Commit Graph

1559 Commits

Author SHA1 Message Date
Peter Wemm
5f0d05904c Add missing comment characters from wi driver description. 1999-05-06 18:08:23 +00:00
Nick Hibma
4ca710c5e2 Added USB HID devices major number.
Submitted by: MAEKAWA Masahide
1999-05-06 13:51:26 +00:00
KATO Takenori
bb0992d7ab Sync with sys/i386/conf/files.i386 revision 1.237. 1999-05-06 09:13:56 +00:00
John Birrell
785d2100dd Add the INIT_PATH option for embedded systems. 1999-05-05 12:22:31 +00:00
John Birrell
9775e37869 Add an INIT_PATH option to allow the init_path (for sys/kern/init_main.c)
to be customised in an embedded system which doesn't want to
run either init of sysinstall.
1999-05-05 11:24:15 +00:00
Bill Paul
31a08ab08e Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA
adapter (and some workalikes). Also add man pages and a wicontrol
utility to manipulate some of the card parameters.

This driver was written using information gleaned from the Lucent HCF Light
library, though it does not use any of the HCF Light code itself, mainly
because it's contaminated by the GPL (but also because it's pretty gross).
The HCF Light lacks certain featurs from the full (but proprietary) HCF
library, including 802.11 frame encapsulation support, however it has
just enough register information about the Hermes chip to allow someone
with enough spare time and energy to implement a proper driver. (I would
have prefered getting my hands on the Hermes manual, but that's proprietary
too. For those who are wondering, the Linux driver uses the proprietary
HCF library, but it's provided in object code form only.)

Note that I do not have access to a WavePOINT access point, so I have
only been able to test ad-hoc mode. The wicontrol utility can turn on
BSS mode, but I don't know for certain that the NIC will associate with
an access point correctly. Testers are encouraged to send their results
to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
Poul-Henning Kamp
f16bbd9770 Grab a char-major for dallas semiconductor one-wire bus. 1999-05-04 10:48:22 +00:00
Nick Hibma
b7b075a2a2 Add driver for the Iomega Zip 100 drive. 1999-05-02 21:54:05 +00:00
Nick Hibma
97f17d41f7 Change e-mail address 1999-05-02 21:52:15 +00:00
Peter Wemm
db7cb131d0 Disable second declaration of oltr0 - the first one (intended for isa) will
cause the device to be found on all busses, including pci.
1999-05-02 20:34:06 +00:00
Poul-Henning Kamp
d37ed5a03a Add a new "file" to procfs: "rlimit" which shows the resource limits for
the process.

PR:		11342
Submitted by:	Adrian Chadd adrian@freebsd.org
Reviewed by:	phk
1999-04-30 13:04:21 +00:00
Poul-Henning Kamp
75c1354190 This Implements the mumbled about "Jail" feature.
This is a seriously beefed up chroot kind of thing.  The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.

For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact:  "real virtual servers".

Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.

Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.

It generally does what one would expect, but setting up a jail
still takes a little knowledge.

A few notes:

   I have no scripts for setting up a jail, don't ask me for them.

   The IP number should be an alias on one of the interfaces.

   mount a /proc in each jail, it will make ps more useable.

   /proc/<pid>/status tells the hostname of the prison for
   jailed processes.

   Quotas are only sensible if you have a mountpoint per prison.

   There are no privisions for stopping resource-hogging.

   Some "#ifdef INET" and similar may be missing (send patches!)

If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!

Tools, comments, patches & documentation most welcome.

Have fun...

Sponsored by:   http://www.rndassociates.com/
Run for almost a year by:       http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
Mike Smith
f8dc47162a Allow loadable interface drivers with BPF support to be loaded into a kernel
that doesn't have it.  This is achieved by having minimal do-nothing stubs
enabled when there are no bpfilter devices configured.

Driver modules should be built with BPF enabled for maximum
convenience (but can be built without it for maximum performance).
1999-04-28 01:18:13 +00:00
KATO Takenori
949f91f87c Sync with sys/i386/conf/options.i386 revision 1.112. 1999-04-25 04:05:31 +00:00
KATO Takenori
c1327c0f76 Sync with sys/i386/conf/Makefile.i386 revision 1.148. 1999-04-25 04:04:24 +00:00
Peter Wemm
19477ba0b7 The fd options changed during new-bus. 1999-04-24 21:46:56 +00:00
Peter Wemm
5895e3c8ee De-quote where possible and minor tweaks. depends on a current config(8). 1999-04-24 21:45:44 +00:00
Peter Wemm
061eb3abb3 Bump configvers; when the updates to generic/lint get committed, the old
config has severe indigestion.
1999-04-24 21:38:50 +00:00
Peter Wemm
ea7b76b16b Drop tty/net/bio/cam interrupt class labels, it's meaningless here now. 1999-04-24 16:07:51 +00:00
KATO Takenori
742958ce9d Commented out adv_isa.c. 1999-04-24 04:22:57 +00:00
Peter Wemm
e0e77ef1c6 s/lkm(4)/kld(4)/ 1999-04-23 20:53:34 +00:00
Peter Wemm
6757ed7e26 Update VM86 comment - it's used for VESA too.
PR:		7976
Submitted by:	Stefan Eggers <seggers@semyam.dinoco.de>
1999-04-23 06:30:10 +00:00
Doug Rabson
344dbae494 Update VERSREQ. 1999-04-21 19:50:27 +00:00
Peter Wemm
713959259e Clean out most of the LKM stuff, the build support left a little while ago. 1999-04-20 14:33:24 +00:00
KATO Takenori
07a6f835ff Sync with sys/i386/conf/Makefile.i386 revision 1.147. 1999-04-20 09:07:19 +00:00
Peter Wemm
d95939af7a Zap LKM option and support. Farewell old friend. 1999-04-19 14:19:52 +00:00
Peter Wemm
db42d90829 unifdef -DVM_STACK - it's been on for a while for x86 and was checked
and appeared to be working for the Alpha some time ago.
1999-04-19 14:14:14 +00:00
Peter Wemm
f71c851c25 Drop the 'at nexus?' from the busses, it's not used.
Reactivate eisa0 and pnp0 in GENERIC, they work..  (eisa has been converted
but pnp still (for the most part) works the old way).
1999-04-19 11:53:36 +00:00
Brian Somers
23f7bd1706 Spelling police 1999-04-19 10:18:34 +00:00
KATO Takenori
c55a92c639 Sync with follwing files:
Path				Revision
i386/conf/GENERIC		1.162
i386/conf/Makefile.i386		1.146
i386/conf/files.i386		1.236
i386/conf/options.i386		1.111
i386/i386/machdep.c		1.329
i386/i386/userconfig.c		1.134
i386/isa/fd.c			1.135
i386/isa/if_ed.c		1.151
i386/isa/isa_dam.c		1.1
i386/isa/npx.c			1.67
isa/sio.c			1.224
dev/syscons/syscons.c		1.300
i386/isa/wd.c			1.194
isa/vga_isa.c           1.5
isa/atkbd_isa.c         1.3
isa/syscons_isa.c       1.2

Submitted by:	Takahashi Yoshihiro <nyan@wyvern.cc.kogakuin.ac.jp>
1999-04-18 14:42:20 +00:00
Peter Wemm
8da287cee8 oops, there was no tek390.c from the last commit, that's something on
one of Doug's machines apparently.
1999-04-17 00:06:24 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Nick Hibma
ec71ab8ec3 Remove the entries for umodem and ucom. These drivers only probe
and attach, nothing else. This is confusing to people.
1999-04-16 16:17:05 +00:00
Bruce Evans
e05da2e941 Made booting with -a work for all configurations. Previously it
only worked for configurations with "swap on generic".

usr.sbin/config/config.y:
- ignore all "swap [on] device ...' specifications except for
  warning about them.  They haven't done anything related to swap
  for almost 4 years, and were previously silently ignored,
  except for "swap on generic" which stopped swap${KERNEL}.c
  from being generated.  Code to support swapping is now deader
  than before.

usr.sbin/config/mkswapconf.c:
- don't generate a dummy setconf() function in swap${KERNEL}.c.

sys/i386/conf/files.i386:
- swapgeneric.c is now standard.  It should be merged into autoconf.c
  so that it doesn't conflict with swap${KERNEL}.c for kernels named
  "generic".

sys/i386/i386/autoconf.c:
- don't call setroot() for mfs roots.  Since setroot() doesn't do anything
  harmful, this was just a waste of time, except possibly for booting with
  -a it may have helped prevent an undesireable call to setconf() by
  finding a bogus rootdev.
- honor -a for ffs roots.  -a now overrides all other ways of specifying
  the root device.  Previously, -r had precedence over -a, and the -a
  handling was usually a no-op.
- don't honor -a for non-ffs roots, since it would currently just get in
  the way of a clean panic.

sys/i386/i386/swapgeneric.c:
- don't declare things that are now always declared in swap${KERNEL}.c.
  Don't decide things that are now decided in autoconf.c.  Code to
  support the "generic" case is now dead instead of useless.
1999-04-15 14:52:24 +00:00
Peter Wemm
7bf01a1401 Add example for 'makeoptions DEBUG' and some notes. I have not activated
it here since a -g LINT kernel is 100% useless as it won't run and hence
doesn't need debug capabilities (and would just waste disk space :-).
1999-04-14 16:54:00 +00:00
Peter Wemm
b9da114482 Build the functionality of the wdc_p hack into the ide_pci.c code.
All it did was match a specific device ID and turn on a quirk for
the wdc driver.

Incidently, at line 1462 there is a return that prevents the generic
ide_pci code from trying to look at the device.  I'd be interested
to know if we can take out the return and let the generic code "see" it.
I've left the return in because that's the way it worked before.

(Be sure to rerun config after cvsup or you'll get undefined files!)
1999-04-13 20:22:34 +00:00
Peter Wemm
3e3e4375c8 Shoot the LKM support in the old wd/wdc/atapi driver set in the head and
perform a cleanup/unifdef sweep over it to tidy things up.  The atapi
code is permanently attached to the wd driver and is always probed.

I will add an extra option bit in the flags to disable an atapi probe on
either the master or slave if needed, if people want this.

Remember, this driver is destined to die some time.  It's possible that
it will loose all atapi support down the track and only be used for
dumb non-ATA disks and all ata/atapi devices will be handled by the new
ata system.

ATAPI, ATAPI_STATIC and CMD640 are no longer options, all are implicit.

Previously discussed with:  sos
1999-04-13 19:38:12 +00:00
Peter Wemm
bdcedd79c5 Hopefully replicate the install.debug changes from the i386 version. 1999-04-13 18:35:28 +00:00
Peter Wemm
4e8691dc95 Clean up the kernel/kernel.debug/install.debug etc stuff.
Sense ${DEBUG} to decide on building kernel.debug or not.
Use a common install and install.debug target to minimize duplication.
(I deleted the ELF transition kernel warning, it was getting dated..)
1999-04-13 18:25:08 +00:00
Brian Somers
7b598cd2e7 ppp != iijppp any more
Mention nos-tun as a tun device user.
1999-04-12 09:45:29 +00:00
Nick Hibma
7dc1a5bd17 Make debugging more selective.
Remove debugging options from GENERIC
1999-04-11 20:53:50 +00:00
Greg Lehey
4357ca882d Back out default debug kernel. The flags revert to historical behaviour.
Requested-by:	ache
		bde
		dg

Modify targets for debug kernels:  when -g was specified, make will
now build a debug kernel called kernel.debug, and create a stripped
version called kernel at the same time.  The two targets install and
install.debug are otherwise unchanged.

Requested-by:	dillon

Update man page accordingly.
1999-04-11 03:40:11 +00:00
Nick Hibma
8f2a96f2cb uncomment the uhci entry 1999-04-10 15:23:12 +00:00
KATO Takenori
6b21bf93e7 Sync with sys/i386/conf/files.i386 revision 1.233. 1999-04-10 04:42:46 +00:00
Nik Clayton
c64aec80f8 Add a warning bout the SoundBlaster and ISA DMA locking up the machine,
and a possible workaround.

PR:		docs/5358
Submitted by:	Matthew Dillon
Reviewed by:	nik
1999-04-09 21:14:56 +00:00
Dag-Erling Smørgrav
5a00f36414 Allow setting MAXFILES in the kernel config. 1999-04-09 16:28:11 +00:00
Nick Hibma
5628cc3116 In preparation of the commit of the umass driver and to make life easier
for testers.
1999-04-08 17:58:07 +00:00
Greg Lehey
2005b07aa8 1. Modify config to issue different code for debugging.
2.  Config complains if you use -g:

    Debugging is enabled by default, there is no ned to specify the -g option

3.  Config warns you if you don't use -s:

    Building kernel with full debugging symbols.  Do
    "config -s BSD" for historic partial symbolic support.
    To install the debugging kernel, do make install.debug

    (BSD was the name of the config file I used; I print out the same
    name).

4.  Modify Makefile.i386, Makefile.alpha, Makefile.pc98 and config to
    work if a kernel name other than 'kernel' is specified.  This is
    not absolutely necessary, but useful, and it was relatively easy.
    I now have a kernel called /crapshit :-)

5.  Modify Makefile.i386, Makefile.alpha, Makefile.pc98 "clean" target
    to remove both the debug and normal kernel.

6.  Modify all to install the stripped kernel by default and the debug
    kernel if you enter "make install.debug".

7.  Update version number of Makefiles and config.
1999-04-07 09:28:03 +00:00
Mike Smith
90ea793afe Add i686_mem.c - memory range attribute support for P6 processors. 1999-04-07 03:55:36 +00:00
Bill Paul
d02c233129 Add driver support for gigabit ethernet adapters based on the Alteon
Networks Tigon 1 and Tigon 2 chipsets. There are a _lot_ of OEM'ed
gigabit ethernet adapters out there which use the Alteon chipset so
this driver covers a fair amount of hardware. I know that it works with
the Alteon AceNIC, 3Com 3c985 and Netgear GA620, however it should also
work with the DEC/Compaq EtherWORKS 1000, Silicon Graphics Gigabit
ethernet board, NEC Gigabit Ethernet board and maybe even the IBM and
and Sun boards. The Netgear board is the cheapest (~$350US) but still
yields fairly good performance.

Support is provided for jumbo frames with all adapters (just set the
MTU to something larger than 1500 bytes), as well as hardware multicast
filtering and vlan tagging (in conjunction with the vlan support in
-current, which I should merge into -stable soon). There are some hooks
for checksum offload support, but they're turned off for now since
FreeBSD doesn't have an officially sanctioned way to support checksum
offloading (yet).

I have not added the 'device ti0' entry to GENERIC since the driver
with all the firmware compiled in is quite large, and it doesn't really
fit into the category of generic hardware.
1999-04-06 17:08:31 +00:00