ping ICMP payload of packets being sent is increased with given step.
Sweeping pings are useful for testing problematic channels, MTU
issues or traffic policing functions in networks.
PR: bin/82625
Submitted by: Chris Hellberg <chellberg juniper.net> (with some cleanups)
to take into account the new default of starting the first partition
after the boot blocks instead of at sector 0. If you used automatic
sizing when the first partition did not start at 0, you would get
an error that the automatically sized partition extended beyond the
end of the disk.
Note that there are probably still many more complex cases where
automatic sizing and placement will not work (e.g. non-contiguous
or out of order partitions).
ignore "no such file" errors only, which I wanted to do.
Because of this I ignored all other errors on dlopen(3) failure as well,
which isn't good.
Fix this situation by calling access(2) on library file first and ignore
only ENOENT error. This allows to report all the rest of dlopen(3) errors.
MFC after: 3 days
metadata is equal to -1. if we then wanted to attach provider (or change
keys) and forget about '-p' flag it failed on assertion (quite ok, without
assertion it could call PKCS#5v2 with 4294967295 iterations).
Instead of failing on assertion, remind about '-p' flag.
MFC after: 3 days
* Correct handling of IPv6 Extension Headers.
* Add unreach6 code.
* Add logging for IPv6.
Submitted by: sysctl handling derived from patch from ume needed for ip6fw
Obtained from: is_icmp6_query and send_reject6 derived from similar
functions of netinet6,ip6fw
Reviewed by: ume, gnn; silence on ipfw@
Test setup provided by: CK Software GmbH
MFC after: 6 days
capture. Zero length captures caused an infinte loop and short captures
probably caused memory corruption and a crash.
Reported by: many
MFC After: 3 days
accept NUL-terminated strings as required by RFC 2132.
This solution is not perfect as it removes the ability to send
NUL-terminated host-name options which may be required by some broken
servers. Given the current lack of an existance proof of such servers
and the fact that servers that send NUL-terminated domain names do
exist, this seems like an acceptable compromise. A discussion of these
issues can be found at:
http://marc.theaimsgroup.com/?l=dhcp-client&m=96837107208382&w=2
PR: bin/83468
Reported by: Sean Winn <sean at gothic dot net dot au>
MFC-after: 3 days
print potentially sensitive keying material to stdout. With the new
802.11 support, ifconfig(8) is now capable of printing 802.11 keys,
and did by default for the root user, which is undesirable in some
environments. Now it will not print keying material unless requested
(and available to the user).
MFC after: 1 week
from this socket
* Enable non-blocking I/O on devd.pipe to keep clients from wedging devd.
If a write(2) on devd.pipe would block, the client in question will be
removed [1]
Requested by: rwatson [1]
Approved by: imp
Change communication protocol to be much more resistant on network
problems and to allow for much better performance.
Better performance is achieved by creating two connections between
ggatec and ggated one for sending the data and one for receiving it.
Every connection is handled by separeted thread, so there is no more
synchronous data flow (send and wait for response), now one threads
sends all requests and another receives the data.
Use two threads in ggatec(8):
- sendtd, which takes I/O requests from the kernel and sends them to the
ggated daemon on the other end;
- recvtd, which waits for ggated responses and forwards them to the kernel.
Use three threads in ggated(8):
- recvtd, which waits for I/O requests and puts them onto incoming queue;
- disktd, which takes requests from the incoming queue, does disk operations
and puts finished requests onto outgoing queue;
- sendtd, which takes finished requests from the outgoing queue and sends
responses back to ggatec.
Because there were major changes in communication protocol, there is no
backward compatibility, from now on, both client and server has to run
on 5.x or 6.x (or at least ggated should be from the same FreeBSD version
on which ggatec is running).
For Gbit networks some buffers need to be increased. I use those settings:
kern.ipc.maxsockbuf=16777216
net.inet.tcp.sendspace=8388608
net.inet.tcp.recvspace=8388608
and I use '-S 4194304 -R 4194304' options for both, ggatec and ggated.
Approved by: re (scottl)
include a space seperated list of domains instead of the domain of the
host. This is supported on too many platforms to break for now so,
remove validation of this option for the moment.
The correct solution longer term is to implement RFC 3397 support and
then treat domain-name options containing space seperated lists of
domains as domain-search options for backwards compatability.
Approved by: re (dhclient blanket)
Add a -b option to background immediatly.
Add support for 802.11 routing messages to "instantly" renegotiate
at lease when we associate with a new network.
Submitted by: sam
spanning tree support.
Based on Jason Wright's bridge driver from OpenBSD, and modified by Jason R.
Thorpe in NetBSD.
Reviewed by: mlaier, bms, green
Silence from: -net
Approved by: mlaier (mentor)
Obtained from: NetBSD
policy. It may be used to provide more detailed classification of
traffic without actually having to decide its fate at the time of
classification.
MFC after: 1 week
This is the last requirement before we can retire ip6fw.
Reviewed by: dwhite, brooks(earlier version)
Submitted by: dwhite (manpage)
Silence from: -ipfw
use of the macro in sbin/mount*'s, by replacing:
mopts[] = {
MOPT_STDOPTS,
{ NULL }
}
With:
mopts[] = {
MOPT_STDOPTS,
MOPT_NULL
}
This change will help to reduce the situation that we don't explicitly
initialize "struct mntopt"'s. It should not contribute to any
functional/logical changes as far as I can tell.
command line) and the device path (what we passed to open()). Use
the former in diagnostics.
- when adding or removing partitions, print a single line to stdout for
each partition that was added or removed, indicating its name.
- add an -a option to 'gpt remove' which must be explicitly specified
to remove all partitions.
Approved by: marcel (in prinicple)
MFC after: 2 weeks
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
report on the status of a format already running on a drive.
Fix status reporting for 'camcontrol format'. This was broken in rev 1.34
of camcontrol.c, almost 4 years ago!
Submitted by: joerg (most of the reportonly changes)
MFC after: 3 days
This unbreaks "/rescue/mount -t foo" -- previously it was necessary to
explicitly call "/rescue/mount_foo".
Hints from: gordon
X-MFC after: 3 days (if approved by re@)
.depends other then the commant line.
Also remove -g from CFLAGS. The user should add it to CFLAGS if they
desire debug support.
Reviewed by: ru (in concept)
MFC After: 7 days
based tapes, but I'm not sure where NFS_MAGIC was introduced after
4.3). When support for the pre-4.4 format was removed (the ability to
read 4.2 and 4.3 BSD tapes), the old format inode conversion was
junked as well. However, FreeBSD 1 dump tapes use the NFS_MAGIC
format, but have this inode format. Before, restore would fail
complaining that '.' wasn't found and the root directory wasn't on
this tape. Since the conversion from the not so old format is
relatively trivial, restore the code to make that conversion.
FreeBSD 1 dumps are once again readable.
MFC After: a few days
for the old (4.4-lite through FreeBSD 4.x and *BSD) format. It looks
like they aren't used for TS_INODE, but conversion costs so little
there that I've not removed them there (in case my grep was wrong).
This makes at least some of the tapes work for me again. Now, to
regresion test all my dusty tapes...
usage for a subcommand, so no 'usage' function has to be implemented
in class library.
- Bump version number as it breaks ABI, but don't provide backward
compatibility, because there are probably no external consumers of this
geom(8).
This allows to print more precise usage for standard commands and simplify
class libraries a bit.
MFC after: 1 week
warning on 64-bit platforms. Explicitly cast these values to int
to work around this issue, as these values are tend to be small.
Spotted by: ia64 tinderbox
providers.
This prevents from listing geoms like <name>.sync which can be confusing.
It still allows to show details about it by giving its name when listing.
MFC after: 1 week
