Commit Graph

3577 Commits

Author SHA1 Message Date
Kyle Evans
b63d2d683d sh: fix read builtin on 32-bit systems
Specifically, any system with a 32-bit size_t; -residue is calculated as a
32-bit *then* promoted to the 64-bit off_t and the result is ultimately
wrong. This resulted in what would appear to be truncated output, as only
the first line would be read.

Correct it by just making residue an off_t to begin with, since this is what
lseek will take anyways.

Reported by:	antoine, dim
Triaged by:	cem
Tested by:	kevans
X-MFC-With:	r358152
2020-02-22 03:14:05 +00:00
Hiroki Sato
be860ca2a7 Improve performance of "read" built-in command when using a seekable
fd.

The read built-in command calls read(2) with a 1-byte buffer because
newline characters need to be detected even on a byte stream which
comes from a non-seekable file descriptor.  Because of this, the
following script calls >6,000 read(2) to show a 6KiB file:

 while read IN; do echo "$IN"; done < /COPYRIGHT

When the input byte stream is seekable, it is possible to read a data
block and then reposition the file pointer to where a newline
character found.  This change adds a small buffer to do this and
reduces the number of read(2) calls.

Theoretically, multiple built-in commands reading the same seekable
byte stream in a single pipe chain can share the buffer.  However,
this change just makes a single invocation of the read built-in
allocate a buffer and deallocate it every time for simplicity.
Although this causes read(2) to read the same regions multiple times,
the performance penalty should be small compared to the reduction of
read(2) calls.

Reviewed by:		jilles
MFC after:		1 week
Differential Revision:	https://reviews.freebsd.org/D23747
2020-02-20 03:01:27 +00:00
Xin LI
778ac8d371 Remove unused include.
MFC after:	2 weeks
2020-02-02 20:51:28 +00:00
Pawel Jakub Dawidek
d731a314d3 Restore previous usage presentation (without "pwait: " prefix).
Pointed out by:	jilles
2020-02-01 09:13:11 +00:00
Pawel Jakub Dawidek
9677354790 Style changes, mostly usage of braces around single line statements -
it is safer and allowed for some time now by style(9).

Sponsored by:	Fudo Security
2020-01-26 11:13:34 +00:00
Pawel Jakub Dawidek
dee496fc37 Implement tests for the newly added -o flag.
Sponsored by:	Fudo Security
2020-01-26 11:03:45 +00:00
Pawel Jakub Dawidek
2362bc2cf5 Implement -o flag which tells pwait(1) to exit if any of the given processes
has terminated.

Sponsored by:	Fudo Security
2020-01-26 11:02:51 +00:00
Pawel Jakub Dawidek
5e2e2222ae Don't setup a timeout if we are exiting.
Sponsored by:	Fudo Security
2020-01-26 10:54:16 +00:00
Pawel Jakub Dawidek
3f50bbaf51 Check for duplicated PID without using additional variable.
Sponsored by:	Fudo Security
2020-01-26 10:51:57 +00:00
Pawel Jakub Dawidek
532b3f4791 - Be consistent with using sysexits(3) codes.
- Turn fprintf()+exit() into errx().

Sponsored by:	Fudo Security
2020-01-26 10:49:24 +00:00
Alex Richardson
a33ee411d9 Allow building bin/cat on non-FreeBSD systems
`cat -l` is needed during the installworld phase and other system's cat
don't support that flag. To avoid portability issues when compiling on
Linux/macOS (such as the the direct access to &fp->_mbstate), we
disable the entire multibyte support when building as a boostrap tool.

Reviewed By:	brooks, emaste
Differential Revision: https://reviews.freebsd.org/D13939
2020-01-16 14:15:00 +00:00
Jilles Tjoelker
d3eae2a68e sh: Fix rare memory leak with SIGINT
If getcwd() failed earlier on but later succeeded in the pwd builtin,
there was no INTOFF protection between calling savestr() and storing its
result.

It is quite rare for getcwd() to fail, and rarer for it to succeed later in
the same directory.

Found via code inspection for changing ckmalloc() and similar to assert
INTOFF protection instead of applying it directly (which protects against
corrupting malloc's internal state but allows memory leaks or double frees).

MFC after:	1 week
2020-01-01 12:06:37 +00:00
Jilles Tjoelker
2a55bade0e sh: Test that executing various binary files is rejected
If executing a file fails with an [ENOEXEC] error, the shell executes the
file as a shell script, except that this execution may instead result in an
error message if the file is binary.

Per a recent Austin Group interpretation, we will need to change this to
allow a concatenation of a shell script and a binary payload. See
Austin Group bugs #1226 and #1250.

MFC after:	1 week
2019-12-30 21:32:55 +00:00
Simon J. Gerraty
2c9a9dfc18 Update Makefile.depend files
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files

Reviewed by:	 bdrewery
MFC after:	1 week
Sponsored by:   Juniper Networks
Differential Revision:  https://reviews.freebsd.org/D22494
2019-12-11 17:37:53 +00:00
Simon J. Gerraty
5ab1c5846f Add Makefile.depend.options
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend

DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options

See share/mk/dirdeps-options.mk

Reviewed by:	 bdrewery
MFC after:	1 week
Sponsored by:   Juniper Networks
Differential Revision:  https://reviews.freebsd.org/D22469
2019-12-11 17:37:37 +00:00
Matt Macy
b52c534bff Add iflag=fullblock to dd
Normally, count=n means read(2) will be called n times on the input to dd. If
the read() returns short, as may happen when reading from a pipe, fewer bytes
will be copied from the input. With conv=sync the buffer is padded with zeros
to fill the rest of the block.

iflag=fullblock causes dd to continue reading until the block is full, so that
count=n means n full blocks are copied. This flag is compatible with illumos
and GNU dd and is used in the ZFS test suite.

Submitted by:	Ryan Moeller
Reviewed by:	manpages, mmacy@
MFC after:	1 week
Sponsored by:	 iXsystems, Inc.
Differential Revision:	https://reviews.freebsd.org/D21441
2019-09-30 22:00:48 +00:00
Matt Macy
919156e34c Add oflag=fsync and oflag=sync capability to dd
Sets the O_FSYNC flag on the output file. oflag=fsync and oflag=sync are
synonyms just as O_FSYNC and O_SYNC are synonyms. This functionality is
intended to improve portability of dd commands in the ZFS test suite.

Submitted by:	Ryan Moeller
Reviewed by:	manpages, mmacy@
MFC after:	1 week
Sponsored by:	 iXsytems, Inc.
Differential Revision:	https://reviews.freebsd.org/D21422
2019-09-30 21:56:42 +00:00
Matt Macy
2048fe7098 dd: Check result of close(2) for errors
close(2) can return errors from previous operations which should not be ignored.

PR: 229616
Submitted by:	Thomas Hurst
Reported by:	Thomas Hurst
Reviewed by:	mmacy@
Obtained from:	Ryan Moeller
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D21376
2019-09-30 21:53:26 +00:00
Matt Macy
3b96efbda0 Add conv=fdatasync flag to dd
The fdatasync flag performs an fdatasync(2) on the output file before closing it.
This will be useful for the ZFS test suite.

Submitted by:	Ryan Moeller
Reviewed by:	manpages, mmacy@
MFC after:	1 week
Sponsored by:	iXSystems, Inc.
Differential Revision:	https://reviews.freebsd.org/D21373
2019-09-30 21:48:12 +00:00
Baptiste Daroussin
f370355791 Do not use our custom completion function, it is not needed anymore 2019-09-16 07:31:59 +00:00
Emmanuel Vadot
4c1a82cea5 pkgbase: Create a FreeBSD-utilities package and make it the default one
The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by:	bapt, gjb
Differential Revision:	https://reviews.freebsd.org/D21506
2019-09-05 14:15:47 +00:00
Matt Macy
ce1b19d8c8 Add conv=fsync flag to dd
The fsync flag performs an fsync(2) on the output file before closing it.
This will be useful for the ZFS test suite.

Submitted by:	ryan@ixsystems.com
Reviewed by:	jilles@, imp@
MFC after:	1 week
Sponsored by:	iXsystems, Inc.
2019-09-03 18:35:55 +00:00
Warner Losh
ab152d0263 Now that we have MK_LS_COLORS, we don't need RELEASE_CRUNCH check here.
The RELEASE_CRUNCH check is redundant here. We don't need it for releases
anymore, and picobsd can control this more directly without making it a special
case.
2019-07-15 07:35:46 +00:00
Bryan Drewery
c63c5ab001 Fix .depend files to work for build tools.
This is somewhat of a follow-up to r335746.

MFC after:	2 weeks
Sponsored by:	DellEMC
2019-06-15 17:08:13 +00:00
Stephen Hurd
705aad98c6 Some devices take undesired actions when RTS and DTR are
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.

This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.

Reviewed by:    imp
Differential Revision:  https://reviews.freebsd.org/D20031
2019-06-12 18:07:04 +00:00
Warner Losh
02e2acce1d Convert freebsd-version to using -v
newvers.sh has supported a variable setting only mode, use that in
preference to grep to future proof this script from changes there.

Differential Revision: https://reviews.freebsd.org/D19849
2019-05-23 17:19:00 +00:00
Warner Losh
8b82def341 Restore the -n flag parsing, but ignore it.
Since D19668 was done, new users of the -n flag have surfaced. Parse
and ignore it on the command line until they can be updated.

Suggested by: rgrimes (in D19668).
2019-04-24 05:24:10 +00:00
Edward Tomasz Napierala
fd5795b23a .Xr trim(8) from dd(1).
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2019-03-26 15:44:06 +00:00
Warner Losh
e77a99c1c1 Remove -n flag, fix setting date / time
r342139 bork setting the date. This fixes it by simply removing the -n
flag.

Differential Revision: https://reviews.freebsd.org/D19668
2019-03-21 06:47:23 +00:00
Warner Losh
ab87f59224 Remove the -d and -t flags from the man page
Remove -d and -t flags that were removed in r345050.

Noticed by: rgrimes@
2019-03-12 21:03:56 +00:00
Warner Losh
d24ba0bb86 Remove now useless -d and -t flags.
These were used to set dst flag and minutes west of UTC
respectively. These are obsolete and have been removed form the
kernel. These existed primarily to faithfully emulate early
Unix ABIs that have been removed from FreeBSD.

Reviewed by: jbh@, brooks@
Differential Revision: https://reviews.freebsd.org/D19550
2019-03-12 04:49:59 +00:00
Gordon Tetlow
244e58a2df Correct wording around '-' masks.
PR:		236407
Reported by:	Brian Saia
MFC after:	1 week
2019-03-09 00:30:13 +00:00
Jilles Tjoelker
56ada93f8a sh/tests: Improve failure messages of expansion/arith15.0 2019-03-07 22:51:58 +00:00
Jilles Tjoelker
484160a9cf sh: Add set -o pipefail
The pipefail option allows checking the exit status of all commands in a
pipeline more easily, at a limited cost of complexity in sh itself. It works
similarly to the option in bash, ksh93 and mksh.

Like ksh93 and unlike bash and mksh, the state of the option is saved when a
pipeline is started. Therefore, even in the case of commands like
  A | B &
a later change of the option does not change the exit status, the same way
  (A | B) &
works.

Since SIGPIPE is not handled specially, more work in the script is required
for a proper exit status for pipelines containing commands such as head that
may terminate successfully without reading all input. This can be something
like

(
        cmd1
        r=$?
        if [ "$r" -gt 128 ] && [ "$(kill -l "$r")" = PIPE ]; then
                exit 0
        else
                exit "$r"
        fi
) | head

PR:		224270
Relnotes:	yes
2019-02-24 21:05:13 +00:00
Jilles Tjoelker
94b793c497 sh: Send normal output from bind builtin to stdout
PR:		233343
Submitted by:	Yuichiro NAITO (original version)
2019-02-19 21:27:30 +00:00
Jilles Tjoelker
aac5464b61 sh: Restore $((x)) error checking after fix for $((-9223372036854775808))
SVN r342880 was designed to fix $((-9223372036854775808)) and things like
$((0x8000000000000000)) but also broke error detection for values of
variables without dollar sign ($((x))).

For compatibility, overflow in plain literals continues to be ignored and
the value is clamped to the boundary (except 9223372036854775808 which is
changed to -9223372036854775808).

Reviewed by:	se (although he would like error checking to be removed)
MFC after:	2 weeks
X-MFC-with:	r342880
Differential Revision:	https://reviews.freebsd.org/D18926
2019-02-10 22:23:05 +00:00
Edward Tomasz Napierala
719fd9fb2c Comment out the default sh(1) aliases for root, introduced in r343416.
The rest of this stuff is still to be discussed, but I think at this
point we have the agreement that the aliases should go.

MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2019-01-25 17:09:26 +00:00
Edward Tomasz Napierala
60315f8f9d Install .shrc for root, and set PS1 for the toor account.
Reviewed by:	jilles
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D18872
2019-01-24 23:34:51 +00:00
Edward Tomasz Napierala
d81ca439e7 Make sh(1) support \u in PS1. This removes one fork/exec on interactive
shell startup.

Reviewed by:	0mp (man page), jilles
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D18790
2019-01-24 11:59:46 +00:00
Edward Tomasz Napierala
ed1cfd30ce Don't mess with BLOCKSIZE in shell startup files - it's set by login.conf(5);
there's no need to even mention it in shell rc files.  Not that it's wrong;
just pointless and somewhat misleading.

Reviewed by:	jilles
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D18809
2019-01-20 22:08:49 +00:00
Jilles Tjoelker
f91d2e2171 sh: Send libedit "ferr" output to fd 2
The libedit "fout" output must be sent to fd 2 since it contains prompts
that POSIX says must be sent to fd 2. However, the libedit "ferr" output
receives error messages such as from "bind" that make no sense to send to fd
1.
2019-01-20 14:25:25 +00:00
Dag-Erling Smørgrav
a96301b673 Fix an edge case when parsing large numbers which resulted in inconsistent
results between an expression that refers to a variable by name and the
same expression that includes the same variable by value.

Submitted by:	se@
MFC after:	1 week
2019-01-09 09:36:54 +00:00
Jilles Tjoelker
993b1e419c sh: Add test for exported but unset variables
PR:		233545
2019-01-03 20:23:12 +00:00
Jilles Tjoelker
56f33d07ce sh: Do not place exported but unset variables into the environment
PR:		233545
Submitted by:	Jan Beich
Obtained from:	NetBSD
2019-01-03 20:22:35 +00:00
Chris Rees
64e8790d7e Add a note that the use of -B option does not guarantee a size of fragment
if -z option also used.

Recommend the use of zip(1) if compressed files of predictable size needed.

PR:			docs/41089
Submitted by:		Sevan Janiyan
Reported by:		areilly@bigpond.net.au

While here, pet igor

Reviewed by:		bcr
Differential Revision:	https://reviews.freebsd.org/D18686
2018-12-29 23:08:59 +00:00
Edward Tomasz Napierala
20c9381c98 Make sh(1) collapse $HOME into "~" in PS1.
Reviewed by:	jilles
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D18663
2018-12-28 17:51:40 +00:00
George V. Neville-Neil
53fc043d41 Remove, the now very outdated, timed.
Submitted by:	Kyle Spiers ksspiers at gmail
Reviewed by:	bcr,brooks,bz,sbruno
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D18505
2018-12-15 21:34:40 +00:00
Jilles Tjoelker
1becbc64f8 sh(1): Remove -c string from set builtin documentation
Altering the -c string at run time does not make sense and is not possible.

MFC after:	1 week
2018-12-08 12:49:19 +00:00
Sevan Janiyan
d7a570379b Clarify that /dev/kmem is not used.
Move cross ref to right place while here.

Submitted by:	kib
MFC after:	7 days
2018-12-03 20:01:51 +00:00
Sevan Janiyan
9588059256 Note these tools use kvm(3) and not procfs as in Solaris.
Obtained from:	NetBSD
MFC after:	7 days
2018-12-03 18:00:46 +00:00