r360139 made compiling with NO_HISTORY work. This #define does not remove
the fc and bind builtins completely but makes them always write an error
message.
However, there was also some code in builtins.def and mkbuiltins to remove
the fc builtin entirely (but not the bind builtin). The additional build
system complication to make this work seems not worth it, so remove that
code.
mips-gcc for mips32 was complaining that c was potentially used before
being set. Setting it to 0 before calling fdgetsc() looks like the right
thing to do in this instance; there's an explicit check for c == 0 later
on.
Tested: mips-gcc mips32 build, running /bin/sh on mips32
el is declared extern in myhistedit.h and defined in histedit.c. Remove the
duplicate definition in input.c to appease the -fno-common build.
-fno-common will become the default in GCC10/LLVM11.
MFC after: 3 days
Specifically, any system with a 32-bit size_t; -residue is calculated as a
32-bit *then* promoted to the 64-bit off_t and the result is ultimately
wrong. This resulted in what would appear to be truncated output, as only
the first line would be read.
Correct it by just making residue an off_t to begin with, since this is what
lseek will take anyways.
Reported by: antoine, dim
Triaged by: cem
Tested by: kevans
X-MFC-With: r358152
fd.
The read built-in command calls read(2) with a 1-byte buffer because
newline characters need to be detected even on a byte stream which
comes from a non-seekable file descriptor. Because of this, the
following script calls >6,000 read(2) to show a 6KiB file:
while read IN; do echo "$IN"; done < /COPYRIGHT
When the input byte stream is seekable, it is possible to read a data
block and then reposition the file pointer to where a newline
character found. This change adds a small buffer to do this and
reduces the number of read(2) calls.
Theoretically, multiple built-in commands reading the same seekable
byte stream in a single pipe chain can share the buffer. However,
this change just makes a single invocation of the read built-in
allocate a buffer and deallocate it every time for simplicity.
Although this causes read(2) to read the same regions multiple times,
the performance penalty should be small compared to the reduction of
read(2) calls.
Reviewed by: jilles
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23747
`cat -l` is needed during the installworld phase and other system's cat
don't support that flag. To avoid portability issues when compiling on
Linux/macOS (such as the the direct access to &fp->_mbstate), we
disable the entire multibyte support when building as a boostrap tool.
Reviewed By: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D13939
If getcwd() failed earlier on but later succeeded in the pwd builtin,
there was no INTOFF protection between calling savestr() and storing its
result.
It is quite rare for getcwd() to fail, and rarer for it to succeed later in
the same directory.
Found via code inspection for changing ckmalloc() and similar to assert
INTOFF protection instead of applying it directly (which protects against
corrupting malloc's internal state but allows memory leaks or double frees).
MFC after: 1 week
If executing a file fails with an [ENOEXEC] error, the shell executes the
file as a shell script, except that this execution may instead result in an
error message if the file is binary.
Per a recent Austin Group interpretation, we will need to change this to
allow a concatenation of a shell script and a binary payload. See
Austin Group bugs #1226 and #1250.
MFC after: 1 week
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
Normally, count=n means read(2) will be called n times on the input to dd. If
the read() returns short, as may happen when reading from a pipe, fewer bytes
will be copied from the input. With conv=sync the buffer is padded with zeros
to fill the rest of the block.
iflag=fullblock causes dd to continue reading until the block is full, so that
count=n means n full blocks are copied. This flag is compatible with illumos
and GNU dd and is used in the ZFS test suite.
Submitted by: Ryan Moeller
Reviewed by: manpages, mmacy@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21441
Sets the O_FSYNC flag on the output file. oflag=fsync and oflag=sync are
synonyms just as O_FSYNC and O_SYNC are synonyms. This functionality is
intended to improve portability of dd commands in the ZFS test suite.
Submitted by: Ryan Moeller
Reviewed by: manpages, mmacy@
MFC after: 1 week
Sponsored by: iXsytems, Inc.
Differential Revision: https://reviews.freebsd.org/D21422
close(2) can return errors from previous operations which should not be ignored.
PR: 229616
Submitted by: Thomas Hurst
Reported by: Thomas Hurst
Reviewed by: mmacy@
Obtained from: Ryan Moeller
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21376
The fdatasync flag performs an fdatasync(2) on the output file before closing it.
This will be useful for the ZFS test suite.
Submitted by: Ryan Moeller
Reviewed by: manpages, mmacy@
MFC after: 1 week
Sponsored by: iXSystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21373
The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21506
The fsync flag performs an fsync(2) on the output file before closing it.
This will be useful for the ZFS test suite.
Submitted by: ryan@ixsystems.com
Reviewed by: jilles@, imp@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
The RELEASE_CRUNCH check is redundant here. We don't need it for releases
anymore, and picobsd can control this more directly without making it a special
case.
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.
This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20031
newvers.sh has supported a variable setting only mode, use that in
preference to grep to future proof this script from changes there.
Differential Revision: https://reviews.freebsd.org/D19849
Since D19668 was done, new users of the -n flag have surfaced. Parse
and ignore it on the command line until they can be updated.
Suggested by: rgrimes (in D19668).
These were used to set dst flag and minutes west of UTC
respectively. These are obsolete and have been removed form the
kernel. These existed primarily to faithfully emulate early
Unix ABIs that have been removed from FreeBSD.
Reviewed by: jbh@, brooks@
Differential Revision: https://reviews.freebsd.org/D19550
The pipefail option allows checking the exit status of all commands in a
pipeline more easily, at a limited cost of complexity in sh itself. It works
similarly to the option in bash, ksh93 and mksh.
Like ksh93 and unlike bash and mksh, the state of the option is saved when a
pipeline is started. Therefore, even in the case of commands like
A | B &
a later change of the option does not change the exit status, the same way
(A | B) &
works.
Since SIGPIPE is not handled specially, more work in the script is required
for a proper exit status for pipelines containing commands such as head that
may terminate successfully without reading all input. This can be something
like
(
cmd1
r=$?
if [ "$r" -gt 128 ] && [ "$(kill -l "$r")" = PIPE ]; then
exit 0
else
exit "$r"
fi
) | head
PR: 224270
Relnotes: yes
SVN r342880 was designed to fix $((-9223372036854775808)) and things like
$((0x8000000000000000)) but also broke error detection for values of
variables without dollar sign ($((x))).
For compatibility, overflow in plain literals continues to be ignored and
the value is clamped to the boundary (except 9223372036854775808 which is
changed to -9223372036854775808).
Reviewed by: se (although he would like error checking to be removed)
MFC after: 2 weeks
X-MFC-with: r342880
Differential Revision: https://reviews.freebsd.org/D18926
The rest of this stuff is still to be discussed, but I think at this
point we have the agreement that the aliases should go.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
there's no need to even mention it in shell rc files. Not that it's wrong;
just pointless and somewhat misleading.
Reviewed by: jilles
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18809
The libedit "fout" output must be sent to fd 2 since it contains prompts
that POSIX says must be sent to fd 2. However, the libedit "ferr" output
receives error messages such as from "bind" that make no sense to send to fd
1.
results between an expression that refers to a variable by name and the
same expression that includes the same variable by value.
Submitted by: se@
MFC after: 1 week
if -z option also used.
Recommend the use of zip(1) if compressed files of predictable size needed.
PR: docs/41089
Submitted by: Sevan Janiyan
Reported by: areilly@bigpond.net.au
While here, pet igor
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D18686