It seems strchr() and strrchr() are used more often than index() and
rindex(). Therefore, simply migrate all kernel code to use it.
For the XFS code, remove an empty line to make the code identical to
the code in the Linux kernel.
It was only used by ufs and ext2 and I have really strong doubts that
there are other pieces of code that also use this function. If it turns
out that external drivers use this code as well, I'd be happy to migrate
or revert.
Bump __FreeBSD_version while there.
While there, remove a useless check from the code. memcchr() always
returns characters unequal to 0xff in this case, so inosused[i] ^ 0xff
can never be equal to zero. Also, the fact that memcchr() returns a
pointer instead of the number of bytes until the end, makes conversion
to an offset far more easy.
It seems two of the file system drivers we have in the tree, namely ufs
and ext3, use a function called `skpc()'. The meaning of this function
does not seem to be documented in FreeBSD, but it turns out one needs to
be a VAX programmer to understand what it does.
SPKC is an instruction on the VAX that does the opposite of memchr(). It
searches for the non-equal character. Add a new function called
memcchr() to the tree that has the following advantages over skpc():
- It has a name that makes more sense than skpc(). Just like strcspn()
matches the complement of strspn(), memcchr() is the complement of
memchr().
- It is faster than skpc(). Similar to our strlen() in libc, it compares
entire words, instead of single bytes. It seems that for this routine
this yields a sixfold performance increase on amd64.
- It has a man page.
This shows that the majority of the weird traffic I see here are probe
frames that haven't been sent out, but I can also trigger this condition
by doing ICMP w/ -i 0.3 - enough to trigger the TX during actual scanning,
but not fast enough to stop scanning from occuring.
PR: kern/163689
comparing to struct timeval. for clocktime they should be
1..7 and 1..12 respectively
- CAPK-0100ND uses RTC without centruy bit (DS1307) so set it 21st
are booting inside a VM. There are three reasons to disable this:
o It causes the VM host to believe that all the tested pages or RAM are
in use. This in turn may force the host to page out pages of RAM
belonging to other VMs, or otherwise cause problems with fair resource
sharing on the VM cluster.
o It adds significant time to the boot process (around 1 second/Gig in
testing)
o It is unnecessary - the host should have already verified that the
memory is functional etc.
Note that this simply changes the default when in a VM - it can still be
overridden using the hw.memtest.tests tunable.
MFC after: 4 weeks
When r207410 eliminated the acquisition and release of the page queues
lock from pmap_extract_and_hold(), it didn't take into account that
pmap_pte_quick() sometimes requires the page queues lock to be held.
This change reimplements pmap_extract_and_hold() such that it no
longer uses pmap_pte_quick(), and thus never requires the page queues
lock.
Merge r177525 from the native pmap
Prevent the overflow in the calculation of the next page directory.
The overflow causes the wraparound with consequent corruption of the
(almost) whole address space mapping.
Strictly speaking, r177525 is not required by the Xen pmap because the
hypervisor steals the uppermost region of the normal kernel address
space. I am nonetheless merging it in order to reduce the number of
unnecessary differences between the native and Xen pmap implementations.
Tested by: sbruno
definition from K&R to ANSI, to avoid a clang warning about the uint8_t
parameter being promoted to int, which is not compatible with the type
declared in the earlier prototype.
MFC after: 1 week
All of these are harmless, and are in fact used to shut up warnings from
lint.
While here, remove -Wno-missing-prototypes from the xfs module
Makefile, as I could not reproduce those warnings either with gcc or
clang.
MFC after: 1 week
This is an AR71xx based board with 8MB flash, 64MB RAM, a
Mini-PCI+ slot (see below) and a single 10/100/1000baseT
ethernet port. It also has two USB ports.
This is an easier board than most to add as it doesn't have a
switch PHY on-board. This made it (mostly) trivial to craft a
working configuration.
Things to note:
* This, like most other reference boards, use uboot rather then
redboot. It means that you typically have to manually flash
both the kernel and rootfs partitions.
* Since there's currently no (nice) way to extract out the
ethernet MAC and RAM from the uboot environment, the RAM
will default to 32mb and the MAC will be something very
incorrect. I'll try to fix this up in a subsequent commit
or two, even if it's just some hard-coded nonsense in
ar71xx_machdep.c for now.
* The board is designed for a specific model of mini-PCI+
NIC which never made it into production. Normal mini-PCI
NICs will work fine; if you happen to have the NIC in question
then it will work fine with this board.
aspect of time stamp configuration per interface rather than per BPF
descriptor. Prior to this, the order in which BPF devices were opened and the
per descriptor time stamp configuration settings could cause non-deterministic
and unintended behaviour with respect to time stamping. With the new scheme, a
BPF attached interface's tscfg sysctl entry can be set to "default", "none",
"fast", "normal" or "external". Setting "default" means use the system default
option (set with the net.bpf.tscfg.default sysctl), "none" means do not
generate time stamps for tapped packets, "fast" means generate time stamps for
tapped packets using a hz granularity system clock read, "normal" means
generate time stamps for tapped packets using a full timecounter granularity
system clock read and "external" (currently unimplemented) means use the time
stamp provided with the packet from an underlying source.
- Utilise the recently introduced sysclock_getsnapshot() and
sysclock_snap2bintime() KPIs to ensure the system clock is only read once per
packet, regardless of the number of BPF descriptors and time stamp formats
requested. Use the per BPF attached interface time stamp configuration to
control if sysclock_getsnapshot() is called and whether the system clock read
is fast or normal. The per BPF descriptor time stamp configuration is then
used to control how the system clock snapshot is converted to a bintime by
sysclock_snap2bintime().
- Remove all FAST related BPF descriptor flag variants. Performing a "fast"
read of the system clock is now controlled per BPF attached interface using
the net.bpf.tscfg sysctl tree.
- Update the bpf.4 man page.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
In collaboration with: Julien Ridoux (jridoux at unimelb edu au)
before invoking the kernel.
Quoting submitter:
The issue is with the new boot loader menu. It adds many loader variables
including ones that contain ANSI color escapes.
Obviously, these ANSI codes don't play well with serial consoles when
kenv(1) is executed without arguments (reports vary as to what happens,
but it's never pretty).
The net-effect is that kenv(1) no longer reports menu-related variables.
In essence, kenv(1) output should now appear the same as on RELENG_8
(which lacks the new boot loader and didn't use any such variables).
Thus, restoring serial console glory.
Submitted by: Devin Teske <devin dott teske fisglobal.com>
MFC after: 2 weeks
with clang. There are several macros in these files that return values,
and in some cases nothing is done with them, but it is completely
harmless. For some other files, also disable -Wconstant-conversion,
since that triggers a false positive with the DMA_BIT_MASK() macro.
MFC after: 1 week
configurations for various architectures in FreeBSD 10.x. This allows
basic Capsicum functionality to be used in the default FreeBSD
configuration on non-embedded architectures; process descriptors are not
yet enabled by default.
MFC after: 3 months
Sponsored by: Google, Inc
with clang:
sys/dev/ce/tau32-ddk.c:1228:37: warning: implicit truncation from 'int' to bitfield changes value from 65532 to 8188 [-Wconstant-conversion]
Since this file is obfuscated C, we can never determine (in a sane way,
at least :) if this points to a real problem or not. The driver has
been in the tree for more than five years, so it most likely isn't.
MFC after: 1 week
asychronous task. This avoids tearing down multicast state including
sending IGMP leave messages and reprogramming MAC filters while holding
the per-protocol global pcbinfo lock that is used in the receive path of
packet processing.
Reviewed by: rwatson
MFC after: 1 month
While I'm here update if_oerrors if parent interface of vlan is not
up and running. Previously it updated collision counter and it was
confusing to interprete it.
PR: kern/163478
Reviewed by: glebius, jhb
Tested by: Joe Holden < lists <> rewt dot org dot uk >
decoded ranges. Pass any request for a specific range that fails because
it is not in a decoded range for an ACPI Host-PCI bridge up to the parent
to see if it can still be allocated. This is based on the assumption that
many BIOSes are inconsistent/broken and that settings programmed into BARs
or resources assigned to other built-in components are more trustworthy than
the list of decoded resource ranges in _CRS. This effectively limits the
decoded ranges to only being used for "wildcard" ranges when allocating
fresh resources for a BAR, etc. At some point I would like to only be
this permissive during an early scan of firmware-assigned resources during
boot and to be strict about all later allocations, but that isn't viable
currently.
MFC after: 2 weeks
at SCHED_PRI_RANGE to prevent overflows in the priority value. This can
happen due to irregularities with clock interrupts under certain
virtualization environments.
Tested by: Larry Rosenman ler lerctr org
MFC after: 2 weeks
