Commit Graph

216 Commits

Author SHA1 Message Date
Olivier Houchard
0a65bc0775 Fix ed compilation with PAE by using %jx instead of %x. 2003-04-05 18:12:36 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Jens Schweikhardt
9d5abbddbf Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Brooks Davis
38d8969122 Use if_printf() instead of printf() to print "ed#: blah". 2002-10-01 00:49:28 +00:00
Warner Losh
0d9ad27e7e mbuf leak in the error case has been fixed. When we have
an error, go ahead and m_freem the buffer.

PR: 32666
Submitted by: Chi-Fung Fan
2002-09-30 00:18:12 +00:00
Poul-Henning Kamp
37c841831f Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by:    FlexeLint warning #512
2002-09-28 17:15:38 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Warner Losh
5c8fcbc866 Patch to allow the ed driver interrupt routine to terminate if the
card is ejected while we're in this routine.

yamamoto-san's original patch had a small race window for AX88190
chips, which I corrected by limiting the number of iterations we'd try
to reset the bits to be about 15ms rather than forever.  This seems to
work for me, but I don't have a large collections of cards based on
this chipset.

Submitted by:	YAMAMOTO Shigeru
2001-11-24 16:15:18 +00:00
Luigi Rizzo
7b109fa404 MFS: sync the ipfw/dummynet/bridge code with the one recently merged
into stable (mostly , but not only, formatting and comments changes).
2001-11-04 22:56:25 +00:00
Luigi Rizzo
5c514284de Always compile in bridge hooks, or this code will not work (efficiently) with
the loadable bridge module.
2001-11-01 17:10:52 +00:00
Jeroen Ruigrok van der Werven
2a01978a07 Fix obvious bug where return from probe was botched.
People with HP PCLAN+ NICs can now happily use the card again

PR:		21087
Submitted by:	M. B. Buchanan <buchanan@orbitworld.net>
2001-10-31 19:43:33 +00:00
Luigi Rizzo
06bd2f9c81 Make this compile again after the changes to make bridge kld'able 2001-10-07 00:18:48 +00:00
Ian Dowse
9b04180c2c Add an option ED_NO_MIIBUS, which causes the `ed' driver to be
built without support for miibus PHYs. Most ed cards don't need
miibus support, so it's useful to be able to avoid the bloat of
all the mii devices for small fixed-purpose kernels.
2001-09-29 22:32:03 +00:00
Ian Dowse
071dbcd2cc Add a few missing spl calls in preparation for an MFC of the miibus
support.
2001-07-22 21:39:54 +00:00
Warner Losh
f2fdbb57ca Add support for Dlink DL10022 to the ed driver. This is a mii part
bolted to a ne-2000 chip.  This is necessary for the NetGear FA-410TX
and other cards.

This also requires you add mii to your kernel if you have an ed driver
configured.

This code will result in a couple of timeout messages for ed on the
impacted cards.  Additional work will be needed, but this does work
right now, and many people need these cards.

Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
2001-03-03 08:31:37 +00:00
Luigi Rizzo
b8987738cf Whoops... forgotten a few pieces in previous patch:
* a ">" is really ">=" ;
 * do not try to fetch zero-sized blocks from the card;
 * make sure that bpf gets the packets it wants even with
   bridging active;
2001-02-08 22:54:57 +00:00
Luigi Rizzo
338cdb139b Make sure that we do not accept packets shorter than a full ethernet
header, or we would have a negative length passed to ether_input().
2001-02-08 22:21:30 +00:00
Poul-Henning Kamp
6817526d14 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
Jeroen Ruigrok van der Werven
f09deb6962 Fix typo: wierd -> weird.
There is no such thing as wierd in the english language.
2001-02-06 09:25:10 +00:00
Poul-Henning Kamp
37d4006626 Another round of the <sys/queue.h> FOREACH transmogriffer.
Created with:   sed(1)
Reviewed by:    md5(1)
2001-02-04 16:08:18 +00:00
Poul-Henning Kamp
fc2ffbe604 Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
Warner Losh
cc9e9343cd Minor newbus/style(9) cleanups.
o Move the ax88190 code to its own function.
o Move all device_method_t, driver_t and DRIVER_MODULE definitions to the
  end of files.
o Wrap a few lines > 80 characters.
o Use the same devclass for all ed drivers.  This allows machines with
  multiple types of cards to have their cards numbered correctly.  Before,
  you could wind up with two ed0's.
o Protect if_edvar.h from multiple includes because I was there.
2000-12-26 06:38:04 +00:00
Toshihiko ARAI
d556784aa3 Linksys Fast Ethernet PCCARD cards supported by the ed driver now
require the addition of flag 0x80000 to their config line in
pccard.conf(5).  This flag is not optional.  These Linksys cards will
not be recognized without it.

Reviewed by:    imp, iwasaki
2000-12-18 15:28:53 +00:00
Warner Losh
727928f866 Remove unnecessary includes found by phk's script. I've been building
these locally for ages.
2000-12-13 06:28:37 +00:00
Peter Wemm
b3d39a56ae Update the ed driver to probe and attach under a NEWCARD kernel (I was
using a cardbus based system with pccbb providing the pcic interface).
Something isn't quite right.. when the driver allocates and activates
its resources, the IO space that was requested reads as all zeros (versus
the original 0xff's as it normally is when there is no device responding).

Also, deactivate the resources before releasing them.  OLDCARD doesn't
seem to care but NEWCARD/CARDBUS get rather unhappy if you release
a resource that hasn't been deactivated yet.

Make pcic_p.c only compile with oldcard kernels.
2000-11-25 03:36:09 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Paul Saab
6004db96ae Move the detection of Linksys PCMCIA cards from attach to probe.
This should solve the problems people were seeing with this driver.

Reported by:	phk & others.
2000-09-12 11:03:12 +00:00
Yoshihiro Takahashi
82583dd564 - Fixed the conversion to bus_space interface.
- Added PC-98 Cbus devices support.
  The original patch is submitted by chi@bd.mbn.or.jp (Chiharu Shibata)
- Removed old ed driver.
2000-08-17 12:15:45 +00:00
Seigo Tanimura
8f4fec9c36 Newbusify ed driver.
Partly submitted by:	alex
2000-08-14 04:31:07 +00:00
Seigo Tanimura
eecdc4415b MFPAO: Add support for AX88190, equipped in MELCO LPC3-TX. 2000-07-23 15:15:43 +00:00
Poul-Henning Kamp
f8fc6141fb Fix the IRQ9/IRQ2 confusion.
Submitted by:	Alan Clegg <abc@bsdi.com>
2000-07-18 18:50:24 +00:00
Archie Cobbs
21b8ebd926 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
Paul Saab
898e18b849 Only try to detect Linksys PCMCIA cards when we are in a pccard
environment.  This fixes the breakage to ISA ethernet cards.

Reviewed by:	peter
2000-06-29 07:31:37 +00:00
Paul Saab
9e672f19b5 Allow newer Linksys 10/100 PCMCIA cards to work.
Reviewed by:	imp
2000-06-18 05:50:16 +00:00
Poul-Henning Kamp
855e8bb9ad ed_ioctl() can be called from ifpromisc() after the card has been removed,
don't panic on a NULL pointer in that case.
2000-06-01 21:55:49 +00:00
Archie Cobbs
2e2de7f23f Move code to handle BPF and bridging for incoming Ethernet packets out
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.

The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.

The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.

Reviewed by:	freebsd-net
2000-05-14 02:18:43 +00:00
Poul-Henning Kamp
eb95c536ad Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Warner Losh
5431b20654 Bogusly returned zero always. Return 1 if we pass the checksum. 2000-03-20 23:29:27 +00:00
Warner Losh
7d0548ce1c Noriyoshi Kawano-san reported in nomads another OUI for linksys. 4 is
too many, so I removed the checks for the valid OUIs.  We already do a
checksum of the entire ethernet address, so extra checking against the
OUI shouldn't be needed.
2000-03-20 07:09:32 +00:00
Warner Losh
02c988c53e Add another Linksys OUI.
PR:		16922
Submitted by:	takawata@shidahara1.planet.sci.kobe-u.ac.jp
2000-03-13 09:42:09 +00:00
Warner Losh
47c6e6e849 Fix pccard ed driver, I think.
o Expose ed_stop and call it early to shutdown the hardware.
o When releasing the interrupt, pass the cookie for the irq, not
  a pointer to the cookie (this is the base problem).
o Release other resources used, just like the ep driver
1999-12-10 07:22:53 +00:00
Yoshihiro Takahashi
663631a5eb Set port_used and mem_used to the resource size instead of 1.
Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
1999-11-18 14:18:19 +00:00
Jonathan M. Bresler
aab735d218 fix misordering of two lines in this file. 1999-11-02 02:19:24 +00:00
Jonathan M. Bresler
4b9943106b rearrange order of tests for NE1000, NE2000, and Linksys
cards.   previous order caused computers with NE2000 cards
        to hang during boot.
1999-11-01 01:16:56 +00:00
Yoshihiro Takahashi
b81cbfc4af Change Linksys registers base/offset.
On NEC PC-98, asic_addr != nic_addr + 0x10.

Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
1999-10-31 09:05:20 +00:00
Warner Losh
12e0beb470 Add comments to Linksys probe code.
Add another OUI to those acceptible to linksys (this check may need to
be removed).
A couple of style(9) nits.
1999-10-28 04:53:46 +00:00