This is added to facilitate experiments building FreeBSD without
copyleft software.
If WITHOUT_GNU_DIFF is set no /usr/bin/diff or /usr/bin/diff3 will
be built.
If WITHOUT_GNU_GREP is set then BSD grep will be installed as
/usr/bin/bsdgrep or /usr/bin/grep, depending on the WITH_BSD_GREP
knob.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: Differential Revision: https://reviews.freebsd.org/D8288
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
GNU rcs is still available as a package:
- rcs: Latest GPLv3 GNU rcs version.
- rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.
Relnotes: yes
On some targets 'make showconfig' currently reports both 'no' and 'yes'
for some options. For example:
% make TARGET=mips showconfig | grep SSP
MK_SSP = no
MK_SSP = yes
Emit a warning on encountering a duplicated variable, and skip the
second entry.
Sponsored by: The FreeBSD Foundation
In FreeBSD 11 ELF Tool Chain's elfcopy is installed as objcopy by
default, with the option to switch back to GNU objcopy by setting
WITHOUT_ELFCOPY_AS_OBJCOPY in make.conf.
We plan to remove the outdated in-tree binutils in FreeBSD 12, so
remove the temporary transition aid.
Reviewed by: brooks, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7337
It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup).
Reviewed by: dteske
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7969
All remaining tools using rcs has been switched to directly use diff3(1):
- etcupdate(8)
- freebsd-update(8)
Note that the ident(1) tool is been already replaced long ago with a BSD
licensed version, as such it remains installed.
GNU rcs is still available from ports:
- rcs: newer GPLv3 version
- rcs57: the latest version from base (GPLv2)
The wl(4) driver supports pre-802.11 PCCard wireless adapters that
are slower than 802.11b. They do not work with any of the 802.11
framework and the driver hasn't been reported to actually work in a
long time.
Relnotes: yes
This is meant to install a new BE (boot environment) given a fully built
world/kernel. In addition to installing world and kernel in the new BE,
it also automatically performs /etc updates (using etcupdate or mergemaster)
and package updates (using pkg).
Because this process is performed in a new BE, it reduces the need for a
second reboot. It also means a reboot into a partially updated system (due
to install or hardware failure) can't happen.
Inspired by and similar in function to Solaris/illumos-style upgrades.
For all locales with variants:
- if no ambiguity on the locale (only one variant) just use the regular name
- if ambiguity, pick one as default and append @<variant> to the others
respecting POSIX
As a result:
- All the 3 components locales added recently are renamed to the usual 2
components version for all but sr_RS.UTF-8
- Set sr_RS.UTF-8 to the cyrillic variant
- Add sr_RS.UTF-8@latin
- Remove the symlinks aliases they were created to represent the 2 components
version as aliasas and are now useless
- Update the OptionalObsoleteFiles.inc and ObsoleteFiles.inc to reflect those
changes
Discussed with: ache@
Approved by: re@ (gjb)
This will print a set of variables from make on error using
MAKE_PRINT_VAR_ON_ERROR. It is already enabled for the DIRDEPS_BUILD.
It may make sense to enable this in the non-meta mode as well once
people are more used to its more verbose error output.
This makes it much simpler to see which .meta file is used when a
command files so that it may be inspected for the build command.
Suggested by: sjg
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
- Move the sys.mk filemon requirement to bsd.init.mk as a warning.
This is intended only to show when building directly in a subdirectory
without filemon loaded.
- Move the error into Makefile and only apply it when building
from the META_TGT_WHITELIST target list.
-DNO_FILEMON can be used to suppress both the warning and the error but
makes WITH_META_MODE less useful. It will only compare build commands
in this mode rather than track all dependencies.
This fixes installing from a jail which doesn't need filemon in this
phase [1].
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com> [1]
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
In order to allow using utimensat() in install(1), add futimens() and
utimensat() to -legacy.
The files futimens.c and utimensat.c are modified copies of the files under
lib/libc/sys/ since the libc versions use symbols that do not exist in the
libc on the build system (sys_futimens and sys_utimensat) . I expect the
next non-sweeping change to both sets of files to be to delete them, anyway.
This will allow reverting r299942 (which is a revert of r299850) enabling
nanosecond timestamps in install(1).
Reviewed by: bdrewery
makeman doesn't handle this since it would need to enable all
non-default options when checking enabling 1 option, which
then convolutes what is really affecting each other.
Fix typo made when adding the blacklistd.conf file to OptionalObsoleteFiles.inc
Submitted by: Herbert J. Skuhra ( herbert at mailbox.org )
Reviewed by: rpaulo
Approved by: rpaulo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6715
Install the blacklistd.conf man page, missed in the original commit.
Submitted by: Herbert J. Skuhra ( herbert at mailbox.org )
Reviewed by: rpaulo
Approved by: rpaulo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6702
This will still build the compiler for the target but will not build the
bootstrap cross-compiler in the cross-tools phase. Other toolchain
bootstrapping, such as elftoolchan and binutils, currently still occurs.
This will utilize the default CC (cc, /usr/bin/cc) as an external compiler.
This is planned to be on-by-default eventually.
This will utilize the __FreeBSD_cc_version compiler macro defined in the
source tree and compare it to CC's version. If they match then the
cross-compiler is skipped. If [X]CC is an external compiler (absolute
path) or WITHOUT_CROSS_COMPILER is already set, then this logic is skipped.
If the expected bootstrap compiler type no longer matches the found CC
compiler type (clang vs gcc), then the logic is skipped. As an extra
safety check the version number is also compared from the compiler to
the tree version.
Clang:
The macro FREEBSD_CC_VERSION is defined in:
lib/clang/include/clang/Basic/Version.inc
For clang -target will be used if TARGET_ARCH != MACHINE_ARCH. This
is from the current external toolchain logic. There is currently an
assumption that the host compiler can build the TARGET_ARCH. This
will usually be the case since we don't conditionalize target arch
support in clang, but it will break when introducing new
architectures. This problem is mitigated by incrementing the version
when adding new architectures.
GCC:
The macro FBSD_CC_VER is defined in:
gnu/usr.bin/cc/cc_tools/freebsd-native.h
For GCC there is no simple -target support when TARGET_ARCH !=
MACHINE_ARCH. In this case the opportunistic skip is not done. If we
add proper support for this case in external toolchain logic then it
will be fine to enable.
This relies on the macros being incremented whenever any change occurs
to these compilers that warrant rebuilding files. It also should never
repeat earlier values.
Reviewed by: brooks, bapt, imp
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6357
`BEFORE: netif` was already in etc/rc.d/atm1, so no additional changes
are needed in that script
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
