Commit Graph

41 Commits

Author SHA1 Message Date
Alexander Motin
8b09b5b170 Fix 32bit bit fields handling. This fixes card serial number fetching.
It was just a cosmetic issue, because that number is only reported in logs.

Reported by:	Michael Butler on current@
2011-01-17 19:31:34 +00:00
Pawel Jakub Dawidek
4daf3d2552 Wait for commands to complete 10 times longer. This makes my A-DATA 32GB SDHC
card being detected.

Reviewed by:	imp
MFC after:	2 weeks
2011-01-04 00:08:39 +00:00
Alexander Motin
b5bc46d8d5 Report relative card address to NewBus as location string. 2010-05-23 09:44:48 +00:00
John Baldwin
a56fe095f0 Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by:	re (kib), attilio
2009-08-20 19:17:53 +00:00
Attilio Rao
444b91868b Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by:    ed, hps, jhb, imp, mav, scottl
No answer by:   ariff, thompsa, yongari
Tested by:      pho,
                G. Trematerra <giovanni dot trematerra at gmail dot com>,
                Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by:   Yahoo! Incorporated
Approved by:	re (ksmith)
2009-08-02 14:28:40 +00:00
Warner Losh
125da88acd read_ivar takes a uintptr_t * not a u_char *. 2009-03-12 06:36:44 +00:00
Warner Losh
711873d44f o Define some symbols for a few items that are bare constants in the
code.
o Use NULL in preference to 0 for a few pointers.
o default to bus timing normal, like we default to bus_width_1.
2009-02-03 04:28:45 +00:00
Alexander Motin
64e4196db9 Add one more debug level. 2009-01-28 23:18:21 +00:00
Alexander Motin
ed01be88f7 Improve mmc driver verbose logging.
Make requests logging controllable by hw.mmc.debug sysctl.
2009-01-28 22:09:00 +00:00
Warner Losh
b63865c6bf Default to normal bus timing mode on SD cards. In practice, most
cards people have today support high speed mode, so the timing field
would be initialized to bus_timing_hs, but there are some slow
cards...
2009-01-21 17:49:23 +00:00
Warner Losh
38d1bc2312 Fix minor style nit for file consistency. 2009-01-21 17:34:14 +00:00
Warner Losh
3cb54b06bc Make the command reporting be under boot verbose.
Also, report a few other things under boot verbose.
Small style nit to make new code look like old code in this file.
2009-01-21 17:28:24 +00:00
Alexander Motin
1e9d4974c1 Fix copy/paste mistake in variable name. This could lead to using incorrect
bus frequency.
2009-01-21 14:22:06 +00:00
Alexander Motin
eb67f31a1b Implement suspend/resume for mmc and mmcsd drivers.
Now it is possible to suspend/resume with inserted and active card.

To reinitialize card on resume and to detect card change while suspended,
implement bus rescan routines. It can also be used by controllers without
card presence detection signals or with multiple cards per slot support.

While there, cleanup msleep() usage. We have no any rights to exit without
"request done" signal from driver as it could lead to modify after free.
2008-12-06 21:41:27 +00:00
Alexander Motin
3a4a255741 Allow card reader bridge driver to report maximum supported transfer size.
sdhci supports up to 65535 blocks transfers, at91_mci - one block.

Enable multiblock operations disabled before to follow at91_mci driver
limitations.

Reviewed by:	imp@
2008-10-29 20:01:26 +00:00
Alexander Motin
3906d42d63 Implement BIO_DELETE command with MMC and SD erase commands.
Erase operation gives card's logic information about unused areas to help it
implement wear-leveling with lower overhead comparing to usual writing.
Erase is much faster then write and does not depends on data bus speed.
Also as result of hitting in-card write logic optimizations I have measured
up to 50% performance boost on writing undersized blocks into preerased areas.

At the same time there are strict limitations on size and allignment of erase
operations. We can erase only blocks aligned to the erase sector size and
with size multiple of it. Different cards has different erase sector size
which usually varies from 64KB to 4MB. SD cards actually allow to erase
smaller blocks, but it is much more expensive as it is implemented via
read-erase-write sequence and so not sutable for the BIO_DELETE purposes.

Reviewed by:	imp@
2008-10-18 16:17:04 +00:00
Warner Losh
b231f5d9b1 style(9): spaces around operators. 2008-10-12 07:30:05 +00:00
Alexander Motin
eecec5bd59 SELECT_CARD command with zero RCA deselects all cards and so has no reply. 2008-10-11 17:30:02 +00:00
Alexander Motin
67d752c3d4 Give mmcsd driver a bit more information about card. It allows to reorganize
log message in a way a bit more common for disk devices. Also it will allow
mmcsd driver to use MMC/SD specific commands when needed.
2008-10-11 13:05:13 +00:00
Alexander Motin
fa5f41d31c Add high capacity MMC cards support. 2008-10-09 20:09:56 +00:00
Warner Losh
4871891e2c o Use seprate routines to decode cid and csd for sd and mmc cards. All they
have in common right now is a memset.  This saves a parameter to
  these routines, as well as a level of indentation.
o Make mmc_get_bits a little clearer...  It really only works on 128-bit
  registers right now.
2008-10-09 19:47:28 +00:00
Alexander Motin
49dd20d149 Only voltage bits should be zero in send_op_cond argument to ignore busy. 2008-10-08 21:10:55 +00:00
Alexander Motin
8d66abb099 Generic SD Host Controller driver going to be named sdhci. 2008-10-08 20:00:51 +00:00
Alexander Motin
07492efe64 Fix bit offset in mmc_sd_switch(). 2008-10-08 18:13:14 +00:00
Alexander Motin
c18f1e2627 Set of mmc layer improvements:
- add MMC support.
 - add SDHC support.
 - add 4 and 8 bit bus width support.
 - add High Speed bus timing support.
2008-10-08 17:35:41 +00:00
Warner Losh
38c51cbe85 Define and use MMC_SECTOR_SIZE.
Make mmc_get_media_size now return an off_t and remove now useless cast.
2008-10-02 07:06:59 +00:00
Warner Losh
051bc8ead2 Make the media size return the block rather than the bytes on the device. 2008-09-29 18:55:45 +00:00
Warner Losh
4e0efe35fa Explicitly set data to NULL rather than relying mmc_wait_for_cmd() to
do it for us.  There may be commands we have to wait for that need to
set data.

Submitted by:	mav@
2008-09-29 18:33:08 +00:00
Warner Losh
dece39ab88 Minor style fixes from mav@ (with similar problems fixed where I noticed
them):
	#define<tab>
	zero memory when we allocate it
	Put device name in error message.

Submitted by:	mav@
2008-09-29 18:17:23 +00:00
Warner Losh
128d0ff2c4 Conform to style(9) for return (foo); The files were a mix before.
Submitted by:	mav@
2008-09-29 18:05:26 +00:00
Warner Losh
6fdacf52be Convert all C++ comments to C style. There's lots of folks that don't
like them and they don't add enough to be worth standing out.
2008-09-29 01:32:21 +00:00
Warner Losh
e9bb9da34d The parameters to the MMCBR_ACQUIRE_HOST and MMCBR_RELEAES_HOST were
the device in question, rather than the bus doing the requesting.  Fix
it so that it is the bus.

Submitted by:	mav@
2008-09-29 01:28:30 +00:00
Warner Losh
5d2f651035 Implement power down, and power down the bus on detach.
Submitted by:	mav@
2008-09-28 23:24:52 +00:00
Warner Losh
40fab6e7c7 Propigate read-only status of cards. Right now it is read only at
device attach time.  We may need to read this more often in the
future, but for now simplicity of implementation wins.

Submitted by:	mav@
2008-09-28 22:40:11 +00:00
Warner Losh
8aaa15e202 The OCR register defines both acceptable voltage bits, as well as bits
for other things.  Mask out the voltage only bits when returning the
Vdd mask for voltage computation.

Submitted by:	mav@
2008-09-28 22:27:29 +00:00
Warner Losh
2703cdbb1b Other busses on the system use the official capitalization for the
technology.  Make mmc conform to that.

Submitted by:	mav@
2008-09-28 22:23:06 +00:00
Warner Losh
752fe3b39e Fix line continuation whitespace.
Submitted by:	mav@
2008-09-28 22:21:53 +00:00
Warner Losh
6634080bee MFp4: When querying the operating condition of SD cards (using the
application specific SEND_OP_COND (CMD55 + ACMD41), go ahead and allow
100 tries.  This gives a timeout of a second rather than the ~100ms
the old style produces.

I've had one old 16MB SD card which needs the extra time.  I've now
had reports from the field that other cards need this too.

Originally done at BSDcan 2007 while waiting to give my embedding
madness minitalk.
2007-06-05 17:04:44 +00:00
Warner Losh
14eced725c A careful reading of the disclaimer that is required to download the
SD Simplified specification, as well as other SD and SDIO
implemenations I've examined, suggest this disclaimer may be required.
It is unclear to me exactly what the license would be for, or why it
might be required.  Err on the side of caution and include this
disclaimer so anybody deploying this code can judge for themselves.  I
have no further unformation about the details.
2007-05-26 05:23:36 +00:00
Warner Losh
0e1466ac89 First cut at making detach work. also add sdh as a possible mmc bridge.
Submitted by: Andrea Bittau
(Andrea may have updated patches, but I've tested these)
2007-05-15 05:49:14 +00:00
Warner Losh
114b4164dd Preliminary MMC stack. This stack supports SD 1.0 cards only, but
should be easily adapted to SD 2.0 (aka SDHC), SDIO, MMC and MMCplus
cards.  At the present time, there's only one bridge driver for the
ARM9 based Atmel AT91RM9200.
2006-10-20 06:39:59 +00:00