcgen, as usual.
Removed bogus dependencies of generated .c files on generated headers.
Sorted sources lists.
1998-05-10 16:01:36 +00:00
Philippe Charnier
99e2b73dd8 .Sh AUTHOR -> .Sh AUTHORS. Use .An/.Aq. 1998-03-19 07:37:43 +00:00
Philippe Charnier
27eed7e3b4 Use full path in synopsis. Sort #includes. Use .Tn for NIS. 1997-12-08 07:49:56 +00:00
Bill Paul
23677e98fe Putting records with zero-length keys into a Berkeley DB hash database
is asking for trouble (sequential database enumerations can get caught
in an infinite loop). The yp_mkdb(8) utility avoids putting such records
into a database, but ypxfr does not. Today I got bit by a NULL entry in
one of the amd maps on my network, which is served by a SunOS master.
The map was transfered successfully to my FreeBSD slave, but attempting
to dump it with ypcat(1) caused ypserv(8) to transmit the same record
over and over again, making the map appear to be infinitely large. I
finally noticed the problem while testing a new version of amd under
development at the Columbia CS department, which began gobbling up insane
amounts of memory while trying to swallow the map.

To deal with this problem, I'm modifying ypxfr to watch for records
with zero-length keys and turn them into something less destructive
before writing them to the database.
1997-09-30 18:08:11 +00:00
Warner Losh
91477cc4d7 compare return value from getopt against -1 rather than EOF, per the final
posix standard on the topic.
1997-03-28 15:48:21 +00:00
Peter Wemm
9e522f7a18 Revert $FreeBSD$ to $Id$ 1997-02-22 14:22:49 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Wolfram Schneider
af20215665 Sort cross references. 1997-01-13 00:25:51 +00:00
Bill Paul
a2e787bff1 Change declaration of yp_errno from int to enum ypstat so that it
matches what's in ypserv/yp_extern.h (which I changed when I added the
async DNS stuff). The conflict broke the build of rpc.yppasswdd.

Pointed out by: bde
1996-12-23 18:15:41 +00:00
Bill Paul
81a82d4dfd Give ypxfr the ability to detect the presence of the YP_INTERDOMAIN
and YP_SECURE flags so that it can properly add them to newly created
maps when needed. This applies only when using the 'standard' method
for map transfers. When using rpc.ypxfrd, the whole map is copied
verbatim, along with any special entries that may be encoded in it.

Also made -Wall a little quieter for ypxfrd_getmap.c.
1996-10-25 16:13:09 +00:00
Bill Paul
2c33b20a87 Add a couple of reserved port checks: don't talk to either ypserv
or rpc.ypxfrd processes on remote systems that aren't bound to reserved
ports. The servers already do reserved port checks on the clients.

Obtained from: scrutinizing the OpenBSD ypxfr sources. (Note that this
applies to the ypserv check only; OpenBSD doesn't have an rpc.ypxfrd.)
1996-10-20 19:52:53 +00:00
Bruce Evans
5b963fa12e Fixed DPADD. 1996-09-05 17:16:10 +00:00
Bill Paul
78acff3281 Fill in new arguments in the ypxfr_getmap structure (byte order,
db type, filename) and check for new failure codes (db mismatch,
endian mismatch).
1996-07-04 02:13:11 +00:00
Bill Paul
1ed0ebdc98 Take ypxfrd_xdr.c out of SRCS line. It should be included in librpcsvc,
which ypxfr links with. (Sorry: left over development bogon.)

Just a reminder: you must rebuild librpcsvc before you build
this program.

Pointed out by: Stephen Hocking
1996-06-06 03:58:06 +00:00
Bill Paul
16deb43a45 Add support for rpc.ypxfrd and document it in the man page.
Also generallize the yp_dbwrite functions a little: allow the caller
to specify certain flags. I need this mostly for some changes to
rpc.yppasswdd to allow in-place updates.

Also change Makefile a little to use the same format as ypserv.
1996-06-05 05:42:52 +00:00
Bill Paul
a7bd0e76fc phkmalloc doesn't like the call to xdr_free() in ypxfr_get_master().
Nuke it.
1996-05-07 21:08:20 +00:00
Bill Paul
b95c787ed4 Small tweak to yp_put_record(): call the DB put routine with the
R_NOOVERWRITE flag and process return codes so that we can tell the
difference between a failure due to a duplicate database entry and
failure due to some other error.
1996-04-28 03:59:56 +00:00
Mike Pritchard
78b0b234eb Correct a bunch of man page cross references and generally
try and silence "manck".

ncurses, rpc, and some of the gnu stuff are still a big mess, however.
1996-02-11 22:38:05 +00:00
Bill Paul
bc66df81bb ypxfr_getmap.c:
- Handle 'empty' maps more gracefully. By empty I mean a valid map that
  just happens not to have any entries in it, such as you would get if
  you built a map database from an empty file. Previously, trying to
  ypxfr such a map would yield an 'NIS map/database error' which is not
  the correct behavior.

ypxfr_misc:
- Make sure to free() or xdr_free() dynamically allocated memory in
  ypxfr_get_master() as necessary.
1996-02-04 05:18:44 +00:00
Bill Paul
34a042e8b8 - Fix error reporting when checking order number via NIS: we return zero
on a failure, but if we're checking a corrupt map we could also get back
  a zero from ypserv without really encountering any actual error. Flag this
  condition and generate an meaningful error message.

- Fix transmission of ypxfr_clear to ypserv: error checking was wrong
  and we sending YPXFR_YPERR as an error status instead of YPXFR_CLEAR.

- To help avoid a race condition (or at least reduce the likelyhood of
  it occuring), use rename() to move a newly transfered map into place
  instead of unlink()ing the old one first and then renaming. Da man page
  sez that rename should do the unlink() for us. This prevents ypserv
  from returning 'no such map in domain' when asked to query a map which
  ypxfr has just unlink()ed but not yet replaced.
1996-01-10 17:44:10 +00:00
Bill Paul
d6cab90261 Sync with my sources at home (these are really tiny changes):
- Fix a SEGV condition in ypxfr_main.c that reared its ugly head while I
  was working on the 'parallel jobs' feature of the new yppush. After we've
  completed the map transfer and created a local temporary copy, we check
  the order number of the map on ypserv again to make sure it didn't change
  while the transfer was in progress (map skew). If for some reason we flat
  out fail to get the order number from the server, we flag this as an
  error and bail, telling ypxfr_exit() to clean up our temporary files
  for us. However, ypxfr_exit() tries to close the database before unkining
  it, not realizing that it has already been closed prior to the skew check.
  The second attempt to close the database causes a SEGV somewhere inside
  the DB code.

  (Well, it does on my 2.0.5 machine anyway. I haven't seen anyone modify
  the DB library code in ages, so the condition is probably still there.)

  To work around this, we deliberately set dbp to NULL after closing the
  database and check for the condition in ypxfr_exit(), being careful to
  avoid the second close if we see the NULL.

- In yp_dbwrite.c, make yp_open_db_rw() open the database with O_EXLOCK
  flag set. This probably won't affect much of anything, but I feel better
  having it there.
1996-01-06 20:28:06 +00:00
Bill Paul
665823d011 Import the new ypxfr, written by yours truly. Functionally equivalent
to the old one, except that it supports an additional option (-p path)
that lets you specify the top level path wiere your NIS maps live.
(ypserv allows you to specify a path like this, so it makes sense that
ypxfr should too. ypserv will automagically pass the -p flag to ypxfr
if you use a path other than /var/yp when you start it.)

This program uses client stub code generated by rpcgen as well as
the yp_dblookup.c module from ypserv.
1995-12-25 03:07:13 +00:00