* arge0 doesn't (yet) work via the switch PHY ports; I'm not sure why.
* arge1 maps to the WAN port. That works.
TODO:
* The PLL register needs a different (non-default) value for Gigabit
Ethernet. The board setup code needs to be extended a bit to allow
for non-default pll_1000 values - right now, those values come out
of hard-coded values in the per-chip set_pll_ge() routines.
Obtained from: Linux / OpenWRT
This may result in a bit of a throughput drop. However, any throughput
drop at this point should be investigated and root caused, as it's likely
because TX scheduling (all the way down to how preemption, scheduler work,
etc) is happening in a sub-optimal fashion.
This also makes it much more likely to be reloadable on a live machine.
Allocating 5120 TX ath_buf entries via contigmalloc is very unlikely
after a few hours of using X/Chromium.
dirty and murky past.
* Override the default cache line size to be something reasonable if
it's set to 0. Some NICs initialise with '0' (eg embedded ones)
and there are comments in the driver stating that various OSes (eg
older Linux ones) would incorrectly program things and 0 out this
register.
* Just default to overriding the latency timer. Every other driver
does this.
* Use a default cache line size of 32 bytes. It should be "reasonable
enough".
Obtained from: Linux ath9k, Atheros
a8af6270bd96be6ccd86f70b60fa6512b710e4f0
virtio_blk: Include function name in panic string
cbdb03a694b76c5253d7ae3a59b9995b9afbb67a
virtio_balloon: Do the notify outside of the lock
By the time we return from virtqueue_notify(), the descriptor
will be in the used ring so we shouldn't have to sleep.
10ba392e60692529a5cbc1e9987e4064e0128447
virtio: Use DEVMETHOD_END
80cbcc4d6552cac758be67f0c99c36f23ce62110
virtqueue: Add support for VIRTIO_F_RING_EVENT_IDX
This can be used to reduce the number of guest/host and
host/guest interrupts by delaying the interrupt until a
certain index value is reached.
Actual use by the network driver will come along later.
8fc465969acc0c58477153e4c3530390db436c02
virtqueue: Simplify virtqueue_nused()
Since the values just wrap naturally at UINT16_MAX, we
can just subtract the two values directly, rather than
doing 2's complement math.
a8aa22f25959e2767d006cd621b69050e7ffb0ae
virtio_blk: Remove debugging crud from 75dd732a
There seems to be an issue with Qemu (or FreeBSD VirtIO) that sets
the PCI register space for the device config to bogus values. This
only seems to happen after unloading and reloading the module.
d404800661cb2a9769c033f8a50b2133934501aa
virtio_blk: Use better variable name
75dd732a97743d96e7c63f7ced3c2169696dadd3
virtio_blk: Partially revert 92ba40e65
Just use the virtqueue to determine if any requests are
still inflight.
06661ed66b7a9efaea240f99f414c368f1bbcdc7
virtio_blk: error if allowed too few segments
Should never happen unless the host provides use with a
bogus seg_max value.
4b33e5085bc87a818433d7e664a0a2c8f56a1a89
virtio_blk: Sort function declarations
426b9f5cac892c9c64cc7631966461514f7e08c6
virtio_blk: Cleanup whitespace
617c23e12c61e3c2233d942db713c6b8ff0bd112
virtio_blk: Call disk_err() on error'd completed requests
081a5712d4b2e0abf273be4d26affcf3870263a9
virtio_blk: ASSERT the ready and inflight request queues are empty
a9be2631a4f770a84145c18ee03a3f103bed4ca8
virtio_blk: Simplify check for too many segments
At the cost of a small style violation.
e00ec09da014f2e60cc75542d0ab78898672d521
virtio_blk: Add beginnings of suspend/resume
Still not sure if we need to virtio_stop()/virtio_reinit()
the device before/after a suspend.
Don't start additional IO when marked as suspending.
47c71dc6ce8c238aa59ce8afd4bda5aa294bc884
virtio_blk: Panic when dealt an unhandled BIO cmd
1055544f90fb8c0cc6a2395f5b6104039606aafe
virtio_blk: Add VQ enqueue/dequeue wrappers
Wrapper functions managed the added/removing to the in-flight
list of requests.
Normally biodone() any completed IO when draining the virtqueue.
92ba40e65b3bb5e4acb9300ece711f1ea8f3f7f4
virtio_blk: Add in-flight list of requests
74f6d260e075443544522c0833dc2712dd93f49b
virtio_blk: Rename VTBLK_FLAG_DETACHING to VTBLK_FLAG_DETACH
7aa549050f6fc6551c09c6362ed6b2a0728956ef
virtio_blk: Finish all BIOs through vtblk_finish_bio()
Also properly set bio_resid in the case of errors. Most geom_disk
providers seem to do the same.
9eef6d0e6f7e5dd362f71ba097f2e2e4c3744882
Added function to translate VirtIO status to error code
ef06adc337f31e1129d6d5f26de6d8d1be27bcd2
Reset dumping flag when given unexpected parameters
393b3e390c644193a2e392220dcc6a6c50b212d9
Added missing VTBLK_LOCK() in dump handler
Obtained from: Bryan Venteicher bryanv at daemoninthecloset dot org
r233961:
Fix interrupt load balancing regression, introduced in revision
222813, that left all un-pinned interrupts assigned to CPU 0.
In intr_shuffle_irqs(), remove CPU_SETOF() call that initialized
the "intr_cpus" cpuset to only contain CPU0.
This initialization is too late and nullifies the results of calls
to the intr_add_cpu() that occur much earlier in the boot process.
r234074 (partial):
The BSP is not added to the mask of valid target CPUs for interrupts.
Fix this by adding the BSP as an interrupt target directly in
r234105:
Fix !SMP build after r234074.
MFC after: 3 days
Contrarily to what i wrote in my previous commit, the 82599
does include the CRC in the length. The operating mode is
reset in ixgbe_init_locked() and so we need to hook into
the places where the two registers (HLREG0 and RDRXCTL) are
modified.
This uses the new firmware(9) method for squirreling away the EEPROM
contents from SPI flash so ath(4) can get to them later.
It won't work out of the box just yet - you have to add this to
if_ath_pci.c:
#define ATH_EEPROM_FIRMWARE
.. until I've added it as a configuration option and updated things.
interface.
* Introduce a device hint, 'eeprom_firmware', which is the name of firmware
to lookup.
* If the lookup succeeds, take a copy of it and use it as the eeprom data.
This isn't enabled by default - you have to define ATH_EEPROM_FIRMWARE.
I'll add it to the configuration variables in a later commit.
TODO:
* just keep a firmware reference in ath_softc, and remove the need to
waste the extra memory in having sc_eepromdata be a malloc()ed block.
future use by the ath(4) driver.
These embedded devices put the calibration/PCI bootstrap data on the
on board SPI flash rather than on an EEPROM connected to the NIC.
For some boards, there's two NICs and two sets of EEPROM data in the
main SPI flash.
The particulars:
* Introduce ath_fixup_size, which is the size of the EEPROM area in
bytes.
* Create a firmware image with a name based on the PCI device identifier
(bus/slot/device/function).
* Hide some verbose debugging behind 'bootverbose'.
ath(4) can then use this to load in the EEPROM data.
This requires AR71XX_ATH_EEPROM to be defined.
* the openwrt code doesn't treat 0/0/0 any differently
from other bus/slot/func combinations.
* A "local write" function writes to the LCONF area, and
so I've added it.
* The PCI workaround at attach time uses this LCONF code,
which it already did ..
* .. but it is a 4 byte write, not a 2 byte write.
Even though it's PCIR_COMMAND which is a two byte PCI register.
Tested on: AR7161
TODO: The other two AR71xx derivatives
TODO: More thoroughly stare at the datasheets I do have
and if it indeed is incorrect, push fixes to both
FreeBSD and Linux/OpenWRT.
Obtained from: Linux OpenWRT
Return EPERM from ext2_setattr() when an user without PRIV_VFS_SYSFLAGS
privilege attempts to toggle SF_SETTABLE flags.
Flags are now stored to ip->i_flags in one place after all checks.
Also, remove SF_NOUNLINK from the checks because ext2fs doesn't support
that flag.
Reviewed by: bde
It is implemented via db_trace_thread() for DDB and not implemented
for GDB. This should have been part of r234190.
Pointy hat to: jhb
Reported by: jkim
MFC after: 1 week
used in polled-mode. The callout invokes uart_intr, which rearms the timeout.
Implemented for bhyve, but generically useful for e.g. embedded bringup
when the interrupt controller hasn't been setup, or if it's not deemed
worthy to wire an interrupt line from a serial port.
Submitted by: neel
Reviewed by: marcel
Obtained from: NetApp
MFC after: 3 weeks
backtrace for an arbitrary thread (rather than the calling thread).
A kdb_backtrace_thread() wrapper function uses the configured debugger
if possible, otherwise it falls back to using stack(9) if that is
available.
- Replace a direct call to db_trace_thread() in propagate_priority()
with a call to kdb_backtrace_thread() instead.
MFC after: 1 week
fail to load (the MOD_LOAD event fails) during a kldload(2), unload the
linker file and fail the kldload(2) with ENOEXEC.
Reported by: gcooper
MFC after: 1 week
does not include the CRC irrespective of the setting
of CRCSTRIP. The 82599 data sheets (sec. 7.1.6) say differently.
Very strange. Need to check what happens on legacy descriptors,
but for the time being this restores functionality.
- Mark 'sdp' as requiring 'inet'.
- Always include "opt_inet.h" and "opt_inet6.h" and modify the IB
driver Makefiles to honor WITH/WITHOUT_INET/INET6/_SUPPORT options
to determine what should be enabled during a module build.
- Fix the mlxen(4) driver and the core IB code to compile without
if INET is disabled (including when both INET and INET6 are disabled).
Reviewed by: bz
MFC after: 2 weeks
in IFQ_HANDOFF() when the packet is passed to the start routine, so doing
it here resulted in double counting.
Reported by: Alex Tutubalin lexa lexa ru
MFC after: 1 week
table aren't valid. If they are ok, use hdr_lba_alt value to read backup
header. This will make gptboot happy when GPT used atop of some GEOM
provider, e.g. GEOM_MIRROR.
Reviewed by: pjd
MFC after: 2 weeks
and make it easier to replace it with a different implementation.
On passing, also fix indentation.
NOTE: I know that #include "foo.c" is ugly, but the alternative
(add another entry to sys/conf/files, add a separate header with
structs and prototypes, and expose functions that are meant to
be private) looks even worse to me.
We need a more modular way to specify dependencies and build options.
in td_errno. Flag is supposed to be used by syscalls returning
EJUSTRETURN because errno was already placed into the usermode frame
by a call to set_syscall_retval(9). Both ktrace and dtrace get errno
value from td_errno if the flag is set.
Use the flag to fix sigsuspend(2) error return ktrace records.
Requested by: bde
MFC after: 1 week
are discarded, this is an issue because lacp drops the lock which may allow
network threads to access freed memory. Expand the lock coverage so the
detach/attach happen atomically.
Submitted by: Andrew Boyer (earlier version)
static and declare its prototype in sys/vnode.h) so that it can be
called from process_deferred_inactive() (in ufs/ffs/ffs_snapshot.c)
instead of the body of vinactive() being cut and pasted into
process_deferred_inactive().
Reviewed by: kib
MFC after: 2 weeks
for whether the page is physical. On dense phys mem systems (32-bit),
VM_PHYS_TO_PAGE will not return NULL for device memory pages if device
memory is above physical memory even if there is no allocated vm_page.
Attempting to use the returned page could then cause either memory
corruption or a page fault.
portions were already reapplied in r233708:
- Use a dedicated task to handle deferred transmits from the if_transmit
method instead of reusing the existing per-queue interrupt task.
Reusing the per-queue interrupt task could result in both an interrupt
thread and the taskqueue thread trying to handle received packets on a
single queue resulting in out-of-order packet processing.
- Call ether_ifdetach() earlier in igb_detach().
- Drain tasks and free taskqueues during igb_detach().
MFC after: 1 week
being attached. This is implemented by adding a new DS_ATTACHING state
while a device's DEVICE_ATTACH() method is being invoked. A driver is
required to not fail an attach of a busy device. The device's state will
be promoted to DS_BUSY rather than DS_ACTIVE() if the device was marked
busy during DEVICE_ATTACH().
Reviewed by: kib
MFC after: 1 week
- add a sysctl, dev.netmap.ix_crcstrip, to control whether ixgbe should
strip the CRC on received frames. Defaults to 0, which keeps the CRC.
and improves performance when receiving min-sized (64-byte) frames.
This matters because min-sized frames is one of the standard
benchmarks for switches and routers, some chipsets seem to issue
read-modify-write cycles for PCIe transactions that are not a
full cache line, and a min-sized frame triggers the bug, resulting
in reduced throughput -- 9.7 instead of 14.88 Mpps -- and heavy
bus load.
- for the time being, always look for incoming packets on a select/poll
even if there has not been an interrupt in the meantime. This is
only a temporary workaround for a probable race condition in keeping
track of rx interrupts.
Add a couple of diagnostic vars to help studying the problem.
values as in the Intel driver 3.8.21 for linux. The fact that it
is standard in the above driver suggests that it has no bad side
effects.
But of course there must be a reason for enabling features, not
just "it does not harm", so here it is a good one:
Prefetching enables full line rate even using a single queue (14.88
Mpps, compared to ~12 Mpps without prefetch). This in turn is
terribly useful when one wants to schedule traffic.
For obvious reasons the difference is only visible with netmap
or other high speed solutions, but presumably the advantage
should be in the order of a fraction of a microsecond when
starting transmission on an empty queue.
Discussed with Jack Vogel.
MFC after: 1 week
outside the range of valid file descriptors
PR: kern/164970
Submitted by: Peter Jeremy <peterjeremy@acm.org>
Reviewed by: jilles
Approved by: cperciva
MFC after: 1 week
we look at count of addresses on a particular vhid, we
should account number of addresses on cif.
To achieve this we need to run carp_attach() and
carp_detach() under appropriate cif lock.
r228476 fixed superfluous link UP/DOWN messages but broke IPMI
access during boot. It's not clear why r228476 breaks IPMI and
should be revisited.
Reported by: Paul Guyot <paulguyot <> ieee dot org >
MFC after: 1 week
identical now that the bus spaces are unified under sys/x86.
Replace them with a single uart_cpu_x86.c.
o delete uart_cpu_i386.c
o move uart_cpu_amd64.c to uart_cpu_x86.c
o update files.amd64 and files.i386 accordingly.
usermode context switches (long jumps and ucontext operations). If these
are used across threads, multiple threads can end up with the same TLS base.
Madness will then result.
This makes behavior on PPC match that on x86 systems and on Linux.
MFC after: 10 days
problem where userspace apps such as smartctl fail due to CAM_REQUEUE_REQ
status getting returned when tagged commands are outstanding when smartctl
sends its I/O using the pass(4) interface.
Sponsored by: Intel
Found and tested by: Ravi Pokala <rpokala at panasas dot com>
Reviewed by: scottl
Approved by: scottl
MFC after: 1 week
- Use more natural ip->i_flags instead of vap->va_flags in the final
flags check.
- Style improvements.
No functional change intended.
MFC after: 2 weeks
privilege attempts to toggle SF_SETTABLE flags.
- Use the '^' operator in the SF_SNAPSHOT anti-toggling check.
Flags are now stored to ip->i_flags in one place after all checks.
Submitted by: bde
add a FreeBSD_version check. It should work fine for compiling
on -HEAD, 9.x and 8.x.
* Conditionally compile the 11n options only when 11n is enabled.
The above changes allow the ath(4) driver to compile and run on
8.1-RELEASE (Hi old PC-BSD!) but with the 11n stuff disabled.
I've done a test against the net80211 and tools in 8.1-RELEASE.
The NIC used in testing is the AR2427 in an EEEPC.
Just to be clear - this change is to allow the -HEAD ath/hal/rate
code to run on 9.x _and_ 8.x with no source changes. However,
when running on earlier kernels, it should only be used for legacy
mode. (Don't define ATH_ENABLE_11N.)
this commit is not enough to enable CARP operation on
if_bridge(4), because the latter doesn't handle or even
initialize its ifp->if_link_state.
Reported by: Alexander Lunev <sol289 gmail.com>
in set_apic_interrupt_ids(). Besides, set_apic_interrupts_ids() is not
called in the !SMP case too.
Fix this by:
- Adding the BSP as an interrupt target directly in cpu_startup().
- Remove an obsolete optimization where the BSP are skipped in
set_apic_interrupt_ids().
Reported by: jh
Reviewed by: jhb
MFC after: 3 days
X-MFC: r233961
Pointy hat to: me
The SA_PROC signal property indicated whether each signal number is directed
at a specific thread or at the process in general. However, that depends on
how the signal was generated and not on the signal number. SA_PROC was not
used.
accesses of the cache member of vm_object objects.
- Use novel vm_page_is_cached() for checks outside of the vm subsystem.
Reviewed by: alc
MFC after: 2 weeks
X-MFC: r234039
They do not have compatible configuration registers in PCI configuration
space. Instead their configuration resides in AMD "PM I/O" space
(accessed via a pair of I/O space registers).
MFC after: 5 days
that it will be freed to the cache pool rather than the default pool.
Otherwise, the cached pages within the reservation may be recycled sooner
than necessary.
Reported by: Andrey Zonov
