Commit Graph

428 Commits

Author SHA1 Message Date
Scott Long
d0885ac3cf Glue the arcmsr driver into the tree. 2005-03-31 20:21:43 +00:00
Maxim Sobolev
6bcf003260 Add USB Communication Device Class Ethernet driver. Originally written for
FreeBSD based on aue(4) it was picked by OpenBSD, then from OpenBSD ported
to NetBSD and finally NetBSD version merged with original one goes into
FreeBSD.

Obtained from:  http://www.gank.org/freebsd/cdce/
                NetBSD
                OpenBSD
2005-03-22 14:52:40 +00:00
Murray Stokely
991f5121f0 Add a comment to note that pseudo-device bpf is required for DHCP.
This is mentioned in the Handbook but it is not as obvious to new
users why bpf is needed compared to the other largely self-explanatory
items in GENERIC.

PR:		conf/40855
MFC after:	1 week
2005-03-18 15:24:00 +00:00
David E. O'Brien
bf6fabdd60 Make it clear nve needs mii, and shorten long comment line. 2005-03-16 20:23:31 +00:00
Ian Dowse
7fe25a5726 Enable ehci by default on i386 and amd64. It had got to the stage
where having this disabled was actually hurting us, since so many
BIOSes include legacy USB emulation that takes control of all usb
ports and only the ehci driver knows how to disable it.
2005-03-16 02:34:50 +00:00
David E. O'Brien
1b1a07ad8b FreeBSD consumer bits of the nForce MCP NIC binary blob.
Demanded by:	DES
Encouraged by:	scottl
Obtained from:	q@onthenet.com.au (partially)
KNF'ed by:	obrien
2005-03-12 00:29:30 +00:00
Jun Kuriyama
6f4e528a8e o Use tab instead of spaces for puc(4) line.
o Use capitalized "Ethernet" for consistency.
2005-01-05 05:25:21 +00:00
John Baldwin
7174b63b19 - Indent the comments beside the SMP options to the same level as all the
other comments.  Clarify that the next two things needed for SMP are
  two lines.
- Expand mii abbreviation to miibus for clarity in the USB ethernet
  comment.
2004-12-30 15:30:23 +00:00
Andre Oppermann
32672ba88d Reduce annoying SCSI probing delay from 15 to 5 seconds in all GENRIC kernels.
Discussed on:	-current
2004-11-02 20:57:20 +00:00
Scott Long
085f35d6f3 Hook the hptmv driver up to the build. 2004-10-24 08:53:40 +00:00
Matt Jacob
b3940a8730 Put in a commented out ispfw device under isp and note that this is usually
a module.
2004-09-19 00:52:22 +00:00
Bill Paul
a07bd003bf Add device driver support for the VIA Networking Technologies
VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY.
The vge driver has been added to GENERIC for i386, pc98 and amd64,
but not to sparc or ia64 since I don't have the ability to test
it there. The vge(4) driver supports VLANs, checksum offload and
jumbo frames.

Also added the lge(4) and nge(4) drivers to GENERIC for i386 and
pc98 since I was in the neighborhood. There's no reason to leave them
out anymore.
2004-09-10 20:57:46 +00:00
Scott Long
4ef90982ca Fix a cut-n-paste glitch with SCHED_4BSD. 2004-09-07 22:44:55 +00:00
Scott Long
444ba94513 Switch the default scheduler to 4BSD to match what will go into RELENG_5 soon.
It can be switched back once 5.3 is tested and released.  Also turn on
PREEMPTION as many of the stability problems with it have been fixed.

MT5: 3 days.
2004-09-07 22:37:43 +00:00
Andre Oppermann
c21fd23260 Always compile PFIL_HOOKS into the kernel and remove the associated kernel
compile option.  All FreeBSD packet filters now use the PFIL_HOOKS API and
thus it becomes a standard part of the network stack.

If no hooks are connected the entire packet filter hooks section and related
activities are jumped over.  This removes any performance impact if no hooks
are active.

Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
Robert Watson
b505f47bef Add ADAPTIVE_GIANT to GENERIC on i386, with the intent of making it
a standard configuration similar to [NO_]ADAPTIVE_MUTEXES.  This
feature causes Giant to be included in the set of mutexes adaptively
spun on.  It appears to have a positive effect on performance on SMP
across several workloads, including measurements of a 16% improvement
on buildworld, and 30%+ improvement for MySQL using the supersmack
benchmark with Giant over the network stack; a 6% improvement without
Giant on the network stack (as a result of less giant contention).
2004-08-11 01:34:18 +00:00
Warner Losh
e0eb3c19a7 Remove commented out pcic driver. It is too broken to work (even if you
fix the obvious bugs, nastier ones reside below the surfac), and having
it commented out here just encourages people to try it.

# I'm not removing it from the base system, yet.
2004-08-09 17:36:19 +00:00
Mark Murray
d23a262fc5 Making a loadable null.ko for /dev/(null|zero) proved rather
unpopular, so remove this (mis)feature.

Encouragement provided by:	jhb (and others)
2004-08-03 19:24:54 +00:00
Mark Murray
b6527a3667 Add the I/O device for those architectures that have it. 2004-08-01 19:37:34 +00:00
Mark Murray
e54788c73d Remove local hack that was not supposed to be committed.
Spotted by:	Antoine Brodin - antoine dot brodin at laposte dot net
2004-08-01 18:12:25 +00:00
Mark Murray
8ab2f5ecc5 Break out the MI part of the /dev/[k]mem and /dev/io drivers into
their own directory and module, leaving the MD parts in the MD
area (the MD parts _are_ part of the modules). /dev/mem and /dev/io
are now loadable modules, thus taking us one step further towards
a kernel created entirely out of modules. Of course, there is nothing
preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
Maxim Konovalov
aa355a2679 In -CURRENT pseudo devices are not statically assigned at compile time,
remove a stale comment.

PR:		kern/62285
2004-07-18 09:03:12 +00:00
Marcel Moolenaar
8bcb1e9e84 Add options KDB and GDB. KDB takes on the function of what DDB used
to be. Both DDB and GDB specify which KDB backends to include.
2004-07-11 03:20:09 +00:00
Tony Ackerman
e03f8cdc4f First release of ixgb driver for the Intel(R) PRO/10GbE Family of Adapters. This driver has
been developed for use with FreeBSD, version 4.8 and later.

Submitted by:	Hema Joyce
Reviewed by: 	Prafulla Deuskar
Approved by: 	Prafulla Deuskar
MFC after:	1 week
2004-05-28 00:23:00 +00:00
Marcel Moolenaar
d1d9feac7c Add option GEOM_GPT. This brings the ability to have a large number of
partitions on a single disk.
2004-05-02 20:40:19 +00:00
David E. O'Brien
4e744b5e7f Spell Ethernet correctly. 2004-05-02 18:57:29 +00:00
Maxim Sobolev
e99eef3d4f Add rue(4) USB ethernet driver, which for some reason has been missed. 2004-04-26 22:52:09 +00:00
Warner Losh
22391e1540 Remove npx(4) reference for isa. While true, it is useless (since
there are a lot of other dependencies that preclude the kernel from
working).  Instead, have a more generic note that isa should not be
removed.  This should be less confusing for users.
2004-04-22 15:17:39 +00:00
Josef El-Rayes
2e30742814 Add note that npx depends on isa.
Approved by:	green
2004-04-15 15:11:04 +00:00
Vinod Kashyap
99635d6cdd Initial check-in of the device driver for 3ware's 9000 series
PATA/SATA RAID controllers.  This driver is a SIM under CAM, and
so, behaves like a driver for a SCSI controller.
2004-03-30 03:46:00 +00:00
David E. O'Brien
a5b0d49470 Shorten a long comment. 2004-03-15 00:49:40 +00:00
Jens Schweikhardt
08e33a7ff1 Consistently capitalize acronyms like POSIX and NIC. Style. 2004-01-29 21:24:53 +00:00
Jeff Roberson
048ac395be - Recruit some new ULE users by making it the default scheduler in GENERIC.
ULE will be in a probationary period to determine whether it will be left
   as the default in 5.3 which would likely mean the rest of the 5.x series.
2004-01-24 21:38:52 +00:00
Jacques Vidrine
5864cda7c6 Add PFIL_HOOKS to the GENERIC kernel configuration, primarily so
that one can load the IPFilter module (which requires PFIL_HOOKS).

Requested by:	Many, for over a year
2004-01-24 14:59:51 +00:00
John Baldwin
8eca42d505 - Reenable building of the ACPI module on i386.
- Remove 'device acpi' from i386 GENERIC and revert back to using ACPI as
  a module by default.

Approved by:	re (scottl / blanket)
2003-12-03 21:13:06 +00:00
John Baldwin
4443619c83 - Enable SMP and 'device apic' by default.
- Compile 'device acpi' into GENERIC by default as well.  Note that
  the beastie loader menu item to disable ACPI still works if ACPI is
  compiled into the kernel.
2003-11-03 22:48:25 +00:00
Joerg Wunsch
9678710b1f Mention the puc(4) glue driver in a commented-out example so the user
of "dumb" PCI-based serial/parallel boards get a hint how to enable
them.

I wasn't sure about the ia64, pc98, powerpc, and sparc64 archs whether
they'd support puc(4) or not.
2003-09-19 20:04:55 +00:00
David E. O'Brien
3fc40c2484 Sort 'bge' correctly. 2003-09-10 18:54:59 +00:00
Bill Paul
b9f78d2b4a Add a device driver for the Broadcom BCM4401 ethernet controller,
written by Stuart Walsh and Duncan Barclay (with some kibbitzing by
me). I'm checking it in on Stuart's behalf.

The BCM4401 is built into several x86 laptop and desktop systems. For the
moment, I have only enabled it in the x86 kernel config because although
it's a PCI device, I haven't heard of any standalone NICs that use it. If
somebody knows of one, we can easily add it to the other arches.

This driver uses register/structure data gleaned from the Linux
driver released by Broadcom, but does not contain any of the code
from the Linux driver itself. It uses busdma.
2003-09-09 18:17:23 +00:00
Scott Long
5fdcb0a62e Re-arrange the raid section a small bit and put drivers into their proper
category.
2003-09-09 06:36:32 +00:00
Bill Paul
a94100fa9b Take the support for the 8139C+/8169/8169S/8110S chips out of the
rl(4) driver and put it in a new re(4) driver. The re(4) driver shares
the if_rlreg.h file with rl(4) but is a separate module. (Ultimately
I may change this. For now, it's convenient.)

rl(4) has been modified so that it will never attach to an 8139C+
chip, leaving it to re(4) instead. Only re(4) has the PCI IDs to
match the 8169/8169S/8110S gigE chips. if_re.c contains the same
basic code that was originally bolted onto if_rl.c, with the
following updates:

- Added support for jumbo frames. Currently, there seems to be
  a limit of approximately 6200 bytes for jumbo frames on transmit.
  (This was determined via experimentation.) The 8169S/8110S chips
  apparently are limited to 7.5K frames on transmit. This may require
  some more work, though the framework to handle jumbo frames on RX
  is in place: the re_rxeof() routine will gather up frames than span
  multiple 2K clusters into a single mbuf list.

- Fixed bug in re_txeof(): if we reap some of the TX buffers,
  but there are still some pending, re-arm the timer before exiting
  re_txeof() so that another timeout interrupt will be generated, just
  in case re_start() doesn't do it for us.

- Handle the 'link state changed' interrupt

- Fix a detach bug. If re(4) is loaded as a module, and you do
  tcpdump -i re0, then you do 'kldunload if_re,' the system will
  panic after a few seconds. This happens because ether_ifdetach()
  ends up calling the BPF detach code, which notices the interface
  is in promiscuous mode and tries to switch promisc mode off while
  detaching the BPF listner. This ultimately results in a call
  to re_ioctl() (due to SIOCSIFFLAGS), which in turn calls re_init()
  to handle the IFF_PROMISC flag change. Unfortunately, calling re_init()
  here turns the chip back on and restarts the 1-second timeout loop
  that drives re_tick(). By the time the timeout fires, if_re.ko
  has been unloaded, which results in a call to invalid code and
  blows up the system.

  To fix this, I cleared the IFF_UP flag before calling ether_ifdetach(),
  which stops the ioctl routine from trying to reset the chip.

- Modified comments in re_rxeof() relating to the difference in
  RX descriptor status bit layout between the 8139C+ and the gigE
  chips. The layout is different because the frame length field
  was expanded from 12 bits to 13, and they got rid of one of the
  status bits to make room.

- Add diagnostic code (re_diag()) to test for the case where a user
  has installed a broken 32-bit 8169 PCI NIC in a 64-bit slot. Some
  NICs have the REQ64# and ACK64# lines connected even though the
  board is 32-bit only (in this case, they should be pulled high).
  This fools the chip into doing 64-bit DMA transfers even though
  there is no 64-bit data path. To detect this, re_diag() puts the
  chip into digital loopback mode and sets the receiver to promiscuous
  mode, then initiates a single 64-byte packet transmission. The
  frame is echoed back to the host, and if the frame contents are
  intact, we know DMA is working correctly, otherwise we complain
  loudly on the console and abort the device attach. (At the moment,
  I don't know of any way to work around the problem other than
  physically modifying the board, so until/unless I can think of a
  software workaround, this will have do to.)

- Created re(4) man page

- Modified rlphy.c to allow re(4) to attach as well as rl(4).

Note that this code works for the sample 8169/Marvell 88E1000 NIC
that I have, but probably won't work for the 8169S/8110S chips.
RealTek has sent me some sample NICs, but they haven't arrived yet.
I will probably need to add an rlgphy driver to handle the on-board
PHY in the 8169S/8110S (it needs special DSP initialization).
2003-09-08 02:11:25 +00:00
Søren Schmidt
9250b177b5 Add device ataraid, this is now seperate and not pulled in by atadisk. 2003-08-24 09:30:13 +00:00
Juli Mallett
d196a10856 Note that scbus is required for SCSI, not just "required" in general.
Submitted by:	Edward Kaplan (tmbg37 on IRC)
Reviewed by:	rwatson (in principle)
2003-06-08 02:03:02 +00:00
David E. O'Brien
4b620ec03d Shorten long comment. 2003-06-01 20:28:20 +00:00
Ruslan Ermilov
517f3f1ae5 There's just no reason to not have these in GENERIC.
Found by:	release/*/drivers.conf cleaning script
Approved by:	re (scottl)
2003-05-18 20:39:15 +00:00
Scott Long
1b20702e45 Add notes about the 'ips' driver. 2003-05-11 06:39:05 +00:00
Hidetoshi Shimokawa
092cd06fcd Add FireWire drivers to GENERIC. 2003-04-21 16:44:05 +00:00
Bill Paul
87b4a25958 Add device driver support for the ASIX Electronics AX88172 USB 2.0
ethernet controller. The driver has been tested with the LinkSys
USB200M adapter. I know for a fact that there are other devices out
there with this chip but don't have all the USB vendor/device IDs.

Note: I'm not sure if this will force the driver to end up in the
install kernel image or not. Special magic needs to be done to exclude
it to keep the boot floppies from bloating again, someone please
advise.
2003-04-20 19:05:33 +00:00
Matthew N. Dodd
50e960d918 - Move driver to newbus.
- Provide identify methods for EtherExpress and 3c507 cards; this
  means these cards no longer need wired configs.
- Provide a detach method.
2003-03-29 13:36:41 +00:00
Paul Saab
90836fcf7d Nuke HTT from here too.
Spotted by:	jhb
2003-03-26 19:55:03 +00:00