Commit Graph

278 Commits

Author SHA1 Message Date
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Dimitry Andric
29658c96ce Remove duplicate const specifiers in many drivers (I hope I got all of
them, please let me know if not).  Most of these are of the form:

static const struct bzzt_type {
	[...list of members...]
} const bzzt_devs[] = {
	[...list of initializers...]
};

The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).

I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).

Reviewed by:	yongari, marius
MFC after:	1 week
2012-11-05 19:16:27 +00:00
Marius Strobl
e4029d4cac - Change the module order of these MAC drivers to be last so they are
deterministically handled after the corresponding PHY drivers when
  loaded as modules. Otherwise, when these MAC/PHY driver pairs are
  compiled into a single module probing the PHY driver may fail. This
  makes r151438 and r226154 actually work. [1]
  Reported and tested by: yongari (fxp(4))
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

Submitted by:	jhb [1]
MFC after:	3 days
2012-05-11 02:40:40 +00:00
Marius Strobl
604f5f1f77 Use DEVMETHOD_END. 2011-11-23 20:27:26 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Marius Strobl
bab10b961f There's no need to read DC_10BTSTAT twice in dcphy_status(). 2011-11-18 21:23:13 +00:00
Marius Strobl
166e31d988 - There's no need to ignore the return value of mii_attach(9) when attaching
dcphy(4) (CID 9283).
- In dc_detach(), check whether ifp is NULL as dc_attach() may call the
  former without ifp being allocated (CID 4288).

Found with:	Coverity Prevent(tm)
2011-11-18 21:22:43 +00:00
Pyun YongHyeon
89b2411bc3 Partially revert r218788. r218788 removed calling dc_setcfg() for
!DC_IS_ADMTEK in dc_miibus_statchg(). This change broke link
establishment of Intel 21143 with dcphy(4) where it stuck in
"ability detect" state without completing auto-negotiation.
Also nuke dc_if_media as it's not actually used.

Submitted by:	marius
2011-11-18 19:38:19 +00:00
Marius Strobl
8c1093fc50 - Import the common MII bitbang'ing code from NetBSD and convert drivers to
take advantage of it instead of duplicating it. This reduces the size of
  the i386 GENERIC kernel by about 4k. The only potential in-tree user left
  unconverted is xe(4), which generally should be changed to use miibus(4)
  instead of implementing PHY handling on its own, as otherwise it makes not
  much sense to add a dependency on miibus(4)/mii_bitbang(4) to xe(4) just
  for the MII bitbang'ing code. The common MII bitbang'ing code also is
  useful in the embedded space for using GPIO pins to implement MII access.
- Based on lessons learnt with dc(4) (see r185750), add bus barriers to the
  MII bitbang read and write functions of the other drivers converted in
  order to ensure the intended ordering. Given that register access via an
  index register as well as register bank/window switching is subject to the
  same problem, also add bus barriers to the respective functions of smc(4),
  tl(4) and xl(4).
- Sprinkle some const.

Thanks to the following testers:
Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4))
Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4).

Reviewed by:	yongari (subset of drivers)
Obtained from:	NetBSD (partially)
2011-11-01 16:13:59 +00:00
Pyun YongHyeon
52ca7ee210 Add support for ALi/ULi, now NVIDIA, M5261/M5263 PCI FastEthernet
controller which is found on ULi M1563 South Bridge & M1689 Bridge.
These controllers look like a tulip clone.
M5263 controller does not support MII bitbang so use DC_ROM
register to access MII registers.  Like other tulip variants, ULi
controller uses a setup frame to configure RX filter and uses new
setup frame format.  It's not clear to me whether the controller
supports a hash based multicast filtering so this patch uses 14
perfect multicast filter to filter multicast frames.  If number of
multicast addresses is greater than 14, controller is put into a
mode that receives all multicast frames.
Due to lack of access to M5261, this change was not tested with
M5261 but it probably works.  Many thanks to Marco who provided
remote access to M5263.

Tested by:	Marco Steinbach <coco <> executive-computing dot de>,
		Martin MATO <martin.mato <> orange dot fr>
2011-10-24 20:48:02 +00:00
Pyun YongHyeon
d7e9ac7523 When driver is run for the first time there would be no established
link such that calling dc_setcfg() right after media change would
be meaningless unless controller in question is not Davicom DM9102.
Ideally dc_setcfg() should be called when speed/duplex is resolved
otherwise it would reprogram controller with wrong speed/duplex
information.  Because MII status change callback already calls
dc_setcfg() I think calling dc_setcfg() in dc_init_locked() is
wrong.  For instance, it would take some time to establish a link
after mii_mediachg(), so blindly calling dc_setcfg() right after
mii_mediachg() will always yield wrong media configuration.

Extend dc_ifmedia_upd() to handle media change and still allow
21143 and Davidcom controllers program speed/duplex regardless of
current resolved speed/duplex of link. In theory 21143 may not need
to call dc_setcfg() right after media change, but leave it as it is
because there are too many variants to test that change.  Probably
dc(4) shall need a PHY reset in dc_ifmedia_upd() but it's hard to
verify correctness of the change.

This change reliably makes ULi M5263 establish a link.

While I'm here correctly report media change result. Previously it
always reported a success.
2011-10-24 20:26:37 +00:00
Pyun YongHyeon
8c094ecc83 Add missing bus_dmamap_sync() in setup frame transmit.
MFC after:	3 days
2011-10-24 17:09:22 +00:00
Pyun YongHyeon
cb94db27d2 Fix a regression introduced in r218832. For TX status check, driver
should use a TX list DMA tag.

MFC after:	3 days
2011-10-24 17:05:59 +00:00
Kevin Lo
ee6eac62f7 Remove duplicate header includes 2011-06-28 08:36:48 +00:00
Warner Losh
7a6fab6656 Supress command completion failure warning when the card isn't
present.  Only call the bus to check if we actually do timeout so we
don't affect the normal case (since this case needn't be optimized and
this guards against all races).
2011-06-21 20:52:55 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
Pyun YongHyeon
1da7683a7c Revise r220046 by introducing dc_netcfg_wait() which waits the end
of active DMA cycle. dc_setcfg() also has to wait until the DMA
engine is stopped so using a common function to handle the job is
better than duplicating the code.

No objection from:	marius
2011-03-28 19:08:53 +00:00
Marius Strobl
f7c719b1b3 Wait until the DMA engine is stopped before unmapping buffers and
descriptors, which fixes DMA errors seen on sparc64.

Obtained from:	OpenBSD
MFC after:	1 week
2011-03-26 22:39:23 +00:00
Pyun YongHyeon
848a02fc41 Remove too expensive bus_dmamap_sync(9) call in dc_rx_resync().
With this change, driver may not notice updated descriptor status
change when bounce buffers are active. However, rxeof() in next run
will handle the synchronization.

Change dc_rxeof() a bit to return the number of processed frames in
RX descriptor ring. Previously it returned the number of frames
that were successfully passed to upper stack which in turn means it
ignored frames that were discarded due to errors. The number of
processed frames in RX descriptor ring is used to detect whether
driver is out of sync with controller's current descriptor pointer.
Returning number of processed frames reduces unnecessary (probably
wrong) re-synchronization.

Reviewed by:	marius
2011-03-16 17:09:51 +00:00
Pyun YongHyeon
d9efae0351 Rearrange dc_tx_underrun() a bit to correctly set TX FIFO threshold
value. Controllers that always require "store and forward" mode(
Davicom and PNIC 82C168) have no way to recover from TX underrun
except completely reinitializing hardware. Previously only Davicom
was reinitialized and the TX FIFO threshold was changed not to use
"store and forward" mode after reinitialization since the default
FIFO threshold value was 0. This effectively disabled Davicom
controller's "store and forward" mode once it encountered TX
underruns. In theory, this can cause watchodg timeouts.

Intel 21143 controller requires TX MAC should be idle before
changing TX FIFO threshold. So driver tried to disable TX MAC and
checked whether it saw the idle state of TX MAC. Driver should
perform full hardware reinitialization on failing to enter to idle
state and it should not touch TX MAC again once it performed full
reinitialization.

While I'm here remove resetting TX FIFO threshold to 0 when
interface is put into down state. If driver ever encountered TX
underrun, it's likely to trigger TX underrun again whenever
interface is brought to up again. Keeping old/learned TX FIFO
threshold value shall reduce the chance of seeing TX underrns in
next run.
2011-03-08 19:49:16 +00:00
Pyun YongHyeon
8f382a1fd0 Remove unnecessary controller reinitialization which resulted in
link flips during alias address insertion or dhclient operation.
While I'm here remove dc_reset() in DC_ISR_BUS_ERR case. Device is
fully reinitialized again in dc_init_locked().
2011-02-23 02:40:31 +00:00
Pyun YongHyeon
ee320f98a9 s/u_intXX_t/uintXX_t/g 2011-02-19 03:32:10 +00:00
Pyun YongHyeon
e4eb0f2e15 Consistently use a tab character instead of space after #define.
No functional changes.
2011-02-19 03:23:19 +00:00
Pyun YongHyeon
26b40a6592 Count how many frames driver lost in interrupt handler. This
register is cleared on read so make sure to clear it in driver
initialization phase.
2011-02-19 03:01:24 +00:00
Pyun YongHyeon
5f14ee2363 Split common TX/RX descriptor DMA tag to TX and RX DMA tags
respectively and fix all bus_dma(9) issues seen when bounce buffers
are used.
 o Setup frame handling had no bus_dmamap_sync(9) which prevented
   driver from configuring RX filter. Add missing bus_dmamap_sync(9)
   in both dc_setfilt_21143()/dc_setfilt_xircom() and dc_txeof().
 o Use bus_addr_t for DMA segment instead of using u_int32_t.
 o Introduce dc_dma_alloc()/dc_dma_free() functions to allocate/free
   DMA'able memory.
 o Create two DMA descriptor list for each TX/RX lists. This change
   will minimize the size of bounce buffers that would be used in
   each TX/RX path.  Previously driver had to copy both TX/RX lists
   when bounce buffer is active.
 o 21143 data sheet says descriptor list requires 4 bytes alignment.
   Remove PAGE_SIZE alignment restriction and use
   sizeof(struct dc_dec).
 o Setup frame requires 4 bytes alignment.  Remove PAGE_SIZE
   alignment restriction and use sizeof(struct dc_dec).
 o Add missing DMA map unload for both setup frame and TX/RX
   descriptor list.
 o Overhaul RX handling logic such that make driver always allocate
   new RX buffer with dc_newbuf(). Previously driver allowed to
   copy received frame with m_devget(9) after passing the
   descriptor ownership to controller. This can lead to passing
   wrong frame to upper stack.
 o Introduce dc_discard_rxbuf() which will discard received frame
   and reuse loaded DMA map and RX mbuf.
 o Correct several wrong bus_dmamap_sync(9) usage in dc_rxeof and
   dc_txeof. The TX/RX descriptor lists are updated by both driver
   and HW so READ/WRITE semantics should be used.
 o If driver failed to allocate new RX buffer, update if_iqdrops
   counter instead of if_ierrors since driver received the frame
   without errors.
 o Make sure to unload loaded setup frame DMA map in dc_txeof and
   clear the mark of setup frame of the TX descriptor in dc_txeof().
 o Add check for possible TX descriptor overruns in dc_encap() and
   move check for free buffer to caller, dc_start_locked().
 o Swap the loaded DMA map and the last DMA map for multi-segmented
   frames. Since dc_txeof() assumes the last descriptor of the
   frame has the DMA map, driver should swap the first and the last
   DMA map in dc_encap(). Previously driver tried to unload
   not-yet-loaded DMA map such that the loaded DMA map was not
   unloaded at all for multi-segmented frames.
 o Rewrite DC_RXDESC/DC_TXDESC macro to simpler one.
 o Remove definition of ETHER_ALIGN, it's already defined in
   ethernet.h.

With this changes, dc(4) works with bounce buffers and it shall
also fix issues which might have shown in PAE environments.

Tested by:	marius
2011-02-19 02:47:10 +00:00
Pyun YongHyeon
a84b4e80ca Rearrange interrupt handler a bit and remove forever loop.
Previously dc(4) always checked whether there is pending interrupts
and this consumed a lot of CPU cycles in interrupt handler. Limit
the number of processing for TX/RX frames to 16. Also allow sending
frames in the loop not to starve TX under high RX load.
Reading DC_ISR register should be protected with driver lock,
otherwise interrupt handler could be run(e.g. link state change)
before the completion of dc_init_locked().

While I'm here remove unneeded code.
2011-02-19 01:37:28 +00:00
Pyun YongHyeon
76d40c8593 Send frames only when there is a valid link and driver is running
as well as controller has enough free TX descriptors.
Remove check for number of queued frames before attempting to
transmit. I guess it was added to allow draining queued frames
even if there is no link. I'm under the impression this type of
check should be done in upper layer. No other drivers in tree do
that.
2011-02-19 00:00:32 +00:00
Pyun YongHyeon
a5db292f7b Fix a long standing bug where driver handed over RX descriptor
ownership to controller before completion of access to the
descriptor. Driver is faking up status word so it should not give
ownership to controller until it completes RX processing.
2011-02-18 23:18:08 +00:00
Pyun YongHyeon
24507bc168 There is no need to execute filter configuration when driver is not
running. Remove wrong driver state change in dc_setfilt_xircom().
While I'm here nuke unnecessary assignments.
2011-02-18 23:08:05 +00:00
Pyun YongHyeon
52c43a473e Make sure to clear status word of TX descriptor in dc_list_tx_init().
Do not update if_opackets if the transmission had failed.
2011-02-18 22:58:46 +00:00
Pyun YongHyeon
06d23883e7 For controllers that have TX interrupt moderation capability,
request TX completion interrupt for every 8-th frames. Previously
dc(4) requested TX completion interrupt if number of queued TX
descriptors is greater than 64. This caused a lot of TX completion
interrupt under high TX load once driver queued more than 64 TX
descriptors. It's quite normal to see more than 64 queued TX
descriptors under high TX load.
This change reduces the number of TX completion interrupts to be
less than 17k under high TX load. Because this change does not
generate TX completion interrupt for each frame, add reclaiming
transmitted buffers in dc_tick not to generate false watchdog
timeouts.
While I'm here add check for queued descriptors in dc_txeof() since
there is no more work to do when there is no pending descriptors.
2011-02-18 20:38:05 +00:00
Pyun YongHyeon
93856bdece Remove use case of DC_TX_ONE. It was used to limit queue just 1 TX
frame in DM910x controllers. In r67595(more than 10 years ago) it
was replaced to use "Store and Forward" mode and made controller
generate TX completion interrupt for every frame.
2011-02-18 03:37:53 +00:00
Pyun YongHyeon
d314ebf548 Apply special PHY initialization code for 21143 controllers before
any other media configuration. Otherwise some 21143 controller
cannot establish a link. While I'm here remove the PHY
initialization code in dc_setcfg(). Since dc_setcfg() is called
whenever link state is changed, having the PHY initialization code
in dc_setcfg() resulted in continuous link flips.
After driver resets SIA, use default SIA transmit/receive
configuration instead of disabling autosense/autonegotiation.
Otherwise, controller fails to establish a link as well as losing
auto-negotiation capability. For manual media configuration, always
configure 21143 controller with specified media to ensure media
change. This change makes ANA-6922 establish link with/without
auto-negotiation.

While I'm here be more strict on link UP/DOWN detection logic.

Many thanks to marius who fixed several bugs in initial patch and
even tested the patch on a couple of dc(4) controllers.

PR:		kern/79262
Reviewed by:	marius
Tested by:	marius
2011-02-18 02:58:09 +00:00
Pyun YongHyeon
b289c60720 When driver have to use base softc due to lack of SROM on second
port, copy SROM information from base softc as well and run SROM
parser again.  This change is necessary for some dual port
controllers to make dc(4) correctly detect PHY media based on first
port configuration table.
While I'm here add a check for validity of the base softc before
duplicating SROM contents from base softc. If driver failed to
attach to the first port it can access invalid area.

PR:		kern/79262
Reviewed by:	marius
2011-02-18 02:14:53 +00:00
Pyun YongHyeon
abe4e86598 Always check memory allocation failure. If driver encounter memory
allocation error, do not attach driver.

Reviewed by:	marius
2011-02-18 01:56:25 +00:00
Marius Strobl
c6397d3f0e - Even after masking the media with IFM_GMASK the result may have bits
besides the duplex ones set so just comparing it with IFM_FDX may lead
  to false negatives.
- Just let the default case handle all unsupported media types.
- In pnphy_status() don't unnecessarily read a register twice.
- Remove unnused macros.

MFC after:	1 week
2011-01-14 20:26:59 +00:00
Marius Strobl
1636dde957 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

This file was missed in r213893.
2010-10-15 23:34:31 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Pyun YongHyeon
39d76ed635 It seems some multi-port dc(4) controllers shares SROM of the first
port such that reading station address from second port always
returned 0xFF:0xFF:0xFF:0xFF:0xFF:0xFF Unfortunately it seems there
is no easy way to know whether SROM is shared or not. Workaround
the issue by traversing dc(4) device list and see whether we're
using second port and use station address of controller 0 as base
station address of second port.

PR:		kern/79262
MFC after:	2 weeks
2010-10-14 17:22:38 +00:00
Marius Strobl
d7a9ad5688 Consistently always explicitly set IFM_HDX for half-duplex.
Obtained from:	OpenBSD (mostly)
2010-10-03 17:00:57 +00:00
Marius Strobl
de1add1e45 - In the spirit of previous simplifications factor out the checks for a
different PHY instance being selected and isolation out into the wrappers
  around the service methods rather than duplicating them over and over
  again (besides, a PHY driver shouldn't need to care about which instance
  it actually is).
- Centralize the check for the need to isolate a non-zero PHY instance not
  supporting isolation in mii_mediachg() and just ignore it rather than
  panicing, which should sufficient given that a) things are likely to
  just work anyway if one doesn't plug in more than one port at a time and
  b) refusing to attach in this case just leaves us in a unknown but most
  likely also not exactly correct configuration (besides several drivers
  setting MIIF_NOISOLATE didn't care about these anyway, probably due to
  setting this flag for no real reason).
- Minor fixes like removing unnecessary setting of sc->mii_anegticks,
  using sc->mii_anegticks instead of hardcoded values etc.
2010-10-02 18:53:12 +00:00
Marius Strobl
7b9a15f73c Use the mii_data provided via mii_attach_args and mii_pdata respectively
instead of reaching out for the softc of the parent.
2010-09-27 20:31:03 +00:00
Warner Losh
afa45c0763 cardbus -> CardBus 2010-01-03 23:28:32 +00:00
Warner Losh
a2d61e43c2 Fix CardBus spelling.
MFC after:	1 month
2010-01-03 23:15:14 +00:00
Martin Blapp
593a1aea1a Fix card/device names, no functional change
The ADMtek AN985 is the cardbus variant of ADMtek AN983
The Netgear FA511 is just a relabled ADMtek AN985

PR:		kern/50574
MFC after:	1 month
2010-01-03 13:59:59 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Attilio Rao
1abcdbd127 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
Marius Strobl
b54282f61e - Set MIIF_NOLOOP and don't add IFM_LOOP as loopback apparently isn't
supported with these pseudo-PHYs. The MIIF_NOLOOP flag currently triggers
  nothing but hopefully will be respected by mii_phy_setmedia() later on.
- Don't add IFM_NONE as isolation isn't supported by these pseudo-PHYs.
- Use mii_phy_add_media() instead of mii_add_media() so the latter can
  be eventually retired.
2009-03-19 22:34:55 +00:00
Warner Losh
155a83e87a remove now-redunant cardbus attachment. 2009-03-09 13:23:54 +00:00
Marius Strobl
155781198a - According to the corresponding Linux, NetBSD and OpenSolaris
drivers, there should be a 1us delay after every write when
  bit-banging the MII. Also insert barriers in order to ensure
  the intended ordering. These changes hopefully will solve the
  bus wedging occasionally experienced with DM9102A since r182461.
- Deobfuscate dc_mii_readreg() a bit.
2008-12-07 23:02:37 +00:00