is a fatal fault if we are holding any non-sleepable locks. This should
cut down on the number of bogus LORs we currently get when the kernel
panics due to a NULL (or bogus) pointer dereference that goes wandering
off into the VM system which tries to acquire locks and then kicks off
the spurious LORs. This should probably be ported to all the archs at
some point.
Tested on: i386
The difference between WITNESS_CHECK() and WITNESS_WARN() is that
WITNESS_CHECK() should be used in the places that the return value of
witness_warn() is checked, whereas WITNESS_WARN() should be used in places
where the return value is ignored. Specifically, in a kernel without
WITNESS enabled, WITNESS_WARN() evaluates to an empty string where as
WITNESS_CHECK evaluates to 0. I also updated the one place that was
checking the return value of WITNESS_WARN() to use WITNESS_CHECK.
sysctl then it will clear the KTR buffer. Note that if you have active
KTR traces at the same time as a clear operation the behavior is undefined,
though it shouldn't panic.
they are. They should be NULL at this point, except if we're coming from
swapdev_strategy().
It should only affect the case where we're swapping directly on a file over
NFS.
into the card's memory.
# this eliminates a more of the ifdef soup in if_ed and if_edvar
# I've fixed the cbus drivers, but can't test them all easily.
If I've broken anything, please let me know.
by NGM_PPPOE_SETMODE message. When D-Link compat mode is on, we will
broadcast PADI with empty Service-Name to all listening hooks.
o Rewrite the compatibility options. Before we had two modes - standard
and non-standard (aka 3Com). Now we have standard mode and two compat
flags, that can be combined.
o Be consistent and do s/STUPID/3COM/g. I don't say that 3Com mode isn't
stupid, just want to make code easier to read.
to properly configure the right interface to use.
Also call the mediachg function when we set flags UP and are already
running. If this were a pure ifmedia driver, we'd not need to do this
since we'd be ignoring the linkX flags.
This reduces the number of ifdefs to support sub-devices a little as a
nice side effect. It also reduces the number of hpp interfaces
exposed by 33%.
man page that the ifconfig option link2 is used to disable the AUI
transceiver on the 3com boards (should also say HP PC Lan+). This
makes the connection clearer.
Add a note about why we set this flag prior to attaching the device.
We never set or clear the flag later, only test it. There can be no
races here, but this might be asthetically displeasing to some. Also
note that we may no longer need to have this knob at all as we may be
able to do it with the more sophisticated rc.d scripts we have today I
think the only reason it is there is because we didn't used to allow
its proper setting when configured to get the IP address via DHCP.
I'll note that this would be better handled by using ifmedia for all
ed cards, not just those with a miibus...
This is important with MegaLib, when issuing a GET_REBUILD_PROG since
it returns an error if the drive is not in rebuild state.
This will be MFC'ed shortly.
Submitted by: ps
Reviewed by: scottl
Found by: ambrisko
and resume methods so these events propagate through the device driver
hierarchy.
- In dma(4) enable the chaining of the DMA engine interrupt handler for
the LANCE devices via a dma_setup_intr(). This was commented out before
as I was unsure whether I'd use it but this is probably cleaner than
fiddling with the DMA engine interrupt in the LANCE driver directly.
- In ebus_setup_dinfo() free 'intrs' instead of 'reg' twice in case
setting up a child fails due to routing one of its interrupts fails. [1]
Found by: Coverity Prevent [1]
MFC after: 3 days
expands to the GCC format_arg attribute if supported.
This fixes a syntax error in <nl_types.h> for compilers/tools not
implementing the GCC __attribute__ extensions.
system LED on or off. Unlike the EBus LED AUXIO register where the
remaining bits are unused the upper bits of the SBus AUXIO register
are used to control other things like the link test enable pin of
the on-board NIC which we don't want to change as a side-effect.
- Remove the superfluous bzero()'ing of the softc obtained from
device_get_softc().
Reviewed by: yongari
MFC after: 3 days
PPPoE AC, servicing a specific Service-Name, when client sends a PADI
with an empty Service-Name. Should it reply with all available service
names or should it be silent? Our implementation had chosen the latter,
while some other had chosen the former (they say Linux and Cisco). Now
some PPPoE clients appear, that rely on the assumption that AC will
send all names in a PADO reply to a PADI with wildcard Service-Name.
These clients can't connect to FreeBSD AC.
I have requested comments from authors of RFC2516 via email, but
received no reply.
This change makes FreeBSD AC compatible with D-Link DI-614+ and
D-Link DI-624+ SOHO routers, and probably others.
Big thanks to D-Link's Russian office, namely Victor Platov, for
assistance and support in investigation and testing of this change.
Details:
o Split pppoe_match_svc() into three different functions serving
different purposes:
- pppoe_match_svc() - match non-empty Service-Name tag from PADI
against all available hooks in listening state.
- pppoe_find_svc() - check that given Service-Name is not yet
registered.
- pppoe_broadcast_padi() - send a copy of PADI packet with empty
Service-Name tag to all listening hooks.
o For NGM_PPPOE_LISTEN message use pppoe_find_svc().
o In ng_pppoe_rcvdata() in a PADI case use pppoe_match_svc() for
a non-empty Service-Name tag, and pppoe_broadcast_padi() in
either case.
A side effect from the above changes is that now pppoed(8) and mpd
will reply to a empty Service-Name PADI sending a PADO with two
Service-Name tags - an empty one and correct one. This is not fatal,
and will be corrected in pppoed(8) and mpd later. No need to update
node interface version.
Supported by: D-Link
linux_ioctl.[ch] : Implement LINUX_TIOCGPTN, which returns the pty number
linux_stats.c :
- Return the magic number for devfs.
- In various stats()-related functions, check that we're stating a
file in /dev/pts, and if so, change the st_rdev field to match what linux
expects to be there for a slave pty device. The glibc checks for this, and
their openpty() fails if it is no correct.
It should play nicely with the existing BSD ptys.
By default, the system will use the BSD ptys, one can set the sysctl
kern.pts.enable to 1 to make it use the new pts system.
The max number of pty that can be allocated on a system can be changed with the
sysctl kern.pts.max. It defaults to 1000, and can be increased, but it is not
recommanded, as any pty with a number > 999 won't be handled by whatever uses
utmp(5).
the resident page count matches the object size. We know it fully backs
its parent in this case.
Reviewed by: acl, tegge
Sponsored by: Isilon Systems, Inc.
statement. Specifically, a break statement that previously broke out of
the enclosing switch was not changed. Consequently, the enclosing loop
terminated prematurely.
This could result in "vm_page_insert: page already inserted" panics.
Submitted by: tegge
modified bit emulation traps on Alpha while holding locks in the
sysctl handler.
A better solution would be to pass a hint to the Alpha pmap code to
tell mark these pages as modified when they as they are being wired,
but that appears to be more difficult to implement.
Suggested by: jhb
MFC after: 3 days
placeholder similar to KTR_DEV. Explain the use of KTR_DEV and
KTR_SUBSYS in a comment as well.
- Retire KTR_WITNESS and instead have KTR_WITNESS default to off but use
KTR_SUBSYS if it is enabled.
Linux LSI MegaRaid tools can run on FreeBSD until Linux emulation.
Add in the Linux IOCTL shim and create the megadev0 device so
Linux LSI MegaRaid tools can run on FreeBSD until Linux emulation.
Add glue to build the modules but don't tie it into the build
yet until I test it from the CVS repo. via the mirror on an
amd64 machine.
Tie this into the Linux32 emulation on amd64 so the tools can
run on amd64 kernel.
Cleaned up by: ps (amr_linux.c)
ip_forward() would report back a zero MTU in ICMP needfrag messages
because on a IPSEC SP lookup failure no MTU got computed.
Fix this by changing the logic to compute a new MTU in any case if
IPSEC didn't do it.
Change MTU computation logic to use egress interface MTU if available
or the next smaller MTU compared to the current packet size instead
of falling back to a very small fixed MTU.
Fix associated comment.
PR: kern/91412
MFC after: 3 days
ia_hash only if it actually is an AF_INET address. All other places
test for sa_family == AF_INET but this one.
PR: kern/92091
Submitted by: Seth Kingsley <sethk-at-meowfishies.com>
MFC after: 3 days
If net.link.ether.inet.useloopback=1 and we send broadcast packet using our
own source ip address it may be rejected by uRPF rules.
Same bug was fixed for IPv6 in rev. 1.115 by suz.
PR: kern/76971
Approved by: glebius (mentor)
MFC after: 3 days
side effect that legacy ATA controllers at irq14 and irq15 cannot share
interrupts with anything else without major problems.
This fixes the ATAPI DMA problems some systems/devices have seen.
1) unregsiter kqueue filter for EVFILT_LIO.
2) free uma_zones.
3) call setsid directly to enter another session rather than
implementing by itself.
Submitted by: jhb
(1) Fix DMA alignment, based on bytes per sample.
feeder_rate.c:
Handle strayed bytes (mostly caused by #1) better.
This DMA alignment issues are extremely hard to reproduce unless
the user happen to have a 32bit capable soundcards (ATI IXP) and
knowledgeable enough to force it to operate under pure 32bit
operations on both record and play directions.
The success of the cluster allocation is checked through a field in the
mbuf structure. This change is non-functional but properly silences code
inspection tools.
Found by: Coverity Prevent(tm)
Coverity ID: CID807
Sponsored by: TCP/IP Optimization Fundraise 2005
up to date. Principle changes for this reelase is to support 2K Port Login
firmware. This allows us to support the 2322 (and 2422 4Gb) cards which only
come with the 2K Port Login firmware. The 2322 should now work- but we don't
have firmware sets for it in ispfw (as the change to load 2K Port Login f/w
hasn't been made- that f/w is so big it has to be loaded in more than one
chunk).
Other changes are the beginnings of cleaning up some long standing target
mode issues. The next changes here will incorporate a lot of bug fixes
from others.
Finally, some copyright cleanup and attempts to make the parts of the
driver that are FreeBSD specific start conforming more to FreeBSD style.
MFC after: 1 month
lookup() instead of EPERM when a DELETE or RENAME operation is
attempted on "..".
In kern_unlink(), remap EINVAL errors returned from namei() to EPERM
to match existing (and POSIX required) behaviour.
Discussed with: bde
MFC after: 3 days
feeder.h:
feeder.c:
- Implement scoring mechanisme to select best format for conversion.
This is actually part of newer format chaining procedures which
will be commited someday. Confusion during chaining process solved
by this scoring since it will try to reduce list of from/to formats
to a single, best format.
Related PR: kern/91683
channel.c:
- Simplify feeder building process since we have smarter format
chaining.
feeder_fmt.c:
- Add few more sign conversion feeders for 24 and 32 bit format.
feeder_rate.c:
- Force buffer / bytes allignment. Unaligned buffer may cause
panics during recording on pure 32bit sample format if it
involves feeder_rate as part of feeders chain.
Tested on: ATI IXP, force 32bit recording.
MFC after: 5 days
