illumos/illumos-gate@471a88e499471a88e499https://www.illumos.org/issues/5380
A stream created with zfs send -p -I contains properties of all snapshots of a
given dataset as opposed to only properties of snapshots in a given range.
Not only this is suboptimal but the receive code also does not filter
properties by the range. So, properties of earlier snapshots would be updated
even though the snapshots themselves are not in the stream (just their
properties).
Given that modifying the snapshot properties requires a TXG sync and that the
snapshots are updated one by one the described behavior may lead to a sever
performance penalty.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 3 weeks
illumos/illumos-gate@8b65a70b768b65a70b76https://www.illumos.org/issues/7541
When calling zpool import, zpool does a few ioctls to ZFS.
zpool allocates a buffer in userland and passes it to the kernel so that ZFS
can copy info into it. ZFS will use it to put the nvlist that describes the
pool configuration.
If the allocated buffer is too small, ZFS will return ENOMEM and the call will
have to be redone. This wastes CPU time and slows down the import process. This
happens very often for the ZFS_IOC_POOL_TRYIMPORT call.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@4dd77f9e384dd77f9e38https://www.illumos.org/issues/7545
When evicting from the ARC, we manipulate some refcount_t's, e.g. arcs_size.
When using zdb to examine a large amount of data (e.g. zdb -bb on a large pool
with small blocks), the ARC may have a large number of entries. If reference
tracking is enabled, there will be ~1 reference for each block in the ARC. When
evicting, we decrement the refcount and have to search all the references to
find the one that we are removing, which is very slow.
Since zdb is typically used to find problems with the on-disk format, and not
with the code it is running, we should disable reference tracking in zdb.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
pthread_cond_timedwait() receives absolute time, not relative. Passing
wrong time there caused two threads of zdb to spin in a tight loop.
MFC after: 1 week
7252 7628 compressed zfs send / receive
illumos/illumos-gate@5602294fda5602294fdahttps://www.illumos.org/issues/7252
This feature includes code to allow a system with compressed ARC enabled to
send data in its compressed form straight out of the ARC, and receive data in
its compressed form directly into the ARC.
https://www.illumos.org/issues/7628
We should have longer, more readable versions of the ZFS send / recv options.
7628 create long versions of ZFS send / receive options
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
7386 zfs get does not work properly with bookmarks
illumos/illumos-gate@edb901aab9edb901aab9https://www.illumos.org/issues/7386
The zfs get command does not work with the bookmark parameter while it works
properly with both filesystem and snapshot:
# zfs get -t all -r creation rpool/test
NAME PROPERTY VALUE SOURCE
rpool/test creation Fri Sep 16 15:00 2016 -
rpool/test@snap creation Fri Sep 16 15:00 2016 -
rpool/test#bkmark creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test@snap
NAME PROPERTY VALUE SOURCE
rpool/test@snap creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test#bkmark
cannot open 'rpool/test#bkmark': invalid dataset name
#
The zfs get command should be modified to work properly with bookmarks too.
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
8046 Let calloc() do the multiplication in libzfs_fru_refresh
5697e03e6ehttps://www.illumos.org/issues/8046
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pedro Giffuni <pfg@freebsd.org>
MFC after: 3 days
illumos/illumos-gate@8363e80ae7https://github.com/illumos/illumos-gate/commit/8363e80ae72609660f6090766ca8c2c18https://www.illumos.org/issues/7303
This change introduces a new weighting algorithm to improve metaslab selection.
The new weighting algorithm relies on the SPACEMAP_HISTOGRAM feature. As a result,
the metaslab weight now encodes the type of weighting algorithm used
(size-based vs segment-based).
This also introduce a new allocation tracing facility and two new dcmds to help
debug allocation problems. Each zio now contains a zio_alloc_list_t structure
that is populated as the zio goes through the allocations stage. Here's an
example of how to use the tracing facility:
> c5ec000::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 ENOSPC ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 ENOSPC ztest.0a
1 0 400 1 x 8M 17b1a00 ztest.0a
> 1ff2400::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 200 0 NOT_ALLOCATABLE mirror-2
- 0 200 0 NOT_ALLOCATABLE mirror-0
1 0 200 1 x 4M 112ae00 mirror-1
- 1 200 0 NOT_ALLOCATABLE mirror-2
- 1 200 0 NOT_ALLOCATABLE mirror-0
1 1 200 1 x 4M 112b000 mirror-1
- 2 200 0 NOT_ALLOCATABLE mirror-2
If the metaslab is using segment-based weighting then the WEIGHT column will
display the number of segments available in the bucket where the allocation
attempt was made.
Author: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This simplifies make logic/output
While here, remove bogus CFLAGS which look for headers in cddl/lib/libumem.
There aren't any source files there (just Makefiles)
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Aliases are normally given names that include a key that's unique for each
input object file. This, for example, ensures that aliases for identically
named local symbols in different object files don't conflict. However, in
some cases the static linker will leave an undefined alias after merging
identical weak symbols, resulting in a link error. A non-unique name allows
the aliases to be merged as well.
PR: 216871
X-MFC With: r313262
libdtrace needs to append to the input object files' string and symbol
tables. Currently it does so by allocating a larger buffer, copying the
existing sections into them, and swapping pointers in the libelf data
descriptors. However, it also frees those buffers when its processing is
complete, which leads to a double free since the elftoolchain libelf
owns them and also frees them in elf_end(3). Instead, free the buffers
originally allocated by libelf.
MFC after: 2 weeks
When recording probe site addresses in the output DOF file, dtrace -G
needs to emit relocations for the .SUNW_dof section in order to obtain
the addresses of functions containing probe sites. DTrace expects the
addresses to be relative to the base address of the final ELF file,
and the amd64 USDT implementation was relying on some unspecified and
incorrect behaviour in the base system GNU ld to achieve this.
This change reimplements the probe site relocation handling to allow
USDT to be used with lld and newer GNU binutils. Specifically, it
makes use of R_X86_64_PC64/R_386_PC32 relocations to obtain the
probe site address relative to the DOF file address, and adds and uses a
new DOF relocation type which computes the final probe site address using
these relative offsets.
Reported by and discussed with: Rafael Espíndola
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9374
It's pretty unlikely to actually hit this, but good to check it anyway
Reported by: Coverity
CID: 1362018
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Also save only high bits in the ipv4_flags, because it is defined
as uint8_t. So now it will show DF and MF flags as 0x40 and 0x20.
Reviewed by: markj@
MFC after: 1 week
dtrace converts pairs of consecutive underscores in a probe name to dashes.
When dtrace -G processes relocations corresponding to USDT probe sites, it
performs this conversion on the corresponding symbol names prior to looking
up the resulting probe names in the USDT provider definition. However, in
so doing it would actually modify the input object's string table, which
breaks the string suffix merging done by recent binutils. Because we don't
care about the symbol name once the probe site is recorded, just perform the
probe lookup using a temporary copy.
Reported by: hrs, swills
MFC after: 3 weeks
Enumeration of return probes involves disassembling subroutines in the
target process, and ptrace(2) is currently used to read from the target
process. libproc could read from the backing file instead to avoid this
problem, but in the common case libdtrace will have a writeable handle
on the process anyway. In particular, a writeable handle is needed to list
USDT probes, and libdtrace will cache such a handle for processes that it
controls via dtrace -c and -p.
This change adds some handling for the equivalent of Solaris' PGRAB_*
flags. In particular, support for PGRAB_RDONLY is needed to avoid a
nasty deadlock: dtrace(1) may otherwise stop the master process for its
pseudo-terminal and end up blocking while writing to standard output.
When looking up an object by name, allow prefix matches if no direct match
is found. This allows one to, for example, match libc entry probes with:
# dtrace -n 'pid$target:libc.so::entry' -c ./foo
instead of requiring "libc.so.7" or a glob.
Also remove proc_obj2map() as it currently just duplicates the
functionality of proc_name2map(). It's supposed to take a Solaris
link-map ID as a paramter, but support for this isn't implemented and
isn't required to support DTrace's pid provider.
Fix a segfault in ctfmerge(1) due to a bug in GCC.
The change was correct and the bug real, but upstream didn't adopt it
and we want to remain in sync. When/if upstream does something about it
we can bring their version.
The bug in question was fixed in GCC 4.9 which is now the default in
FreeBSD's ports. Our native gcc-4.2, which is still in use in some Tier-2
platforms also has a workaround so no end-user should be harmed by the
revert.
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.
Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG. Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.
Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size. In some
cases efficiency stopped to almost as low as 50%. In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas. This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently. Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.
While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.
Sponsored by: iXsystems, Inc.
These are FreeBSD-specific and were added in r178576 to provide the ability
to pretty-print instances of compound types. However, the print action has
long since been augmented to provide this functionality with a simpler
interface.
Discussed with: gnn
Differential Revision: https://reviews.freebsd.org/D8478
illumos/illumos-gate@620f322510620f322510https://www.illumos.org/issues/6051
Currently lzc_receive() requires that its snapname argument is a snapshot name
(contains '@').
zfs receive allows to specify just a dataset name and would try to deduce the
snapshot name from the stream.
I propose to allow lzc_receive() to do the same.
That seems to be quite easy to implement, it requires only a small amount of
logic, it does not require any additional system calls or any additional data
from the stream.
The benefit is that the new behavior would allow to keep the snapshot names the
same between the sender and receiver at zero cost, without a need to pass the
names out of band.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@icyb.net.ua>
MFC after: 2 weeks
(gpt)zfsboot will read one-time boot directives from a special ZFS pool
area. The area was previously described as "Boot Block Header", but
currently it is know as Pad2, marked as reserved and is zeroed out on
pool creation. The new code interprets data in this area, if any, using
the same format as boot.config. The area is immediately wiped out.
Failure to parse the directives results in a reboot right after the
cleanup. Otherwise the boot sequence proceeds as usual.
zfsbootcfg writes zfsboot arguments specified on its command line to the
Pad2 area of a disk identified by vfs.zfs.boot.primary_pool and
vfs.zfs.boot.primary_vdev kenv variables that are set by loader during
boot. Please see the manual page for more.
Thanks to all who reviewed, contributed and made suggestions! There are
many potential improvements to the feature, please see the review for
details.
Reviewed by: wblock (docs)
Discussed with: jhb, tsoome
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7612
The untyped probe arguments have a width larger than int on such platforms,
so printing their value without a cast can give unexpected results.
MFC after: 1 week
illumos/illumos-gate@f9eb9fdf19https://github.com/illumos/illumos-gate/commit/f9eb9fdf196b6ed476e4ffc69cecd8b0d
a3cb7e7
https://www.illumos.org/issues/6451
Sometimes ztest fails because zdb detects checksum errors. e.g.:
Traversing all blocks to verify checksums and verify nothing leaked ...
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 8000160> DVA0=<0:1cc2000:
180000> [L0 other uint64[]] sha256 uncompressed LE contiguou
s unique single size=100000L/100000P birth=271L/271P fill=1
cksum=c5a3e27d1ed0f894:843bca3a5473c4bf:f76a19b6830a2e4:91292591613a12bf --
skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 800000180> DVA0=<0:ce16800:
180000> [L0 other uint64[]] sha256 uncompressed LE contigu
ous unique single size=100000L/100000P birth=840L/840P fill=1
cksum=5d018f3d061e17f3:6d1584784587bf63:2805a74a0ce37369:ba68a214806c7e75
-- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 1000000360> DVA0=<0:10d37400:
180000> [L0 other uint64[]] sha256 uncompressed LE conti
guous unique single size=100000L/100000P birth=904L/904P fill=1
cksum=fa1e11d4138bd14b:86c9488c444473e3:f31e43c72e72e46b:e3446472d1174d
ba -- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 400000002c0> DVA0=<0:127ef400:
180000> [L0 other uint64[]] sha256 uncompressed LE cont
iguous dedup single size=100000L/100000P birth=549L/549P fill=1
cksum=30e14955ebf13522:66dc2ff8067e6810:4607e750abb9d3b3:6582b8af909fcb
58 -- skipping
zdb_blkptr_cb: Got error 50 reading <657, 5, 0, 1c0> DVA0=<0:1a180400:180000>
[L0 other uint64[]] fletcher4 uncompressed LE contiguou
s unique single size=100000L/100000P birth=1091L/1091P fill=1 cksum=a6cf1e50:
29b3bd01c57e5:36779b914035db9a:db61cdcf6bec56f0 -- skippin
g
The problem is that ztest_fault_inject() can inject multiple faults into the
same block. It is designed such that it can inject errors on all leafs of a
RAID-Z or mirror, but for a given range of offsets, it will only inject errors
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
