Commit Graph

64 Commits

Author SHA1 Message Date
Stefan Eßer
10e966fae4 Add support for ioctl() accesses to PCI config space registers.
Garrett Wollman sent me this code a few weeks ago for review, and I made
some significant changes, which he in turn accepted ...

In order to make use of these changes, a device entry has to added to /dev.

Submitted by:	wollman
1996-10-22 20:20:14 +00:00
Stefan Eßer
b86a81e448 pci_map_mem() did a too restrictive check on the mapping type:
PCI_MAP_MEMORY_TYPE_32BIT_1M should be accepted as well as
PCI_MAP_MEMORY_TYPE_32BIT (and now is).
(Problem reported by David Greenman.)
1996-10-14 13:04:34 +00:00
Bruce Evans
b568ea4e01 Removed more devconf leftovers. 1996-09-10 23:31:13 +00:00
Poul-Henning Kamp
40f3771f7f Various cleanups for remanents of devconf. 1996-09-08 10:44:18 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
Stefan Eßer
77b3da75e6 Fix code that deals with multiple host to PCI bridges by making the next
one use the highest seen bus number plus 1 as its starting point.
1996-09-05 21:28:51 +00:00
Stefan Eßer
7fa8a688aa Add preliminary support for the Orion PCI chip set. It is special in the
way it attaches multiple PCI buses directly to the CPU, instead of having
them hanging off from PCI to PCI bridges. This code is a hack, and will
be obsoleted by the planned rework of the PCI code, which will change the
dealing with PCI to PCI bridges and other special devices significantly.

The patch also adds a kern_devconf entry for PCI bus 0 which is assumed
to be a child of cpu0. The new PCI code will make it possible to hand out
the kern_devconf structure to a pci device being attached, since this is
(regretably, IMHO) required by a few ISA devices.

Finally there are new PCI ids for some Intel chip set devices, which had
already been known to 2.1.5R, but did not make it into -current. This closes
"kern/1558: PCI probe seems to have lost a device in -current".
1996-09-02 21:23:06 +00:00
Satoshi Asami
58e025d580 Scan PCI buses in order the BIOS has assigned them. This is sometimes
necessary to boot from a SCSI disk connected to a twin-channel adapter,
and you have multiple of them (disks and adapters).

Reviewed by:	se
1996-06-09 11:58:19 +00:00
Stefan Eßer
4beaf036a6 Fix range check to actually test the variable that will be used as
an index later.

Submitted by:	Erich Stefan Boleyn <erich@uruk.org>
1996-05-18 17:32:20 +00:00
Satoshi Asami
f8176d838c Fix logic bug in pci bridge code. For a PCI-PCI bridge, secondary
should be <= than subordinate, not the other way around.

They are both true if the bridge is not cascaded (i.e., twin-channel
scsi/e-net adapters won't be affected by this bug), which is probably why
it was unnoticed until today.
1996-04-25 06:04:27 +00:00
Stefan Eßer
68159c8901 Update PCI bus code from my current sources:
- always use pci_conf_read() and pci_conf_write(). (This is required to
  simulate non-existant devices in my system for PCI bridge code tests.)

- reorder some functions (put the main functions at the end).

- correct off by one bug in the code dealing with unitialized PCI to PCI
  bridge chips. (Bug found by ASAMI Satoshi.)

- print function number for multi-function devices.
1996-04-14 20:14:36 +00:00
Bruce Evans
3157adc8af Removed now-unused #includes of <machine/cpu.h>. They were for bootverbose
being declared in the wrong place.
1996-04-07 17:32:42 +00:00
Bruce Evans
ede8dc43a2 Fixed unsigned longs that should have been vm_offset_t.
vm_offset_t is currently unsigned long but should probably be plain
unsigned for i386's to match the choice of minimal types to represent
for fixed-width types in Lite2.  Anyway, it shouldn't be assumed
to be unsigned long.

I only fixed the type mismatches that were detected when I changed
vm_offset_t to unsigned.  Only pointer type mismatches were detected.
1996-03-19 15:03:00 +00:00
Stefan Eßer
8ec7a852b0 Remove limit of port I/O addresses to 65K, since PCI specifies 32 bit
port addresses (even though the PC architecture doesn't support them).

Add code to limit the I/O map size based on the lowest set bit of the
address. This cures the problem with the BT946C only having a 16 bit
map register, in voiolation of the PCI specs, without giving up the
general support of >65K port regions.
1996-02-19 00:30:40 +00:00
Stefan Eßer
07d9d14a55 Add generic PCI to PCI bridge support.
Improve verbose boot messages for unidentified chips.
1996-02-17 23:57:04 +00:00
Stefan Eßer
dcf289cdb5 Add heuristic to detect multi-function devices that don't announce this
feature in the header type register, though it is required by the PCI spec.
This should correctly probe both functions of the Intel 82371FB chip,
without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
Garrett Wollman
31c5632840 Decode configuration for the IDE part of the Triton chipset. This
includes a hack in the probe code: the 82371FB is a multifuction
device, but doesn't properly set the configuration bit which
indicates this.  So, we just hard-wire all 82371FBs as multifunction
devices.

This does not actually make the bus-master IDE stuff work, although
if anyone wants to work on that, I have the databooks that tell
how to use it.
1996-01-27 20:14:32 +00:00
Stefan Eßer
e653d76e96 Add support for multi-function devices. 1996-01-25 18:32:00 +00:00
Stefan Eßer
dd7610fca4 Make PCI interrupt handlers return void like everybody else does.
Reviewed by:	davidg
1996-01-23 21:48:28 +00:00
Stefan Eßer
b23345605d Fix bad typo: > was used instead of >> ...
Submitted by:	Matt Thomas <matt@lkg.dec.com>
1996-01-19 19:03:47 +00:00
Stefan Eßer
e66a4e401d Improve PCI probe messages by printing the bus number.
Add missing newline to PCI to PCI bridge message.

Submitted by:	Matt Thomas <matt@lkg.dec.com>
1996-01-19 19:01:19 +00:00
Bruce Evans
6ea3e9d839 Completed function declarations and/or added prototypes and/or added
#includes to get prototypes.

pci now uses a different interrupt handler type for interrupts that it
dispatches and the isa interrupt handler type for the interrupts that
it handles.
1995-12-16 00:27:59 +00:00
Stefan Eßer
6549c8c929 Fix the off-by-one error in the calculation of the valid port range.
Reduce default value of pcicb_membase to 0x2000000 (from 0x4000000)
since this seems to be the lower bound used by many systems.

Submitted by:	Mihoko Tanaka <m_tanaka@pa.yokogawa.co.jp>
1995-12-15 13:40:20 +00:00
Poul-Henning Kamp
f708ef1b9e Another mega commit to staticize things. 1995-12-14 09:55:16 +00:00
David Greenman
efeaf95a41 Untangled the vm.h include file spaghetti. 1995-12-07 12:48:31 +00:00
Stefan Eßer
94fed3c149 Set default burst length limit to 32 bytes, since this seems to be
an acceptable value for all current chip sets (just a hint to PCI
device drivers, used in the NCR driver, for example).
Add PCI Vendor ID of ACER.
1995-12-06 15:52:23 +00:00
Bruce Evans
8be8b2a157 Made pci.c compile again. It unfortunately depends on the isa interrupt
interface.  Adding prototypes just made the dependency explicit.
1995-11-21 13:59:56 +00:00
Bruce Evans
512fef80a9 Completed function declarations and/or added prototypes. 1995-11-21 12:55:26 +00:00
Poul-Henning Kamp
4b2af45f4b Mega commit for sysctl.
Convert the remaining sysctl stuff to the new way of doing things.
the devconf stuff is the reason for the large number of files.
Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
David Greenman
df31aac551 Fixed bug where wrong thing was being checked for NULL before calling
free(), resulting in a panic. This happend whenever an irq had already
been allocated by another device (like something on the ISA bus).
1995-10-02 13:43:11 +00:00
Stefan Eßer
da42a6e8f3 Add vendor ID of Compaq, now that I found what it is ... 1995-09-14 23:24:29 +00:00
Stefan Eßer
7324a7b336 Minor changes to the PCI probe messages. 1995-09-14 13:09:40 +00:00
Stefan Eßer
ab2e900f6b Make mapping messages depend on bootverbose flag.
Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
David Greenman
fa8d3a82f4 Initialize "name" to quiet compiler. 1995-07-29 18:21:48 +00:00
Stefan Eßer
bd919217cf Add a few vendor IDs. 1995-07-27 21:56:51 +00:00
Stefan Eßer
54a2163437 Get rid of references to the linker supplied set length field.
Use the terminating NULL pointer as the end of list marker instead.
1995-07-27 21:38:45 +00:00
Stefan Eßer
c411726b79 Change message "not supported" to "no driver assigned", because
people tend to assume their devices won't work if they see this
message, though it may indicate that those devices just don't
need any PCI driver (e.g. devices that emulate an ISA card, or
that have been initialised by the BIOS and need no further care).
1995-06-28 16:32:54 +00:00
Stefan Eßer
78e444665c Failure of the consistency checks for BIOS assigned mappings of busses
connected via PCI to PCI bridges is considered non fatal for now.
1995-06-28 15:59:04 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
David Greenman
cbb15d7c97 bzero the malloced pci_devconf structure. This should fix the problem with
several of freefall's recent crashes.
1995-05-04 06:57:11 +00:00
Bruce Evans
f0d47944e2 Forward-declare kern_devconf for use in a prototype. Some drivers
include <pci/pcivar.h> without including <sys/devconf.h> and other
drivers include <pci/pcivar.h> before including <sys/devconf.h> if
certain identifiers are defined.

The devconf headers have convoluted interdependencies.  <sys/devconf.h>
includes <machine/devconf.h> which includes <pci/pcivar.h>.  Most
drivers include <sys/devconf.h> so even isa drivers depend on
<pci/pcivar.h>.  For similar reasons, most drivers depend on another
pci header, on an isa header and on two scsi headers.
1995-03-25 21:10:38 +00:00
David Greenman
a54907a1a7 Restore my changes to initialize the kdc_shutdown routine pointer. Stefan
clobbered it in his previous commit and not having it causes the machine
to panic during reboot (as well as not doing the important shutdown callout).
1995-03-23 06:14:44 +00:00
Stefan Eßer
8673e05a9a Completely new PCI code:
1) Supports PCI to PCI bridge devices (and tries to initialise them,
   even if the BIOS is brain dead).
2) Supports shared PCI interrupts. Interrupt handlers now MUST return
   '0' if they found nothing to do, '1' otherwise.

New features tested with i486 systems based on the Intel Saturn and
a DEC 4channel Ethernet card only, but expected to work on most systems.

The option PCI_REMAP has been removed !

Submitted by:	Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
David Greenman
cb09d35cb0 Added a new field to the pci_device struct called pd_shutdown to specify
a device specific shutdown routine for devconf. Assign the value of this
to the kern_devconf struct. Implement a device shutdown routine for if_de
that disables the device. This will stop the device from corrupting memory
after a reboot.
1995-03-17 04:27:21 +00:00
Stefan Eßer
79a6470e10 Speed up PCI attach code by ommiting test if its result is ignored anyway. 1995-03-02 21:51:53 +00:00
Stefan Eßer
04dbb40865 First try to add support for PCI-PCI bridge chips (written for the
DEC 21050 chip in particular, don't have specs of other such chips).

This should add support for Multiple-Ethernet PCI cards (e.g. Znyx 314).

Reviewed by:	se
Submitted by:	<wolf@kintaro.cologne.de> Wolfgang Stanglmeier
1995-02-27 17:17:14 +00:00
Stefan Eßer
ef2dee21dc Deal with systems, that lack a fully decoded PCI configuration space.
Submitted by:	<wolf@kintaro.cologne.de> Wolfgang Stanglmeier
1995-02-25 17:26:22 +00:00
Stefan Eßer
d9dc2f74ef New PCI attach code:
PCI BIOS mappings are retained, except if option PCI_REMAP
is specified in the kernel config file.
There is now a list of attach addresses, and the first
address that seems to make some device registers appear
is chosen.

Reviewed by:	se
Submitted by:	wolf
1995-02-22 14:17:15 +00:00
Stefan Eßer
9ddf96998e ncr.c:
New config option "NCR_IOMAPPED" makes the driver use port I/O.
Put back in 53c815 defines, submitted by Mikael Hybsch <micke@dynas.se>.
These had got lost between cvs rev. 1.14 and now ...

pci.c:

Really write config space register.
Assign ports starting at 0xbc00.

Submitted by:	wolf
Reviewed by:	se
1995-02-14 23:33:38 +00:00
Poul-Henning Kamp
a14b2c282e YFfix 1995-02-14 06:19:23 +00:00